E Lead Electronic 120B Lazy pad Bluetooth User Manual 01

Download:
Mirror Download [FCC.gov]
Document ID	1197469
Application ID	wwF8vLSGK9RJnLZBI72UpA==
Document Description	(BSTKPB01, EL-120B)UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	221.22kB (2765207 bits)
Date Submitted	2009-11-11 00:00:00
Date Available	2009-11-11 00:00:00
Creation Date	2009-04-01 09:54:52
Producing Software	Adobe PDF library 7.77
Document Lastmod	2009-11-03 13:55:21
Document Title	01
Document Creator	Adobe Illustrator CS2

BT PAIRING MODE
● LED Indicators Status Description :
Power/ Pair : When the LED flashes quickly, LazyPad is
searching the last connected device.
Power/ Pair : When the LED flashes slowly, LazyPad is
accessing pairing mode and will pair other BT
device.
LED Indicators
Power/ Pair : When the LED is On, pairing procedure is
completed.
Power/ Pair : When the LED is Off, LazyPad is off.
Model: BSTKPB01, EL-120B
Quick User Manual
LOW-BATTERY WARNING AND CHARGING
Product Name: Lazy pad Bluetooth
LED Indicators Status Description:
Battery：When the LED flashes, LazyPad is under low-power status.
Battery：When the LED is ON, LazyPad is charging.
Battery：When the LED is off, LazyPad power charging is completed.
When the Battery LED flashes, it stands for LazyPad is under low-power status, please
charge it as soon as you can.
Applicant: E-LEAD ELECTRONIC CO., LTD.
LazyPad can be charged via USB interface.
The Battery LED is ON stands for LazyPad is charging. User still can use LazyPad while
it’s charging via the connection of USB cable. And when charge is completed after 1~2
hours or so, user can proceed using wireless mode.
Auto Standby
For saving power consumption, LazyPad will enter Standby mode automatically
when it is not operated over 5 minutes. And user can push LazyPad button to
awake it from Standby mode.
Auto Turn off
For saving power consumption, LazyPad will turn off automatically when it is
not operated over 2 hours. And user can push the power switch in the back of
LazyPad to restart it again.
The main procedure of BT connection
● Here are some descriptions of connection method of LazyPad and Notebook which has built-in
BT function.
Connecting to the NB for the first time
1.Turn on LazyPad→ LazyPad will search the last connected device → If failed, LazyPad will access
pairing mode automatically.
2. Activate the BT setup menu of NB→ detect BT device→ detect the service contracts that provided
by BT device manufacturer→ register setup information ( The function of auto-connection will be
activated after completion of register, when users turn on LazyPad next time, these two devices
will connect automatically.)
● Driver can be downloaded from Noahpad official website
http://www.noahpad.com
-1a-1 Add a Bluetooth Device
e.Verification
Users can find BT icon on the lower right side of
desktop, and then right click the BT icon and select the
“add new BT device”
The system will start to connect and verify passkey,
and activate related services.
And the left window will come out, please check”My
device is set up and ready to be found”, then select
“next step”(The LED indicator status of LazyPad
should be “flash slowly” for this step, please check.)
b.Search BT device
And then the window of searching BT devices around
NB will come out.
And then select “Finish”.
Attention
All the set up steps mentioned above are needed just for the first time use. The next time use,
it will proceed pairing mode automatically, and no need to re-set up.
c.Select the BT device named LazyPad
After the completion of searching, some BT devices
around users will be listed. And select the device
named LazyPad.
Note: In some cases, the name of LazyPad won’t be
showed in the searched list but Arabic numeral (ID
NO.) instead. Please compare the ID NO. back on
LazyPad and the searched list, and then select the
same ID No. to complete this step.
d.Passkey
Next, an inquiry window will come out and inquiry
about if needs code for verification or not. And
select “Choose a passkey for me”, the device will
automatically respond passkey to BT device. And
then select “Next step”
-2-
Connecting for the second time
● When users turn on LazyPad , the LazyPad will connect the last connected device.
● Turn on LazyPad → Pair LED flashing → Pair LED on to stop flashing that has
been connected successfully。
Identification of BT devices
Your PC or NB maybe will search many BT devices around, and there are two
methods to identify LazyPad.
1. Name of BT device: LazyPad
2. ID NO. of BT device: If the device name isn’t showed in searching list, you could
check the ID NO. in the back of LazyPad and find out the same ID NO. in
searching list.
NO. 37, GUNGDUNG 1ST RD., SHENGANG SHIANG, CHANGHUA, 509, TAIWAN
(Chuan-Hsin Industrial Park)
TEL: +886-4-7977277
FAX: +886-4-7977165
http://www.e-lead.com.tw
E-mail: sales@e-lead.com.tw
CHINA SUBSIDIARY (JIANGSU E-LEAD) TEL: +0512-63404789 FAX: +0512-63404533
-3-
BT PAIRING MODE
● LED Indicators Status Description :
Power/ Pair : When the LED flashes quickly, LazyPad is
searching the last connected device.
Power/ Pair : When the LED flashes slowly, LazyPad is
accessing pairing mode and will pair other BT
device.
LED Indicators
Power/ Pair : When the LED is On, pairing procedure is
completed.
Power/ Pair : When the LED is Off, LazyPad is off.
Model: BSTKPB01, EL-120B
Quick User Manual
LOW-BATTERY WARNING AND CHARGING
Product Name: Lazy pad Bluetooth
LED Indicators Status Description:
Battery：When the LED flashes, LazyPad is under low-power status.
Battery：When the LED is ON, LazyPad is charging.
Battery：When the LED is off, LazyPad power charging is completed.
When the Battery LED flashes, it stands for LazyPad is under low-power status, please
charge it as soon as you can.
Applicant: E-LEAD ELECTRONIC CO., LTD.
LazyPad can be charged via USB interface.
The Battery LED is ON stands for LazyPad is charging. User still can use LazyPad while
it’s charging via the connection of USB cable. And when charge is completed after 1~2
hours or so, user can proceed using wireless mode.
Auto Standby
For saving power consumption, LazyPad will enter Standby mode automatically
when it is not operated over 5 minutes. And user can push LazyPad button to
awake it from Standby mode.
Auto Turn off
For saving power consumption, LazyPad will turn off automatically when it is
not operated over 2 hours. And user can push the power switch in the back of
LazyPad to restart it again.
The main procedure of BT connection
● Here are some descriptions of connection method of LazyPad and Notebook which has built-in
BT function.
Connecting to the NB for the first time
1.Turn on LazyPad→ LazyPad will search the last connected device → If failed, LazyPad will access
pairing mode automatically.
2. Activate the BT setup menu of NB→ detect BT device→ detect the service contracts that provided
by BT device manufacturer→ register setup information ( The function of auto-connection will be
activated after completion of register, when users turn on LazyPad next time, these two devices
will connect automatically.)
● Driver can be downloaded from Noahpad official website
http://www.noahpad.com
-1a-1 Add a Bluetooth Device
e.Verification
Users can find BT icon on the lower right side of
desktop, and then right click the BT icon and select the
“add new BT device”
The system will start to connect and verify passkey,
and activate related services.
And the left window will come out, please check”My
device is set up and ready to be found”, then select
“next step”(The LED indicator status of LazyPad
should be “flash slowly” for this step, please check.)
b.Search BT device
And then the window of searching BT devices around
NB will come out.
And then select “Finish”.
Attention
All the set up steps mentioned above are needed just for the first time use. The next time use,
it will proceed pairing mode automatically, and no need to re-set up.
c.Select the BT device named LazyPad
After the completion of searching, some BT devices
around users will be listed. And select the device
named LazyPad.
Note: In some cases, the name of LazyPad won’t be
showed in the searched list but Arabic numeral (ID
NO.) instead. Please compare the ID NO. back on
LazyPad and the searched list, and then select the
same ID No. to complete this step.
d.Passkey
Next, an inquiry window will come out and inquiry
about if needs code for verification or not. And
select “Choose a passkey for me”, the device will
automatically respond passkey to BT device. And
then select “Next step”
-2-
Connecting for the second time
● When users turn on LazyPad , the LazyPad will connect the last connected device.
● Turn on LazyPad → Pair LED flashing → Pair LED on to stop flashing that has
been connected successfully。
Identification of BT devices
Your PC or NB maybe will search many BT devices around, and there are two
methods to identify LazyPad.
1. Name of BT device: LazyPad
2. ID NO. of BT device: If the device name isn’t showed in searching list, you could
check the ID NO. in the back of LazyPad and find out the same ID NO. in
searching list.
NO. 37, GUNGDUNG 1ST RD., SHENGANG SHIANG, CHANGHUA, 509, TAIWAN
(Chuan-Hsin Industrial Park)
TEL: +886-4-7977277
FAX: +886-4-7977165
http://www.e-lead.com.tw
E-mail: sales@e-lead.com.tw
CHINA SUBSIDIARY (JIANGSU E-LEAD) TEL: +0512-63404789 FAX: +0512-63404533
-3-
BT PAIRING MODE
● LED Indicators Status Description :
Power/ Pair : When the LED flashes quickly, LazyPad is
searching the last connected device.
Power/ Pair : When the LED flashes slowly, LazyPad is
accessing pairing mode and will pair other BT
device.
LED Indicators
Power/ Pair : When the LED is On, pairing procedure is
completed.
Power/ Pair : When the LED is Off, LazyPad is off.
Model: BSTKPB01, EL-120B
Quick User Manual
LOW-BATTERY WARNING AND CHARGING
Product Name: Lazy pad Bluetooth
LED Indicators Status Description:
Battery：When the LED flashes, LazyPad is under low-power status.
Battery：When the LED is ON, LazyPad is charging.
Battery：When the LED is off, LazyPad power charging is completed.
When the Battery LED flashes, it stands for LazyPad is under low-power status, please
charge it as soon as you can.
Applicant: E-LEAD ELECTRONIC CO., LTD.
LazyPad can be charged via USB interface.
The Battery LED is ON stands for LazyPad is charging. User still can use LazyPad while
it’s charging via the connection of USB cable. And when charge is completed after 1~2
hours or so, user can proceed using wireless mode.
Auto Standby
For saving power consumption, LazyPad will enter Standby mode automatically
when it is not operated over 5 minutes. And user can push LazyPad button to
awake it from Standby mode.
Auto Turn off
For saving power consumption, LazyPad will turn off automatically when it is
not operated over 2 hours. And user can push the power switch in the back of
LazyPad to restart it again.
The main procedure of BT connection
● Here are some descriptions of connection method of LazyPad and Notebook which has built-in
BT function.
Connecting to the NB for the first time
1.Turn on LazyPad→ LazyPad will search the last connected device → If failed, LazyPad will access
pairing mode automatically.
2. Activate the BT setup menu of NB→ detect BT device→ detect the service contracts that provided
by BT device manufacturer→ register setup information ( The function of auto-connection will be
activated after completion of register, when users turn on LazyPad next time, these two devices
will connect automatically.)
● Driver can be downloaded from Noahpad official website
http://www.noahpad.com
-1a-1 Add a Bluetooth Device
e.Verification
Users can find BT icon on the lower right side of
desktop, and then right click the BT icon and select the
“add new BT device”
The system will start to connect and verify passkey,
and activate related services.
And the left window will come out, please check”My
device is set up and ready to be found”, then select
“next step”(The LED indicator status of LazyPad
should be “flash slowly” for this step, please check.)
b.Search BT device
And then the window of searching BT devices around
NB will come out.
And then select “Finish”.
Attention
All the set up steps mentioned above are needed just for the first time use. The next time use,
it will proceed pairing mode automatically, and no need to re-set up.
c.Select the BT device named LazyPad
After the completion of searching, some BT devices
around users will be listed. And select the device
named LazyPad.
Note: In some cases, the name of LazyPad won’t be
showed in the searched list but Arabic numeral (ID
NO.) instead. Please compare the ID NO. back on
LazyPad and the searched list, and then select the
same ID No. to complete this step.
d.Passkey
Next, an inquiry window will come out and inquiry
about if needs code for verification or not. And
select “Choose a passkey for me”, the device will
automatically respond passkey to BT device. And
then select “Next step”
-2-
Connecting for the second time
● When users turn on LazyPad , the LazyPad will connect the last connected device.
● Turn on LazyPad → Pair LED flashing → Pair LED on to stop flashing that has
been connected successfully。
Identification of BT devices
Your PC or NB maybe will search many BT devices around, and there are two
methods to identify LazyPad.
1. Name of BT device: LazyPad
2. ID NO. of BT device: If the device name isn’t showed in searching list, you could
check the ID NO. in the back of LazyPad and find out the same ID NO. in
searching list.
NO. 37, GUNGDUNG 1ST RD., SHENGANG SHIANG, CHANGHUA, 509, TAIWAN
(Chuan-Hsin Industrial Park)
TEL: +886-4-7977277
FAX: +886-4-7977165
http://www.e-lead.com.tw
E-mail: sales@e-lead.com.tw
CHINA SUBSIDIARY (JIANGSU E-LEAD) TEL: +0512-63404789 FAX: +0512-63404533
-3-
BT PAIRING MODE
● LED Indicators Status Description :
Power/ Pair : When the LED flashes quickly, LazyPad is
searching the last connected device.
Power/ Pair : When the LED flashes slowly, LazyPad is
accessing pairing mode and will pair other BT
device.
LED Indicators
Power/ Pair : When the LED is On, pairing procedure is
completed.
Power/ Pair : When the LED is Off, LazyPad is off.
Model: BSTKPB01, EL-120B
Quick User Manual
LOW-BATTERY WARNING AND CHARGING
Product Name: Lazy pad Bluetooth
LED Indicators Status Description:
Battery：When the LED flashes, LazyPad is under low-power status.
Battery：When the LED is ON, LazyPad is charging.
Battery：When the LED is off, LazyPad power charging is completed.
When the Battery LED flashes, it stands for LazyPad is under low-power status, please
charge it as soon as you can.
Applicant: E-LEAD ELECTRONIC CO., LTD.
LazyPad can be charged via USB interface.
The Battery LED is ON stands for LazyPad is charging. User still can use LazyPad while
it’s charging via the connection of USB cable. And when charge is completed after 1~2
hours or so, user can proceed using wireless mode.
Auto Standby
For saving power consumption, LazyPad will enter Standby mode automatically
when it is not operated over 5 minutes. And user can push LazyPad button to
awake it from Standby mode.
Auto Turn off
For saving power consumption, LazyPad will turn off automatically when it is
not operated over 2 hours. And user can push the power switch in the back of
LazyPad to restart it again.
The main procedure of BT connection
● Here are some descriptions of connection method of LazyPad and Notebook which has built-in
BT function.
Connecting to the NB for the first time
1.Turn on LazyPad→ LazyPad will search the last connected device → If failed, LazyPad will access
pairing mode automatically.
2. Activate the BT setup menu of NB→ detect BT device→ detect the service contracts that provided
by BT device manufacturer→ register setup information ( The function of auto-connection will be
activated after completion of register, when users turn on LazyPad next time, these two devices
will connect automatically.)
● Driver can be downloaded from Noahpad official website
http://www.noahpad.com
-1a-1 Add a Bluetooth Device
e.Verification
Users can find BT icon on the lower right side of
desktop, and then right click the BT icon and select the
“add new BT device”
The system will start to connect and verify passkey,
and activate related services.
And the left window will come out, please check”My
device is set up and ready to be found”, then select
“next step”(The LED indicator status of LazyPad
should be “flash slowly” for this step, please check.)
b.Search BT device
And then the window of searching BT devices around
NB will come out.
And then select “Finish”.
Attention
All the set up steps mentioned above are needed just for the first time use. The next time use,
it will proceed pairing mode automatically, and no need to re-set up.
c.Select the BT device named LazyPad
After the completion of searching, some BT devices
around users will be listed. And select the device
named LazyPad.
Note: In some cases, the name of LazyPad won’t be
showed in the searched list but Arabic numeral (ID
NO.) instead. Please compare the ID NO. back on
LazyPad and the searched list, and then select the
same ID No. to complete this step.
d.Passkey
Next, an inquiry window will come out and inquiry
about if needs code for verification or not. And
select “Choose a passkey for me”, the device will
automatically respond passkey to BT device. And
then select “Next step”
-2-
Connecting for the second time
● When users turn on LazyPad , the LazyPad will connect the last connected device.
● Turn on LazyPad → Pair LED flashing → Pair LED on to stop flashing that has
been connected successfully。
Identification of BT devices
Your PC or NB maybe will search many BT devices around, and there are two
methods to identify LazyPad.
1. Name of BT device: LazyPad
2. ID NO. of BT device: If the device name isn’t showed in searching list, you could
check the ID NO. in the back of LazyPad and find out the same ID NO. in
searching list.
NO. 37, GUNGDUNG 1ST RD., SHENGANG SHIANG, CHANGHUA, 509, TAIWAN
(Chuan-Hsin Industrial Park)
TEL: +886-4-7977277
FAX: +886-4-7977165
http://www.e-lead.com.tw
E-mail: sales@e-lead.com.tw
CHINA SUBSIDIARY (JIANGSU E-LEAD) TEL: +0512-63404789 FAX: +0512-63404533
-3-
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with FCC RF exposure compliance
requirements, please avoid direct contact to the transmitting antenna during
transmitting.
" This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provide with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance. "

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Create Date                     : 2009:04:01 09:54:52+09:00
Creator                         : Adobe Illustrator CS2
Modify Date                     : 2009:11:03 13:55:21+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : 01
Creator Tool                    : Adobe Illustrator CS2
Metadata Date                   : 2009:11:03 13:55:21+08:00
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 20160 bytes, use -b option to extract)
Document ID                     : uuid:093DC4DC5F1EDE11A91CEAD37FB95994
Instance ID                     : uuid:105ba827-9c7a-4244-8e65-b884e6f5ad64
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:083DC4DC5F1EDE11A91CEAD37FB95994
Derived From Document ID        : uuid:073DC4DC5F1EDE11A91CEAD37FB95994
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\120B.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\120B.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\PICTURE\001.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\PICTURE\007.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\PICTURE\006.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\PICTURE\005.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\PICTURE\004.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\PICTURE\003.jpg, D:\A公司產品資料\說明書資料\EL-120\EL-120B\120-B001 英文\PICTURE\002.jpg
Manifest Reference Instance ID  : xmp.iid:F9AF4F1D5A8DDE11A0DEE150F95F38DE, xmp.iid:F9AF4F1D5A8DDE11A0DEE150F95F38DE, xmp.iid:68997B3CD35BDE11976C86859D100DBF, xmp.iid:900E297AD75BDE11976C86859D100DBF, xmp.iid:8F0E297AD75BDE11976C86859D100DBF, xmp.iid:6C997B3CD35BDE11976C86859D100DBF, xmp.iid:6B997B3CD35BDE11976C86859D100DBF, xmp.iid:6A997B3CD35BDE11976C86859D100DBF, xmp.iid:69997B3CD35BDE11976C86859D100DBF
Manifest Reference Document ID  : uuid:12CE7D5E7417DE11A715F4FB6F9BFFED, uuid:12CE7D5E7417DE11A715F4FB6F9BFFED, xmp.did:B1DAF593EB56DE1185558943698EC62F, xmp.did:E7B1FADDF956DE1185558943698EC62F, xmp.did:E5B1FADDF956DE1185558943698EC62F, xmp.did:E3B1FADDF956DE1185558943698EC62F, xmp.did:E1B1FADDF956DE1185558943698EC62F, xmp.did:B7DAF593EB56DE1185558943698EC62F, xmp.did:B3DAF593EB56DE1185558943698EC62F
Producer                        : Adobe PDF library 7.77
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 29.699996
Max Page Size H                 : 41.999951
Max Page Size Unit              : Centimeters
Font Name                       : Arial-BoldItalicMT, Arial-Black, ArialMT, AdobeMingStd-Light
Font Family                     : Arial, Arial, Arial, Adobe 明體 Std
Font Face                       : Bold Italic, Black, Regular, L
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 2.90, Version 2.40, Version 3.00, Version 5.003;PS 5;hotconv 1.0.49;makeotf.lib2.0.14802
Font Composite                  : False, False, False, False
Font File Name                  : ARIALBI.TTF, ariblk.TTF, ARIAL.TTF, AdobeMingStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Page Count                      : 9
For                             : �x�W_�u�] ��Aī Apple,
Bounding Box                    : -1 -1 848 1192
Container Version               : 11
Creator Version                 : 14

EXIF Metadata provided by EXIF.tools