Dynabook UPA3906WL Digital Video Camera User Manual 1 Manual EN Camileo AIR10 20120309
Toshiba Corporation Digital Video Camera 1 Manual EN Camileo AIR10 20120309
Dynabook >
user manual
User’s Manual
CAMILEO AIR10
Introduction
Welcome and thank you for choosing a TOSHIBA product.
For your convenience, your TOSHIBA product is furnished with two
guides:
a) a Quick Start Guide, and
b) this comprehensive PDF User’s Manual.
Contents
Section 1 Getting to Know Your Camcorder ........................................ 6
Overview ................................................................................ 6
Check the Components ........................................................ 6
Safety Instructions ................................................................ 7
System Requirements .......................................................... 7
Mac Compatibility for ArcSoft MediaImpression ............... 7
Front View ............................................................................. 8
Side View ............................................................................... 9
Bottom View .......................................................................... 9
Section 2 Getting Started ..................................................................... 10
Loading the Battery ............................................................ 10
Charge your battery ............................................................ 10
Inserting and Removing an SD Card (Optional) ............... 11
Turning the Camcorder On and Getting Started .............. 12
Turning the Camcorder Off ................................................ 12
Section 3 Record Mode ........................................................................ 13
Button Function .................................................................. 13
LCD Monitor Information .................................................... 14
Video Recording.................................................................. 16
Photo Recording ................................................................. 16
Using Digital Zoom ............................................................. 16
Options for Menu ................................................................ 17
Operations .......................................................................... 17
Video Setting ....................................................................... 18
Photo Setting ....................................................................... 21
Effects .................................................................................. 25
Contents
Section 4 Playback Mode..................................................................... 27
Button Function .................................................................. 27
LCD Monitor Information .................................................... 28
Operations for Playback Mode ......................................... 29
Video Playback .................................................................... 30
Photo Playback ................................................................... 30
Delete File in Playback Mode ............................................. 31
Section 5 Setting Your Camcorder .................................................... 32
Setup Menu .......................................................................... 32
Section 6 WiFi Function ....................................................................... 36
Uploading the File to the Social Web Site ....................... 36
Broadcast live streaming on USTREAM ........................... 40
Section 7 AIR10 Connect Program ..................................................... 42
Advanced Operation on Your Computer - AIR10 Connect ......... 42
Installing [AIR10 Connect] ................................................. 42
Using AIR10 Connect via WiFi Connection (Infrastructure Mode) .... 44
Using AIR10 Connect via USB Connection ...................... 47
Section 8 Viewing Photos and Videos on TV ..................................... 50
Connecting to a High-Definition 16:9(Wide) TV ............... 50
Section 9 Viewing Photos and Videos on PC .................................... 51
Installing Bundled Software ............................................... 51
Transferring Photos or Videos to a Computer ................. 51
5
EN
Contents
Section 10 Specifications ................................................................... 52
Section 11 Troubleshooting ................................................................. 53
Section 12 Other Information .............................................................. 55
TOSHIBA Support ............................................................... 55
Operating Environment Conditions .................................. 55
Regulatory Information ...................................................... 55
Additional Information ........................................................ 58
About the battery pack ....................................................... 58
6
EN
Section 1
Getting to Know Your Camcorder
Overview
The camcorder with 5 Mega Pixel sensor can take H.264 videos. The H.264 technology allows for
extended video recording with less memory. High quality images up to 16 mega-pixels can also be
delivered smoothly. With a color LCD monitor, you can view and examine the videos and photos
easily.
This camcorder also features video recording at HD resolution of 1920x1080. You can also connect
it to an HDTV via an HDMI cable, and easily playback the recorded high-definition videos on the
wide screen HDTV.
Moreover, this compact camcorder equipped with WiFi module and the exclusive uploading
application make it simple and convenient for you to upload the video or photo on the social website
without connecting to a computer. Even better, you can broadcast live streaming of the camcorder
on USTREAM website via WiFi. Your family and friends can watch the live video streaming of the
camcorder on their smart phones, tablets, or computers.
The camcorder can also connect with your computer via WiFi. It can be a wireless webcam for your
on-line video chatting. Through WiFi connecting, you can transfer the videos and photos to your
computer, and monitor live video from your camcorder.
ISO sensitivity and color balance can either be adjusted automatically or changed manually. A 5 ×
digital zoom helps you to control over the videos and photos you take.
The built-in memory allows you to take photos and to record videos without a memory card. The
memory card slot allows users to increase the storage capacity.
Note
Partial memory of the built-in memory is used for the camcorder’s Firmware code.•
Install the bundled ArcSoft MediaImpression application for viewing the videos correctly on the •
computer.
For the WiFi connectivity working correctly, make sure the bundled application-AIR10 Connect •
(for Windows® based systems only) is installed. Make sure the wireless LAN module of your
computer is activated and your camera is in the same wireless network service area.
Please avoid transferring the confidential • files and setting your personal account information on
open networks or in public areas . The data transferred via WiFi could be leaked.
Check the Components
Unpack the package and make sure all standard accessories listed are included:
Note
Please remove the lens protect film on lens before use.
AC-Adaptor
USB Cable HDMI Cable
Camcorder
Lithium-ion
Rechargeable
Battery
Quick Start Guide
CD-ROM
(Software & User’s Manual)
Warranty Leaflet
Cleaning Cloth
*
*preinstalled in camcorder device
Strap Pouch
Tripod
MENU
OK
(Optional)
7
EN
Safety Instructions
Do not drop, puncture or disassemble the camcorder; otherwise the warranty will be voided.1.
Avoid all contact with water, and dry hands before using.2.
Do not expose the camcorder to high temperature or leave it in direct sunlight. Doing so may 3.
damage the camcorder.
Use the camcorder with care. Avoid pressing hard on the camcorder body.4.
For your own safety, avoid using the camcorder when there is a storm or lightning.5.
Do not use batteries of different specifications. Doing so may lead to the potential for serious 6.
damage.
Remove the battery during long periods between usage, as a deteriorated battery may affect the 7.
functionality of the camcorder.
Remove the battery if it shows signs of leaking or distortion.8.
Use only the accessories supplied by the manufacturer.9.
Keep the camcorder out of the reach of infants.10.
Risk of explosion if battery is replaced by an incorrect type.11.
Dispose of used batteries according to the instructions.12.
System Requirements
OS Microsoft Windows XP, Vista, 7
Hardware
Intel /AMD Dual-Core CPU or above
1GB System memory and free
2GB System hard disk space
4x CD-ROM
1x available USB port
16-bit Color Display
WiFi capability
Mac Compatibility for ArcSoft MediaImpression
OS Mac OS 10.5 or above
Hardware
Intel /AMD Dual-Core CPU or above
1GB System memory and free
2GB System hard disk space
DVD-ROM
1x available USB port
Note
The LCD screen is manufactured using extremely high-precision technology. However, some
tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen.
These dots are a normal result of the manufacturing process, and do not affect the recording.
8
EN
Front View
MENU
OK
LCD Screen
[Return/Exit] Button
[Playback] Button
[Tele(Up)] Button
[Thumbnail] Button
[Wide(Down)] Button
[Delete] Button
[Right] Button
[Left] Button
[Menu/OK] Button
[Video] Button
[Photo] Button
9
EN
Side View
Bottom View
Strap Hook
Tripod Socket
HDMI Port
Mini USB 2.0 Port
Speaker
Lens
Power Button
Indicator light
SD card Cover
Battery Cover
[WiFi] Button
[Internet] Button
Light
Microphone
10
EN
Section 2
Getting Started
Loading the Battery
Before using the camcorder, you must load the supplied Lithium-ion
rechargeable battery.
Insert the battery according to the correct polarity marks ( + or -).1.
Close the battery cover firmly.2.
Note
Please remove the insulator on battery connection before use.•
Different battery types and surrounding temperatures may affect the battery •
performance.
Never expose the battery to a heating equipment (e.g., microwave oven) and •
attempt to dispose of a battery by burning or by throwing it into a fire. Heat
can cause the battery to explode and/or release caustic liquid, both which
may possibly cause serious injury.
Turn the power off and stop using the battery if you observe the condition of excessive heat on •
the battery.
Charge your battery
You must use the supplied AC charger or the USB cable. The
camcorder must be turned OFF. A blinking light will indicate active
charging and a solid light indicates that charging is complete.
In AC charging Mode, the full charge time is about 4 hours and
the light will turn itself off automatically after 3~5 minutes when
the charging is completed. (Actual charging time may vary. It
depends on the battery conditions.)
In PC USB charging mode, the full charge time is about 8.5
hours.
Note
Never charge the battery by a method other than as •
instructed. Doing so may cause a fire or explosion possibly
resulting in serious injury.
Use the supplied AC adapter only with the indicated power •
supply voltage.
Use with any other power supply voltage might cause •
electric shock.
Be sure that the power outlet you plug the adapter into is easily accessible. When you need •
to disconnect power from the camcorder, be sure to unplug the power cord from the electrical
outlet.
1
2
REMOVE
11
EN
Inserting and Removing an SD Card (Optional)
The camcorder comes with an internal memory which allows you to store photos and videos. You can
expand the memory capacity by using an optional SD/SDHC/SDXC memory card.
Insert the memory card into the slot. Please refer to the figure on the right 1.
side.
To remove an installed SD card, press the card inwards to release it.2.
When the card pops out, gently remove it from its slot.3.
Recommended memory capacity: 1GB or above.4.
Note
When a memory card is fitted, videos/photos are saved on the card rather than on the built-in •
memory.
Protecting Data on an SD Card: SD Card is read-only when it is locked. No photos or videos •
can be recorded when the SD card is locked. Make sure
the lock is on the writeable position before recording
any media.
Writeable
position
Write-Protected
Position
12
EN
Turning the Camcorder On and Getting Started
To turn on the camcorder: •
Press [Power Button] for one second to turn it on.1.
To record video: • In Record Mode, press [Video Button] to record videos. To stop recording, press it
again.
To take a photo: • In Record Mode, press [Photo Button] to take photo.
To view stored videos and photos: • Press [Playback Button] to switch to the Playback mode.
Turning the Camcorder Off
To turn off the camcorder: •
Press [Power Button] for one second to turn off.2.
13
EN
Section 3
Record Mode
Button Function
[Video] Button:
Press to take video. 1.
To stop recording, press it again.2.
[Photo] Button:
P1. ress to take photo.
[Playback] Button:
Switch between the Record /Playback Mode.1.
[Return/Exit] Button:
Return to the previous screen.1.
Exit.2.
MENU
OK
[Tele(Up)] Button:
Zoom In.1.
Move between the option items.2.
[Wide(Down)] Button:
Zoom Out.1.
Move between the option items.2.
[Left] Button:
Move between the option items.1.
[Right] Button:
Move between the option items.1.
[Menu/OK] Button:
Menu ON.1.
Validate the setting.2.
Power Button:
Press down for one second to turn on or turn off the camcorder.1.
[WiFi] Button:
Press to turn on / off WiFi.1.
[Internet] Button:
Press to upload video/photo to the internet via WiFi.1.
14
EN
LCD Monitor Information
The indicators shown below may display on LCD when videos and photos are recorded:
(1)
Battery: full power
Battery: medium power
Battery: low power
Battery: empty power
DC power mode
(2)
Video Resolution
FULL HD 1080/30
HD 720/60
HD 720/30
VGA 480/30
Photo Resolution
High-16MP
Standard-5MP
Low-3MP
(3)
Digital Light On
Light On
15
EN
(4)
Video Record Mode
Stabilization On/ Off
Photo Record Mode
Self-timer On/ Off
(5) WiFi signal strength
(6)
00:03:12 Remaining recordable time
00:03:12 Recording time
25 The amount of photos that can still be taken at current resolution
321 Number of current photo
(7) Motion Detection (Video Record Mode Only)
(8) Zoom meter:
1×~5× (5× Digital zoom)
Note
Filter: Black&White / Classic / Negative can be previewed immediately without the indicator on •
the LCD screen.
Motion Detect and Zooming functions cannot be used simultaneously.•
16
EN
Video Recording
In Video Record Mode, • press [Video] Button to start recording. When a video is being recorded, a time
indicator will display on the LCD monitor. To stop recording, press the [Video] Button again.
Press the [Playback] Button to view the recorded• videos.
Four resolution settings are available: •
Video Quality
FULL HD 1080/30: 1920x1080p 30
HD 720/60: 1280x720p 60
HD 720/30: 1280x720p 30
VGA 480/30: 640x480p 30
Photo Recording
In Photo Record Mode, • press the [Photo] Button to take photos.
Press the [Playback] Button to• view the photos.
Three resolution settings are available: •
Image Quality
High-16 Mega Pixels: 4608 x 3456
Standard-5 Mega Pixels: 2592 x 1944
Low-3 Mega Pixels: 2048 x 1536
Using Digital Zoom
The digital zoom magnifies images when recording videos or taking photos.•
To zoom in/out, press the 1. [Tele(Up)] / [Wide(Down)] Button.
The digital zoom can be set from 12. × to 5x.
17
EN
Options for Menu
Video Setting Photo Setting Effects Setup* WiFi*
Light•
Resolution•
Stabilization•
Motion Detect•
Continuous •
Play
Light•
Resolution•
Self-Timer•
Face Tracking•
Date Printing•
ISO•
Slideshow•
Scene•
Filter•
White Balance•
Menu Sound•
TV•
Language•
Time Setting•
Format•
Default Setting•
Available •
Networks (List)
PC_Direct•
* Please refer to Section 5 for the detailed information about [Setup].
* Please refer to Section 6 for the detailed information about [WiFi].
Operations
Operation Screen
Press the [Menu/OK] Button in the Record Mode. 1. The
main menu will show on the screen.
The options are Video Setting, Photo Setting, Effects, 2.
Setup, and WiFi.
Use the Direction Button to select the desired option, 3.
and then press the [OK] Button to enter the submenu.
Use the Direction Button4. to select the specific option
you want to adjust and then press the [OK] Button to
validate the setting.
Or press the [Playback] Button/ select the 5. Return icon (
) to exit.
18
EN
Video Setting
Operation Display Screen
Press [Menu/OK] Button in the Record Mode. 1.
The main menu will show on the screen.
Use the Direction Button to select2. the [Video
Setting ] icon and then press the [OK] Button
to enter its submenu.
The Video Setting menu contains 5 options-- 3.
Light, Resolution, Stabilization, Motion Detect,
and Continuous Play --for you to adjust the
camcorder settings.
Light
You can select the mode to brighten the area or to extend the brightness of the objects.
On The light will be turned on and provides light when recording.
Off The light is turned off.
Digital Light Extend the dynamic range for backlight and high contrast sense, so that
the objects will be brighter and clearer.
Operation Display Screen
In the Video Setting menu, select the [Light] 1.
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
19
EN
Resolution
Four resolution settings are available.
FULL HD 1080/30 Record videos at 1920x1080p 30 resolution.
HD 720/60 Record videos at 1280x720p 60 resolution.
HD 720/30 Record videos at 1280x720p 30 resolution.
VGA 480/30 Record videos at 640x480p 30 resolution.
Operation Display Screen
In the Video Setting menu, select the [Resolution] 1.
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
Stabilization
Record with an effect of reducing the camcorder shake to result in more stable video.
Operation Display Screen
In the Video Setting menu, select the 1.
[Stabilization] icon and then press the [OK]
Button to enter its setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3.
Return icon ( ) to exit.
20
EN
Motion Detection
Record video automatically when the camcorder detects a movement.
Operation Display Screen
In the Video Setting menu, select the [Motion 1.
Detect] icon and then press the [OK] Button to
enter its setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3.
Return icon ( ) to exit.
The camcorder will begin recording automatically 4.
if movement is detected. It stops recording when
movement stops.
Continuous Play
This option allows you to playback files continuously.
Operation Display Screen
In the Video Setting menu, select the 1. [Continuous
Play] icon and then press the [OK] Button to
enter its setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3.
Return icon ( ) to exit.
21
EN
Photo Setting
Operation Display Screen
Press [Menu/OK] Button in the Record Mode. 1.
The main menu will show on the screen.
Use the Direction Button to select2. the [Photo
Setting ] icon and then press the [OK] Button
to enter its submenu.
The Photo Setting menu contains 7 options-- 3.
Light, Resolution, Self-Timer, Face Tracking,
Date Printing, ISO, and Slideshow--for you to
adjust the camcorder settings.
Light
You can select the mode to brighten the area or to extend the brightness of the objects.
On The light will be turned on and provides light when recording.
Off The light is turned off.
Digital Light Extend the dynamic range for backlight and high contrast sense, so that
the objects will be brighter and clearer.
Operation Display Screen
In the Photo Setting menu, select the [Light] 1.
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
22
EN
Resolution
Three resolution settings are available.
High-16M Shoot photo at 4608 x 3456, 16 Mega Pixels quality.
Standard-5M Shoot photo at 2592 x 1944, 5 Mega Pixels quality.
Low-3M Shoot photo at 2048 x 1536, 3 Mega Pixels quality.
Operation Display Screen
In the Photo Setting menu, select the [Resolution] 1.
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
Self-Timer
The self-timer allows you to take photos with a ten-second time delay. The Indicator light on the rear of
the camcorder will also blink. The speed of blinking will increase just before the photo is taken.
Operation Display Screen
In the Photo Setting menu, select the [Self-1.
Timer] icon and then press the [OK] Button to
enter its setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
23
EN
Face Tracking
The camcorder detects and focuses on face(s) automatically. This function works in Photo mode to
capture portraits in backlit conditions.
Operation Display Screen
In the Photo Setting menu, select the [Face 1.
Tracking] icon and then press the [OK] Button to
enter its setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
In Record Mode, aim the camcorder at the 4.
face(s). The face frame(s) will appear around
the face.
Date Printing
Imprint the date and time on the photo.
Operation Display Screen
In the Photo Setting menu, select the [Date 1.
Printing] icon and then press the [OK] Button to
enter its setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
As the function is activated, the date will 4.
appear on the corner of the photo.
24
EN
ISO
The camcorder adjusts the ISO sensitivity of its images automatically. Two manual ISO sensitivity
settings are available. (800/1600). Use the higher setting to take a photo in the dark or in a poorly lit
location, or for an subject moving at a high rate of speed.
Auto Set the ISO sensitivity automatically.
800 ISO 800
1600 ISO 1600
Operation Display Screen
In the Photo Setting menu, select the [ISO] 1.
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
Note
The image may become grainy with a higher ISO setting.
Slideshow
Photos can be viewed one after another in a slideshow in a chosen interval of time.
2 Seconds Display one photo every 2 seconds
5 Seconds Display one photo every 5 seconds
10 Seconds Display one photo every 10 seconds
OFF Disable Slideshow
Operation Display Screen
In the Photo Setting menu, select the [Slideshow] 1.
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
25
EN
Effects
Operation Display Screen
Press [Menu/OK] Button in the Record Mode. 1.
The main menu will show on the screen.
Use the Direction Button to select2. the [ Effects
] icon and then press the [OK] Button to
enter its submenu.
The Effects menu contains 3 options-- Scene, 3.
Filter, and White Balance --for you to adjust the
camcorder settings.
Scene
You can select the mode according to the scene condition.
Auto Automatic adjustment
Skin Shoot with an effect that makes skin tones more natural.
Night Use Night Mode for night scenes or low light conditions.
Backlight You can take shots when the bright light is behind the subject.
Operation Display Screen
In the Effects menu, select the [Scene] icon 1. and
then press the [OK] Button to enter its setting
menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
Note
To avoid blurry photos, place the camcorder on a flat, steady surface, or use a tripod when taking
shots in the Night Mode.
26
EN
Filter
You can select a special filter effect for videos and photos.
Auto Shoot without any special effect on the image.
Black & White The image is converted to black-and-white.
Classic The image is converted to a sepia look.
Negative The image is converted as the negative of the normal.
Operation Display Screen
In the Effects menu, select the [Filter] icon 1. and
then press the [OK] Button to enter its setting
menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
White Balance
The camcorder adjusts the color balance of images automatically. Three manual white balance settings
are available:
Auto The camcorder automatically adjusts white balance.
Daylight Under outdoor condition.
Fluorescent Under fluorescent light condition.
Tungsten Under tungsten light condition.
Operation Display Screen
In the Effects menu, select the [1. White Balance]
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
27
EN
Section 4
Playback Mode
Button Function
The Buttons have the following functions in Playback Mode.
[Video] Button:
In Playback Mode, press to switch to the Video Playback Mode. 1.
[Photo] Button:
In Playback Mode, press to switch to the Photo Playback Mode. 1.
[Playback] Button:
Switch between the Record /Playback Mode.1.
[Return/Exit] Button:
Return to the previous screen.1.
Exit.2.
MENU
OK
[Tele(Up)] Button:
Go to the video/photo thumbnail screen.1.
When playing video, press to increase volume.2.
[Wide(Down)] Button:
Go to the delete screen.1.
When playing video, press to decrease volume.2.
[Left] Button:
Go to the previous video/photo.1.
[Right] Button:
Go to the next video/ photo.1.
[Menu/OK] Button:
In Video Playback mode, press to play/pause the video.1.
Validate the setting.2.
[WiFi] Button:
Press to turn on / off WiFi.1.
[Internet] Button:
Press to upload video/photo to the internet via WiFi.1.
28
EN
LCD Monitor Information
Indicators on the LCD screen while in Playback Mode:
Video Playback Mode Photo Playback Mode
(1)
Battery: full power
Battery: medium power
Battery: low power
Battery: empty power
DC power mode
(2)
Video Resolution
FULL HD 1080/30
HD 720/60
HD 720/30
VGA 480/30
Photo Resolution
High-16MP
Standard-5MP
Low-3MP
(3) WiFi signal strength
29
EN
(4)
00:03:12 Playback time counter
12 Number of current photo
25 Total number of photos
(5) Volume
(6) 22
/Current number/ Total number of videos
Operations for Playback Mode
The Playback Mode is for viewing and managing videos and photos on the built-in memory or on an SD
Card.
Operation Display Screen
In Video Record Mode, press the [ Playback ] 1.
Button to switch to the Video Playback Mode.
In Photo Record Mode, press the [ Playback ]1.
Button to switch to the Photo Playback Mode.
Press the 2. [ Tele (Up) ] Button to go to the video/
photo thumbnail screen of videos and photos.
In 3. the thumbnail screen of videos and photos,
select the file and then press the [OK] Button to
go the file.
Or press the [Playback] Button 4. to exit.
30
EN
Video Playback
Operation Display Screen
In the Video Playback Mode, press 1. the [OK]
Button to play or pause the video.
When the video is paused, press the [Down] 2.
Button to go to its delete screen.
Use the [Right/Left] Button to go to the next/ 3.
previous video.
While playing video, 4. press the [Right/Left]
Button to fast forward/rewind, then press the
[OK] Button to stop.
Use the 5. [Tele(Up)/Wide(Down)] Button to adjust
the volume.
Press the [Internet] Button to select the current 6.
video to upload to Internet.
Photo Playback
Operation Display Screen
In the 1. Photo Playback Mode, use the [Right/
Left] Button to go to the next/ previous photo.
Press t2. he [OK] Button to pause the slideshow.
Press the [Internet] Button to select the current 3.
photo to upload to Internet.
31
EN
Delete File in Playback Mode
Operation Display Screen
In the Playback Mode, 1. press the [Down] Button
to go to the delete screen.
Select 2. to delete the current file and then
select to delete it. Select to cancel
and exit.
Select 3. to delete all files and select to
delete them. Select to cancel and exit
Or 4. press the [Return/Exit] Button to cancel the
operation and exit.
Note
Videos and Photos on a written-protected memory card cannot be deleted.•
32
EN
Section 5
Setting Your Camcorder
Setup Menu
Operation Display Screen
Press [Menu/OK] Button in the Record Mode. 1.
The main menu will show on the screen.
Use the Direction Button to select2. the [Setup
] icon and then press the [OK] Button to
enter its submenu.
The Setup menu contains 7 options 3. for
configuring your camcorder setup. They are
Menu Sound (operation sound), TV, Language,
Time Setting, Format, Default Setting, and
Information (shows the information of this
camcorder).
Menu Sound
Enable or disable the keypad tone and the operation sound.
Operation Display Screen
In the 1. Setup menu, select the [Menu Sound]
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
33
EN
TV
Ensure that the appropriate TV standard of your area is selected – either NTSC or PAL. Wrong TV
system setting may cause image flickers.
NTSC(60Hz) USA, Canada, Japan, South Korea and Taiwan, etc.
PAL(50Hz) UK, Europe, China, Australia, Singapore and Hong Kong, etc.
Operation Display Screen
In the 1. Setup menu, select the [TV] icon and then
press the [OK] Button to enter its setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
Language
Use this option to select the language of the user interface.
Operation Display Screen
In the 1. Setup menu, select the [Language] icon
and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
34
EN
Time Setting
Operation Display Screen
In the 1. Setup menu, select the [Time Setting]
icon and then press the [OK] Button to enter its
setting menu.
Use the [Right/Left] Button to 2. move between
Day, Month, Year, Hour and Minute.
Use the [3. Up/Down] Button to adjust the numeric
value.
Press the [OK] Button / 4. select the [Confirm] icon
( ) to validate the setting.
Or press the [Playback] Button/ select the 5. Return
icon ( ) to exit.
Format
Use this option to erase all data in tthe built-in memory or the SD card.
Yes Format the built-in memory ( When there is no SD card in the camcorder ) / SD card
(When there is an SD card in the camcorder).
No Do not format the built-in memory ( When there is no SD card in the camcorder ) /
SD card (When there is an SD card in the camcorder).
Operation Display Screen
In the 1. Setup menu, select the [Format] icon and
then press the [OK] Button to enter its setting
menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
Note
All the data will be erased if the SD card is formatted. Make sure all the data are copied to your
PC before formatting the SD card.
35
EN
Default Setting
Use this option to restore the default factory setting.
Yes Restore the default factory setting.
No Do not restore the default factory setting.
Operation Display Screen
In the 1. Setup menu, select the [Default Setting]
icon and then press the [OK] Button to enter its
setting menu.
Select the desired option 2. and then press the
[OK] Button to validate the setting.
Or press the [Playback] Button/ select the 3. Return
icon ( ) to exit.
Note
The WiFi setting, such as profile of access points and account information of the websites will be
erased.
The following table indicates the camcorder’s default settings
Setting Default Factory Setting
Resolution Full HD 1080/30 for Video
Standard- 5M for Photo
Light Off
Stabilization On
Motion Detection Off
Continuous Play Off
Self-Timer Off
Face Tracking Off
Date Printing Off
ISO Auto
Slideshow Off
Scene Auto
Filter Auto
White Balance Auto
Menu Sound On
TV Depends on shipping area
Language Depends on shipping area
Volume Level 3
36
EN
Section 6
WiFi Function
WiFi Function
The camcorder equipped with WiFi module allows you to:
Upload the file to the social websites.•
Broadcast live streaming on USTREAM website.•
With [AIR10 Connect] application (for Windows® based systems only) on your computer, you can:
Download the files from the camcorder to your computer. •
Watch live streaming video from the camcorder on your computer.•
Use the camcorder as a wireless webcam for online video chatting.•
Configure your account information of the social web sites.•
Uploading the File to the Social Web Site
Follow the step to connect to an available AP successfully.
Operation Screen
Press the [WiFi] Button 1. . The camcorder scans
the available access point (AP) device and connects
to it automatically. (You can also select the available
access point (Network) manually by selecting [WiFi] in
the Menu Mode. )
If the 2. available AP(Network) requires the password or
its profile is not saved yet, the AP list shows on the
screen.
Icon Description
Existing Profile-the profile of the AP is saved
on the camcorder.
Secured network-requires the password to
access the AP.
Signal strength
Down cursor-indicates more than four access
points are available on the next page, press
the [Down] Button to go to the next page.
Select the AP3. (Network) and then press the [OK]
Button.
37
EN
If the selected AP requires the password 4. authentication,
you will enter its setting screen.
Use the Direction Button to select the text and press 5.
the [OK] Button to confirm it.
Field Description
Capital letters
Lower case letters
Numbers, symbols
When the setting is done, select 7. the [Confirm] icon (
) to validate the password and connect to the
AP.
Or press the [Playback] Button/ select the 8. Return icon
( ) to exit.
The screen shown [CONNECTION OK] indicates the 9.
connection is established.
When the connection is 10. established, the signal strength
will show on the top of the screen.
The screen shown [CONNECTION FAILED] indicates 11.
the camcorder does not connect to the AP.
Note
This camcorder only supports the AP(SSID) named in English/number/symbols (ASCII •
characters).
The possible reasons for “CONNECTION FAILED” could be (1) wrong password ; (2) you •
are not in the wireless network area of the AP. (3) the camcorder does not support the type
of encryption used on the AP. This model only supports WEP/WPA/WPA2 personal type of
encryption, but not up to enterprise level (4)your network requires PPPoE account/password
information.
You can only enter text in English, regardless of the OSD language.•
38
EN
After the connection to AP is established, follow the steps to upload the video/photo to the social
websites.
Operation Screen
Press the [Internet] Button 1. . The camcorder
automatically connects to the network.
Some network require the authentication from the 2.
network service provider (NSP). Please follow the
instruction on the screen--- pressing the [OK] Button/
[Return] button; or contact with the network service
provider.
39
EN
The screen shown [CONNECTION OK] indicates the 3.
connection is established.
The screen shown [CONNECTION FAILED] indicates 4.
the camcorder does not connect to the network.
Once the 5. connection to the network has been
established, The camcorder automatically connects
to the network and launches the built-in uploading
application.
Select the website you want to upload.6. *
*Before you upload the file to the social
website, you have to set up your social website
account information on the [AIR10 Connect ]
application and save to your camcorder. (please
refer to next section for the detail.)
Select the file you want to upload, and then press 7. the
[OK] Button to confirm it.
During uploading, the status bar shown as the 8.
screenshot on the right side.
To cancel uploading, press the [9. Playback] Button/
[Return] Button to go back to the previous screen.
40
EN
Broadcast live streaming on USTREAM
Follow the steps 1-6 on the pervious pages. 1.
Select USTREAM on the website list screen.2.
To cancel streaming, press the [3. Playback] Button/
[Return] Button to terminate streaming.
The video streaming will be broadcasted on the 4.
USTREAM website.
People who has your account / channel name, they 5.
can visit USTREAM website and watch the live
video streaming from you camcorder through their
various devices, such as computers, tablets, or smart
phones.
(The steps to watch live streaming on USTREAM, please
refer to the instruction on the USTREAM website.)
Note
If you do not have a account, please sign up on the website first.•
Make sure you create the channel on USTREAM website for your broadcast. For detailed •
setup procedure, please refer to USTREAM website.
Some AP routers do not allow you to connect to the network (e.g. firewall).•
You may be charged by the network service provider.•
Please stay away from any electronic equipment since the radio frequency signals may interfere •
connecting.
The camcorder cannot connect to the network while it is connected to an HDTV via the cable, •
or vice versa.
It may take time to scan and connect to the AP/network or to upload. The upload speed is •
affected by the Internet connection speed or other factors.
Please be sure the battery is fully charged before connecting to the network. It may take time •
to upload.
41
EN
Once the Default Setting is activated, • the profile of access points and the account information
of the websites will be erased.
The social website update is the subject to change without notice. (e.g. password validation,•
create a channel) Please visit the website first to update your account setting.•
Some social websites may not be allowed to access in certain regions or networks.•
Configure through the [AIR10 Connect] application on your computer may required to enable •
WiFi uploading / streaming features (e.g. Select the channel for broadcasting on YouTube/
USTREAM).
Please avoid transferring the confidential files and setting your personal account information on •
the open networks or in public areas . The data transferred via WiFi could be leaked.
To prevent the camcorder from turning off accidentally, please be sure the battery is fully •
charged.
42
EN
Section 7
AIR10 Connect Program
Advanced Operation on Your Computer - AIR10 Connect
The camcorder can connect to your computer via WiFi or USB. Once you launch the [AIR10 Connect]
application (for Windows® based systems only) on your computer, it will search for your camcorder and
connect to it. Then, you can operate more functions on your computer.
There are several functions as below:
Transfer the files from the camcorder. ( • )
Watch live streaming video from the • camcorder on your computer. ( )
Use the camcorder as a wireless webcam for online video chatting. • ( )
Configure your account information of the social web sites and save to the camcorder.• ( )
Synchronize the WiFi profile with your camcorder and set up a security password for opening [AIR10 •
Connect] application via Wi-Fi connection.( )
Installing [AIR10 Connect]
To connect to the camcorder and launch [AIR10 Connect] application via WiFi correctly, you have
to install this program firstly. It is a perfect platform for you to watch live streaming video from your
camcorder and use the camcorder as a webcam for your online video chatting. The application also
facility the configuration of the WiFi profiles and your social website account information.
Follow the steps below to install the [AIR10 Connect] on the computer. The program pack is bundled in
the
camera and on the CD as backup.
1. Connect the camcorder to your computer by using the supplied USB cable.
Via CD
Insert the 1. bundled CD into your computer’s CD-ROM drive. The autorun screen appears.
Click on [ Install AIR10 Connect] to install the application.2.
43
EN
After making a USB connection, the program installs automatically, or the AutoPlay window appears. 3.
(It may be different based on OS recognition. If the AutoPlay window does not appear. Please click
[My Computer]-->[AIR10 Connect] to execute the installation of this program.
Follow the on-screen instructions to complete the installation.4.
The shortcut of AIR10 Connect shows on the desktop. (Or you can find the application at [Start]-->[All 5.
Program].)
The main screen appears automatically on the desktop.6.
When the installation is completed, you can unplug the USB cable. 7.
Note
If ArcSoft MediaImpression is not installed, AIR10 Connect program will install the H.264 Codec •
(ffdshow-a free software under GPL license) for viewing the videos correctly.
To work correctly on the video chatting, you have to log out /quit from the Instant Message (IM) •
application before the installation.
During the installation, a warning message may pop out. Please click on [Continue Anyway]/ •
[Yes] to go on the installation.
AIR10 Connect is for Windows® based systems only.•
44
EN
Using AIR10 Connect via WiFi Connection (Infrastructure Mode)
Operation Screen
On your camcorder:
Press [Menu/OK] Button in the Record Mode. 1. The
main menu will show on the screen.
Use the Direction Button to select2. the [ WiFi ] icon
and then press the [OK] Button. The screen shows the
available AP list.
Select the available access point (Network) 3.
and connect to it. (Refer to page 36 for detailed
instruction.)
On your computer:
(Make sure your computer is on the same wireless
network.)
Double click on the AIR10 Connect shortcut on the 4.
desktop. (make sure the [AIR10 Connect] application is
installed in your computer.)
The camcorder connects to your computer and the [AIR10 5.
Connect] main screen displays on your computer.*
*One task window may pop out to ask you to select
your camcorder when there are two or more WiFi
devices in the same wireless network range.
45
EN
The AIR10 Connect application serves 3 options while connecting via WiFi:
Function Description Screen
TRANSFER You can remote access the videos and
photos stored in your camcorder.
You can transfer or delete the files on
your computer.
LIVE VIDEO Watch live streaming from your
camcorder on your computer.
The video resolution can be selected.
(On the camcorder)
46
EN
VIDEO CHAT Use your camcorder as a wireless
webcam for online video chatting
(You have to select this device as your
webcam on the camera/audio setting
first.)*
(On the camcorder)
(*You have to select [Virtual Camera] as
your webcam and [Virtual Audio Device]
as your microphone for the online video
chatting.)
Note
ACCOUNT SETUP and WiFi SETUP are not available during WiFi connecting.•
For the WiFi connectivity working correctly, make sure the bundled AIR10 Connect (for •
Windows® based systems only) is installed and the wireless LAN module of your computer
is activated.
Make sure your computer connects with your access point (AP) correctly and your camcorder •
is in the same range of the WLAN.
For the much more stable video streaming when using LIVE VIDEO or VIDEO CHAT, please •
make sure the WiFi signal strength shows 2 bars () or above on the camcorder.
To boost the WiFi signal strength, you can move the camcorder closer to your computer.•
If the camcorder is far from your computer or the AP device, it may take longer to connect to •
the network. ( The signal and the radio frequency may be interfered.)
47
EN
Using AIR10 Connect via USB Connection
Connect the camcorder to your computer by using the supplied USB cable.1.
After making a USB connection, the main screen will appear. Or please click [AIR10 Connect] shortcut 2.
on the desktop to execute the application. Or you can find it at [Start]-->[All Program].
The AIR10 Connect application serves 3 options while connecting via USB:
Function Description Screen
TRANSFER You can access the videos and photos
stored in your camcorder and upload
files to the social websites.
Upload
Select the videos/photos on the 1.
thumbnail screen.
Click on [Upload].2.
The website options appears.3.
Select the website and check the 4.
Username/Email and password of
the specific social website in the
fields.
Click on [OK] to upload.5.
48
EN
ACCOUNT
SETUP Set up your social website account
information and save to your
camcorder.*
Select the social website tab that 1.
you want to configure.
Enter your Username/Email and 2.
password of the specific social
website in the fields. (If you ever
create more than one account
informations on the same computer,
you can select the account in the
drop-down list. )
Click on 3. [Save] to save this account
information to your camcorder.
You can delete the information by 4.
clicking on [Remove].
*For USTREAM setup, you may
choose the channel.
*You MUST set up your account
information of the social websites
on the computer by this [AIR10
Connect] application and save to
the camcorder before uploading.
49
EN
WiFi SETUP WiFi Profile
Synchronize the WiFi profile of your
computer with your camcorder.
Click on 1. [Add to Camera] to add
the WiFi profile of your computer to
your camcorder.*
Click on [Up]/[Down]/[Remove] to 2.
sort the priority of the WiFi profiles
on your camcorder.
*Make sure your computer is
equipped with a wireless LAN
adapter and connects with your
access point (AP) correctly;
otherwise the SSID field will be
blank.
Camcorder Setting
Create a name for your camcorder or
a security password for opening the
[WiVideo] application.
Create a password in the 1.
[Password] field and type again in
the [Confirm] field.
Check on [Enable Security] to 2.
enable it. Then, you will be asked
to type the password before
accessing [AIR10 Connect]
application via WiFi connection next
time.
Note
LIVE VIDEO and VIDEO CHAT are not available during USB connecting.•
Some • social websites may not be allowed to access in certain regions or networks.
Your computer must have internet access to upload files to the website.•
If you do not have a account, please sign up on the website first.•
The social website update is the subject to change without notice. (e.g. password validation, •
create a channel) Please visit the website first to update your account setting.
50
EN
Section 8
Viewing Photos and Videos on TV
Connecting to a High-Definition 16:9(Wide) TV
Connect the HDMI cable to your camcorder’s HDMI Out port.1.
Connect the other end of the cable to a television.2.
Set the video input source of your TV to “ HDMI.”3.
The steps for viewing stored videos and photos on an HDTV are exactly the same as for viewing them 4.
on the LCD monitor.
(16:9)
Note
The camcorder cannot run menu setting and thumbnail screen when it is connected to an
HDTV.
51
EN
Section 9
Viewing Photos and Videos on PC
Installing Bundled Software
Concerning the application software, the following software are bundled in the supplied CD.
The CD-ROM supplied with this camcorder contains 3 pieces of software.
ArcSoft MediaImpression • is a user-friendly application that helps you managing your media,
playback the video, and uploading your files to the web sites easily.
AIR10 Connect • iis our exclusive PC application that provides a simple and friendly platform to
manage the files in the camcorder, and control the interaction with your camcorder via either WiFi or
USB connection. (Refer to Section 7)
Adobe Reader• is a popular program that you need to have installed to read the User’s Manual. Many
computer users will find they already have this software installed on their computer.
To install the bundled software:
Insert the 1. bundled CD into your computer’s CD-ROM drive. The autorun screen appears.
Choose the application you want to install.2.
Follow the on-screen instructions to complete the installation.3.
Note
Detailed information can be found in the online help of ArcSoft MediaImpression.•
Transferring Photos or Videos to a Computer
You can transfer photos or videos stored on your camcorder to a computer and send them in e-mails to
friends or post them on the web sites.
Connect the computer and camcorder with the supplied mini USB 2.0 cable. .1.
To access photos and videos on your SD card: on your computer at “My Computer\ Removable 2.
Disk\DCIM\100MEDIA.”
To access photos and videos in the camcorder’s internal memory: on your computer at “My Computer\3.
DV\DCIM\100MEDIA”
Under the folder, you can view, delete, move, or copy any video/photo you want.4.
52
EN
Section 10
Specifications
Specification
Image sensor 5 Mega pixel CMOS sensor
Operation modes Video record, Photo record, Video/Photo upload via WiFi, Live streaming
via WiFi, Wireless Webcam
Lens Fixed Focus (F 2.5)
Focus range HD 720/60 & HD 720/30: 75 cm (29.5 inches) ~ infinity
Photo & FULL HD 1080/30:110 cm (43.3 inches) ~ infinity
Zoom 1×~5× (5× Digital zoom)
Shutter Electronic
LCD monitor 5.08 cm (2.0 inches) LCD
Storage media Built-in 128MB memory (partial memory is used for firmware code);
SD/SDHC/SDXC card slot support (up to 64GB)
Image resolution HIGH – 16MP :16 Mega Pixels 4608 x 3456 (Interpolated)
STANDARD – 5MP : 5 Mega Pixels 2592x1944
LOW – 3MP : 3 Mega Pixels 2048x1536
Video resolution FULL HD 1080/30 : 1920X1080(30fps)
HD 720/60 : 1280X720(60fps)
HD 720/30 : 1280X720(30fps)
VGA 480/30 : 640X480(30fps)
White balance Auto/Manual (Daylight, Fluorescent, Tungsten)
ISO Auto/800/1600
Self-timer 10 seconds delay
Light Light ON/Light OFF/ Digital Light ON
File format Photo: JPG
Video: MP4 (H.264)
Image play Single image/Slideshow
PC interface Mini USB 2.0 port
TV out HDMI
WiFi 802.11 a/b/g Wi-Fi certified
Battery Lithium-ion rechargeable battery
Dimension 56mm (W) × 108mm (H) × 18mm (D) (2.2(W) × 4.25 (H) × 0.71 (D) inches)
Weight 83 g ( without battery)
53
EN
Section 11
Troubleshooting
Troubleshooting
If the camcorder fails to function as expected, check the list of the common problems below.
Problem/Situation Remediation/Solution
Cannot turn on the
camcorder. The power turns
off suddenly.
Power is off. Press the [Power Button] to turn on.•
Battery pack is weak or dead. Recharge the battery pack.•
The files on the memory
card do not display smoothly
when the LCD shows the “!”
marking.
The “!” means the SD card is low speed or contains corrupted •
files. To solve this, format SD card using the camcorder instead
of a computer. (Please refer to the detailed Format instruction in
Section 5).
The card has some problems and can not be recognized. Change •
the card with another one.
Or please change the SD/SDHC/SDXC card to a high speed •
one.
Cannot take video/photo. Memory is full. Delete some unnecessary videos/photos or insert •
a new SD card.
Power is off. Press the [Power Button] to turn on.•
How do I charge battery? You must use the supplied AC charger or the USB cable.•
The camcorder must be turned OFF.•
A blinking light will indicate active charging and a solid light •
indicates that charging is complete.
In AC charging Mode, • the full charge time is about 4 hours and the
light will turn itself off automatically after 3~5 minutes when the
charging is completed. (Actual charging time may vary. It depends
on the battery conditions.)
The camcorder is freezes. Try to turn off the camcorder and remove the battery. Then, insert •
the battery and turn on the camcorder again.
The date imprinted on the
photo is incorrect
Set the date and time in SETUP menu.•
Why do some of my indoor
photos look blurry and
dark?
Poor lighting. Take photo in better lighting.•
The camcorder extends photo exposure time under low light/ indoor •
condition. Keep the camcorder (and the target subject) steady for
several seconds when taking photos.
Place the camcorder on a flat and steady surface, or use a tripod •
when take photo.
The color of the video/photo
is not natural.
Select the proper white balance option to match the light source.•
54
EN
After connecting the USB
cable to the computer:
[DV] indicates the internal memory of the camcorder.•
[Removable Disk] indicates the external memory (SD/SDHC/•
SDXC card installed in the camcorder).
[AIR10 Connect] indicates the bundled program. If you want to •
install this program, please double-click on it to start installation
automatically.
The LCD shows
[CONNECTION FAILED]
after pressing Internet/ WiFi
Button.
The password configuration does not match to the AP you want •
to connect.
The AP router or the computer is not turned on. Turn the AP router •
or your computer on.
The camcorder is not in the wireless network service area or weak •
network signal. Please make sure the AP router is able to access
the Internet.
The camcorder does not support the type of encryption used on •
the AP. This model only supports WEP/WPA/WPA2 personal type
of encryption, but not up to enterprise level.
Your network requires PPPoE account/password information.•
Some AP routers do not allow you to connect to the network (e.g. •
firewall).
The AIR10 Connect
application cannot be
installed.
Check the computer system is compatible.•
55
EN
Section 12
Other Information
TOSHIBA Support
Need help?
For the latest driver updates, user’s manuals & FAQ’s please have a look at the
TOSHIBA options & services support page:
computers.toshiba.eu/options-support
Please see
computers.toshiba.eu/options-warranty
for the TOSHIBA hotline numbers.
Operating Environment Conditions
Operating temperature: -10 to 40° C
Operating humidity: 20 to 85 %RH
(no condensation allowed)
Regulatory Information
FCC Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver is •
connected.
56
EN
Consult the dealer or an experienced radio/TV technician for help.•
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter.
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
Federal Communication Commission (FCC) Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE
C95.1-1999 and had been tested in accordance with the measurement methods and procedures
specified in OET Bulletin 65 Supplement C.
Working Environment
The Electromagnetic Compliance (EMC) of this product has been verified typically for this product
category for a so called Residential, Commercial & Light Industry Environment. Any other working
environment has not been verified by Toshiba and the use of this product in these working environments
is maybe restricted or cannot be recommended. Possible consequences of the use of this product in non
verified working environments can be: Disturbances of other products or of this product in the nearby
surrounding area with temporarily malfunction or data loss/corruption as result. Example of non verified
working environments and related advices:
Industrial environment (e.g. where a 3-phase 380V mains is being used mainly): Danger of disturbances
of this product due to possible strong electromagnetic fields especially near to big machinery or power
units.
Medical environment: The compliance to the Medical Product Directive has not been verified by Toshiba,
therefore this product cannot be used as a medical product without further verification. The use in usual
office environments e.g. in hospitals should be no problem if there is no restriction by the responsible
administration.
Automotive environment: Please search the owner instructions of the related vehicle for advices
regarding the use of this product (category).
Aviation environment: Please follow the instructions of the flight personnel regarding restrictions of
use.
57
EN
Additional environments not related to EMC
Outdoor use: As a typical home/office equipment this product has no special resistance against ingress
of moisture and is not strong shock proofed.
Explosive atmosphere: The use of this product in such special working environment (Ex) is not
allowed.
REACH
Following information is only valid for EU-member States:
REACH - Compliance Statement
The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization
and Restriction of Chemicals), entered into force on 1 June 2007.
Toshiba will meet all REACH requirements and is committed to provide our customers with information
about the chemical substances in our products according to REACH regulation.
Please consult the following website www.toshiba-europe.com/computers/info/reach for information
about the presence in our articles of substances included on the candidate list according to article
59(1) of Regulation (EC) No 1907/2006 („REACH“) in a concentration above 0.1 % weight by weight.
Following information is only valid for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected
and disposed of separately from household waste. Integrated batteries and
accumulators can be disposed of with the product. They will be separated at the
recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005. By participating
in separate collection of products and batteries, you will help to assure the proper disposal of products
and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country,
please visit our website (http://eu.computers.toshiba- europe.com) or contact your local city office or the
shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators
must be collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC),
then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the
crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products
and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country,
58
EN
please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the
shop where you purchased the product.
Additional Information
© 2011 TOSHIBA Europe GmbH. All rights reserved.
TOSHIBA reserves the right to make technical changes. TOSHIBA assumes no liability for damages
incurred directly or indirectly from errors, omissions or discrepancies between this product and the
documentation.
About the battery pack
Use only batteries recommended by TOSHIBA as replacements. The battery pack is lithium ion •
batteries, which can explode if not replaced, used, handled or disposed of properly. Dispose of the
battery as required by local ordinances or regulations.
Charge the battery pack only in an ambient temperature between 5 and 35 degrees • Celsius. Otherwise,
the electrolyte solution might leak, battery pack performance might deteriorate and the battery life
might be shortened.
Never install or remove the battery pack without first turning off the power and • disconnecting the AC
adaptor.
Use only the product connected to an AC power source or optional TOSHIBA Battery • charger to
charge the battery pack. Never attempt to charge the battery pack with any other charger.
59
EN
73 EN
0970AA212L-A01S
For more information, please visit:
www.toshiba-multimedia.com
AIR10_UM_V01_0411