E RAE Electronics Industry Co EPM-5010 Plasma Display User Manual 42 V6 PDP Monitor manual P

E-RAE Electronics Industry Co Ltd Plasma Display 42 V6 PDP Monitor manual P

Contents

Users Manual Part 1

●Please observe all safety precautions when using this product.●Please read this manual carefully before using this product.Product ManualPDP 50"
Power Supply - CautionPower Supply - WarningPower Supply - Warning2・Safety precautionsDo not use damaged electric cord/plug, or loose outlet.・It can cause an electric shock or a fire.Do not use multiple devices in anoutlet at the same time to avoid theoverload.・It may cause a fire due to overheatingfrom the outlet.Fully insert the plug into the outlet.・If the connection is unstable, it mayc a u s ea fire.AC plug shoul d not be touchedwith wet hands. It may cause anelectric shock.・It can cause an electrical shock.Be sure to ground the PDP powersource. ・It may cause an electric shock if it has afailure or electrical leakage. Only usethe proper pow er cord supp lied w it hPDP and connect it to an outlet with aground terminal.Be careful not to forcibly bend theelectric cords or press them with aheavy object. ・It may cause an electric shock or afire.When unplugging the AC cord, pullout by holding the plug itself andnot by pulling on the cord.・If the power cord is damaged. it may causea fire.This manual describes how to operatethe PDP properly and safely. Pleaseread this manual carefully.This manualshould be retained for future reference.
I n s t a l l a t i o n - CautionI n s t a l l a t i o n - WarningI n s t a l l a t i o n - Warning33Do not install the PDP wherewater (rain) drops can enterthe enclosure, or wherethere is oil or humidity. ・It ma y cause an elect ricshock, a fire, failure or trans-formation.Do not use or keep it in aplace where combustiblesprays or inflammablematerials are kept. ・It may cause an explosion ora fire.Do not install in poorly ventilat-ed locations such as bookcas-es or closets. ・It may cause a fire due to high tem-perature. Do not place the electric cordor the plug near an electrich e a t e r .・The coating on the electric cordsand the plug may melt and cause afire or an electric shock.Do not put candles, mosquitoincense, ci garette lighters, aheater, or any other source ofheat on or near the PDP. ・It may cause a fire.The PDP should be installed asmall distance away from wallsor other solid objects in orderto maintain ventilation and toprevent heat damage.Blockage of the ventilatior withtable cover s or curtains cancause a fir e due to theincreased temperature insidethe monitor.Be sure to install the monitoron a level surface.W a r n i ng : Serious injury or fatal injury may occur, if the indicated warning is not followed.C a u t i on : Minor injury or product damage may occur, if the indicated caution is not followed.Do not place any liquid andforeign objects on or abovethe PDP. ・It may cause an electric shockand a fire. Contact your dealerfor service.Do not install the PDP in anunstable location w ith asmaller support area thanthe PDP. It may fall andcause injury. ・It should be installed on a flat,stable location.
Usage and Maintenance - CautionUsage and Maintenance - W a r n i n g4・Safety precautionsDo not insert any foreignobjects such as wires anddrills into the PDP ventilationslots or the A/V terminal. ・It may cause an electric shock or a fire.Do not allow children toplay with the PDP. ・It may falls or flip over and may cause serious injury. Never attempt to disas-semble, repair or modifythe PDP. ・It may cause an electricshock or a fire. If it requiresrepair, contact your dealer.During a thunderstorm,unplug the power cordand ne ver touch theantenna cable.・I t can cause a n elect ricshock or a fire.Unplug the PDP if you donot intend to use it for along time. The generationof heat, insulation degrada-tion or the accumulation ofdust may cause an electricf i r e .When removing the batter-ies in the remote control,please place the batteriesin a location out of chil-dren's reach . It must bedisposed properly.The plugs and connectorsmust be free of dust orwater before use. It maycause an electric shock ora fire. When transporting the PDP,at least two people should carry it. If it is dropped, seri-ous injury may occur.To clean the interior of thePDP, contact your dealer forservice. A fire or failure mayoccur, if it is not cleaned.When moving the PDP, turn offthe power switch and unplug thepower cord from the outlet. Makesure that the external connectioncords are unplugged (such asantenna cable and input cables)prior to moving. ・The electrical cords may getdamaged and cause an electricshock or a fire. When cleaning the PDP,unplug the electric cordand wipe with a soft anddry cloth. Never clean withchemicals such as industri-al glaze, wax, benzene,alcohol, thinner, aromatic,lubricant, detergent, or adamp cloth.If the PDP is emitting smokeor an unusual smell, immedi-ately turn off the power andunplug the power cord. ・It may cause an electric shockor a fire. Contact your dealerfor the service.
5Considerations for UsageStill image (immovable) screen may cause permanent damage to PDP.1. Lengthy display of still images from video games, banners, graphics and others may fatally damagethe screen.2. When using Picture-In-Picture, permanent damage may occur if the sub-image screen stays on thecorner of screen for a long time.3. When using the PDP in 4 : 3 formats with sidebars for a long period of time, it may cause damageto the plasma panel. It is recommended that you use 16:9 or Panorama format. (Image burn-in canbe avoided by using "Panel Protection" function or a screen-saver. However, once image burn-inoccurs, it may not disappear completely. An image will be dimmed as the image is displayed longtime or repeatedly.)※Any damage to the PDP caused by improper usage (such as image burn-in) shall not be coveredby the warranty.Defective pixels that can be seen on PDP screen.(illuminated spots, bright spots, scotoma , blind spot, blinking)Generally, PDP consists of about 1.22 million pixels and having defective pixels is possible. A PDPwith a number of defective pixels below a certain number is not considered defective. The limitednumber of defective pixels does not affect the performance or reliability of the PDP. The standard ofinspection regarding defective pixels is the same or better as the competitor's offering on similar PDP.It is not subject to replacement or a refund. We will do our best to minimize the defective pixel as bestas we can.
6・Contents●Safety precautions- Power Supply………………………………………………………………2- Installation…………………………………………………………………… 3- Usage and Maintenance………………………………………………… 4・Considerations for Usage…………………………………………………5・Contents…………………………………………………………………6 ~ 7●User Guidance Information・Names of each part…………………………………………………… 8 ~ 9・Options………………………………………………………………………1 0・Accessories………………………………………………………………… 1 1・Installing the PDP- Installing on a wall…………………………………………………………1 2- Installing on a desktop……………………………………………………1 3・Remote controller- Functions of remote controller buttons………………………………1 4- Inserting batteries into remote controller………………………………1 5●Connection・VCR/ Connecting to the Cable TV ……………………………………1 6・Connecting to the Camcorder/ Video game console…………………1 7・Connecting to the DVD player …………………………………………1 8・Connecting to the PC………………………………………………………1 9●Basic Use・Powering the PDP…………………………………………………………2 0・Basic Control ………………………………………………………………2 1・Selecting/External Input…………………………………………………2 2・Using the Menu……………………………………………………………2 2
7●Application・Changing Picture Settings…………………………………………………2 3・Changing Sound Setting…………………………………………………2 4・Selecting the Menu Language……………………………………………2 5・Setting OSD Tone Menu Background…………………………………2 5・Setting Blue Background…………………………………………………2 6・Changing Screen Size……………………………………………………2 7・Viewing Picture in Picture ……………………………………………2󰚟8~ 3 0・Auto Volume Level ………………………………………………………3 1・Stereo Settings ……………………………………………………………3 1・Resetting PDP Settings……………………………………………………3 2・Setting Digital Noise Reduction…………………………………………3 3・Panel Safety………………………………………………………………3 3・Setting Time…………………………………………………………………3 4・Automatic Power on/off …………………………………………………3 5●Monitor・Using PDP as a Monitor…………………………………………………3 6・Adjusting PC Screen………………………………………………………3 6・Adjusting Colour Tone ……………………………………………………3 9●External adjustment・External adjustment ………………………………………………………3 8・Set ID ………………………………………………………………………3 9・Special features……………………………………………………………4 0・Special features………………………………………………………4 1 ~ 4 2●Maintenance and Service Part・Trouble shooting ………………………………………………………4 8 ~ 5 3・Supported Display Modes ………………………………………………5 4
8・Names of each partFront View①Main Power Button- Please turn off the main power switch, if the PDP will not be usedfor a long period of time.②Input Button③Menu key④Down/Up ▼,󰚟▲Button⑤Volume ◀,󰚟▶Button⑥Standby②④ ⑤ ⑥③①
9Back View⑦Composite Input Terminal⑧S-Video Terminal ⑨RS-232C Terminal⑩External Speaker Connection Termonal (8Ω)⑪AC Input①PC Input Terminal ②DVI Input Terminall③Component 1 Terminal④Component 2 Terminal⑤Audio Input Terminal (Comp.1, Comp.2, PC)⑥Audio Input Terminal (Composite, S-Video)① ⑪③⑦ ⑧ ⑨⑤④⑥②⑩
1 0・Options・AccessoriesOptions※To improve the quality of the PDP, specification is subject to change without notice. Pleasecontact your dealer for current options available.Adjustable - Angle Wall mountCeiling - M o u n tB r a c k e tDesktop StandS p e a k e r
1 1AccessoriesRemote ControllerUser's Manual Battery 1.5V( AAA×2) ※The configuration of the components may look different from the following illustration.Power CordRGB Cable
1 2・Installing the PDPThings to considerInstalling on the wall▶You can install PDP in wall-mounted style as shown in the figure above.※Contact your dealer to purchase the "Adjustable-angle wall mount" required for wall-mounted installation.(Usage of wall-mount)A・Please secure enough space for safe use. (Please refer to A and B.)・Installation of the PDP in an improperly ventilated location can cause a fire or damage to thePDP due to increased temperature.
1 3Installing on a desktopThings to consider▶You can install PDP in a desktop style as shown in the figure above.※Please contact your dealer to purchase the "speakers".B・Do not install on an unstable location with support area smaller than the PDP.・Please refer to the desktop stand user's manual for details of installation.(Usage of stand)・This is not floor-standing unit.
1 4・Remote controller※Functions of remote controller buttonsThe remote controller is using Infra-Red (IR). Point it towards the front of the PDP. The remote controller may notwork correctly if it is operated out of range or out of angle.MUTE : SOUND MUTE KEYPOWER : POWER ON/OFF KEYSLEEP : SLEEP TIMER KEYAUTO : PC INPUT SIGNAL ADJSTILL : FREEZE KEKEYCOMPOSITE : COMPOSITE INPUT SELECT KEYS-VIDEO : S-VIDEO INPUT SELECT KEYCOMPONENT : COMPONENT1,2 INPUT SELECT KEYPC : PC INPUT SELECT KEYDVI : DVI INPUT SELECT KEYDISPLAY : INFORMATION DISPLAY KEYP.SIZE : PIP SIZE SELECT KEYSWAP : PICTURE SWAP KEYS.SELECT : SOUND SWAP KEYPIP : PIP ON/OFF CONTROL KEYP.INPUT : PIP INPUT SOURCE SELECT KEYP.POSITION : PIP POSITION SELECT KEYUP/ DOWN (▲,▼) : MENU CONTROL KEYVOL (◀,▶) : VOLUME +/- OR MENU CONTROL KEYENTER : SAVE THE VALUEMENU : OSD MENU DISPLAY KEYSOURCE : MAIN INPUT SOURCE SELECT KEY ARC : ASPECT RATIO CONTROL KEYSSM : SOUND STATUS MODE KEYPSM : PICTURE STATUS MODE KEY
1 5If remote controller does not work1. Check the polarity (+,-) of the batteries in the remote controller.2. Check that the batteries have power.3. Check that the PDP is powered and that it is properly plugged in.4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the PDP.How to use remote controllerInserting batteries into remote controller1. Firmly press the ▼part on the cover and slide the cover in the direction indicated by the arrow.2. Insert the batteries, making sure thatthe polarities are correct.3. Close the cover.CAUTION : Risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the national code (Recycling program).・The remote controller should be operated within 30feet(7m) and 30˚to the left and the right ofthe IR receiver on the front of the PDP.・Used batteries should be disposed properly.
1 6・VCR / Connecting to the Cable TV・Connecting to the Camcorder/ Video game consoleHow to watch VCR on the PDPVCR / Connecting to the Cable TV1. Turn on the PDP monitor and press on the remote controller.2. Use to move to "COMPOSITE".・If S-Video has been connected, select S-Video.3. VCR : Turn on the VCR, insert the tape and press play button.Cable TV : Turn on the cable broadcasting receive and select the channel you wish to view.※Cable TV :In order to watch CableTV, Subscribe to your local CableTV company and install a separateconverter(Set-Top-Box) ※C onne ct ion terminals of o therappliances differ by manufactureand model.・Connect the PDP's Composite Interminal to the VCR/ cable b r o a d-casting receiver’s Composite Out ter-minal using the Composite cable.(Make sure the colour of the termi-nals and the colour of the cableare the same)※Use the S-Video cable for higher picture quality.Composite CableS-Video Cable( R ) ( L )( R ) ( L )●Connecting to the composite terminal●Connecting to the S-Video terminal< VIDEO >< VIDEO ><Back view of the monitor ><Back view of the monitor >
1 7Connecting to the Camcorder/ Video game consoleComposite CableS-Video Cable( R ) ( L )( R ) ( L )●Connecting to the composite terminal●Connecting to the S-Video terminal< Cable broadcasting receiver >< Cable broadcasting receiver ><Back view of the monitor ><Back view of the monitor >※Connection terminals of otherappliances differ by manufac-ture and model.・Connect the PDP's Composite In terminal to the camcorder/game console's Composite Outterminal with the Compositecable. (Make sure the colour ofthe terminals and the colour of cable are the same)※S-Video cable can be used ifthere is an S-Video terminal. How to watch1. Turn on the PDP and press on the remote controller.2. Use to move to "COMPOSITE".・If S-Video has been connected, select S-Video. 3. Turn on the camcorder or video game and set to video mode. (Please refer to the user's manual of camcorder/video game for more information.)4. Insert tape into camcorder and press Play button or insert disc into the video game console.
1 8How to watch DVD1. Turn on the PDP monitor and press on the remote controller.2. Use to move to "Component1".・If S-Video has been connected, select S-Video3. Turn on DVD player and press Play button.・Connecting to the Camcorder/ Video game console・Connecting to the DTV receiver Connecting to the Camcorder/ Video game console※Connection terminals of other appliances differ by manufact-ture and model.1. Connect PDP's Y, PB, PRter-minal in component 1 to DVD'sVideo Out terminal using theexternal cable.2. Connect PDP's Audio termi-nals (left & right) in component 1to DVD's Audio Out terminalusing the Audio cable.※S-Video cable can be used if there is an S-Video terminal. <Back view of the monitor ><Back view of the monitor >Component connection cableS-Video Cable●Connecting to the composite terminal●Connecting to the S-Video terminal< DVD >< DVD >( R ) ( L )PRPBY( R ) ( L )Component Audio cable
How to Use as PC Monitor1. Turn on the PDP monitor and press on the remote controller.2. Use to move to "PC".3. Set the PC video output mode to VGA (640×480)/ SVGA (800×600)/ XGA (1024×7 6 8 ) / S X G A( 1 0 2 8×1024). In the mode higher than SXGA (1028×1024) "Out of Range" message appears. Be sureto change your PC video format to less than SXGA mode. 1 9Connecting to the PC< PDP Back view >・Connect PDP's RGB terminal to PC's RGB terminal using the D-Sub cable.・Connect PDP's PC Audio terminal to PC's Audio terminal using the Audio cable.(Only possible for PC's with Audio terminal)※Connection terminals of other appliances differ by manufacture and model.< PC >
2 0・Powering the PDP・Basic ControlPrior to using the PDP Insert the power plug.Connect external equipment properly. ・Please use only after carefully reading this manual. ・Check the power connection to the AC outlet and the connection of AC input to the PDP.Power On/ Off・To turn the PDP on :Press the "Main Power" button of PDP and then press the "Standby" button.・To turn the PDP off :Press "Standby" button on the PDP and then press the "Main Power" button.Turning the main power switch off will save energy. It is the same as unplugging the power cord.If ON Time setting is set, the main power should be ON. ・To turn on/off by remote controller :Press the POWER button of remote controller (If the PDP is not turned on, check that the "Main Power" button on the PDP main body is turned on. The main power indicator will light up red if turned on).CAUTION - After turning off the main Power, please wait at least more than 3 seconds to turn themain power back on.
increases the volume.decreases the volume.2 1●INFO - To check the current state ●To turn off only sound●Volume ControlUse the mute function to turn off the PDP sound for a while, when a phone or a bell rings.●STILL-To view the still picturePress button again to hear the sound again.Press .Press button or wait 10 seconds for the display to disappear.Display shows user's setting and selections.Basic ControlPress .Picture will freeze, but sound will continue to be heard. Press again to cancel.
Use to move to the desired item. Press to select. 2 2・Selecting/External Input ・Using the Menu・Changing Picture Settings※You can connect Composite, S-Video, Component 1, Component 2, DVI and PC and enjoy thesefunctions.※All input sources will be automatically detected and displayed on screen, but you may select an activated source when the input cable is connected only.Press .You can select the input signal of other appliances connected to the PDP.Use this function to switch to the input source you wish to view.Selecting/External InputUsing the MenuUse (left, right arrows) to move the cursor to the desired function.Press to get into the sub menu. Press to select. Press . The menu screen will appear.Press to go back to the previous menu.
2 3Changing Picture SettingsUse to move to . Press to move to "Custom Adjust". Press to select. Press .Use to move to the desired category.Use to adjust the setting.Use select between Brightness/ Contrast/ Colour/Tint/ Sharpness.Press to go back to the previous menu. ●Custom Picture Adjustment>>󰚟Custom Mode >󰚟>・Brightness : It adjusts the brightness of the image.・Contrast : It adjusts the contrast of image.・Colour : It adjusts the intensity of the colour.・Tint : It adjusts the natural tint of the image.・Sharpness : It adjusts the clarity of the image.・Custom : Select to set user's preferences.・Dynamic : Select when using the PDP in a brightly lit environment.・Standard : It is the best screen setting (factory setting).・Movie : Select when watching a movie. ・Mild : Select when using the PDP in a dimly lit environment.Press the mode buttons on the shown on the screen repeatedly to adjust the settings.CustomDynamicStandardMovieMildPress .
Use to move to . Press to move to "Custom Adjust". Press to select. Press .Use to move to the desired category.Use to adjust the setting.Press to go back to the previous menu. 2 4・Changing Sound Settings・Selecting the Menu Language ・Setting OSD Tone Menu BackgroundChanging Sound Settings>>󰚟Custom Mode >󰚟>・Volume : It adjusts the sound volume.・Balance : It adjusts the volume of speakers on the left and the right. ・Equalizer : It adjusts the volume by frequency bands and the user canselect the desired sound quality.・Standard : It is the flat sound setting with no equalizer effect at all.・Music : It is preset for music listening.・Movie : It is preset sound for watching a movie.・Speech : It is preset for hearing vocal audio clearly.・Custom : Select when listening to the sound to user's preference.Press the mode buttons on the shown on the screen repeatedly to adjust the settings.CustomStandard MusicMovieSpeechPress . ●Custom Sound Adjustment
2 5Selecting the Menu LanguageSetting OSD Tone Menu BackgroundMenu screen can be viewed in the language preferred by the user.Use to move to . Press to move to "Language". Press to select. Press .Use to select the desired language.Press to go back to the previous menu. Use to move to . Press to move to "OSD Tone". Press to select. Press .Use to select the "ON".Press to go back to the previous menu.
2 6・Setting Blue Background ・Changing Screen Size Setting Blue Background The PDP can be set to display blue screen when no signal from other connected appliances arebeing received. If there is an incoming signal, the blue screen will be replaced by the normal picture screen.Use to move to . Press to move to "Blue Screen". Press to select. Press .Use to select the "On".Press to go back to the previous menu.

Navigation menu