Dynabook UPA3674RF Wireless Presenter User Manual presenter

Toshiba Corporation Wireless Presenter presenter

Manual

User’s ManualWireless PresenterIntroductionThank you for purchasing the Toshiba Wireless Presenter. The Wireless Presenter with Laser Pointer enables you to control your onscreen presentations within a range of 50 feet, making it perfect for large conference rooms. The presenter supports the most common PowerPoint® presentation functions including Page Up, Page Down, and Darken Screen & Resume Screen. It also has a laser pointer to help you focus in on key messages. The small size allows you to control your presentation with ease and enjoy freedom of movement as you present. Just plug and play, no software is required. Package Contents❖Wireless Presenter with receiver unit❖User’s Manual❖Warranty booklet ❖AAA Battery (1) Minimum System Requirements❖USB port❖Windows® Vista™ /XP/2000This is a Class 2 Laser product. Please DO NOT look at or direct the laser beam at anyone’s eye.
Functions and Features:2Functions and Features:Top SideBack Side- Page Up - Auto on/off function- Page Down - Self contained receiver unit - Darken Screen - Low battery warning light- Resume Screen - Up to 50 foot range- Laser Pointer - Compact for travelLaser Button: Laser Pointer On/OffRight Button: Page Down Pause Button: Darken & Resume Screen Left Button: Page Up Reset ButtonBattery CoverReceiver UnitLow power LED (flashes orange when battery is low)
Receiver Unit 3Receiver UnitGetting Started Inserting the BatteryOpen the battery cover and insert 1 AAA battery. Follow the same procedure as outlined above when replacing the battery.Removing the ReceiverTo remove the receiver unit from its compartment, pull up on the small nub on the back of the receiver. The Presenter will power on immediately after removing the receiver unit.USB PlugLED Reset Button
Connecting the Receiver4Connecting the Receiver Insert the USB receiver into an available USB port on your computer. Connection to the presenter is automatic. Switching Channels (if necessary)This is a plug-and-play device. Normally, it is not necessary to set the RF channel. If you should experience interference, please follow the steps below to select a new RF channel: 1.Plug the receiver unit into one of the USB ports on the computer and press and release the reset button.2. Within 10 seconds, press and release the reset button on the back of the presenter. PressPress
Storing the Receiver Unit 5Storing the Receiver Unit Replace the receiver unit into the compartment in the back the presenter. With the small nub pointing up, slide the USB end of the receiver unit into the compartment and press down gently until the receiver clicks into place.The Presenter will power off after putting the receiver into its compartment. TroubleshootingIf the Presenter stops working, please try one of the following:❖ Make sure the presenter is within 50 feet of the receiver. ❖ Press the reset buttons of the receiver and presenter for switching channels.❖ Turn off any wireless devices that are near the presenter’s receiver. ❖ Replace the battery.
Regulatory statements6Regulatory statementsFCC InformationProduct Name: Wireless PresenterModel number: PA3674U-1ETBFCC notice "Declaration of Conformity Information"This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.WARNING: Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate the equipment.
IC Information 7FCC ConditionsThis equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference(2) This device must accept any interference received. Including interference that may cause undesired operation. ContactIC InformationThis device complies with RSS 210 of Industry Canada.Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) thisdevice must accept any interference, includinginterference that may cause undesired operation of thisdevice.L'utilisation de ce dispositif est soumis aux deuxconditions suivantes: (1) il ne doit pas produire debrouillage et (2) l'utilisateur du dispositif doit être prêt àaccepter tout brouillage radioélectrique reçu, même s'ilest susceptible de compromettre son fonctionnement.The term “IC” before the equipment certificationnumber only signifies that the Industry Canada technicalspecifications were met.Address: TOSHIBA America Information Systems, Inc.9740 Irvine BoulevardIrvine, California 92618-1697Telephone: (949) 583-3000
SpecificationsWireless PresenterPresenterReceiver unitButton: Left: Page upRight: Page downTop: Laser PointerBottom: Darken Screen/Resume ScreenDimension (D x W x H): 115 x 30 x 23 mm4.5 x 1.2 x 0.9 inchesWeight: 35g (1.2 ounces)Battery Type: 1.5V, AAA x 1Interface: RF 2.4GHzRF Output Power: 0dbm (1mW)Operation range: Approximately 15 meter (50 feet)Laser Wavelength: 650nmLaser power: 0.6 ~ 0.9 mWPower consumption: Pairing: 3V, 26 mAButtons: 3V, 2 ~ 4 mAStatic: 3V, 24 uALaser: 3V, 24 mAWorking temperature: 5°C(41°F) to 35°C(95°F)Interface: USB, RF 2.4GHz Dimension (D x W x H): 48 x 16 x 9 mm1.9 x 0.6 x 0.4 inchesWeight: 5.8g (0.2 ounces)Working Temperature: 5°C(41°F) to 35°C(95°F)

Navigation menu