Duali DE620 RF Card Reader User Manual

Duali Inc. RF Card Reader Users Manual

Users Manual

DE-620(RF CARD READER) Table of Contents1. Specifications2. OverviewUser´s Manual 3. Product Contents 4. Installation5. Operation 6. Dimension and Characteristic7. Technical SupportDUALi INC.Made in KOREApp(Document Number : EP13-09-001)
1. Specifications 2. OverviewCPU ARM 32-bit Cortex-M31.1 DE-600SHost CommunicationUSB 2.0(1.1)Compatible ISO 14443 Type-A (Include - Support read / write the ISO14443 Type A & B RF-Card, FeliCa card, Mifare Card Protocol.Card MIFARE) and Type-B, FeliCa card, ISO 7816 Contact Card and SIM TypeRead RangeInside 4 cm- Host Communication : USB1.2 CautionRead RangeInside 4 cmFrequency 13.56MHzPower USB Power (DC 5V), Max 250mA- Do not expose to the hot temperature, hot sunny, wet condition.ConsumptionOperating Environment-20ﾟC 〜 50ﾟC - Fragile on the shake, outside damage.-Sensitive to the installed environmentSize 68 ☓ 120 ☓ 28(mm)Sensitive to the installed environment, do not expose in the iron metal around the reader, it should cause the fatal defection
3. Product Contents 4. InstallationUSB CABLEPCREADER - USB communication : Download USB Driver from www.duali.com- Provided communication protocol:Length high + Length low + Command orResponse Code + Data Sl kitt-Sample working test program- Ask to the Service provider( Program provider ) for more command and function protocolUSB CABLEand function protocol
5. Operation 6. Dimension and Characteristic- You can test it with Duali test programto read / write on the specific card.5.1 Dimension Power LEDUSB connector- You can develop many different programsuch as Access, time & attendance, card issuing, PC security with the r id d D li DLL d Pr t lprovided Duali DLL and Protocol.- Functions.120mm* Mifare card Read/Write* ISO 14443 A-Type Card Read/Write* ISO 14443 B-Type Card Read/Write* FeliCa card Read/Write* ISO 7816 T=0 (Contact or SIM Type)* Buzzer On/Off* LED On/Off68mm28* LED On/Off6828mmAntenna
5 2 CharacteristicFCC (Federal Communications Commission)This equipment has been tested and found to comply with the limits for a5.2 Characteristic- Operation Temperature : -20℃ 〜 50℃ - Input Volatge : DC 5V (USB)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a- Card Reading Range : Inside 10 Cm7. Technical SupportHowever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Address : Room 505 Samsung Technopark,#471 Wonchen, Youngtong, Suwon, Gyeonggi443380, Korea.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technical for help.This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1Thi d i t h flit f dGyeonggi443380, Korea.- URL : www.duali.com1. This device may not cause harmful interference, and2. This device must accept ant interference received, including interference that may cause undesirable operation.Hereby, DUALi Inc. declares that this DE-620 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC- Tel : +82-31-213-0074WARNING: This equipment may generate or use radio frequency energy. . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Navigation menu