Dynabook UPA3844RD Nano receiver User Manual GMAA0015001T

Toshiba Corporation Nano receiver GMAA0015001T

User Manual

Nano Receiver Wireless Optical MouseUser’s ManualEnglish/Español2 Nano Receiver Wireless Optical MouseSafety iconsIndicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.Indicates a potentially hazardous situation which, if not avoided, may result in property damage.Provides important information.This guide contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows:Nano Receiver Wireless Optical Mouse 3Important Safety InstructionsTo protect against risk of fire, bodily injury, electric shock or damage to the equipment:Do not immerse any part of this product in water or other liquid.Do not spray liquid on this product or allow excess liquid to drip inside.Do not use this product if it has sustained any type of damage.Disconnect this product before cleaning.Regulatory ComplianceFCC InformationFCC notice "Declaration of Conformity Information"measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following4 Nano Receiver Wireless Optical MouseConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA, could void the user’s authority to operate the equipment.FCC ConditionsThis equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference.This device must accept any interference received, including interference that may cause undesired operation.ContactAddress ::TOSHIBA America Information Systems, Inc.9740 Irvine BoulevardIrvine, California 92618-1697Telephone (949) 583-3000Nano Receiver Wireless Optical Mouse 5Following Information is Only for EU-Member StatesDisposal of ProductsDisposal of Batteries and/or AccumulatorsPb, Hg, CdThe crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from householdwaste. Integrated batteries and accumulators can be disposed ofwith the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed ofseparately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) definedin the Battery Directive (2006/66/EC), then the chemical Pb, Hg, Cd symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol. By participating in separate collection of batteries, you will helpto assure the proper disposal of products and batteries and thushelp to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product.6 Nano Receiver Wireless Optical MouseCopyright StatementDisclaimerJanuary 2009, Rev1.0TrademarksThis guide is copyrighted by Toshiba Corporation with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein. ©2010 by Toshiba Corporation. All rights reserved.Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. Microsoft, Windows, Windows XP, Windows Vista, and Window 7 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. 7 Nano Receiver Wireless Optical MouseIntroductionThank you for purchasing the Toshiba Nano Receiver Wireless Optical Mouse!Package ContentsCheck to make sure you have all of the following items :User's Manual (this booklet) and a standard limited warranty bookletWireless Optical mouse with Nano receiverTwo AAA batteries Quick TourThe following figures show the components of the top and bottom of the mouseScroll wheelRightLeftBatteryindicator lightbuttonbuttoncoveron/offNanoreceiver8 Nano Receiver Wireless Optical MouseSystem RequirementsMicrosoft® Windows® 2000Windows® XPWindows Vista®Windows 7USB portSetting up the MouseInstalling the Batteries1Remove the battery cover.2Insert the batteries as shown into the battery compartment.3Replace the battery cover.1st2ndAAA batteries9 Nano Receiver Wireless Optical MouseEstablishing a Connection between the Mouse and the Computer1Press down firmly on the Nano receiver until it clicks and partially pops out of the mouse.2Remove the receiver from the mouse. Nano receiver3Plug the Nano receiver into an available USB port on your computer.10 Nano Receiver Wireless Optical MouseIf the mouse is in Sleep mode, click button or moving mouse to wake it up.Status IndicationsThe indicator light on the top of the mouse provides information about the current status of the mouse.TroubleshootingIndicator light status: Indicates:Solid red (2 Seconds) Power on/Ready for connection Problem Solution(s)Mouse does not workIndicator light flashes red Make sure you have installed the mouse correctly. Please see “Setting up the Mouse” on page 8. Make sure the Nano receiver is plugged into an available USB port on your computer. Make sure the mouse has been detected properly by the operating system. Refer to your computer documentation for the correct port configuration. Low battery warning. Replace the batteries as indicated in the section “Setting up the Mouse” on page 8. Replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.Nano Receiver Wireless Optical Mouse 11Specifications*Model number PA3844 // PA3844DButtons Left, Right, Scroll wheelInterface USBPower requirements Operating: 2.7V/10 mA Stand-by: 2.7V/0.6 mA Sleeping: 2.7V/0.3 mADimensions(D x W x H)97 x 58 x 35 mm(3.8 x 2.3 x 1.4 inches)Weight 65 g (2.3 ounces)Wave length 625–646 nm15 inches/sec8 GAcceleration1200/1600 dpi2.4 GHz (2.402–2.480 GHz)0 dBm3000 times/sec VelocityAccelerationOptical sensorResolutionFrequency band(Change DPI- Push Mid key + Right Key 2 seconds)RF output power8 m (open space 10 m)0%–90% (50 ± 2°C) 0–40°C (32–104°F) RF distanceOperating humidityOperating temperature* Specifications are subject to change without further notice.-20–60°C (-4–140°F) Storage temperature12 Bluetooth Wireless Laser MouseFederal Communication Commission Interference StatementReorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Consult the dealer or an experienced radio/TV technician for help.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Low batteryFlashing redLED will flash for 5 seconds when user wake up mouse every time.DPI changePush mid key and right button at the same time for two seconds then DPI will change automatically.2.4GWireless Optical Mouse / PA3844Nano receiver / PA3844D 7 9IndustryCanadastatement:This device complies with RSS-210 of the Industry Canada Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) thisdevice must accept any interference received, includinginterference that may cause undesired operation.IMPORTANT NOTE:Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forthfor an uncontrolled environment. This equipment should beinstalled and operated with minimum distance 20cmbetween theradiator & your body.

Navigation menu