E F Johnson 2427240 UHF FM Handheld Transceiver Held-to-face User Manual Section2

Download:
Mirror Download [FCC.gov]
Document ID	139142
Application ID	9wH+c0tKz9CJLVjeBSClEQ==
Document Description	Revised Page of Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.74kB (184197 bits)
Date Submitted	2001-03-06 00:00:00
Date Available	2001-04-24 00:00:00
Creation Date	2001-03-06 09:05:54
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-03-06 09:05:54
Document Title	Section2.fm
Document Creator	AdobePS5.dll Version 5.1.2

OPERATION
Phone
Group
System
Scan List
Encryption
Dial
Mode
BUSY
Low
Power Scan Call
O L
UID
8-Character
Not
Alphanumeric
Used
Display
Conv Ch
Busy
Low
Battery
Group Scan
List
Option
Select Monitor
Priority
P2
Tx
UID/Aux
Group
Transmitter
Keyed
Keypad
Lock
Figure 2-2 Display
2.2 CONTROLS AND DISPLAY
Option
PTT
Switch 2 Switch
2.2.1 TOP PANEL CONTROLS
2.2.2 SIDE CONTROLS
NOTE: The top panel controls are shown in
Figure 2-1.
Option Switch 2 - This switch can
be programmed to control a
specific function (see Section
2.5.1).
On-Off Volume - Turning this knob clockwise turns
power on and sets the volume level. Turning it counterclockwise to the detent turns power off. Power is on
when information appears in the display. Refer to
Section 2.3.3 for more information on setting volume.
PTT (Push-To-Talk) - This switch
keys the transmitter so that a
message can be transmitted. The
“Tx” icon is displayed when the
transmitter is keyed.
Option Switch 1 - This switch can be programmed to
control a specific function (see Section 2.5.1).
Option Switch 3 - This switch can
be programmed to control a
specific function (see Section
2.5.1).
Option
Switch 3
Antenna Jack - Connection point for the antenna.
2.2.3 DISPLAY
Accessory Connector - When the protective cover is
removed, this connector can be used to access PTT,
speaker, and microphone lines for transceiver service
testing. It is also the connection point for the computer
when programming the transceiver.
8-Character Alphanumeric Display - This area of
the display indicates the selected system and group
(Section 2.3.4), the dialed number (Section 2.7), error
conditions, and other information (Section 2.12.4).
Battery Release Button (Not shown) - This button is
located on the bottom end of the transceiver, and it is
pressed to release the battery so that it can slide downward and be removed from the radio.
S - Indicates that the displayed system is in the scan
list and scanned normally (see Section 2.6.7).
- The base portion of this icon is displayed when
the displayed group is programmed for telephone
calls, and the top portion (receiver) is displayed when
the dial mode is selected (see Section 2.7).
NOTE: Turn off transceiver power before removing
the battery. This ensures that current settings are properly saved and the de-registration message is sent.
January 2001
Part No. 001-7240-001
2-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:03:06 09:05:54
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : AdobePS5.dll Version 5.1.2
Title                           : Section2.fm
Modify Date                     : 2001:03:06 09:05:54-06:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools