E RAE Electronics Industry Co EPT-4210 PDP TV/Monitor User Manual 42 NTSC MANUAL 0130

Download:
Mirror Download [FCC.gov]
Document ID	405274
Application ID	gGWSMKG+YI3As562PB7ArQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	270.49kB (3381141 bits)
Date Submitted	2004-03-16 00:00:00
Date Available	2004-03-16 00:00:00
Creation Date	2004-01-31 11:04:56
Producing Software	[ClibPDF Library 2.02-r1-1] PrintToPDF 2.2.1
Document Lastmod	2004-02-18 10:59:07
Document Title	42" NTSC MANUAL(0130).pdf
Document Creator	QuarkXPressâ„¢ 4.1K
Document Author:	¿Ã ¿¸¿⁄

Sample Test product
42˝ PDP TV User's Guide
Please observe all safety precautions
when using this product.
Please read this manual carefully before
using this product.
Supports HDCP
CONTENTS
l Quick and Easy Installation
l Versatility and Expendability
l That doesn’t make you feel fatigue on your Eyes.
l Flat-Panel Digital Display easy on the Eyes.
Important Safety Instructions
Important safeguards for you and your new product ………………………………………………………………… 4
Note to Cable/TV Installer ………………………………………………………………………………………………… 6
Warning ………………………………………………………………………………………………………………………… 6
Regulatory Information ………………………………………………………………………………………………………6
Considerations For Usage …………………………………………………………………………………………………7
User Guidance Information
Name of each part …………………………………………………………………………………………………………… 8
Controls and Functions……………………………………………………………………………………………………… 9
Mounting on a Desktop …………………………………………………………………………………………………… 10
Installation Precautions …………………………………………………………………………………………………… 10
Installing an Antenna ……………………………………………………………………………………………………… 11
Remote controller …………………………………………………………………………………………………………… 12
Precautions ………………………………………………………………………………………………………………… 13
Connection
VCR Connections …………………………………………………………………………………………………………… 14
Cable TV Connections …………………………………………………………………………………………………… 15
Camcorder/ Game Console Connections …………………………………………………………………………… 16
DVD Connections …………………………………………………………………………………………………………… 17
DTV Connections …………………………………………………………………………………………………………… 18
PC Connections …………………………………………………………………………………………………………… 19
Basic Use
Powering the PDP TV ……………………………………………………………………………………………………… 20
Initial Settings………………………………………………………………………………………………………………… 20
Watching TV ………………………………………………………………………………………………………………… 21
Memorizing the channels …………………………………………………………………………………………… 22~23
Selecting input source …………………………………………………………………………………………………… 23
Changing Picture Settings………………………………………………………………………………………………… 24
Changing Sound Settings ………………………………………………………………………………………………… 25
Selecting the Menu Language…………………………………………………………………………………………… 26
Setting OSD Tone Menu Background ………………………………………………………………………………… 26
Setting Blue Background ………………………………………………………………………………………………… 27
CONTENTS
Application
Changing Screen Size ……………………………………………………………………………………………………… 28
Adjusting Unclear Screen …………………………………………………………………………………………………… 29
LNA (Low Noise Amplifier) ………………………………………………………………………………………………… 29
Using the V-Chip ………………………………………………………………………………………………………… 30~32
Viewing the Closed Captions ……………………………………………………………………………………………… 33
Viewing Picture in Picture ……………………………………………………………………………………………… 34~35
Auto Volume Level …………………………………………………………………………………………………………… 36
Listening to Stereo Sound / MTS(Multi Television Sound) ………………………………………………………… 36
Resetting PDP TV Settings / Panel Protection ………………………………………………………………………… 37
Setting Time …………………………………………………………………………………………………………………… 38
Automatic Power On/ Off …………………………………………………………………………………………………… 39
Monitor
Using TV as a Monitor ……………………………………………………………………………………………………… 40
Adjusting PC Screen ………………………………………………………………………………………………………… 40
Adjusting Color Tone ………………………………………………………………………………………………………… 41
External adjustment
External adjustment ………………………………………………………………………………………………………… 42
Set ID …………………………………………………………………………………………………………………………… 43
Special features ……………………………………………………………………………………………………………… 44
RS232C Communication Protocol …………………………………………………………………………………… 45~49
Maintenance and Service
Trouble shooting ……………………………………………………………………………………………………………… 50
Trouble shooting Tip ………………………………………………………………………………………………………… 51
Supported Display Modes …………………………………………………………………………………………………… 52
Important Safety Instructions
Important Safety Instructions
● Important safeguards for you and your new product
Always be careful when using your LCD TV. To reduce the risk of fire, electrical shock, and
other injuries, keep these safety precautions in mind when installing, using, and maintaining
your machine.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use the attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
Important Safety Instructions
Important Safety Instructions
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
• Appar atus sha ll no t be exp osed to dri pping or splashi ng and n o obje cts fille d wi th
liq uids, such as vase s, shall b e placed on the ap paratus
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK , DO NOT RE MOVE COVER
(OR B ACK). NO USER S ERVICEABLE PARTS
I NSIDE. REFER SERV ICING TO QUALIFIED
S ERVICE PERSONNEL.
This symbol indicates high voltage
is present inside. It is dangerous
to make any kind of contact with
any inside part of this product.
This s ymbol alerts you that
important literature c onceming
operation and maintenance has
been included with this product.
NOTE TO CABLE/TV INSTALLER :
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
WARNING
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Important Safety Instructions
Important Safety Instructions
Caution :
- These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so.
- Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Important :
One Federal Court has held that unauthorized recording of copyrighted TV programs is an
infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or
in part may be in violation of these rights.
REGULATORY INFORMATION :
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a residential i nstall ation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
eq uipment d oes cause harmful interfere nce to radi o o r tel evi si on reception , wh ich can be
determined by turni ng the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Safety Precautions
Considerations For Usage
Still image (immovable) screen may cause permanent damage to
PDP TV.
1. Lengthy display of still images from video games, banners, graphics and others may fatally damage
the screen.
2. When using Picture-In-Picture, permanent damage may occur if the sub-image screen stays on the
corner of screen for a long time.
3. When using the PDP TV in 4 : 3 formats with sidebars for a long period of time, it may cause
damage to the plasma panel. It is recommended that you use Wide(16 :9) or Panorama format.
(Image burn-in can be avoided by using "Panel Protection" function or a screen-saver. However,
once image burn-in occurs, it may not disappear completely. An image will be dimmed as the image
is displayed long time or repeatedly.)
※ Any damage to the PDP TV caused by improper usage (such as image burn-in) shall not be covered
by the warranty.
Defective pixels that can be seen on PDP TV screen.
(illuminated spots, bright spots, scotoma , blind spot, blinking)
Generally, PDP TV consists of about 1.22 million pixels and having defective pixels is possible. A PDP
TV with a number of defective pixels below a certain number is not considered defective. The limited
number of defective pixels does not affect the performance or reliability of the PDP TV. The standard of
inspection regarding defective pixels is the same or better as the competitor's offering on similar PDP
TV. It is not subject to replacement or a refund. We will do our best to minimize the defective pixel as
best as we can.
User Guidance Information
Names of each part
Front View
Program(CHANNEL) ▼, ▲ Button
Main Power Button
- Please turn off the main power switch, if the PDP TV will not be
used for a long period of time.
Volume ◀, ▶ Button
Standby Button
Input Selection Button
Menu Button
Options
● To improve the quality of the PDP TV, specification is subject to change without notice. Please contact your dealer for
current options available.
Speaker
Stand
Ceiling - Mount Bracket
Adjustable - Angle
Wall mount
User Guidance Information
Controls and Functions
Back View
External Speaker Connection Terminal (8Ω)
DVI-D Input Terminal
AV (Video/Audio) Input
EAR PHONE Input Terminal
Component 1 (DVD) Input Terminal (480i~1080i)
S-Video Input Terminal
Component 2 (DTV) Input Terminal (480i~1080i)
RS-232C Terminal
Audio Input Terminal (DVD, DTV, PC)
Antenna (RF) Input Terminal
RGB PC Input Terminal (VGA~XGA)
AC Input Terminal
Accessories
● The conf iguration of the components may look different from the following illust ration.
User's Guide
Antenna Cable
Power Cord
User's Guide
Remote
Control
Battery 1.5V (AAA×2)
User Guidance Information
Mounting on a Desktop
● Your PDP TV can be mounted on a Desktop as shown in the figure above.
● This is not floor-standing unit.
Installation Precautions
Wall Mounting
● Please secure enough space for safe use. (Please refer to A and B.)
● Installation of the PDP TV in an improperly ventilated location can cause a fire or damage to the PDP TV
due to increased temperature.
(Mounting on a wall)
※ Contact your dealer to purchase the "Adjustable-angle wall mount" required for wall-mounted installation.
Using the Stand
● Do not install on an unstable location with support area smaller than the PDP TV.
● Please refer to the desktop stand user's manual for details of installation.
(Using the Stand)
※ Please contact your dealer to purchase the "speakers".
10
User Guidance Information
Installing an Antenna
Wall Jack with
F-Connector
Coaxial (Round) Antenna Cable
Connecting an Outdoor Antenna
For the best reception, we recommend you use an outdoor antenna.
Severely weathered antennas and antenna cables can reduce the signal quality.
Before making any connections, inspect all antenna hardware. Any service center can explain the various
outdoor antennas available to you.
● 300 Ohm Flat Wire
Connect the 300 ohm flat wire to the screws on the 300 ohm to 75 ohm adapter. Push the end of 300 ohm to 75 ohm
adapter onto the 75 ohm antenna jack.
300 ohm Flat Wire
300 to 75
ohm Adapter
● 75 Ohm Coaxial Cable
Connect the 75 ohm coaxial cable directly to the 75 ohm antenna jack.
11
User Guidance Information
Remote Controller
●Functions of remote control buttons
The remote control is using Infra-Red (IR). Point it towards the front of the PDP TV. The remote control may not
work correctly if it is operated out of range or out of angle.
1. POWER : TURNS THE TV ON AND OFF(page.20)
2. SOURCE : USE TO SELECT AN INPUT SOURCE (page.23)
3. MUTE : PRESS TO TEMPORARILY TURN OFF THE SOUND (page.21)
4. SLEEP : PRESS TO SELECT A TIME FOR THE TV TO TURN OFF
AUTOMATICALLY (page.39)
5. STILL : PRESS TO STOP THE ACTION DURING A PARTICULAR
SCENE (page.21)
6. ARC (Aspect Ratio Control) : PRESS TO CHANGE THE
SCREEN SIZE (page.28)
7. MTS (Multi-Television Sound) : PRESS TO SELECT MONO
OR STEREO MODE (page.36)
8. ADD/ ERASE : PRESS TO ADD OR ERASE CHANNELS
IN THE TV'S MEMORY (page.23)
9. PSM : PICTURE STATUS MEMORY KEY (page.24)
(CUSTOM, DYNAMIC, STANDARD, MOVIE, MILD)
10. SSM : SOUND STATUS MEMORY KEY (page.25)
(CUSTOM, STANDARD, MUSIC, MOVIE, SPEECH)
11. +100 : PRESS TO SELECT CHANNELS OVER 100.
FOR EXAMPLE, TO SELECT CHANNEL 107,
PRESS"+100" THEN PRESS "0" AND "7"
12. LAST : TUNES TO THE PREVIOUS CHANNEL (page.21)
◈PIP CONTROL KEY (page.34~35)
13. PIP : PIP ON/OFF
14. P.INPUT : PIP INPUT SELECT KEY
15. P.POSITION : PIP POSITION CONTROL KEY
16. P.SIZE : PIP AND PBP MODE CHANGE
17. SWAP : PIP SOURCE SWAP
18. S.SELECT : MAIN OR SUB SOUND SELECT KEY
19. AUTO/ LNA : PC MODE : AUTO IN PROGRESS KEY (Press to
Control the Monitor screen automatically)
TV MODE : LNA KEY(Low Noise Amplifier) (page.29)
20. C /C : CLOSED CAPTION (page.33)
21. MENU/EXIT : ON-SCREEN MENU ON/OFF KEY
22. INFO : PRESS TO DISPLAY THE CURRENT CHANNEL
AND AUDIO/ VIDEO SETTINGS (page.21)
23. ▲,▼ (CH+, CH-) : PRESS TO CHANGE THE MEMORIZED
CHANNELS OR MENU CONTROL KEY
24. ◀,▶ (VOL+, VOL-) : PRESS TO INCREASE OR DECREASE
THE VOLUME OR MENU CONTROL KEY
25. ENTER : SAVE THE VALUE
26. CH.M-, CH.M+ : PRESS TO CHANGE THE ONE BY ONE
CHANNEL
12
User Guidance Information
Precautions
Avoiding Remote Control Problems
1. Check the polarity (+,-) of the batteries in the remote controller.
2. Check that the batteries have power.
3. Check that the PDP TV is powered and that it is properly plugged in.
4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the PDP TV.
Inserting Batteries in the Remote Controller
1. Open the cover out Completely.
2. Insert the two supplied batteries (AAA, 1.5V). Ensure
that the polarities ( + and -) of the batteries are aligned
correctly.
3. Replace the cover.
CAUTION : Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the national code (Recycling program).
How to use remote controller
・The remote control should be operated within 30 feet(7m) and 3 0˚to the left and the right of the IR receiver
on the front of the PDP TV.
・ Used batteries should be disposed properly.
13
Connection
VCR Connections
● Connecting to the AV terminal
※ Connection terminals of other appliances differ by manufacturer and model.
< VIDEO >
(R) (L)
< PDP TV Back view >
AV Cable
・Connect the PDP TV's AV In terminal to the VCR's AV Out terminal using the AV cable.
(Make sure the color of the terminals and the color of the cable are the same)
● Connecting to the S-Video terminal
< VIDEO >
(R) (L)
< PDP TV Back view >
S-Video Cable
※ Use the S-Video cable for higher picture quality.
Playing the VCR
1. Turn on the PDP TV and press
2. Use
on the remote controller.
to move to "AV".
・If S-Video has been connected, select S-Video.
3. Turn on the VCR, insert the tape and press play button.
14
Connection
Cable TV Connections
● Connecting to the AV terminal
※ In order to watch Cable TV, Subscribe to your local Cable TV company and install a separate converter(Set-Top-Box)
※ Connection terminals of other appliances differ by manufacturer and model.
< Cable broadcasting receiver >
(R) (L)
< PDP TV Back view >
AV Cable
・Connect the PDP TV's AV In terminal to the cable broadcasting receiver AV Out terminal using the AV cable. (Make
sure the color of the terminals and the color of cable are the same)
● Connecting to S-Video terminal
< Cable broadcasting receiver >
(R) (L)
< PDP TV Back view >
S-Vi deo Ca ble
※ Use the S-Video cable for higher picture quality.
Viewing Cable TV
1. Turn on the PDP TV and press
2. Use
on the remote controller.
to move to "AV".
・If S-Video has been connected, select S-Video.
3. Turn on the cable broadcasting receiver and select the channel you wish to view.
15
Connection
Camcorder/Game Console Connections
● Connecting to the AV terminal
※ Connection terminals of other appliances differ by manufacturer and model.
< Camcorder/ Game machine >
(R) (L)
< PDP TV Back view >
AV Cable
・Connect the PDP TV's AV In terminal to the camcorder/game console's AV Out terminal with the AV cable. (Make
sure the color of the terminals and the color of cable are the same)
● Connecting to S-Video terminal
< Camcorder/ Game machine >
(R) (L)
< PDP TV Back view >
S-Video Cable
※ S-Video cable can be used if there is an S-Video terminal.
Using Camcorder/Game Console
1. Turn on the PDP TV and press
2. Use
on the remote controller.
to move to "AV".
・ If S-Video has been connected, select S-Video.
3. Turn on the Camcorder or video game and set to Video mode.
(Please refer to the User's manual of Camcorder/ Video game for more information)
4. Insert tape into Camcorder and press play button or insert disc into the Video game console.
16
Connection
DVD Connections
● Connecting to the component terminal
※ Connection terminals of other appliances differ by manufacturer and model.
< DVD >
PB P R
(R) (L)
< PDP TV Back view >
Component Audio cable
Component connection cable
1. Connect PDP TV's Y, P B, PR terminal in Component 1 to DVD's Video Out terminal using the external cable.
2. Connect PDP TV's Audio terminals (left & right) in Component 1 to DVD's Audio Out terminal using the Audio cable.
● Connecting to the S-Video terminal
< DVD >
P B PR
(R)
(L)
(R)
(L)
< PDP TV Back view >
S-Video Cable
※ S-Video cable can be used if there is an S-Video terminal.
● Connecting to the DVI-D terminal
< DVD >
< PDP TV Back view >
P B PR
DVI-D Cable
※ Use the DVI-D with HDCP connection if there is a DVI-D terminal in your DVD.
Playing the DVD
1. Turn on the PDP TV and press
2. Use
on the remote controller.
to move to "Component1".
・If S-Video has been connected, select S-Video.
・If DVI-D has been connected, select “DVI”
3. Turn on the DVD, insert the DVD and press Play button.
17
Connection
DTV Connections
● Connecting to the component terminal
※ Connection terminals of other appliances differ by manufacturer and model.
< DTV receiver>
Y PB PR
< PDP TV Back view >
(R) (L)
Component Connection Cable
Component Audio Cable
1. Connect PDP TV's Y, P B, PR terminal in Component 2 to DTV receiver's Video Out terminal using the external cable.
2. Connect PDP TV's Audio terminals (left & right) in Component 2 to DTV receiver's Audio Out terminal using
the Audio cable.
※ DTV receiver's output terminal can be marked Y, PB, PR or Y, CB, C R according to products.
● Connecting to the PC/DVI terminal
< DTV receiver>
< PDP TV Back view >
PB PR
(R) (L)
DVI-D Cable
Analog RGB(D-Sub 15 pin) Cable
PC Audio Cable
・ Some of DTV receiver(Set-Top-Box) have an PC Connector (D-Sub 15pin), DVI connector instead of Component output .
・ Connect Audio Cable from the Audio output terminal of receiver to the PC Audio input terminal of the PDP TV.
※ Use the DVI-D with HDCP connection for higher picture quality if there is a DVI-D terminal.
Viewing DTV
1. Turn on the PDP TV and press
2. Use
on the remote controller.
to move to "Component2".
・If D-Sub 15 Pin has been connected, select PC.
・If DVI-D has been connected, select DVI.
3. Turn on the DTV receiver and select the channel that you want.
18
Connection
PC Connections
※ Connection terminals of other appliances differ by manufacturer and model.
< PC >
< PDP TV Back view >
DVI-D Cable
Analog RGB(D-Sub 15 pin) Cable
PC Audio Cable
・Connect PDP TV's PC INPUT terminal to PC's RGB terminal using the D-Sub cable.
・If there is a DVI-D terminal in your PC, use the DVI-D cable connection.
・Connect PDP TV's PC Audio terminal to PC's Audio terminal using the Audio cable.
(Only possible for PC's with Audio terminal)
How to Use as PC
1. Turn on the PDP TV and press
2. Use
on the remote controller.
to move to "PC".
If DVI-D has been connected, select “DVI”
3. Set the PC video output mode to VGA (640× 480)/ SVGA (800×600)/ XGA (1024×768).
In the mode higher than XGA (1024×768) "Out of Range" message appears.
Be sure to change your PC video format to less than SXGA mode.
※ What are some important advantages of the DVI Interface with HDCP over existing analog interfaces
such as composite, s-video, or component video interface?
1. DVI with HDCP content protection provides a protected interface which may improve the availability of high value
content such as premium high-definition video.
2. DVI supports up to 24-bit digital RGB data for each pixel for the highest image quality
3. For digital display technologies such as LCD, plasma and DLP based dis plays, DVI enables an all-digital
rendering of video without the losses associated with an analog interface.
4. DVI adds the quality and functionality of a di gital interface w hile maintaining the simplicity of s upporting
uncompressed video formats.
19
Basic Use
Powering the PDP TV
● Power on/ off
・To turn the PDP TV on :
Press the "Main Power" button of PDP TV and then press the "Standby" button.
・To turn the PDP TV off :
Press "Standby" button on the PDP TV and then press the "Main Power" button.
Turning the main power switch off will save energy. It is the same as unplugging the power cord.
If ON Time setting is set, the main power should be ON.
・To turn on/off by remote controller :
Press the “POWER” button of remote controller (If the PDP TV is not turned on, check that the "Main Power"
button on the PDP TV main body is turned on. The main power indicator will light up red if turned on).
CAUTION - After turning off the main Power, please wait at least more than 3 seconds to turn the main power back on.
Initial Settings
・When the brand new television set it turned on for the first time, following settings can be set using the plug
and play function of the TV.
● Using the menu
Press the “Main Power” button of PDP TV and then press the “Standby” button.
You will see the Tuner Mode selection menu.
Use
to move to the desired "Tuner Mode". (See page. 22)
Press
to select.
Automatically "Auto Search" beginning.
After "Auto Search" ends, select the desired Language.
20
Use
to move to the desired "Language".
Press
to select.
Press
to go back to the previous menu.
Basic Use
Watching TV
● Channel Selection
increases the memory channel.
increases by one channel.
decreases the memory channel.
decreases by one channel.
You will see all the channels that the TV has
memorized.
You will see channels that were either erased or not
memorized.
● To go back to the previous channel
Press
to go back to the channel you were previously viewing.
● To View the still picture
Press
Picture will freeze, but sound will continue to be heard.
Press
again to cancel.
● Volume Control
increases the volume.
decreases the volume.
● To turn off only sound
Use the mute function to turn off the PDP TV sound for a while, when a phone or a bell rings.
Press
button again to hear the sound again.
● To check the current state
Press
button on the remote control.
Display shows user's setting and selections.
Press
button or wait 10 seconds for the display to disappear.
21
Basic Use
Memorizing the Channels
● Selecting the Video signal-source.
Before your television can begin memorizing the available channels, you must specify the type of signal source
that is connected to the TV.
Press
Use
to move to
Press
to select “Tuner Mode”.
Use
to move to the desired signal source.
Press
to go back to the previous menu.
STD, IRC and HRC identify Various types of Cable TV systems.
Contact your local company to identify the type of cable system that exists in your particular area.
・ AIR : Airwaves broadcasting
・ STD : Standard CATV frequency
・ IRC : Incrementally Related Carrier
・ HRC : Harmonically Related Carrier
● Storing Channels in Memory (Automatic Method)
First, Select the correct signal source (AIR, STD, IRC, HRC)
22
Press
Use
to move to
Press
to move to "Auto Search".
Press
to select.
Use
to move to "Start".
Press
to select.
Searching all the channels on each tuner modes
(Air, STD, IRC, HRC) using Auto search.
Press
to go back to the previous menu.
Basic Use
Memorizing the Channels
● Adding and Erasing Channel (Manual Method)
Press
Use
to move to
Press
to move to "Add/ Erase"
Press
to select.
Use
to move to "Add" or "Erase".
Press
to select.
Press
to go back to the previous menu.
Or press
button on the remote control.
Selecting Input Source
You can select between the TV signal and the input signal of other appliances connected to the TV.
Use this function to switch to the input source you wish to view.
Press
Press
button on the remote control.
Use
to move to the desired input source.
Press
to select.
※ Aside from the watching TV, you can connect AV, S-Video1, S-Video2, Component1
Component 2, and PC to the TV set and enjoy these functions.
※ All input sources will be automatically detected and displayed on screen, but you may select an
activated source when the input cable is connected only.
23
Basic Use
Changing Picture Settings
Press
button on the remote control.
Press the mode buttons on the shown on the screen repeatedly to adjust the settings.
Custom
Dynamic
Standard
・Custom : Select to set user's preferences.
・Dynamic : Select when using the PDP TV in a brightly lit environment.
・Standard : It is the best screen setting (factory setting).
・Movie : Select when watching a movie.
・Mild : Select when using the PDP TV in a dimly lit environment.
● Custom Picture Adjustment
Press
Use
to move to
Press
to select “Custom Adjust”.
Use
to move to the desired category.
Use
to adjust the setting.
Use
select between Brightness/ Contrast/
Color/Tint/ Sharpness.
Press
to go back to the previous menu.
Custom Mode
・Brightness : It adjusts the brightness of the image.
・Contrast : It adjusts the contrast of image.
・Color : It adjusts the intensity of the color.
・Tint : It adjusts the natural tint of the image.
・Sharpness : It adjusts the clarity of the image.
24
Movie
Mild
Basic Use
Changing Sound Settings
Press
button on the remote control.
Press the mode buttons on the shown on the screen repeatedly to adjust the settings.
Custom
Standard
Music
Movie
Speech
・Custom : Select when listening to the sound to user's preference.
・Standard : It is the flat sound setting with no equalizer effect at all.
・Music : It is preset for music listening.
・Movie : It is preset sound for watching a movie.
・Speech : It is preset for hearing vocal audio clearly.
● Custom Sound Adjustment
Press
Use
to move to
Press
to select “Custom Adjust”.
Use
to move to the desired category.
Use
to adjust the setting.
Press
to go back to the previous menu.
Custom Mode
・10KHz, 3KHz, 1KHz,300Hz, 100Hz, : It adjusts the volume by frequency bands and the user can select the desired
sound quality.
・Balance : It adjusts the volume of speakers on the left and the right.
25
Basic Use
Selecting the Menu Language
Menu screen can be viewed in the language preferred by the user.
Press
Use
to move to
Press
to select “Language”.
Use
to select the desired language.
Press
to go back to the previous menu.
Setting OSD Tone Menu Background
26
Press
Use
to move to
Press
to move to "OSD Tone".
Press
to select.
Use
to select the "On".
Press
to go back to the previous menu.
Basic Use
Setting Blue Background
The PDP TV c an be set to display blue screen when no TV signal or signal from other connected
appliances are being received. If there is an incoming signal, the blue screen will be replaced by the
normal picture screen.
Press
Use
to move to
Press
to move to "Blue Screen".
Press
to select.
Use
to select the "On".
Press
to go back to the previous menu.
27
Application
Changing Screen Size
Press
button on the remote control (aspect ratio controller).
Wide
Panorama
Zoom1
Zoom2
4 : 3 (normal)
14 : 9
In PC/DVI input mode, you can only select either the Wide or the 4 : 3 (normal) mode.
In Component 2 input mode, you can't Select 14 : 9.
Wide
14 : 9
Panorama
4:3
Screen Size
・Wide - It makes 16 : 9 format for input signal.
・Panorama - It makes 4 : 3 format fit into 16 : 9 format with minimal loss in content.
・Zoom 1 - It enlarges the natural screen factor by approx. 5 %
・Zoom 2 - It enlarges the natural screen factor by approx. 10 %
・4 : 3 - It is the standard format of broadcasting.
・14 : 9 - It makes 14 : 9 format for input signal.
28
Zoom 1
Zoom 2
Application
Adjusting Unclear Screen
Use screen fine-tune controls to adjust the screen when picture quality is unclear or lines appear.
Press
Use
to move to
Press
to move to "Fine Tune".
Press
to select.
Use
to tune.
Press
to go back to the previous menu.
To return to initial setting, use
to select "Reset" and press
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area. Sometime the LNA function can improve the reception (a low-noise
preamplifier boosts the incoming signal).
Press
button on the remote control.
29
Application
Using the V-Chip
The V-Chip feature automatically locks out programming that is deemed inappropriate for children.
The user must first enter a password before any of the V-Chip restrictions can be set up or changed.
Press
Use
to move to
Press
to move to "V-Chip".
Press
to select.
The "ENTER Password" screen will appear. Enter your 4-digit number.
※ The default password for a new TV set is
After entering a valid password, The "V-Chip" Screen will appear.
● How to Enable/ Disable the V-Chip
Use
to move to "Status"
Press
to select.
Use
to select the "On" or "Off".
Press
to go back to the previous menu.
● Setting up your V-CHIP password
First, Set up a personal identification number(password) and enable the V-Chip.
Use
to move to "Change password"
Press
to select.
The "Edit password" screen will appear.
Press number button to select the "Enter New Password" and
"Confirm New Password" (4-digit).
Press
30
to go back to the previous menu.
Application
Using the V-Chip
● How to set up Restrictions using the "TV guidelines"
First, Set up a personal identification number (password) and enable the V-Chip.
Parental restrictions can be set up using either of two methods ;
The TV guidelines or the MPAA rating.
Use
to move to "TV Parent Guide".
Press
to select.
Use
or
Press
to set the restriction ratings.
Press
to go back to the previous menu.
to move to desired categories.
The V-Chip will automatically block certain categories that are "More restrictive".
For example, if you check "L" Sub-rating in TV-PG, then the "L" Sub-rating in TV-14 and TV-MA will
automatically be checked.
・ TV-Y : Young Children
・ TV-Y7 : Child 7 and over
・TV-G : General audience
・ TV-PG : Parental guidance suggested
・ TV-14 : Parents strongly cautioned
・ TV-MA : Mature audience
(young Children through age 7)
(everybody else)
※ The restrictions for these two groups work independently.
・FV : F antasy Violence
・V : Violence
・S : Sexual situation
・L : Adult Language
・D : Sexual Suggestive Dialog
31
Application
Using the V-Chip
● How to Set up Restrictions using the MPAA Ratings
The MPAA rating system uses the Motion Picture Association of America(MPAA) system, and its main
application is for movies.
When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable
rating (either MPAA or TV-Rating).
First, Set up a personal identification number(password) and enable the V-Chip.
Use
to move to "MPAA"
Press
to select.
Use
to move to desired categories.
Press
to set the restriction ratings.
Press
to go back to the previous menu.
● How to Reset the TV after the V-Chip Blocks a Channel.
If the TV is turned to restricted channel, the V-Chip will block it.
The Screen will go blank and the following message will appear:
To resume normal viewing, press the
key and press your personal identification number (Password).
・G : All Children and General audience.
・PG : Parental guidance suggested
・PG13 : Parental guidance for children under 13
・R : Restricted viewing, parental guidance is suggested for children under17.
・NC17 : No children under age 17
・X : Adults only
・NR : Not rated
32
Application
Viewing the Closed Captions
Press
Use
to move to
Press
to move to "Caption".
Press
to select.
Use
to set the closed captions.
Press
to go back to the previous menu.
※ You can select these options in the following order.
※ You can get the same result by pressing the
button on the remote control.
33
Application
Viewing Picture in Picture
Press
Use
to move to
Press
to select “Mode”.
Use
to select the "On".
Press
to go back to the previous menu.
Or press
button on the remote control.
Sound from only one of the screens may be heard.
● TV/External Input
Press
to move to "Input Source"
Press
to select.
Use
to select the desired input source.
Press
to go back to the previous menu.
O r press
button on the remote control.
The sub-screen can be changed to display picture from the desired input source.
● Changing the Screen Size
Press
to move to "Size".
Press
to select.
Use
to select the desired size.
Press
to go back to the previous menu.
Or press
34
button on the remote control. .
Application
Viewing Picture in Picture
● Selecting Position
Press
to move to "Position".
Press
to select.
Use
to select the desired position.
Press
to go back to the previous menu.
Or press
button on the remote control.
Sub-screen position can be selected only from the
● Main Screen/Sub Screen Swap
Press
to move to "PIP Swap".
Press
to select.
Use
to select the "YES".
Press
to go back to the previous menu.
Or press
button on the remote control.
The main screen and the sub screen will swap.
● Selecting Sub Screen Sound
Press
to move to "Sound Select".
Press
to select.
Use
to select the "Main" or "Sub".
Press
to go back to the previous menu.
Or press
button on the remote control.
35
Application
Auto Volume Level
This feature maintains an equal Volume level ; even if you change channels.
Press
Use
to move to
Press
to move to "AVL".
Press
to select.
Use
to select the "On".
Press
to go back to the previous menu.
Listening to Stereo Sound/ MTS(Multi Television Sound)
Depending on the particular program being broadcast, you can listen to stereo, mono or a secondary Audio
Program.
Press
Use
to move to
Press
to move to "MTS".
Press
to select.
Use
to select the desired category.
Press
to go back to the previous menu.
Or press
36
Button on the remote control. (Multi Television Sound)
Application
Resetting PDP TV Settings
It resets all of the parameters to the factory default.
Press
Use
to move to
Press
to move to "Reset".
Press
to select.
Use
to select the "YES".
Press
to select
※ The PDP TV will turn off. The parameters will be set to factory default.
Panel Protection
Press
Use
to move to
Press
to move to "Orbiter".
Press
to select.
Use
to select the "On".
Press
to select.
ON : The screen will move every 30 seconds.
Right → Right → Up → Up → Left → Left → Down → Down
OFF : The screen will be in place the opposite way of orbiter On.
37
Application
Setting Time
38
Press
Use
to move to
Press
to select "Clock".
Use
to adjust the desired hour.
Press
to move one step.
Use
to adjust the desired minute.
Press
to go back to the previous menu.
Application
Automatic Power On/Off
● Clock time must be set
Press
Use
to move to
Press
to move to desired category.
Press
to select.
Setting Time for Power On
Setting Time for Power Off
Setting Hour
Use
to set
Setting Minute
Use
to select,
to set
Set/Cancel
Use
to select,
to select the
"On" or "Off"
Channel Select
Use
to set Channel
Volume Control
Use
to set volume
● To have the TV turn off after you fall a sleep
press
button on the remote control.
It automatically turns off the TV after a designated period of time
Depending on the number of times the "Sleep" button is pressed, the TV will be turned off after 30, 60, 90, 120, 150
or 180 minutes.
39
Monitor
Using TV as a Monitor
Press
button on the remote control.
Use
to move to "PC".
Press
to select.
Using TV as a Monitor
PC Mode must be on in order for you to use the TV as a monitor.
Adjusting PC Screen
Press
Use
to move to
Press
to move to "PC/HDTV".
Press
to select.
Use
to move to desired category.
Use
to adjust the setting.
Press
to go back to the previous menu.
・Auto in progress
・Phase : It adjusts the phase shift of the image. Use when image appears blurry or out of focus.
・H-Position : It moves the image on the screen horizontally.
・V-Position : It moves the image on the screen vertically.
40
Monitor
Adjusting Color Tone
Press
Use
to move to
Press
to move to "PC/HDTV".
Press
to select.
Use
to move to "Color Tone"
Press
to select.
Use
to select the desired category.
Press
to go back to the previous menu.
・Cool 1: This results in a blueish tone.
・Cool 2: This results in a more blueish tone.
・Normal : This is standard color setting.
・Warm1 : This results in a reddish tone.
・Warm2 : This results in a more reddish tone.
41
External adjustment
External adjustment
・Use the RS-232C jack to control monitor's functions externally by external equipment.
● How connect a external equipment

* Regular customer does not allow using the external adjustment that is used for service purpose only.
42
External adjustment
Set ID
Use this function to choose monitor ID number.
Press
Use
to move to
Press
to move to "Set ID".
Press
to select.
Use
to select the desired ID number.
Press
to go back to the previous menu.
The adjustment range of Set ID is 0 ~ 100.
43
External adjustment
Special features
Type of connector : D-Sub 9-pin male
No.
Pin name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (Dce side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
Pin NO.4 and Pin
NO.6 must be
connected on
monitor side
・ Use a crossed (reverse) cable.
Wire the cable so that each pair of data lines cross between the two devices. These data line pairs are RXD
(Receive to send) and TXD (Transmit data), DTR (DTE side ready) and DSR (DCE side ready), and RTS
(Ready to send) and CTS (Clear to send).
RS-232C configurations
・7-wire configuration
(Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
PDP
D-sub 9
D-sub 9
Control line
44
・ 3-wire configuration
(Not standard)
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
PDP
D-sub 9
D-sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
External adjustment
RS232C Communication Protocol
COMMUNICATION PARAMETERS
BAUD RATE : 9600 bps
Data Length : 8bits
Parity : None
Stop bit : 1bit
※ The Remote Control and PDP TV Key Control(Except Main Power) Don't Operate When Controlling PDP TV Set by PC.
Command List
Item
ASCII Code
Data(hex)
Item
ASCII Code
Data(hex)
1. Power
00h~01h
12. Sharpness
2. Input Source
00h~07h
13. Information
00h~01h
00h~08h
14. Pip On
00h~01h
15. Pip Source
00h~07h
16. Pip Location
00h~03h
3. Aspect Ratio
00h~64h
4. Volume Mute
00h~01h
5. Volume Control
00h~64h
17. Pip Sound set
00h~01h
6. Screen Mode
00h~04h
18. Pip Mode
00h~02h
7. Brightness
00h~64h
19. Remote Control On
00h~01h
8. Contrast
00h~64h
20. Ch -,+
00h~01h
9. Color
00h~64h
21. Abnormal State
00h~01h
10. Tint
00h~64h
22. Sound Mode
00h~04h
Transmission / Receiving Protocol List
* Transmission
{Command}{ }{SET ID}{ }{Data}{Cr}
{Commad}
{}
{SET ID}
{Data}
{Cr}
To Control Code PDP TV
"Space , ASCII Code = 0x20"
You Can Adjust SET ID Setup
Menu of PDP TV
Data Command
Transmit 'FF' data to data
read mode
Carriage Return
ASCII Code 0x0d
* Ok Acknowledge
{SET ID}{:}{OK}{x}{Data}{x}
The PDP TV set t ransmits ASCII based on this
format When receiving normal data. At this time,
If the data is data read mode, it indicates present
st at us dat a if t he data is dat a write mode, it
returns the data of PC.
* In case set ID is 0, Ack data doesn’t feed back, and
you can adjust all PDP set.
45
External adjustment
RS232C Communication Protocol
Commands
1. Power : p
▶ To Control Power On/Off of the PDP TV
* Transmission
{p}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Off
Data 1 : On
Data 1 : AV
Data 2 : S-VIDEO
Data 3 : Component1
Data 4 : Component2
Data 5 : PC
Data 6 : DVI
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Off
Data 1 : On
▶ Read Power On Source Status
* Transmission
{p}{ }{SET ID}{ }{FF}{Cr}
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Power Off
Data 1 : Power On TV
Data 2 : Power On AV
Data 3 : Power On S-VIDEO
Data 4 : Power On Component1
Data 5 : Power On Component2
Data 6 : Power On PC
Data 7 : Power On DVI
※ If Other Functions Transmit 0xFF data based on this
format, Ack data feeds back present status about
each function.
2. Input Source : i
▶ To Input Source Select
* Transmission
{i}{ }{SET ID}{ }{Data}{Cr}
Data 0 : TV
46
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : TV
Data 1 : AV
Data 2 : S-VIDEO
Data 3 : Component1
Data 4 : Component2
Data 5 : PC
Data 6 : DVI
3. Aspect Ratio : r
▶ To adjust screen format
* Transmission
{r}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Auto Wide
Data 1 : Wide
Data 2 : Panorama
Data 3 : Zoom1
Data 4 : zoom2
Data 5 : 4:3
Data 6 : 14:9
Data 7:4:3(In PC Mode)
Data 8:Wide(In PC Mode)
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Auto Wide
Data 1 : Wide
Data 2 : Panorama
Data 3 : Zoom1
Data 4 : zoom2
Data 5 : 4:3
Data 6 : 14:9
External adjustment
RS232C Communication Protocol
4. Volume Mute : w
7. Brightness : b
▶To Select volume mute on/off
* Transmission
{w}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off
▶ To adjust Brightness
* Transmission
{b}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
8. Contrast : k
5. Volume Control : v
▶ To adjust volume
* Transmission
{v}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
▶ To adjust Contrast
* Transmission
{k}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
9. Color : c
6. Screen Mode : s
▶ To Select Screen Mode
* Transmission
{s}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Custom
Data 1 : Dynamic (In PC Mode : High)
Data 2 : Standard (In PC Mode : Middle)
Data 3 : Movie (In PC Mode : Low)
Data 4 : Mild
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Custom
Data 1 : Dynamic
Data 2 : Standard
Data 3 : Movie
Data 4 : Mild
▶ To adjust Colour (Not available in PC Mode)
* Transmission
{c}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
10. Tint : t
▶ To adjust Tint (Not available in PC Mode)
* Transmission
{t}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
47
External adjustment
RS232C Communication Protocol
Commands
11. Sharpness : h
14. Pip Source: u
▶ To adjust Sharpness
* Transmission
{h}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
▶ To Select Pip Source
* Transmission
{u}{ }{SET ID}{ }{Data}{Cr}
Data 0 : TV
Data 1 : AV
Data 2 : S-VIDEO
Data 3 : Component1
Data 4 : Component2
Data 5 : PC
Data 6 : DVI
12. Information : f
▶ Information on/off
* Transmission
{f}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off
13. Pip On : o
▶ Pip on/off
* Transmission
{o}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off
48
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : TV
Data 1 : AV
Data 2 : S-VIDEO
Data 3 : Component1
Data 4 : Component2
Data 5 : PC
Data 6 : DVI
15. Pip Location : n
▶ To Select Pip Position
* Transmission
{n}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Right Bottom
Data 1 : Right Top
Data 2 : Left Top
Data 3 : Left Bottom
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Right Bottom
Data 1 : Right Top
Data 2 : Left Top
Data 3 : Left Bottom
External adjustment
RS232C Communication Protocol
16. Pip Sound Set : e
19. CH -, + : a
▶To Select Pip Sound
* Transmission
{e}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Main
Data 1 : Sub
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Main
Data 1 : Sub
▶ To Adjust Program Number
* Transmission
{a}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Decrement Program Number
Data 1 : Increment Program Number
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Decrement Program Number
Data 1 : Increment Program Number
20. Abnormal Status : q
17. Pip Mode : d
▶ To Select Pip Mode
* Transmission
{d}{ }{SET ID}{ }{Data}{Cr}
Data 0 : PIP
Data 1 : PBP1
Data 2 : PBP2
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : PIP
Data 1 : PBP1
Data 2 : PBP2
18. Remote Control On : j
▶ To Select Remote Control on/off
* Transmission
{j}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Pc Control
Data 1 : Remote Controller On
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Pc Control
Data 1 : Remote Controller On
▶ You Can Read PDP TV Status
* Read Only Mode
* Transmission
{q}{ }{SET ID}{ }{FF}{Cr}
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : OK
Data 1 : Standby
Data 2 : AC Down
21. Sound Mode : y
▶ To Select Sound Mode
* Transmission
{s}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Custom
Data 1 : Standard
Data 2 : Music
Data 3 : Movie
Data 4 : Speech
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Custom
Data 1 : Standard
Data 2 : Music
Data 3 : Movie
Data 4 : Speech
49
Maintenance and Service
Trouble shooting
Do not use other functions that are mentioned on this user’s manual.
It will be main reason of a faculty and motion error.
In case a problem occurs with your PDP TV, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized service center.
● Screen related Matters
Problem
Action
The screen does not appear.
Is the power plug pulled out? Insert the power plug. Turn the main
power button on and press the power button of the remote controller.
The screen appears too
slowly after the power is turned on.
This problem occurs for a brief time in the process of
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on. But if the screen does not
come af ter 1 minute has passed, contact your dealer or an
authorized service center.
Screen is too bright or too dark.
Perform brightness adjustment or Contrast adjustment. (Please refer
to page 24)
Screen is too large or too small.
Adjust the screen size. (Please refer to page 28)
Stripes appear on the screen
and it shakes.
Stop using wireless telephones, hair driers and electric drills.
Simultaneous Screen
does not appear.
Check that PDP TV and external equipment are connected.
Check the inputs of simultaneous screen by pressing sub-screen
selection.
The screen does not move.
Press the STILL button. (Please refer to page 21) Check if the Pause
button is pressed on external equipment.
Computer Input Screen is abnormal.
Perform manual fine adjustment (Please refer to page 40).
Automatic Turn On does not work.
Automatic Turn On function works only when turning the PDP TV off
with the remote controller or Standby button.
The screen does not appear on
AV source.
Check that S-VIDEO source is connected.
If AV and S-VIDEO are simultaneosely connected, you can’t select
AV source.
● Sound related Matters
Problem
50
Action
Screen appears, Voice is not heard
1. Press the "Mute"button. (page 21)
2. Increase the sound by pressing volume adjustment button.
3. Check if voice terminal of external input is connected properly.
4. Check if audio cables are connected properly.
5. If it is on PIP mode, convert audio of main screen and subscreen by pressing S/Select.
6. Select and check the other input.
If the sound still does not work and the other channels are the
same after you have done as the above, contact your dealer or
an authorized service center.
Lots of noise (static) occurs.
When connecting a Set-Top-Box, check that it is on stereo
broadcasting. If it is, the TV program may not be available or the
reception may be bad. Check the audio source with another player. If
that source is good, contact your dealer or an Authorized service center.
Maintenance and Service
Trouble shooting Tips
● Others
Problem
Action
Remote controller does not work.
1. Check if main power is On.
2. Check that the batteries of the remote controller were
loaded properly.
3. Check to see if any obstacle exists between the PDP
TV and the remote controller and remove it, if any.
4. If the batteries have no power, replace them with two
new batteries.
PDP TV makes strange noise.
It is the noise when the mechanism expands or contracts
from to changes to the environment due to factors such
as humidity, temperature, etc. It is not a failure.
PDP TV indication lamp is On.
The red means the Stand-by power is ON. It will take a
few seconds to turn off as the main power is off.
Had forgotten Password of V-Chip
Press , , , ,
buttons on the Remote
control in V-Chip function.
Can not select PC mode when D-sub
cable is connected to the RGB output
of Set-top-box.
D-sub cable must not meet VESA standard. (D-sub No. 10
pin must be grounded) Component Cable can be used if
there is an Component Terminal.(See Page 18)
This PDP TV is for household use and registered as suitable on electromagnetic waves.
Therefore, you can use it in every location as well as residential areas.
● Supporting display mode
It is optimal screen when the resolution is 640 x 480.
Resolution
640×480
720×400
800×600
1024×768
Horizontal Frequency (KHz) Vertical Frequency (Hz)
31.47
60
37.86
72
37.50
75
31.47
70
35.15
56
37.88
60
48.88
72
46.88
75
48.36
60
56.48
70
60.02
75
● Considerations in Installation
If any signal of unsupported resolution is input, the "Out of Range" message appears.
51
Maintenance and Service
Supported Display Modes
● Component Mode [ Y, CB (P B), CR (PR ) ]
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
720×480
15.73
60.00
SDTV, DVD 480i
720×480
31.47
59.94
SDTV, 480p
1280×720
45.00
60.00
HDTV, 720p
1280×720
44.96
59.94
HDTV, 720p
1920×1080
33.75
60.00
HDTV, 1080i
1920×1080
33.72
59.94
HDTV, 1080i
● Specifications
Aspect Ratio
Screen Size (H×V)
16 : 9
920.1×518.4mm
Resolution
852×480(Wide VGA)
Cell pitch (H ×V)
0.36(H)×1.08(V)mm
Displayable Colors
Brightness
16.77M(256×256× 256)
1000cd /㎡(w/o filter)
Contrast
1200:1
Viewing Angle
160 。
Input signal
Tuner
RGB Input
AC Input
Power Consumption
NTSC, SD, HD , VGA, SVGA
NTSC-M
D-Sub(15pin), DVI-D with HDCP
AC100-240V~, 50 / 60Hz, 4A
320W
If any signal of unsupported resolution is input, the "Out of Range" message appears.
The outside design and specification can be modified without any previous notice for
improving the performance.
52
Maintenance and Service
Memo
42˝ PDP TV User's Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:01:31 11:04:56Z
Subject                         : 
Keywords                        : UNREGISTERED
Modify Date                     : 2004:02:18 10:59:07+09:00
Page Count                      : 54
Has XFA                         : No
Creation Date                   : 2004:01:31 11:04:56Z
Producer                        : [ClibPDF Library 2.02-r1-1] PrintToPDF 2.2.1
Author                          : ¿Ã  ¿¸¿⁄
Mod Date                        : 2004:02:18 10:59:07+09:00
Metadata Date                   : 2004:02:18 10:59:07+09:00
Creator                         : ¿Ã  ¿¸¿⁄
Title                           : 42" NTSC MANUAL(0130).pdf
Description                     : 

EXIF Metadata provided by EXIF.tools