Duali DE-950 SMART CARD READER User Manual DE 950 user manual Eng REV
Duali Inc. SMART CARD READER DE 950 user manual Eng REV
Duali >
users manual
DE-950 User’s Manual DUALi Inc. Document Version: 1.0 Last Revised Date: 25th JAN. 2013 Copyright ⓒ 2011 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights. DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products. In addition, DUALi assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by DUALi. Composition of the information in this manual has been done to the best of our knowledge. DUALi does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below; Tel: +82 31 213 0074 e-mail : sales@duali.com, lab@duali.com FeliCa™ is registered trademark of SONY Corporation. Mifare® is registered trademarks of NXP Semiconductors DE-950 User’s Manual Revision History 2013.01 (Ver. 1.0) : First Release © Copyright 2000-2011 DUALi Inc. Version : 1.0 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual CONTENTS 1. Introduction .................................................................................................................................... 5 2. Contents Confirmation ................................................................................................................... 5 3. Hardware Specifications................................................................................................................. 5 4. Installation ...................................................................................................................................... 6 5. Connection Diagram ....................................................................................................................... 7 6. Operation & Usage.......................................................................................................................... 9 7. Output Format............................................................................................................................... 10 8. Function Configuration................................................................................................................. 11 9. Warning......................................................................................................................................... 12 10. Warranty & Service...................................................................................................................... 13 Version : 1.0 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 1. Introduction DE-930 is refined design of proximity reader which supports Contactless ( ISO 14443 A/B type, Mifare®, FeliCa™ ) and SAM. It also supports 26/32/34/64/66-bit Wiegand format for Host communication which is the most widespread system. DE-950 is IP65 complaint water proof reader and it’s applicable to various systems as Access control system, Time attendance system, Parking management or e-Payment system. 2. Contents Confirmation The following items are contained in DE-930 package. 3*4 Flat head machine screw Reader (1 ea) bracket Manual screw (1 ea) (1 ea) (1 ea) 3. Hardware Specifications Read Range Up to 3cm Input Voltage/Current DC 12 V, 200 mA LED/Beeper 2 LEDs(Red, Blue) / Magnetic Buzzer Color BLACK(Body) Operating Environment -20℃ ~ +60℃, 10~90% Humidity Overall Size(WxHxD) 46 x 150 x 20mm Output Format 32 / 34 / 64/ 66 bit Wiegand, RS-232/485(option) Version : 1.0 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 4. Installation 1. Place the wall mount bracket on the wall and fix it tightly with Screw (Φ4mm Flat head) -4nos. 2. Connect the power and communication cable to DE-950’s Terminal Block. (refer to the picture as below) 3. Tilt the device slightly and insert to the wall mount from the top. Fix it tightly with 3*4 Flat head machine screw. Φ4mm Flat head screw 3*4 Flat head machine※ Caution - Do not push the device/ wall mount bracket when fixing it to the wall. - Screw has to be re-considered depends on wall’s material and condition. - Please place flat panel before wall mount bracket if the wall’s not flat. It could cause a problem to assemble the device if the bracket bent. Version : 1.0 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 5. Connection Diagram Terminal block can be differ by choosing option (RS485 OR Wiegand ). See the table as below PIN Number 10 11 12 Pin No. Name Cable color Description GND_SINGLE BLACK POWER GND_SINGLE BLACK POWER RS232_RX GRAY Comm. RS232 Comm. RX232_TX VIOLET Comm. option RS485_DP BROWN Comm. RS485 Comm. RS485_DM GREEN Comm. option PWR_IN RED POWER POWER WD_DATA0 BLUE Comm.(Output) WD_DATA1 YELLOW Comm.(Output) Wiegand 10 EX_IO0_PT (LED) ORANGE Input Comm. option 11 EX_IO1_PT (BEEP) WHITE Input 12 EX_IO2_PT (TAMPER) VIOLET Output Version : 1.0 Cable Option POWER DUALi Inc. (http://www.duali.com) DE-950 User’s Manual Wiegand Version : 1.0 10 11 12 RED BLUE YELLOW ORANGE WHITE VIOLET NC NC NC NC BLACK BLACK DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 6. Operation & Usage 1. Apply power of the Reader, check the Beep sound of buzzer and RED LED is on. It means this device is ready. 2. When user present (authorized) contactless card to the reader, the reader makes 1 time of Beep sound with blinking Blue LED . It sends Card’s data to Access controller through the Wiegand data line. 3. When user present unauthorized card to the reader, its Red LED will be blinking. 4. Tamper (TAMP) : This reader makes alarm when its case forced to open. Version : 1.0 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 7. Output Format 7-1. Wiegand output format 1. Data format - Data format can be decided by setting(Function Configuration). ( Chapter 8 ) <34bit> First Bit 1 : Even parity of bit 2 ~ bit 17 Data[1-32] : ID number(transmission data) Last Bit 34 : Odd parity of bit 18 ~ bit 33 <66bit> First Bit 1 : Even parity of bit 2 ~ bit 33(Data[1-32]) Data[1-64] : ID number(transmission data) FeliCa™ card – IDM data(8bytes) Mifare® card – Card serial number(4bytes)+0x00(4bytes) Last Bit 66 : Odd parity of bit 34 ~ bit 65(Data[33-64]) <32bit> Data[0-31] : ID number(transmission data) <64bit> Data[0-63] : FeliCa™ card – IDM data(8bytes) Mifare® card – Card serial number(4bytes)+0x00(4bytes) Version : 1.0 10 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 8. Function Configuration Following is the Wiegand communication frame for setting It is saved in flash memory. You don’t need setting after first setting. (9600bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD DATA LRC 0x02 0x00 0x02 0xE0 DATA[0] LRC DATA[0] State Description Bit7~4 RFU RFU 4byte ID(32 or 34bit) depend on parity setting(No.2) 8byte ID(64 or 66bit) depend on parity setting(No.2) Parity Send(34 or 66bit) depend on ID bytes(No.1) Parity Omit(32 or 64bit) depend on ID bytes(No.1) Forward ID byte order Reverse ID byte order Bit3 Bit2 Bit1 Not Read MIFARE card in Security Mode Bit0 Reader enters security mode when SAM exists when boot.) Version : 1.0 (Security Mode : SAM authentication for FeliCa, Read MIFARE card in Security Mode 11 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 9. Warning EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC STATEMENT CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Version : 1.0 12 DUALi Inc. (http://www.duali.com) DE-950 User’s Manual 10. Warranty & Service ‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-950, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include any shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component. - Fault by the unqualified user’s own intention of repairs. - Product’s inspection requirement. - Adding certain functions or extension of system. - Fault by User’s misuse against the product’s manual. *Please contact our service team for the technical/ sales supports. DUALi Inc. 1-309 Innoplex, 552 Wonchoen-dong, Youngtong-gu, Suwon, Gyeonggi-do, Korea (zip: 443-380) Tel : +82 31-213-0074 Fax : +82 31-213-0078 E-mail : lab@duali.com Web-site : http://www.duali.com Version : 1.0 13 DUALi Inc. (http://www.duali.com)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : pttno2-pc Create Date : 2013:02:14 09:56:47+09:00 Modify Date : 2013:02:14 09:56:47+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - DE-950_user_manual_Eng__REV.doc Creator : pttno2-pc Producer : Acrobat Distiller 9.5.3 (Windows) Document ID : uuid:21d7486e-faa3-4a28-9733-5a7cfa65d9be Instance ID : uuid:4be69404-ffe9-4896-89d3-3782e1e67759 Page Count : 13EXIF Metadata provided by EXIF.tools