Duali DE-950 SMART CARD READER User Manual DE 950 user manual Eng REV
Duali Inc. SMART CARD READER DE 950 user manual Eng REV
Duali >
users manual
Copyright ⓒ 2011 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use
this document in part or as a whole for any purposes other than those for which this document is disclosed. This
document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property
rights.
DUALi Inc.
Document Version: 1.0
Last Revised Date: 25th JAN. 2013
DE-950 User’s Manual
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any
application or service at any time without notice. DUALi provides customer assistance in various technical
areas, but does not have full access to data concerning the use and applications of customer's products.
Therefore, DUALi assumes no liability and is not responsible for customer applications or software design
or performance relating to systems or applications incorporating DUALi products. In addition, DUALi
assumes no liability and is not responsible for infringement of patents and/or any other intellectual or
industrial property rights of third parties, which may result from assistance provided by DUALi.
Composition of the information in this manual has been done to the best of our knowledge. DUALi does not
guarantee the correctness and completeness of the details given in this manual and may not be held liable
for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not
be completely avoided, we are always grateful for your useful tips.
We have our development center in South Korea to provide technical support. For any technical assistance
can contact our technical support team as below;
Tel: +82 31 213 0074
e-mail : sales@duali.com, lab@duali.com
FeliCa™ is registered trademark of SONY Corporation.
Mifare® is registered trademarks of NXP Semiconductors
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
3
Revision History
2013.01 (Ver. 1.0) : First Release
© Copyright 2000-2011 DUALi Inc.
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
4
CONTENTS
1. Introduction .................................................................................................................................... 5
2. Contents Confirmation ................................................................................................................... 5
3. Hardware Specifications................................................................................................................. 5
4. Installation ...................................................................................................................................... 6
5. Connection Diagram....................................................................................................................... 7
6. Operation & Usage.......................................................................................................................... 9
7. Output Format............................................................................................................................... 10
8. Function Configuration................................................................................................................. 11
9. Warning......................................................................................................................................... 12
10. Warranty & Service...................................................................................................................... 13
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
5
1. Introduction
DE-930 is refined design of proximity reader which supports Contactless ( ISO 14443 A/B type, Mifare®,
FeliCa™ ) and SAM. It also supports 26/32/34/64/66-bit Wiegand format for Host communication which is
the most widespread system. DE-950 is IP65 complaint water proof reader and it’s applicable to various
systems as Access control system, Time attendance system, Parking management or e-Payment system.
2. Contents Confirmation
- The following items are contained in DE-930 package.
Reader bracket Manual screw
(1 ea) (1 ea) (1 ea) (1 ea)
3. Hardware Specifications
Read Range Up to 3cm
Input Voltage/Current DC 12 V, 200 mA
LED/Beeper 2 LEDs(Red, Blue) / Magnetic Buzzer
Color BLACK(Body)
Operating Environment -20℃ ~ +60℃, 10~90% Humidity
Overall Size(WxHxD) 46 x 150 x 20mm
Output Format 32 / 34 / 64/ 66 bit Wiegand, RS-232/485(option)
3*4 Flat head
machine screw
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
6
4. Installation
1. Place the wall mount bracket on the wall and fix it tightly with Screw (Φ4mm Flat head) -4nos.
2. Connect the power and communication cable to DE-950’s Terminal Block. (refer to the picture as below)
3. Tilt the device slightly and insert to the wall mount from the top. Fix it tightly with 3*4 Flat head machine
screw.
<Picture 1.Installation>
※ Caution
- Do not push the device/ wall mount bracket when fixing it to the wall.
- Screw has to be re-considered depends on wall’s material and condition.
- Please place flat panel before wall mount bracket if the wall’s not flat. It could cause a problem to
assemble the device if the bracket bent.
3*4 Flat head machine
Φ4mm Flat head screw
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
7
5. Connection Diagram
Terminal block can be differ by choosing option (RS485 OR Wiegand ). See the table as below
Pin No. Name Cable color Description Cable Option
1 GND_SINGLE BLACK POWER
2 GND_SINGLE BLACK POWER
POWER
3 RS232_RX GRAY Comm.
4 RX232_TX VIOLET Comm.
RS232 Comm.
option
5 RS485_DP BROWN Comm.
6 RS485_DM GREEN Comm.
RS485 Comm.
option
7 PWR_IN RED POWER POWER
8 WD_DATA0 BLUE Comm.(Output)
9 WD_DATA1 YELLOW Comm.(Output)
10 EX_IO0_PT (LED) ORANGE Input
11 EX_IO1_PT (BEEP) WHITE Input
12 EX_IO2_PT (TAMPER) VIOLET Output
Wiegand
Comm. option
7 8 9 10 11 12
1 2 3 4 5 6
PIN Number
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
8
- Wiegand
7 8 9 10 11 12
RED BLUE YELLOW ORANGE WHITE VIOLET
1 2 NC NC NC NC
BLACK BLACK X X X X
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
9
6. Operation & Usage
1. Apply power of the Reader, check the Beep sound of buzzer and RED LED is on. It means
this device is ready.
2. When user present (authorized) contactless card to the reader, the reader makes 1 time of
Beep sound with blinking Blue LED . It sends Card’s data to Access controller through the
Wiegand data line.
3. When user present unauthorized card to the reader, its Red LED will be blinking.
4. Tamper (TAMP) :
This reader makes alarm when its case forced to open.
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
10
7. Output Format
7-1. Wiegand output format
1. Data format
- Data format can be decided by setting(Function Configuration). ( Chapter 8 )
<34bit>
First Bit 1 : Even parity of bit 2 ~ bit 17
Data[1-32] : ID number(transmission data)
Last Bit 34 : Odd parity of bit 18 ~ bit 33
<66bit>
First Bit 1 : Even parity of bit 2 ~ bit 33(Data[1-32])
Data[1-64] : ID number(transmission data)
FeliCa™ card – IDM data(8bytes)
Mifare® card – Card serial number(4bytes)+0x00(4bytes)
Last Bit 66 : Odd parity of bit 34 ~ bit 65(Data[33-64])
<32bit>
Data[0-31] : ID number(transmission data)
<64bit>
Data[0-63] :
FeliCa™ card – IDM data(8bytes)
Mifare® card – Card serial number(4bytes)+0x00(4bytes)
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
11
8. Function Configuration
Following is the Wiegand communication frame for setting
It is saved in flash memory. You don’t need setting after first setting.
(9600bps, 8 data, no parity, 1 stop bit)
STX LENH LENL CMD DATA LRC
0x02 0x00 0x02 0xE0 DATA[0] LRC
DATA[0] State Description
Bit7~4 RFU RFU
0 4byte ID(32 or 34bit) depend on parity setting(No.2)
Bit3
1 8byte ID(64 or 66bit) depend on parity setting(No.2)
0 Parity Send(34 or 66bit) depend on ID bytes(No.1)
Bit2
1 Parity Omit(32 or 64bit) depend on ID bytes(No.1)
0 Forward ID byte order
Bit1
1 Reverse ID byte order
0
Not Read MIFARE card in Security Mode
(Security Mode : SAM authentication for FeliCa,
Reader enters security mode when SAM exists when boot.)
Bit0
1 Read MIFARE card in Security Mode
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
12
9. Warning
EU
This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by
DUALi Inc. declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
FCC STATEMENT
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. -- Consult the dealer or an experienced radio/TV technician for help.
DE-950 User’s Manual
Version : 1.0 DUALi Inc. (http://www.duali.com)
13
10. Warranty & Service
‣ Warranty and Repair service
- DUALi Inc. warrants to the original consumer or other end user that this product, DE-950, is free from
defects in materials and workmanship for a period of 1 year from the date of purchase.
※ Note Warranty/non-warranty repair fees do not include any shipping charges.
‣ The damages(defaults) prescribed below are NOT to be covered by warranty.
- User’s misuse of part/component.
- Fault by the unqualified user’s own intention of repairs.
- Product’s inspection requirement.
- Adding certain functions or extension of system.
- Fault by User’s misuse against the product’s manual.
*Please contact our service team for the technical/ sales supports.
DUALi Inc.
1-309 Innoplex, 552 Wonchoen-dong, Youngtong-gu,
Suwon, Gyeonggi-do, Korea (zip: 443-380)
Tel : +82 31-213-0074
Fax : +82 31-213-0078
E-mail : lab@duali.com
Web-site : http://www.duali.com