Dust Networks M2140 Smart Mesh Wireless Mote User Manual
Dust Networks, Inc. Smart Mesh Wireless Mote Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 879779 |
| Application ID | HpykBNrK/sbIcm0zasr2/w== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 31.34kB (391783 bits) |
| Date Submitted | 2007-12-14 00:00:00 |
| Date Available | 2007-12-21 00:00:00 |
| Creation Date | 2007-12-07 10:09:59 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2007-12-07 10:09:59 |
| Document Title | Microsoft Word - 020-00xx , M2140 datasheet_internal.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | gcharles |
PRELIMINARY Confidential SmartMesh-XDTM M2140/M2040 2.4 GHz Wireless Mote Product Description Dust Network’s network-ready SmartMesh-XD™ M2x40 allows OEMs to build solutions for the global market using ultra low-power, highly reliable system-on-chip (SoC) mesh networking solutions. The M2x40 combines a microprocessor and a standards-based 802.15.4 radio with robust networking capabilities built on top of the industry-leading Time Synchronized Mesh Protocol (TSMP) pioneered by Dust Networks. The M2x40 is tailored for use in battery- and line-powered wireless devices for applications that demand proven performance and scalability. The innovative radio design in the M2x40 operates in the global license-free 2.4 GHz band, with 80% less receiver current than comparable radios in the market. The combination of extremely high reliability and low power consumption enables applications that require very low installation cost for low-maintenance, long-term deployments. The M2x40 provides all the functionalities of a mote in an easy-to-integrate Mote-on-Chip™ (MoC). The multi-functional interface of the M2x40 gives it the flexibility to be used in a wide variety of applications, from industrial process monitoring to building control to machine health monitoring. The M2x40 requires no embedded programming, enabling OEMs to reduce the development time and cost for wireless sensor networking solutions. About SmartMesh® Dust Networks SmartMesh® products combine robust networking capabilities with TSMP, pioneered by Dust Networks, and standardsbased motes to provide proven wireless sensor networking systems. SmartMesh® systems achieve high network reliability in the face of unpredictable or harsh RF environments, utilize frequency hopping for interference rejection and have a typical battery life of 5-10 years. Each node in a SmartMesh-based network is a router, offering mesh-to-the-edge™ advantage for easy network integration, installation and maintenance. With a flexible platform and predictable network performance, OEMs can wirelessly enable a whole host of solutions for their industrial automation, building automation and defense markets. Key Features Easy Integration Ultra Low Power Consumption • • • • Innovative radio design that consumes 80% less power in receive mode than competing solutions Delivers additional 5X increase in battery life Automatic network-wide coordination for efficient power usage • • Reliable Networking • • • • • Uses the Time-Synchronized Mesh Protocol (TSMP) for high reliability (> 99.9% typical network reliability) Frequency hopping for interference rejection Mesh networking for built-in redundancy Every M2x40 acts as both an endpoint and a router, increasing network reliability: mesh-to-the-edge™ Automatic self-organizing mesh networking capability built-in M2x40 Mote Datasheet • • M2x40 provides all the functionality of a mote with zero embedded programming, or complex configuration Complete RF stage—balun, antenna matching circuitry, Power Amplifier, and antenna connector included High-level Data Link Control (HDLC) serial interface with bidirectional flow control Industrial temperature range –40 °C to +85 °C FCC, IC and CE modular RF certifications (pending) 802.15.4 Standard Radio Dust Networks™ • • • • • Global 2.4 GHz license-free band: suitable for use in North America, Europe and most of Asia +8 dBm (6.3 mW) conducted RF output power –90 dBm receiver sensitivity 300 m outdoor range (typical) Direct-sequence spread spectrum (DSSS) for additional interference rejection PRELIMINARY Confidential Table of Contents 1.0 Absolute Maximum Ratings ................................................................................4 2.0 Normal Operating Conditions .............................................................................4 3.0 Electrical Specifications .....................................................................................5 4.0 Timing Values.....................................................................................................6 5.0 Radio..................................................................................................................6 5.1 Detailed Radio Specifications ................................................................................ 6 5.2 Antenna Specifications......................................................................................... 7 6.0 Pinout ................................................................................................................8 6.1 M2x40 Pinout ..................................................................................................... 8 7.0 Mote Boot Up......................................................................................................9 7.1 Power-on Sequence............................................................................................. 9 7.2 Inrush Current.................................................................................................... 9 7.3 Serial Interface Boot Up ......................................................................................10 7.3.1 M2x40 Serial Interface Boot Up......................................................................10 8.0 Interfaces ........................................................................................................10 8.1 Timestamps ......................................................................................................10 ¯¯¯ Signal ..............................................................................................11 8.2 Status LED 8.3 Serial Interface..................................................................................................11 8.3.1 Serial Interface Overview ..............................................................................11 8.3.2 Serial Interface Timing Requirements .............................................................13 9.0 8.3.2.1 CTS Byte-level Handshake .....................................................................13 8.3.2.2 Data Flow Out of the Mote Serial Port ......................................................14 8.3.2.3 Data Flow Into the Mote Serial Port .........................................................14 Packaging Description......................................................................................15 9.1 Mechanical Drawing............................................................................................15 9.2 Soldering Information .........................................................................................16 10.0 Regulatory and Standards Compliance .............................................................16 10.1 FCC Compliance...........................................................................................16 10.1.1 FCC Testing ................................................................................................16 10.1.2 FCC-approved Antennae ...............................................................................17 10.1.3 OEM Labeling Requirements ..........................................................................17 10.2 Industry Canada (IC) Compliance...................................................................17 10.2.1 IC Testing...................................................................................................17 10.2.2 IC-approved Antennae..................................................................................17 10.2.3 OEM Labeling Requirements ..........................................................................17 10.3 CE Compliance ............................................................................................17 10.3.1 Declaration of Conformity .............................................................................17 10.3.2 European Compliance ...................................................................................18 10.3.3 OEM Labeling Requirements ..........................................................................18 10.3.4 Restrictions.................................................................................................18 M2x40 Mote Datasheet Dust Networks™ PRELIMINARY 10.4 11.0 Confidential Industrial Environment Operation...................................................................18 Ordering Information .......................................................................................18 M2x40 Mote Datasheet Dust Networks™ PRELIMINARY 1.0 Confidential Absolute Maximum Ratings The absolute maximum ratings shown below should under no circumstances be violated. Permanent damage to the device may be caused by exceeding one or more of these parameters. Table 1 Absolute Maximum Ratings Parameter Min Typ Max Units Supply voltage (Vcc to GND) –0.3 3.6 Voltage on any digital I/O pin –0.3 VCC + 0.3 Comments up to 3.6 Input RF level 10 dBm +85 °C Lead temperature +230 °C VSWR of antenna 3:1 Storage temperature range –45 Input power at antenna connector For 10 seconds * All voltages are referenced to GND Caution! The M2x40 can withstand an electrostatic discharge of up to 2 kV Human Body Model (HBM) or 200 V Machine Model (MM) applied to any header pin, except the antenna connector. The antenna input can withstand a discharge of up to 50 V. 2.0 Table 2 Normal Operating Conditions Normal Operating Conditions Parameter Operational supply voltage range (between Vcc and GND) Voltage on analog input pins Min Typ Max Units 2.75 3.3 1.8 200 mVp-p TBD mA TX during OTAP*. (TBD) ms max TBD mA TX, 5 ms maximum TBD mA Searching for network, 60 minutes maximum TBD mA Radio turn on, (TBD) μs max TBD mA boot_delay (see Table 7) TBD mA TX during OTAP*. (TBD) ms max TBD mA TX, 5 ms maximum TBD mA Searching for network, 60 minutes maximum TBD mA Radio turn on, (TBD) μs max TBD mA boot_delay (see Table 7) Voltage supply noise Comments Including noise and load regulation 50 Hz–15 MHz Peak current Power amplifier enabled Peak current Power amplifier disabled Average current M2x40 Mote Datasheet Dust Networks™ PRELIMINARY Confidential Power amplifier enabled TBD µA Power amplifier disabled TBD µA Storage and operating temperatures -40 Maximum allowed temperature ramp during operation Operating relative humidity 10 Assuming 80 byte packets, 1 per 2 minutes, data-only mote, 3V, 25 °C +85 °C °C/min –40 °C to +85 °C 90 % RH Non-condensing Max Units *OTAP = over-the-air programming of motes Unless otherwise noted, Table 3 assumes Vcc is 3.0 V. Table 3 Current Consumption Parameter Min Typ Comments Transmit Power amplifier enabled 18 mA Power amplifier disabled mA Receive mA Sleep µA 3.0 Table 4 Electrical Specifications Device Load Parameter Min Typ Total capacitance Max Units 15.5 µF Comments Vcc to GND Unless otherwise noted, Vcc is 3.0 V and temperature is –40 °C to +85 °C Table 5 Digital I/O Type 1 Digital Signal Min Typ Max Units VIL (low-level input voltage) –0.3 0.6 VIH (high-level input voltage) 0.8 x VCC Vcc + 0.3 0.4 VOL (low-level output voltage) VOH (high-level output voltage) 2.4 Comments Digital current Output source (single pin) 3.7 mA 25 °C Output sink (single pin) 2.0 mA 25 °C 50 nA 25 °C Input leakage current This current level guarantees that the output voltage meets VOH and VOL specifications above. Table 6 Digital I/O Type 2 Digital Signal Min Typ Max Units Comments VIL (low-level input voltage) –0.3 0.6 VIH (high-level input voltage) 0.8 x VCC VCC + 0.3 0.6 IOL < 0.6 mA, 85 °C VCC IOH > –0.6 mA, 85 °C VOL (low-level output voltage, multi-function I/O configured as output) VOH low-level output voltage, multi-function I/O configured as output) M2x40 Mote Datasheet VCC – 0.6 Dust Networks™ PRELIMINARY Digital Signal Min Typ Max Confidential Units Comments Digital current Output source (single pin, multifunction I/O configured as output) 0.6 mA 25 °C Output sink (single pin, multifunction I/O configured as output) 0.6 mA 25 °C 50 nA 25 °C Input leakage current This current level guarantees that the output voltage meets VOH and VOL specifications above. 4.0 Timing Values Table 7 Timing Values Variable Meaning Min ¯¯¯ pulse width RST Reset timing interbyte_timeout The time between consecutive data bytes on the serial port cannot exceed this time. interpacket_delay The sender of an HDLC packet must wait at least this amount of time before sending another packet. 20 ack_delay ¯¯¯¯¯¯¯ and the The max time delay between the MT_RTS ¯¯¯¯¯¯¯. receiver’s acknowledge, SP_CTS time_ack_timeout Max Units 125 µs ms ms 500 ms ¯¯¯¯ pin activation requests The mote responds to all TIME within this time. 100 ms diag_ack_timeout The mote responds to all requests within this time. 125 ms min_strobe_length The length of the strobe signal. boot_delay The time between mote power up and serial interface availability. 5.0 Radio 5.1 Detailed Radio Specifications Parameter Operating frequency Min Typ 2.4000 500 Max Units 2.4835 GHz Number of channels 15 Channel separation MHz 2.7 MHz Occupied channel bandwidth Frequency Accuracy -50 +50 Receiver operating input level Receiver sensitivity M2x40 Mote Datasheet 6250 ms Comments At –20 dBc kHz Modulation Raw data rate ns IEEE 802.15.4 DSSS 250 Kbps -10 dBm –93 dBm At 50% PER, VDD = 3 V, 25 °C –90 dBm At 1% PER, VDD = 3 V, 25 °C, (inferred by 50% PER measurement) Dust Networks™ PRELIMINARY Parameter Min Typ Max Confidential Units Comments Output power, conducted Power amplifier enabled +8 dBm VDD = 3 V, 25 °C Power amplifier disabled –3 dBm VDD = 3 V, 25 °C Indoor 100 Outdoor 300 Indoor 25 Outdoor 200 Range* Power amplifier enabled: 25 °C, 50% RH, 1 meter above ground, +2 dBi omni-directional antenna Power amplifier disabled: * Actual RF range performance is subject to a number of installation-specific variables including, but not restricted to ambient temperature, relative humidity, presence of active interference sources, line-of-sight obstacles, near-presence of objects (for example, trees, walls, signage, and so on) that may induce multipath fading. As a result, actual performance varies for each instance. 5.2 Antenna Specifications A MMCX-compatible male connector is provided on board for the antenna connection. The antenna must meet specifications in Table 8. For a list of FCC-approved antennae see section 10.1.2. Table 8 Antenna Specifications Parameter Value Frequency range 2.4 – 2.4835 GHz Impedance 50 Ω Gain +2 dBi maximum Pattern Omni-directional Maximum VSWR 3:1 Connector MMCX* * The M2x40 can accommodate the following RF mating connectors: • MMCX straight connector such as Johnson 135-3402-001, or equivalent • MMCX right angle connector such as Tyco 1408149-1, or equivalent When the mote is placed inside an enclosure, the antenna should be mounted such that the radiating portion of the antenna protrudes from the enclosure. The antenna should be connected using a MMCX connector on a coaxial cable. For optimum performance, allow the antenna to be positioned vertically when installed. M2x40 Mote Datasheet Dust Networks™ PRELIMINARY 6.0 Confidential Pinout The M2x40 has two 11-pin Samtec MTMM-111-04-S-S-175-3 (or equivalent) connectors on the bottom side for handling all of the I/O. The third pin in each of the connectors is not populated, and serves as a key for alignment. The connectors are mounted on opposite edges of the long axis of the M2x40. 6.1 M2x40 Pinout The M2x40 provides a bidirectional flow-controlled serial interface (serial protocol is specified in section Error! Reference source not found.). Table 9 M2x40 Pin Functions Pin Number Pin Name Description Type Direction GND Ground Power – VCC Power Power – KEY (no pin) – – – RX UART Rx Type 2 In TX UART Tx Type 2 Out ¯¯¯¯ LED Active low led turn on Type 1 Out ¯¯¯¯¯¯¯ MT_RTS UART active low mote ready to send Type 2 Out ¯¯¯¯¯¯¯ MT_CTS UART active low mote clear to send Type 1 Out ¯¯¯¯¯¯¯ SP_CTS UART active low serial peripheral clear to send Type 2 In 10 ¯¯¯¯ TIME Falling edge time request Type 2 In 11 Mode_pin_B Selects between Mode 1 & Mode 3 operation (9600bps & 115.2 kbps) Type 2 In 12 ¯¯¯¯¯¯¯¯¯¯¯¯ FLASH_P_EN Active low flash power enable – – 13 No connection – – – 14 No connection – – – 15 No connection – – – 16 No connection – – – 17 SCK SPI clock – – 18 MOSI SPI master out slave in serial data – – 19 MISO SPI master in slave out serial data – – 20 KEY (no pin) – – – 21 ¯¯¯¯¯¯ SPI_CS Active low flash chip select – – 22 ¯¯¯ RST Active low reset Type 1 In ¯¯¯ input pin is internally pulled up, and connecting it is optional. When driven active low, the mote is hardware reset The RST ¯¯¯ pin. Note that the mote may also be until the signal is deasserted. Refer to section 7.1 for timing requirements on the RST reset using the mote serial command (see Mote Serial API guide). ¯¯¯¯ input pin is optional, and must either be driven or pulled up with a 5.1 MΩ resistor. Unless noted otherwise, all The TIME signals are active low. M2x40 Mote Datasheet Dust Networks™ PRELIMINARY 7.0 Mote Boot Up 7.1 Power-on Sequence Confidential The M2x40 mote has internal power-on-reset circuits that ensure that the mote will properly boot. However, for the poweron-reset circuitry to function properly, the external power supply must meet the timing shown in Figure 1 and specified in Table 10. Figure 1 External Power Supply Timing Requirement The following reset sequence (shown in Figure 2 and specified in Table 10) is required for external power supplies that fail to meet the requirement above. Figure 2 Power-on Sequence Table 10 Power-on Sequence Parameter TVcc2RST Min Typ Units Comments ms TVccRv1v2 7.2 Max 10 µs Inrush Current During power on, the mote can be modeled as a lumped impedance, as shown in Figure 3 . With a source impedance (Rsrc) of 1 Ω, the inrush current on the mote appears as shown in Figure 4. Figure 3 M2x40 Equivalent Series RC Circuit M2x40 Mote Datasheet Dust Networks™ PRELIMINARY Confidential Vcc Inrush Current (Power On with Supply Impedance of 1 Ohm) 1000 Current (mA) 750 500 250 50 100 150 200 250 Time (us) Figure 4 VCC Inrush Current 7.3 Serial Interface Boot Up 7.3.1 M2x40 Serial Interface Boot Up ¯¯¯¯¯¯¯ line is high (inactive). The M2x40 serial interface boots within boot_delay (see Error! Upon M2x40 power up, the MT_CTS Reference source not found.) of the mote powering up, at which time the M2x40 will transmit an HDLC Mote Information packet. Note that full handshake (see section 8.3.2) is in effect and is required to receive this packet. 8.0 Interfaces 8.1 Timestamps The M2x40 has the ability to deliver network-wide synchronized timestamps. The M2x40 sends a time packet (as described in Error! Reference source not found.) through its serial interface when one of the following occurs: • Mote receives an HDLC Get Parameter request for time/state (see Error! Reference source not found.) • ¯¯¯¯ signal is activated On the M2x40, mote TIME ¯¯¯¯ pin is optional and has the advantage of being more accurate. The value of the timestamp is taken within The TIME ¯¯¯¯ signal activation. If the HDLC request is used, because of packet processing, the approximately 1 ms of receiving a TIME value of the timestamp may be captured several milliseconds after receipt of the packet. The real time delivered to the sensor processor is relative to the real time clock on the Manager, which serves as the Network Real Time Clock (NRTC). The time stamp skew across the network is guaranteed to be within ±250 ms of the NRTC. Figure 5 Network Real Time Clock When the time pin is activated for at least min_strobe_length (see Error! Reference source not found.), the mote responds by sending the time packet within 100 ms delay. M2x40 Mote Datasheet Dust Networks™ 10 PRELIMINARY Figure 6 Confidential Operation of Time Pin ¯¯¯ Signal Status LED 8.2 ¯¯¯ . This signal indicates network connectivity information The M2x40 provides an output that can be used to drive a status LED which is most useful during mote installation. Alternatively, the mote’s network status may be polled via serial using the Get Parameter request with the mote state parameter (see section Mote Serial API Guide). Table 11 ¯¯¯ Signal Status LED ¯¯¯ Signal Behavior LED Mote State High Off, or in sleep mode Single blink (750 ms low, 3 s high) On, and searching for potential network Double blink (750 ms low, 750 ms high, 750 ms low, 3 s high) On, and attempting to join the network Triple blink (750 ms low, 750 ms high, 750 ms low, 750 ms high, 750 ms low, 3 s high) On, and attempting to establish redundant links Low On, fully configured into network with redundant parents 8.3 Serial Interface 8.3.1 Serial Interface Overview The M2x40 offers a well-defined five-signal serial interface that is optimized for low-powered embedded applications. This ¯¯¯¯¯¯¯ , MT_CTS ¯¯¯¯¯¯¯ , serial interface offers a serial port comprised of the data pins (TX, RX) as well as handshake pins (MT_RTS ¯¯¯¯¯¯¯ SP_CTS) used for bidirectional flow control. Through this port, the M2x40 provides a means of transmitting and receiving serial data through the wireless network, as well as a command interface that provides synchronized time stamping, local configuration, and diagnostics. The serial handshake provides for flow control of packets transmitted via the M2x40 serial interface. Packet delineation and error control are handled separately. The handshake supports the following: • Full-duplex communication • Bidirectional byte-level flow control ¯¯¯¯¯¯¯ ,MT_CTS ¯¯¯¯¯¯¯ , The five-signal serial port is comprised of the data pins (TX, RX) as well as the handshake pins (MT_RTS ¯¯¯¯¯¯¯ SP_CTS) used for bidirectional flow control. This port supports 9600 bps operation in full-duplex mode. The handshake signals are active low. Table 12 Mode 1 and Mode 3 Serial Parameters Parameter Mode 1 Mode 3 Serial Control signals 5-signal 5-signal Flow control Bidirectional Bidirectional 9600 bps 115.2 kbps Bit rate M2x40 Mote Datasheet Dust Networks™ 11 PRELIMINARY Confidential The following diagram illustrates the pins used in the handshaking protocol. Figure 7 Diagram of Pins Used in Handshaking Protocol M2x40 Mote Datasheet Dust Networks™ 12 PRELIMINARY Table 13 Confidential Pin Usage Pin Usage RX, TX Used for serial data flow into and out of the mote. ¯¯¯¯¯¯¯ MT_RTS This signal goes active low when the mote is ready to send a serial packet. The signal ¯¯¯¯¯¯¯ signal from the microprocessor goes active low (indicating stays low until the SP_CTS readiness to receive a packet) or the ack_delay timeout (see Error! Reference source not found.) expires. ¯¯¯¯¯¯¯ should transition from high to active low in response to the MT_RTS ¯¯¯¯¯¯¯ signal from SP_CTS the mote. This indicates that the microprocessor is ready to receive serial packets. ¯¯¯¯¯¯¯ after receiving each byte. After Following this, the microprocessor should strobe SP_CTS ¯¯¯¯¯¯¯ signal. all packets are received, the microprocessor should de-assert the SP_CTS SP_CTS ¯¯¯¯¯¯¯ MT_CTS ¯¯¯¯¯¯¯ indicates the state of the network connection and availability of data buffers to MT_CTS receive packets destined for the network. Once the mote has established wireless network ¯¯¯¯¯¯¯ pin to signify availability to accept serial packets for connection, it will use the MT_CTS wireless transmission. At certain critical times during communication, the mote may bring ¯¯¯¯¯¯¯ high. MT_CTS ¯¯¯¯¯¯¯ will remain high if the mote does not have enough buffer space to MT_CTS accept another packet. It will also remain high if the mote is not part of the network. OEM ¯¯¯¯¯¯¯ pin is low before initiating each serial packet for designs must check that the MT_CTS wireless transmission. Note that the mote may receive local serial packets at any time ¯¯¯¯¯¯¯ state. regardless of the MT_CTS ¯¯¯¯¯¯¯ in Upon receipt of the first byte of the HDLC packet, the mote strobes MT_CTS acknowledgement of each subsequent byte. After the last byte of the packet is received, ¯¯¯¯¯¯¯ switches back to signaling the availability of the network connection and data MT_CTS buffers. The microprocessor should wait a minimum of interpacket_delay (see Error! Reference source not found.) before initiating another packet transmission. The mote can accept local commands (packets that are not sent through the network) at ¯¯¯¯¯¯¯ pin may be ignored when initiating these packets. any time, and the status of the MT_CTS ¯¯¯¯¯¯¯ (MT_CTS acknowledges each byte, as specified in section 8.3.2.1. For a list of local commands, see Mote Serial API guide.) ¯¯¯¯ pin is optional and can be used for triggering a timestamp packet. For details, The TIME refer to 8.1. ¯¯¯¯ TIME 8.3.2 8.3.2.1 Serial Interface Timing Requirements CTS Byte-level Handshake The following diagram shows generic CTS byte-level flow control timing. The following details are applicable to both ¯¯¯¯¯¯¯ and ¯¯¯¯¯¯¯ MT_CTS SP_CTS. Figure 8 CTS Byte-level Flow Control Timing M2x40 Mote Datasheet Dust Networks™ 13 PRELIMINARY Confidential Timeouts T1, T2, and T3 are defined as follows (refer to Error! Reference source not found. for values): T1: interbyte_timeout—Maximum time between the transmit module sending a byte and the receiving module acknowledging the byte using CTS (requests the next byte). T2: interpacket_delay—For communications into the mote, the minimum time after the mote receives the last byte of a packet before it can start receiving the next packet. For communications out of the mote, the minimum time between the ¯¯¯¯¯¯¯ to request to send mote receiving acknowledgement of the last byte reception (or timeout) and the mote driving MT_RTS another packet. T3: min_strobe_length—The minimum length of time that CTS must be held active to be recognized by the receiver. ¯¯¯¯¯¯¯ is In idle mode or upon expiration of the interbyte_timeout, the transmit side treats CTS as level triggered (MT_RTS disregarded in case of local serial packets). After transfer of the first byte of a packet, the meaning of CTS signal is changed to a byte acknowledgement strobe, active on a falling edge. In other words, CTS becomes a request signal for the next byte of a packet. This acknowledgement strobe will occur for all packets (both local and network packets). Whenever timeouts T1 or T2 occur, the packet is discarded and both sides switch to idle mode and start hunting for the next HDLC packet, assuming CTS active low. If a packet is transferred completely, the interbyte_timeout after the last byte naturally takes care of switching to idle mode. 8.3.2.2 Data Flow Out of the Mote Serial Port Figure 9 illustrates the process that the mote uses to transmit serial data: 1. The mote ensures the interpacket_delay time has passed since the last transmission. 2. ¯¯¯¯¯¯¯ to active, waits for a falling edge on ¯¯¯¯¯¯¯ The mote drives MT_RTS SP_CTS. Timeout is defined as ack_delay (see Error! Reference source not found.), and is long enough to handle the worst-case response. 3. ¯¯¯¯¯¯¯ to inactive and drops the packet. If the mote times out before the ¯¯¯¯¯¯¯ SP_CTS becomes active, the mote restores MT_RTS 4. If ¯¯¯¯¯¯¯ SP_CTS is active, then the mote transmits the first byte and follows the CTS byte-level handshaking rules for subsequent bytes. 5. ¯¯¯¯¯¯¯ is restored to inactive after the ack_delay timeout has expired. MT_RTS Figure 9 Packet Transmission from Mote 8.3.2.3 Data Flow Into the Mote Serial Port Figure 10 illustrates the process the mote uses to receive serial data. The mote may receive serial packets for local commands (not intended for wireless transmission) at any time regardless of ¯¯¯¯¯¯¯ status. the MT_CTS The mote signals its readiness to receive serial packets for wireless transmission (serial payload command 0x80) by driving ¯¯¯¯¯¯¯ active low. The mote will drive MT_CTS ¯¯¯¯¯¯¯ low within interpacket_delay time (see Error! Reference source not MT_CTS found.) after the transmission of the last packet. M2x40 Mote Datasheet Dust Networks™ 14 PRELIMINARY Figure 10 Packet Transmission to Mote 9.0 Packaging Description 9.1 Mechanical Drawing Figure 11 Confidential M2x40 Mote Mechanical Drawing M2x40 Mote Datasheet Dust Networks™ 15 PRELIMINARY Figure 12 9.2 Confidential M2x40 Mote Footprint Soldering Information The M2x40 can be hand soldered with a soldering iron at 230 °C. The soldering iron should be in contact with the pin for 10 seconds or less. The M2x40 is also suitable for eutectic PbSn reflow. 10.0 Regulatory and Standards Compliance 10.1 FCC Compliance The M2x40 mote complies with Part 15.247 modular (Intentional Radiator) of the FCC rules and regulations. Changes or modifications not expressly approved by Dust Networks could void the user's authority to operate the equipment. 10.1.1 FCC Testing In order to fulfill FCC certification requirements, products incorporating the M2x40 mote must comply with the following: 1. An external label must be provided on the outside of the final product enclosure specifying the FCC identifier as described in 10.1.3 below. 2. The antenna must be electrically identical to the FCC-approved antenna specifications for the M2x40 as described in 10.1.2 with the exception that the gain may be lower than specified in Table 14. 3. The device integrating the M2x40 mote may not cause harmful interference, and must accept any interference received, including interference that may cause undesired operation. M2x40 Mote Datasheet Dust Networks™ 16 PRELIMINARY 4. Confidential An unintentional radiator scan must be performed on the device integrating the M2x40 mote, per FCC rules and regulations, CFR Title 47, Part 15, Subpart B. See FCC rules for specifics on requirements for declaration of conformity. 10.1.2 FCC-approved Antennae The following are FCC-approved antenna specifications for the M2x40 Table 14 FCC-approved Antenna Specifications for the M2x40 Gain Pattern +2 dBi maximum 10.1.3 Polarization Omni-directional Vertical Frequency 2.4-2.4835 GHz Connector MMCX OEM Labeling Requirements The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. The outside of the final product enclosure must have a label with the following (or similar) text specifying the FCC identifier. The FCC ID and certification code must be in Latin letters and Arabic numbers and visible without magnification. Contains transmitter module FCC ID: SJC-M2140 Or Contains FCC ID: SJC-M2140 10.2 Industry Canada (IC) Compliance 10.2.1 IC Testing The M2x40 is certified for modular Industry Canada (IC) RSS-210 approval. The OEM is responsible for its product to comply with IC ICES-003 and FCC Part 15, Sub. B - Unintentional Radiators. The requirements of ICES-003 are equivalent to FCC Part 15 Sub. B and Industry Canada accepts FCC test reports or CISPR 22 test reports for compliance with ICES-003. 10.2.2 IC-approved Antennae The following are IC-approved antenna specifications for the M2x40. Table 15 IC-approved Antenna Specifications for the M2x40 Gain Pattern +2 dBi maximum 10.2.3 Polarization Omni-directional Vertical Frequency 2.4-2.4835 GHz Connector MMCX OEM Labeling Requirements The Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are met. The outside of the final product enclosure must have a label with the following (or similar) text specifying the IC identifier. The IC ID and certification code must be in Latin letters and Arabic numbers and visible without magnification Contains IC: 5853A-M2140 10.3 CE Compliance 10.3.1 Declaration of Conformity We, Dust Networks, of 30695 Huntwood Ave Hayward, CA 94544 USA declare under our sole responsibility that our product, SmartMesh-XD M2140 and M2040, and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards ETSI EN 300 328, ETSI EN 301 489-17 and EN 60950, following the provisions M2x40 Mote Datasheet Dust Networks™ 17 PRELIMINARY Confidential of Radio Equipment and Telecommunication Terminal Equipment directive 99/5/EC with requirements covering EMC directive 89/336/EEC, and Low voltage directive 73/23/EEC. 10.3.2 European Compliance If the M2140 and M2040 motes are incorporated into a product, the manufacturer must ensure compliance of the final product to the European harmonized EMC and low-voltage/safety standards. A Declaration of Conformity must be issued for each of these standards and kept on file as described in Annex II of the R&TTE Directive. Furthermore, the manufacturer must maintain a copy of this M2140/M2040 user documentation and ensure the final product does not exceed the specified power ratings, antenna specifications, and/or installation requirements as specified in the user manual. If any of these specifications are exceeded in the final product, a submission must be made to a notified body for compliance testing to all required standards. 10.3.3 OEM Labeling Requirements The ‘CE’ marking must be affixed to a visible location on the OEM product. The CE mark shall consist of the initials “CE” taking the following form: If the CE marking is reduced or enlarged, the proportions given in the drawing below must be respected. The CE marking must have a height of at least 5mm except where this is not possible on account of the nature of the apparatus. The CE marking must be affixed visibly, legibly, and indelibly. Furthermore, since the usage of the 2400 – 2483.5 MHz band is not harmonized throughout Europe, the Restriction sign must be placed to the right of the ‘CE’ marking as shown below. See the R&TTE Directive, Article 12 and Annex VII for more information. Figure 13 CE Label Requirements 10.3.4 Restrictions France—France imposes restrictions on the 2.4 GHz band. Go to www.art-telecom.Fr or contact Dust Networks for more information. Norway—Norway prohibits operation near Ny-Alesund in Svalbard. More information can be found at the Norway Posts and Telecommunications site (www.npt.no). 10.4 Industrial Environment Operation The M2x40 is designed to meet the specifications of a harsh industrial environments which includes: • Shock and Vibration—The M2x40 complies with high vibration pipeline testing, as specified in IEC 60770-1. • Hazardous Locations—The M2x40 design is consistent with operation in UL Class 1 Division 1 and Division 2 hazardous locations. • Temperature Extremes—The M2x40 is designed for industrial storage and operational temperature range of –40 °C to +85 °C. 11.0 Ordering Information Product List: M2x40: Marconi / 2.4 GHz MHz Mote Contact Information: Dust Networks 30695 Huntwood Ave. M2x40 Mote Datasheet Dust Networks™ 18 PRELIMINARY Confidential Hayward, CA 94544 Toll-Free Phone: 1 (866) 289-3878 Website: www.dustnetworks.com Email: sales@dustnetworks.com M2x40 Mote Datasheet Dust Networks™ 19 PRELIMINARY Confidential Trademarks Dust Networks™, the Dust Networks logo, SmartMesh-XT™, SmartMesh-XD™, Marconi™, mesh-to-the-edge™, and Mote-on-Chip™ are trademarks of Dust Networks, Inc. Dust® and SmartMesh® are registered trademarks of Dust Networks, Inc. All third-party brand and product names are the trademarks of their respective owners and are used solely for informational purposes. Copyright This documentation is protected by United States and international copyright and other intellectual and industrial property laws. It is solely owned by Dust Networks, Inc. and its licensors and is distributed under a restrictive license. This product, or any portion thereof, may not be used, copied, modified, reverse assembled, reverse compiled, reverse engineered, distributed, or redistributed in any form by any means without the prior written authorization of Dust Networks, Inc. RESTRICTED RIGHTS: Use, duplication, or disclosure by the U.S. Government is subject to restrictions of FAR 52.227-14(g) (2)(6/87) and FAR 52.227-19(6/87), or DFAR 252.227-7015 (b)(6/95) and DFAR 227.7202-3(a), and any and all similar and successor legislation and regulation. Disclaimer This documentation is provided “as is” without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fitness for a particular purpose. This documentation might include technical inaccuracies or other errors. Corrections and improvements might be incorporated in new versions of the documentation. Dust Networks does not assume any liability arising out of the application or use of any products or services and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Dust Networks products are not designed for use in life support appliances, devices, or other systems where malfunction can reasonably be expected to result in significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Dust Networks customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify and hold Dust Networks and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Dust Networks was negligent regarding the design or manufacture of its products. Dust Networks reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products or services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to Dust Network's terms and conditions of sale supplied at the time of order acknowledgment or sale. Dust Networks does not warrant or represent that any license, either express or implied, is granted under any Dust Networks patent right, copyright, mask work right, or other Dust Networks intellectual property right relating to any combination, machine, or process in which Dust Networks products or services are used. Information published by Dust Networks regarding third-party products or services does not constitute a license from Dust Networks to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from Dust Networks under the patents or other intellectual property of Dust Networks. © Dust Networks, Inc. 2006, 2007. All Rights Reserved. Document Status Document Number: 020-0026 rev 1 M2140 / M2040 Datasheet Last Revised: December 7, 2007 Product Status Definition Advanced Information Planned or under development This datasheet contains the design specifications for product development. Dust Networks reserves the right to change specifications in any manner without notice. Preliminary Engineering samples and pre-production prototypes This datasheet contains preliminary data; supplementary data will be published at a later time. Dust Networks reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. The product is not fully qualified at this point. No Identification Noted Full production This datasheet contains the final specifications. Dust Networks reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Obsolete Not in production This datasheet contains specifications for a product that has been discontinued by Dust Networks. The datasheet is printed for reference information only. M2x40 Mote Datasheet Dust Networks™ 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2007:12:07 10:09:59-08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2007:12:07 10:09:59-08:00 Format : application/pdf Creator : gcharles Title : Microsoft Word - 020-00xx , M2140 datasheet_internal.doc Document ID : uuid:57cf671d-a83c-462d-bd11-bf2fc9b960ae Instance ID : uuid:27f01b83-662e-49ed-992f-7a182318519d Page Count : 20 Author : gcharlesEXIF Metadata provided by EXIF.tools