E RAE Electronics Industry Co ELM-17ND LCD Monitor User Manual
E-RAE Electronics Industry Co Ltd LCD Monitor Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 470187 |
| Application ID | DN9n3tRc9rZ6f/gHLFLd9Q== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 224.48kB (2806046 bits) |
| Date Submitted | 2004-09-20 00:00:00 |
| Date Available | 2004-09-15 00:00:00 |
| Creation Date | 2004-08-28 08:15:37 |
| Producing Software | [ClibPDF Library 2.02-r1-1] PrintToPDF 2.2.1 |
| Document Lastmod | 2004-08-30 08:52:40 |
| Document Title | Network manual(øµ Æ-¿Œ¡ıøÎ).pdf |
| Document Creator | QuarkXPress¢‚ 4.1K |
| Document Author: | ¿Ã ¿¸¿℠|
Network monitor user guide ELM-1700N Series ELM-1900N Series Network monitor user gu ide ● Please observe all safety precautions when using this product. ● Please read this manual carefully before using this product. Items to note Items to note Correct posture for using the위한 LCD올바른 monitor LCD 모니터의 효과적 사용을 작업자세 ●This product is not a computer,but an independent device that simulated Windows.Unlike computers,this product does not support other peripheral devices or connection with communication equipment,and it does not support high quality videos or 3D games. Eye height With the monitor in the center,maintain 110。, degrees vertically and 70。 Horizontally. ●If this product will be used to allow one computer to be shared among multiple people, appropriate configurations should be set in Windows OS for security purposes. NTFS method of file service and the user account configurations must be set in administrator mode in order to maintain security and enable ongoing system maintenance.For more information, refer to guideline on Windows OS. Arm height Make sure the desk height is right about where the elbows are.Maintain an "L" hape with our arm and maintain the 70。 ~115。 angle. Back Keep your back straight. CATION Erae Electronics does not guarantee the accuracy of this manual. Erae Electronics does not approve of the sale for the use of this product for purposes other than what was originally intended and does not take any legal responsibility for any direct or indirect damages caused by the sale and use of this product in a manner not originally intended. It is important to keep a nice posture when working with a computer.To minimizes fatigue and maintain health,be sure to work in the following posture.In particular,the LCD monitor must be angled correctly in order for it to provide a clear picture. ・Windows XP and Windows 2000 are the registered trademarks of Microsoft Corporation. Other trademarks are the registered trademarks of each respectable company. Thank you for using Erae Electronics' products. This product has been thoroughly tested and is reliable and safe to use. This device has been approved for use in households and maybe used safely in a residence or other areas. ●Please read the safety precautions before using the product. ●Depending on the particular model purchased by the user, the content of this manual may not match completely. ●Erae does not take any responsibility for damages to the product caused by the use of non-standard parts or by not following the precautions mentioned in this manual. ●This product has been optimized for Windows 2000 Professional, Windows XP Home Edition, and Windows XP Professional. Use of the product with any other OS requires a separate software and the user must purchase this software or pay for an upgrade. This manual is copyrighted by Erae Electronics. This manual may not be duplicated or copied in whole, or in part, without the explicit, prior approval from Erae Electroncis. Content Checking content Checking content・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・6 Safety precautions Safety precautions・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・7-9 Content Using the application program Using NCT-2000-XP application program ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・32-33 View information for each station ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・34 Description of information /settings functions・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・35-36 Description of general functions・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・36 All UTMA Computers ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・36 Product introduction and connecting the peripheral devices Product introduction ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・10 Product features ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・10 Concept diagram ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・10 Connecting to the PC・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・11 Names and descriptions (when Digital RGB input device is not available) ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・12 Connecting peripheral devices (when Digital RGB input device is not available) ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・13 Names and descriptions (when Digital RGB input device is available) ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・14 Connecting peripheral devices (when Digital RGB input device is available) ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・15 Installing monitor driver Automatic installation ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・16 When installation not work (Window 95/98/ME) ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・17 When installation not work (Window 2000) ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・18 When installation not work(Window XP) ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・19 Registering and upgrading NCT-2000-XP online Registering NCT -2000 -XP online・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・37 References ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・38-40 Upgrading NCT-2000-XP online ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・41 Selecting and adjusting OSD screen Adjusting monitor screen ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・42 Adjusting screen/colors/menu/options ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・43-46 Other Installing and uninstalling application program Installing application program ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・20-22 Uninstalling application program・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・23-24 Network 네트워크configurations 환경 설정 Using IP sharing device (support switch for more than 100M,supports DHCP function)・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・25-28 Recommendations ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・47 Affect of settins・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・47 Self test function ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・48 FAQ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・49-52 Warnings ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・52 Product standards・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・53-54 Table of supported modes・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・55 Power save function・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・55 Using HUB(supports switching for more than 100M)・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・28-29 Directly connecting PC and NEOTUS ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・30-31 Checking contents Safety precautions This section provides guidelines for user's safety and preventing damage to the product.Be sure to read this carefully. Checking content If these safety precautions are ignored,it can lead to serious injury or even fatality and may also lead to property damage. Check to make sure the product package contain all parts and contact dealer if anything is missing. Contact the dealer if you ’d like to purchase optional parts. The actual parts in the package may look slightly different from the pictures below. The content of the package may be different depending on the model purchased. Power cord User guide Precautionary items are marked as "Warning" or "Caution". Warning : indicates conditions that can cause serious injury or fatality. Cation : indicates conditions that can cause light injury or product damage. Do not use damaged power cords or loose outlets. Do not unplug by pulling on the cord or using wet hands. Be sure to plug into an outlet that has been grounded. There may be a risk of electric shock or fire. There may be a risk of electric shock or fire. There may be a risk of electric shock. RGB cable CATION Adapter DVI-D cable monitor driver And NEOTUS application program Installation CD Plug in the power cord securely so that it does not move. Do not severely bend the power cord or place heavy items on top of it. Do not plug in multiple power cords to a single outlet using extension cords. There may be a risk of electric shock or fire. There may be a risk of fire. Crossover adapter(optional) CATION >References When directly connecting the PC and NEOTUS,be sure to crossover cable or crossover adapter to connect to both side's direct LAN cable. When connecting directly to the PC,without using a switch hub,additional LAN card may be required and in this case,connect direct with crossover cable use conversion adapter in direct LAN cable to connect. To share the Internet,go to, "Network connections wizard ”,"Internet connections wizard" and configure the home network. CATION DVI-D cable Improperly plugged in power cord may cause a fire. Direct LAN (CAT5 LAN) Cable CATION CATION CATION When installing the monitor,leave some space between the wall and the monitor for ventilation. Make sure no table cloth,curtains or other flammable materials cover the ventilation outlet. If the temperature of the monitor becomes very high,it may cause a fire. If the temperature of the monitor becomes very high,it may cause a fire. CATION CATION Safety precautions Safety precautions Place the monitor on a flat surface,in a safe area,and place the monitor gently on the surface. If the product short circuits,it may cause product damage or injury. Do not place the product face down. TFT-LCD surface may be damaged. Do not insert picks,tools,or other metal pieces into the ventilation outlet or A/V unit. There may be a risk of electric shock or fire. Do not allow children to hold onto or climb on top of the monitor. Do not disassemble,repair or modify the monitor on your own. They may be injured when the monitor falls. This may cause electric shock or fire.If the monitor requires a repair,please contact our service center. Do not place candles or lit cigarettes on tope of the monitor or near the ventilation outlet. There may be a risk of fire. Warn ig CATION CATION Unplug the monitor when it will not be used for a long time. Too much dust can cause excessive heat,start a fire or cause smoking. CATION If you smell smoke or if the monitor begins to smoke,immediately turn off the power and contact our service center. Set the PC so that it converts to DPMS mode when the monitor is not used for a while. Use a screen saver that has motions. Warn ig If you smell smoke or if the monitor begins to smoke,immediately turn off the power and contact our service center. There may be a risk of electric shock or fire. There may be a risk of electric shock or fire. CATION CATION CATION CATION Clean dust and wipe water away from power plug pins and the surrounding area. Clean dust and wipe water away from power plug pins Do not use commercial wax,benzenes,alchohol,paint thinner,soaps and other chemical substances on the monitors and do not clean the monitor with wet cloth. There may be a risk of electric shock or fire. and the surrounding area. When cleaning the monitor,be sure to unplug it. There may be a risk of electric shock or fire. Do not install in bookcases or closets where ventilation is poor. There may be a risk of fire. CATION Warn ig Do not install in areas where it can be exposed to water (raing),oil,or moisture. CATION When cleaning the monitor,be sure to unplug it. There may be a risk of electric shock or fire. There may be a risk of electric shock,fire or product damage. CATION CATION Configure the PC to match the product's resolution and frequency. Failure to do so may strain the eye and cause poor eye sight. 17", 19" - 1280 x 1024 @ 60Hz CATION Warn ig Product introduction and connecting the peripheral devices Product introduction and connecting the peripheral devices Product introduction "NEOTUS"is a combination of LCD monitor and "WoIP:Windows over IP" technology that allows up to 10 NEOTUS to be connected to a single computer to enable up to 10 people to share the single computer.In addition,the user may use NEOTUS as a normal monitor by connecting the monitor directly to a PC. Connecting to the PC ● Connecting directly to PC Product Features Provides sophisticated design,simple installa- ●A new concept product that combines monitor with network functions. ●May be used only as a monitor. tion and ease of use. ●Uses standard TCP/IP based Ethernet. ●Provides high scalability and data security. ●Uses WoIP (Window over IP)protocol. ●Requires low power and does not produce noise. >References When multiple units are used simultaneously,the PC must have sufficient performance capacity and the user may experience different levels of speed or compatibility depending on the application program being used.Refer to the technical overview section on the website. Product introduction ● Connect to PC and hub (or router) HUB HUB Recommended PC specifications ●When using 1 unit: Intel Pentium 4 1.0GHz,main memory of 256MB or more ●When using 2-3 units : HT technology based Intel Pentium 4 2.4GHz,main memory of 512MB or more ●When using 4-7 units : HT technology based Intel Pentium 4 3.0GHz,main memory of 1024MB or more ●When using 8-10 units : HT technology based Intel Pentium 4 3.2GHz,main memory of 2048MB or more Compatible OS (Operating System) ●Windows XP Home/Professional ●Windows 2000 Professional 10 11 Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is not available) Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is not available) Front 3.5ΦStereo Jack ELM-1700N Series SOURCE MENU ELM-1900N Series Speaker PS/2 Jack Keyboard PS/2 Jack Mouse RJ45 Jack LAN SELECT - Turns power on/off. Power SOURCE - press the button to change the input signal. (Analog Network Analog RGB Analog) MENU - Opens OSD menu. SELECT - select a menu item.When the button is pressed while /OSD is off,automatic adjustment will be made. Speaker Keyboard Mouse LAN ◀, ▶ - Navigate OSD menu or adjust settings. LED Rear Connect POWER Connect PC Power outlet Analog RGB outlet Speaker connection outlet Keyboard connection outlet Mouse connection outlet LAN connection outlet 12 13 Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is available) Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is available) Front 3.5ΦStereo Jack ELM-1700N Series SOURCE MENU ELM-1900N Series Speaker PS/2 Jack PS/2 Jack Keyboard Mouse Keyboard Mouse RJ45 Jack LAN SELECT - Turns power on/off. Power SOURCE - press the button to change the input signal. (Analog Digital Network Digital RGB Analog RGB Analog) MENU - Opens OSD menu. SELECT - select a menu item.When the button is pressed while /OSD is off,automatic adjustment will be made. Speaker LAN ◀, ▶ - Navigate OSD menu or adjust settings. LED Rear Connect POWER Connect PC Power outlet Digital RGB input outlet Analog RGB input outlet Speaker connection outlet Keyboard connection outlet Mouse connection outlet LAN connection outlet 14 15 Installing monitor driver Installing monitor driver If the driver program is damaged,download it from the following website. ・Internet : http://www.erae.com/→Customer Service →User guide and documents ・Internet : http://www.neotus.co.kr Automatic Installation When installation does not work (Window 95/98/ME) 1. Insert the CD packaged with NEOTUS in the CD-ROM. 2. Double click on Monitor Driver/Install.exe file in the CD and follow the below steps. 1. Insert the CD packaged with NEOTUS in the CD-ROM. 2. In Windows 95 or later versions of OS,the monitor is automatically detected as shown by the plug &play function. (Connecting to Analog RGB or DVI) 3. Complete the installation as follows. → → Click "OK" Click "OK" "Search for an appropriate driver" Click "Next" → → → → Click "YES" Click "Yes" Click "Finish" Monitor installation is complete. ・If the monitor driver is installed,resolution and frequency will be set at optimal settins for clearer picture. 16 17 Installing monitor driver Installing monitor driver When installation does not work (Windows 2000) When installation does not work (Windows XP) 1. Insert the CD packaged with NEOTUS in the CD-ROM. 1. Insert the CD packaged with NEOTUS in the CD-ROM. 2. Double click on Monitor Driver/Install.exe file in the CD and follow the below steps. 2. Double click on Monitor Driver/Install.exe file in the CD and follow the below steps. → → Click "OK" Click "OK" Click "OK" Click "OK" → → → Click "Yes" Monitor installation is complete. 18 Click "Yes" 연 결 및 설 치 → Click "OK" Click "Yes" Monitor installation is complete. 19 Installing and uninstalling application program Installing the application program Installing and uninstalling application program 4. Select the folder to install the program to and click .To install to a different folder, click and select the desired folder. 5. When the screen shown to the right appears,enter the administrator password,select "Network management console" and click .(Security is provided by the console manager password, therefore enter the password and re-enter it for confirmation.To install the network management console,select "Network management console" and click .) ● Installing NCT-2000-XP "NCT-2000-XP"is a software that allows NEOTUS to be connected to a host PC (regular PC) and enable the NEOTUS user to use the PC like the user's own PC. 1. When 'NCT-2000-XP'installation screen appears,click button. >References Administrator password : Administrator password is used to restrict the use of network management console. 2. 3. 20 When "NCT-2000-XP-User License" screen appears,read the license agreement and click "I agree". (If you do not accept the license agreement,click "Cancel" to exit the application program installation.) When the screen shown to the right appears,verify the items and click . Network management console : When multiple host PCs are being used,this management program allows the host PCs and the connected NEOTUS t be managed from one place and it can also be used to manage local user groups. 6. When installing the application program,make sure the PC and NEOTUS are connected properly. Refer to the following when installing the application program. "NCT-2000-XP" is a software that allows NEOTUS to be connected to a host PC (regular PC) and enable the NEOTUS user to use the PC like the user's own PC. When the following screen appears,enter the produce serial number,license key,company, and email and click . 7. Click "Next" When the screen shown to the right appears,click button. 21 Installing and uninstalling application program ● References Installing and uninstalling application program 10. Serial number:Enter one serial number for each NEOTUS. If multiple NEOTUS monitors have been installed,refer to the information below.(Click and enter serial numbers for all NEOTUS units.) 1. In the next screen,select create new account to add a new users (ex:user3) ※ Refer to the OS user manual for information on user accounts.. Click the button. 11. 2. Click the button. 3. When the screen shown to the right appears,enter the serial number and license key and click .The newly entered serial number is added.(Look at the back of the product for the serial number and license key) Click after completing the installation When the installation is complete,the following screen appears.Select, "Yes, restart the computer now" and click the button. Uninstalling application program 4. 8. 9. 22 Added serical number can be checked. 1. From Windows,click , ▶ NCT-2000XP ▶ Remove NCT-2000-XP>. Execute "Delete application program" only when needed. 2. When the "NCT-2000-XP" screen appears, click . (If the administrator password was setup,enter the password and click .) Installs the program. Following screen appears during installation,and if you wish to add a new user,click "Yes". 23 Installing and uninstalling application program 3. Select "Remove all componenst and registration information" and click . Network configurations Using IP sharing device (supports switching of 100M or more,support DHCP function) When IP sharing device is used,fixed IP as well as dynamic IP can be used.Except,dynamic IP can only be used if the IP sharing device has DHCP server function and the DHCP function has been enabled.If you wish to IP sharing device but also use fixed IP,refer to section on "Connecting to Hub". Here,we explain using Windows XP.If the PC has Windows XP or Windows 2000 and the network card is installed,the configurations and settings will depend on the type of environment the user wishes to use the system.Refer to the following to check the PC's network settings and configure the NEOTUS settings. >Precautions during installation 1. Click from Windows and select "Control Panel". 4. 24 Installing and uninstalling application program When the uninstallation is complete,the following screen appears.Select, "Yes,restart the computer now" and click the button. 2. From the "Control Panel", double click on the "Network connections" icon.Select "Local Area connections". right click with the mouse and select "Properties". 3. Click the "Advanced" tab,and if "Internet connection firewall" is checked, click the "Settings" b utton on the bottom and uncheck 'Remote desktop". If this is checked, the desktop may not allow the monitor to connect. 1. To configure the PC,click from Windows and select "Control Panel". (For Windows 200,click from Windows and select .) 2. Double click on the "Network connections" icon.(For Windows 2000,double click on the "Network and dialup connections" icon. 3. Select "Local Area connections", right click with the mouse and select"Properties". (For Windows 2000,select the LAN card ,right click with the mouse and select "Properties".) 4. Select "Internet Protocol (TCP/IP)" and click .Select "Internet Protocol (TCP/IP)" and click . 25 Network configurations 5. When the following screen appears,select "Obtain an IP address automatically" and "Obtain DNS server address automatically" and click . Network configurations ●References An IP address has been automatically allocated to the PC,and you need to know this IP addres. 6. 7. 1. Click from Windows and select "RUN". 2. In the "Open" field,enter "cmd" and click . To configure NEOTUS' Settings,turn on the NEOTUS monitor and press the input signal button to conver to the network and click the "Setup" menu from the start page. Click the "Network" tab and select "Get Dynamic IP address (or "Use Static IP address ")and enter the IP address and the gateway. 3. 8. Set "Autodetection" for terminal-server connection list,as shown below. 4. 9. In the Dos prompt window,enter "ipconfig" and hit the key to obtain the IP addreass, subnet mask and gateway assigned to the PC. Enter the IP address found here in the Terminal Server network address"field of the NEOTUS. Above settings can be verified from the monitor connected directly to the PC or from an already installed NEOTUS monitor. Click the 'TS Options' tab and configure as follows.(Enter the host computer's IP address in the Terminal Server Network address field.) ・You can find the IP address as follows. 26 27 Network configurations Network configurations 10. You can see that PC and NEOTUS are now connected.You can start using the NEOTUS. 11. 5. Configure the settings as shown in the screen shot to the right and click . (Select "Next IP address" and enter the IP address,subnet mask and default gateway.Then select "Use the following DNS server address" and enter the default DNS server address.) 6. To configure NEOTUS' settings,turn on the NEOTUS monitor and press the input signal button to conver to the network and click the "Setup" menu from the start page. 7. Select the "Network" tab,select "Use Static IP address" and enter the IP address and gateway. 8. 'Click the 'TS Options' tab and configure as follows. (Enter the host computer's IP address set in step 5 in the Terminal Server Network address field.) 9. When network configuration is complete,click to exit the settings screen and click . When configuration is complete,click to exit the settings screen and click . Using HUB (supports switching for more than 100M) Click from Windows and select "Control Panel". To connect to the hub,both the host computer and NEOTUS must use fixed IP.Select "Network Connections" ("Network and dial-up connections") in the "Control Panel" and select the LAN card. Right click with the mouse and select "Properties" ("Registration Information ") and set to fixed IP for both the computer and NEOTUS. Set the fixed IP as follows 1. Click from Windows and select "Control Panel". 2. Double click on the "Nework Connection" icon. 3. 4. Select the LAN card ,right click with the mouse and select "Properties". (For Windows 2000,select the LAN card ,right click with the mouse and select "Properties". Select "Internet Protocol (TCP/IP)" and click . (For Windows 2000,select .) can see that PC and NEOTUS are now connected. 10. You You can start using the NEOTUS. 28 29 Network configurations Network configurations Directly connecting PC and NEOTUS 6. To configure NEOTUS' settings,turn on the NEOTUS monitor and press the input signal button to conver to the network and click the "Setup" menu from the start page. 7. Select the 'Network' tab.Then,select the 'Use Static IP address'item to enter as follows.(For example,enter IP Address : 192.168.0.2, Gateway : 000.000.000.000. IP address and gateway are different depending on the host PC's environment.) 8. When configuration is complete,click to exit the settings screen and click . 9. You can see that PC and NEOTUS are now connected. You can start using the NEOTUS. ● When there is one LAN card ((supports 100M or higher)(Internet cannot be used) 1. To configure the PC,click from Windows and select "Control Panel". (For Windows 200,click from Windows and select .) 2. Double click on "Network Connections" (For Windows 2000,double click on the "Network and dial-up connections" icon.) 3. Select the LAN card ,right click with the mouse and select "Properties".(For Windows 2000, select "Registration Information".) >References If connecting multiple NEOTUS units,there must the same number of LAN cards installed in the PC as the number of NEOTUS you wish to connect. 4. 5. 30 Select "Internet Protocol (TCP/IP)" and click . Configure the settings as shown in the following screen and click .(For example, IP address:192.168.0.1, Subnet mask:255.255.255.0.IP address and subnet mask are different depending on the PC environment.) 31 Using the application program Using the application program Using the application NCT-2000-XP When NCT-2000-XP application program is installed as explained in the previous chapter,the following application program groups are automatically created. From Windows,click then select to check that NCT-2000-XP application program has been installed. ● Station When you select station,you can see the connected NEOTUS' Information or see that the NEOTUS unit is waiting to be connected. ● Session #01 If you select this item,you can see the program currently being used by NEOTUS. ● Executing NCT-2000-XP console NCT-2000-XP console program can be used to check whether NEOTUS' is running or stopped and check the administrative information of the NEOTUS. ● Stop Station This items is used to stop a particular monitor and initialize the session,or to reset when the user has requested a reset. ● Terminal-Sever Settings Optional function in each category can be used.Select "Terminal-Server Setting" menu to open NCT-2000-XP management console' screen. Enter the password and click the button.(If the 'administrator-ignore password'item is selected when installing application,the 'NCT-2000-XP administration console'screen will not be displayed.) 32 ● Send Message This icon is used to exchange simple messages between host PCs and the NEOTUS units on the network. 33 Using the application program Using the application program View each station information description of configuration function ● Using the application program Product version,manufactured date,manufacturer,copyright and website for technical support are shown. ● Product Information Shows the information of the connected NEOTUS. ● Information ● License Information This shows user information. 1.Station name : This can be changed by the user.The default name is Station #1. 2.Logon user : Logon name of the NEOTUS user. 3.Default user : Shows the name of the user that last logged in. 4.Status : Show whether the unit is connected and in use or is in standby. 5.Logon program : This menu can be used to designate automatic program start when the user logs on. 6.Logon folder : You can designate a folder to automatically connect to after logon. 7.Enable automatic start : Select whether to enable automatic start. 8.Display ID : Shows the connected NEOTUS' display device. 9.Hardware ID : Shows the connected NEOTUS' virtual hardware. 10.Keyboard ID : Shows the connected NEOTUS' keyboard information. 11.Pointer ID : Shows the connected NEOTUS' mouse information. 34 ● Programs that are ready 1.Maximum number of stations : Indicates the maximum number of monitors that can be connected to a PC. 2.Number of stations : Shows the number of monitors currently connected. 3.Local computer : Name of the computer used as host PC. 4.Local user : User name of the monitor connected to the host PC. 35 Registering and upgrading NCT-2000-XP online Registering and upgrading NCT-2000-XP online ● System configuration 5. System start time:Displays the length of time the system was used after the host PC started. 6. Main station automatic logon:If there is no password in the main station,you can choose whether to login automatically. 7. Exit Timeout (Seconds):You can set the exit time. 8. Disable notice transmissions:Yes/No 9. Administrator password:Password can be set to restrict access to console menus. ※ The screen where it can be designated during initial application installation,,appears. Registering NCT-2000-XP online To received NCT-2000-XP program upgrades and other A/S services, you must register your monitor.Following is the directions for registering online. 1. From Windows,click ,then go to button. ● Serial number: This item allows new serial number to be added when a new monitor is to be added.You can right click with the mouse on the serial number category or in the screen to the right to add a new serial number. - Add a serial number : Serial number can be added one at a time. - Bring serial number : Group of serial numbers can be saved in text format.This allows the serial number to be inputted without entering each serial number separately. Description of general configuration function Keyboard and mouse information,and information on removable devices connected to the PC can be verified. >References (If "Administrator-ignore password" was selected during installation,then the 'NCT-2000-XP management console' will not appear.) 3. Enter the user information and click . 4. Registering and upgrading NCT-2000-XP online using application program Select the registratio method and click . All UTMAComputers category You can see all host PCs and monitors on the network.Refer to the previous section for information on using the monitor.Select 'All UTMA Computers' and the 'NCT-2000-XP management condole' screen will appear.Enter the password and click the button. (If "Administrator-ignore password" as selected during installation,then the 'NCT-2000-XP management console'will not appear.) 36 37 Registering and upgrading NCT-2000-XP online References ● When "Offline - Create registration file" is selected 1. This is the user registration screen.To change the information,click and make the necessary changes and to continue,click . 3. When all information has been entered correctly,serial number registration starts.Do not turn off the computer or disconnect from the Internet unit the registration is complete. ● When "Online - Cancel Internet"is selected 38 ● When "Online -Internet registration" is selected Select the serial number to register and click . If the computer cannot connect to the Internet or it does not support online registration, select "Offline Create registration file" to create the data file and use email from another PC or send the diskette or CDROM with the file to the dealer. Select "Online Internet registration" and click .Select the serial number to register and click . 2. 1. Registering and upgrading NCT-2000-XP online After a serical number has been registered,in order to change the computer or to change the hard disk,the serial number registration must be canceled. 1. Select "Offline Create registration file" and click . 2. Select the serial number to register and click . 3. 4. 5. User registration information screen appears.To change the informaiton,click and make the necessary changes and to continue,click . Select the file directory and the file name and click . Send the file with registration information to the registration center or to the dealer. 39 Registering and upgrading NCT-2000-XP online Registering and upgrading NCT-2000-XP online ● When "Offline Cancel file/e-mail registration"is selected Registering and upgrading the NCT-2000-XP on the Internet Registering and upgrading the N C T -2 0 0 0 -X P on the Internet. 1. ● Upgrade using file Program download from the website and upgrade using CD or floppy disk Note) 1. In this case,user registration must have been completed from the previous version. 2. Make sure to cancel the serial number registration and delete previous version before installing the new version. Users who have completed their registration may upgrade the NCT-2000-XP program as follows. ● Direct upgrade through the Internet ● When "Offline - Cancel Registration" is selected 1. To cancel the registration offline, select this category and click . In order to upgrade the NCT-2000-XP program online,the user must have completed the user registration.In order to protect the user's data,current user information is temporarily save before the new version is installed. This allows the user to restore previous condition should a problem occur during the upgrade. 1. From Windows,click ,then go to . 2. When "Enter password" appears,enter the password and click the button. 3. To continue with the upgrade,click . 4. Click to begin the upgrade. Enter the 'serial number' and 'activation key'. Then, click the button.After completing registration, click the button. 41 Selecting and adjusting OSD screen Selecting and adjusting OSD screen Monitor screen adjustment Screen adjustment [OSD] start screen Selecting and adjusting OSD screen >Brightness Adjusts brightness. ◀ : Dims the screen. ▶ : Brightens the screen. >Contrast Adjusts contrast. ◀ : Darkens the contrast. ▶ : Lightens the contrast. >Phase Fine adjustment of phase. This cannot be adjusted in the digital mode. ◀ : The fine adjustment value decreases. ▶ : The fine adjustment value increases. Frequency OSD(On Screen Display) selection and screen adjustment 1. Click "Menu" to open OSD screen. Adjusts frequency sampling. This cannot be adjusted in the digital mode. ◀ : Reduces sampling frequency value. ▶ : Increases sampling frequency value. 2. Click ◀/▶ to select desired main menu. 3. Click "Select" after selecting the main menu. H position Adjusts H position. 4. The cursor moves to the lower menu. Use ◀/▶ button to go to the desired menu. 5. Click "Select" after selecting the lower menu. 6. Use ◀/▶ to adjust the settings. This cannot be adjusted in the digital mode. 7. Click the "Menu" button 3 times to close the OSD screen and save the adjustments. ◀ : Screen moves toward the right. ▶ : Screen moves toward the right. ※If "Menu" button is clicked during configuration,the screen will go to the previous screen. V position ※The number may change according to the saved value. Adjusts V position. This cannot be adjusted in the digital mode. ◀ : Screen moves toward the bottom. ▶ : Screen moves toward the top. 42 43 Selecting and adjusting OSD screen Color adjustment Selecting and adjusting OSD screen OSD Color adjustment detailed categories OSD >Menu time adjustment Adjusts time display on the menu. > Color intensity adjustment - Color intensity adjustment can be used to select the desired color. The default value is 7500K. ◀,▶ : Use this button to adjust the position of the OSD menu. >Adjusts menu position. [6500K] Warm colors [7500K] Standard colors [9300K] Cool colors Menu location adjustment ◀,▶ : Menu vertical position adjustment - Adjusts menu's vertical position. >Menu horizontal position adjustment Adjusts menu' horizontal position. ◀ : Screen moves toward the left. ▶ : Screen moves toward the right. [User] User can adjust the intensity of "Red", "Green", and "Blue" colors. >Menu vertical position adjustment Adjusts menu' vertical position. ◀ : Screen moves toward the bottom. ▶ : Screen moves toward the top. >Semi-transparent menu turns the menu semi-transparent. ◀/▶ : Use this button to adjust the transparency of the OSD background. 44 45 Other Selecting and adjusting OSD screen Options Recommendations To enjoy the optimal picture quality Options >1. TFT-LCD monitors have one specific resolution at which it provides the best picture quality.Therefore,the display quality may be lower if not set to the optimal resolution. Be sure to use the optimal resolution whenever possible. >Factory reset Select Factory reset and click "▶" key to reset the monitor's settings. The optimal resolution for each TFT LCD type is as follows. 17"/19" : 1280 x 1024 @ 60Hz >2. Due to the limitation of the current LCD panel manufacturing technology,items on the LCD screen may look 1PPM brighter or darker,but this does not affect the product's performance. Monitor's location can influence the display quality and other characteristics. LCD Panel Number of pixels : 17"/19":3,932,160개 >language Select Language and use ◀,▶buttons to select the desired language. >3. When cleaning the monitor,use a soft cloth with moderate amount of screen cleaner.Do not rub the surface of the screen too harshly.If you put too much pressure on the screen, it may cause a damage. >4. If you are not satisfied with the picture quality,use the uto Adjustment unction for better picture quality.If noise appears even after conducting the auto adjustment,use the fine adjustment. >5. If the screen stay on one picture for a long time it may cause shadowing.Set the computer to convert to sleep/save power mode when the monitor is not used for a certain period of time. >Resolution Shows the current resolution. Environmental Influence Monitor's location can influence the display quality and other characteristics. >1. If the speaker is close to the monitor,move the speaker away from the monitor. >2. Place radios,fans,clocks,phones and other electronics at least 1M from the monitor. 46 47 Other Other Self check function Warning If the monitor remain black even when it is properly connected to the computer,and the power light is blinking,use the following method to conduct self diagnosis. Please clean the exterior with dry cloth. ●Do not scratch the panel with fingernails or a sharp object. ●Do not sue benzene,pain thinner or other abrasive substance or a wet cloth. >1. Turn off the computer and the monitor. Use screen cleaner and a soft cloth to ●Do not use acetone,benzene or paint thinner. >2. Unplug the video cable from the monitor or the video card. clean the screen. Cable connection check function >3. Turn on the monitor. Input signal bandwidth check function. If the computer and the monitor are connected properly and the message does not disappear even after the cable is changed,please contact our service center. This monitor has a self test function that can test the status of its cable connection with the PC. CHECK CABLE >4. Turn off the monitor and reconnect the video cable,then turn on the computer and the monitor. If a small box resembling the screen appears,check to see if the cable came loose in the PC or the monitor. Input signal bandwidth check function Out of Range 48 If there is a problem with the input signal,the power light will blink red and the following message appears.Either there is a signal that is beyond the resolution supported by the monitor in this message,or the signal cable needs to be checked. Reboot in safe mode and adjust to the optimal resolution. 49 Other Other Product standards Product standards(model with DVI input outlet) (model without DVI input outlet) >Display portion(ELM-1700N/ELM-1900N Series(Without DVI unit)) Model ELM-1700N Series ELM-1900N Series Screen 337.92(H) × 270.336(V) 17.0 inch 376.32(H) × 301.056(V) 19.0inch Pixel pitch 0.264(H) × 0.264(W) 0.294(H)× 0.294(W) Maximum visual periphery 75。 / 60。 / 75。 / 75。 85。 / 85。 / 85。 / 85。 Display colors 16.2M 16.7M Response speed 13msec 25msec Brightness 300cd/㎡ 250cd/㎡ Contrast 500:1 500:1 Recommended resolution 1280 × 1024 (60Hz) Horizontal frequency 31KHz 79.98KHz 56Hz 75Hz Vertical frequency Signal input Analog RGB(15pin D-sub) AC (Adaptor) 110V DC (Monitor) 240V, 50Hz/60Hz 12V, 3.5A power Maximum power use 42W, power save mode 2W Excluding stand 387 × 328.9 × 53.5 431.2×364 ×55.9 Including stand 387 × 409.1 × 196 431.2 ×443.8×190 Weight 5.7Kg 6.4Kg Stand adjustment angles upward Features up 30。 down 5。 >Display portion(ELM-1700N/ELM-1900N Series(With DVI unit)) Model ELM-1700N Series 337.92(H) × 270.336(V) 17.0 inch 376.32(H) × 301.056(V) 19.0inch Pixel pitch 0.264(H) × 0.264(W) 0.294(H)× 0.294(W) 75。 / 60。 / 75。 / 75。 85。 / 85。 / 85。 / 85。 Display colors 16.2M 16.7M Response speed 13msec 25msec Brightness 300cd/㎡ 250cd/㎡ Contrast 500:1 500:1 Recommended resolution 1280 × 1024 (60Hz) Horizontal frequency 31KHz 79.98KHz Vertical frequency 56Hz 75Hz Signal input Analog RGB(15pin D-sub) AC (Adaptor) 110V Maximum visual periphery DC (Monitor) power 240V, 50Hz/60Hz 12V, 3.5A Maximum power use 42W, power save mode 2W Excluding stand 387 × 328.9 × 53.5 431.2×364 ×55.9 Including stand 387 × 409.1 × 196 431.2×443.8×190 Weight 5.7Kg 6.4Kg Stand adjustment angles upward Graphic OSD,automatic adjustment ELM-1900N Series Screen Features up 30。 down 5。 Graphic OSD,automatic adjustment >Network 1×PS/2 Keyboard port Support port 50 Protocol 1×PS/2 mouse port WoIP(Windows over IP) >Network TCP/IP 1×PS/2 Keyboard port 1×SPEAKER port Support 1×RJ45 LAN port OS Windows XP Home/Pro. Support Protocol 1×PS/2 mouse port WoIP(Windows over IP) TCP/IP Windows 2000 Pro. port 1×SPEAKER port Support 1×RJ45 LAN port OS Windows XP Home/Pro. Windows 2000 Pro. 51 Other Other Table of supported modes Resolution 640 × 480 720 × 400 800 × 600 1024 × 768 1280 × 1024 horizontal frequency (Khz) vertical frequency (Hz) 31.47 37.86 37.50 31.47 35.16 37.88 48.08 46.88 48.36 56.48 60.02 63.98 79.98 60 72 75 70 56 60 72 75 60 70 75 60 75 Power save function This reduces power use. When the monitor is in power save (sleep)mode,this can be seen by the colored power light that stays on,and the screen will come back on when you click the mouse or any key. This function works only if it is connected to a computer with a power save function. Power save function works as follows. 52 Power save function works as follows. Power save mode's sleep status color green orange Maximum power usage 37W 2W This device comply with part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interference that may cause undesired operation. This equipment has been tested and found to comply with the limit for a Class B digital Device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses, and can radiate radio frequency Energy and, if not installed and used in accordance with the instructions, If this equipment does cause harmful interference to radio communications. However, there is on guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, with can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the Receiver is connected. - Consult the dealer or an experience radio TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 53
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:08:28 08:15:37Z Subject : Keywords : UNREGISTERED Modify Date : 2004:08:30 08:52:40+09:00 Page Count : 27 Creation Date : 2004:08:28 08:15:37Z Producer : [ClibPDF Library 2.02-r1-1] PrintToPDF 2.2.1 Author : ¿Ã ¿¸¿⁄ Mod Date : 2004:08:30 08:52:40+09:00 Metadata Date : 2004:08:30 08:52:40+09:00 Creator : ¿Ã ¿¸¿⁄ Title : Network manual(øµ Æ-¿Œ¡ıøÎ).pdf Description :EXIF Metadata provided by EXIF.tools