E RAE Electronics Industry Co EPT-4211 Plasma Display User Manual 90 X 4220 X2ANT DAYEFK 00

Download:
Mirror Download [FCC.gov]
Document ID	628516
Application ID	ViJywWxEab0Zl/ZCxVGfEg==
Document Description	Users Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	115.56kB (1444511 bits)
Date Submitted	2006-02-14 00:00:00
Date Available	2006-02-14 00:00:00
Creation Date	2006-02-14 13:53:15
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-02-14 13:53:58
Document Title	90-X-4220-X2ANT-DAYEFK-00합본
Document Creator	QuarkXPress¢â: LaserWriter 8 KH-8.6
Document Author:	이레전자

Basic Use
EN
Memorizing the Channels
Adding and Erasing Channel (Manual Method)
Press
Use
to move to
Press
to move to "Channel Settings"
Press
to select.
Press
to select.
Use
to move to "Add" or "Erase".
Press
to go back to the previous menu.
Adjusting Unclear Screen
Use screen fine-tune controls to adjust the screen when picture quality is unclear or lines appear.
Press
Use
to move to
Press
to move to "TV Tuner Setting"
Press
to select.
Press
to move to "Fine Tune".
Use
to tune.
Press
to go back to the previous menu.
27
Basic Use
Changing Picture Settings
Custom Picture Adjustment
Press
Use
to move to
Use
to move to the desired category.
Use
to adjust the setting.
Press
to go back to the previews menu.
Custom Mode
Brightness : It adjusts the brightness of the image.
Contrast : It adjusts the contrast of the image.
Sharpness : It adjusts the clarity of the image.
Color : It adjusts the intensity of the color.
Tint : It adjusts the natural tint of the image.
Color Temp : Control the red, green and blue to find a best impression of color on screen.
Phase(Component 1 , Component 2, PC) : Control this if it is out of focus.
Frequency(PC) : The position of screen is not on the right spot.
28
Basic Use
EN
Changing Sound Settings
Custom Sound Adjustment
Press
Use
to move to
Use
to move to the desired category.
Use
to adjust the setting.
Press
to exit menu.
Custom Mode
Treble : The high - pitched sound can be controlled.
Bass : The low - pitched sound can be controlled.
Balance : Control the volume of right and left speaker. The volume level 50 is recommended for the most
comfortable listening.
SRS WOW Control : SRS Labs in USA has developed the new concept of 3D sound technology for the better
sound effect with the combination of WOW, Trubass and FOCUS. With only two speakers,
it creates a stereophonic sound just like a multi - channel speakers.
Stereo Audio Out : If you would like to listen to the sound of TV through other equipments, you may connect
them to Audio out terminal.
> is a trademark of SRS Labs, Inc.
 technology is incorporated under license from SRS Labs, Inc.
, SRS and ( ) symbol are trademarks of SRS Labs, Inc.
, , SRS and ( ) symbol are trademarks of SRS Labs, Inc.
29
Basic Use
Selecting the Menu Language
Menu screen can be viewed in the language preferred by the user.
Press
Use
to move to
Press
to move to "Language".
Use
to select the desired language.
Press
to exit menu.
Setting OSD Tone Menu Background
30
Press
Use
to move to
Press
to move to "OSD Setting" .
Press
to select.
Use
select the "On" or "Off".
Press
to move to "OSD Timeout(sec)".
use
to select the desired OSD Timeout.
Press
to exit menu.
Basic Use
EN
Changing Screen Size
Press
Use
to move to
Press
to move to "Image Size".
Use
to select the desired "Image Size".
Press
to exit menu.
Or
Press
button on the remote control (Image Size Control).
4 : 3 (Normal)
Wide
Zoom 1
Wide
4 : 3(Normal)
Zoom 2
Zoom 1
Zoom 2
Screen Size
Wide - It makes 16 : 9 format for input signal.
4 : 3 - It is the standard format of broadcasting.
Zoom 1 - It enlarges the natural screen factor by approx.(5%)
Zoom 2 - It eularges the natural screen factor by approx(10%)
31
Application
Using the V-Chip
The V-Chip feature automatically locks out programming that is deemed inappropriate for children.
The user must first enter a password before any of the V-Chip restrictions can be set up or changed.
Press
Use
to move to "V-Chip".
Press
to move to "Password".
Press
to select.
Enter your 6-digit number.
The default password for a new TV set is
Press
to select.
After entering a valid password, The "V-Chip" Menu Screen will appear.
How to Enable / Disable the V-Chip
Use
to move to "Status"
Press
to select the "On" or "Off".
Press
to exit menu.
Setting up your V-CHIP password
First, Set up a personal identification number(password) and enable the V-Chip.
Use
to move to "Change password"
Enter your 6-digit New password
32
Press
to select.
Press
to exit menu.
Application
EN
Using the V-Chip
How to set up Restrictions using the "TV guidelines"
First, Set up a personal identification number (password) and enable the V-Chip.
Parental restrictions can be set up using either of two methods ;
The TV guidelines or the MPAA rating.
Use
to move to "TV Parental Guide".
Press
to select.
Use
or
Press
to set the restriction ratings.
Press
to exit menu.
to move to desired categories.
The V-Chip will automatically block certain categories that are "More restrictive".
For example, if you check "L" Sub-rating in TV-PG, then the "L" Sub-rating in TV-14 and TV-MA will
automatically be checked.
TV-Y : Young Children
TV-Y7 : Child 7 and over
TV-G : General audience
TV-PG : Parental guidance suggested
TV-14 : Parents strongly cautioned
TV-MA : Mature audience
(young Children through age 7)
(everybody else)
The restrictions for these two groups work independently.
FV : Fantasy Violence
V : Violence
S : Sexual situation
L : Adult Language
D : Sexual Suggestive Dialog
33
Application
Using the V-Chip
How to Set up Restrictions using the MPAA Ratings
The MPAA rating system uses the Motion Picture Association of America(MPAA) system, and its main
application is for movies.
When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable
rating (either MPAA or TV-Rating).
First, Set up a personal identification number(password) and enable the V-Chip.
Use
to move to "Movie Rating"
Use
to move to desired categories.
Press
to set the restriction ratings.
Press
to exit menu.
G : All Children and General audience.
PG : Parental guidance suggested
PG13 : Parental guidance for children under 13
R : Restricted viewing, parental guidance is suggested for children under17.
NC17 : No children under age 17
X : Adults only
NR : Not rated
How to set up Restrictions usiug the Canadian English.
34
Use
to move to "Canadian English".
Use
to move to desired categories.
Press
to set the restriction ratings.
Press
to exit menu.
Application
EN
Using the V-Chip
E : Exempt
C : Children
C8+ : Children eight years and older
G : General programming. Suitable for all audience
PG : Parental Guidance
14+ : Viewers 14 years and older
18+ : Adult Programming
How to set up Restrictions usiug the Canadian French.
Use
to move to "Canadian French".
Use
to move to desired categories.
Press
to set the restriction ratings.
Press
to exit menu.
E : Exempt
G : General
8 ans+ : General-Deconsaille aux jeunes enfants
13 ans+ : Cette emission peut ne pas convenir aux enFants de moins de 13 ans
16 ans+ : Cette emission ne convicnt pas aux moins de 16 ans
18 ans+ : Cette emission est reservee aux adultes
How to Reset the TV after the V-Chip Blocks a Channel.
If the TV is turned to restricted channel, the V-Chip will block it.
The Screen will go blank and the following message will appear:
To resume normal viewing, press the
key and
press your personal identification number (Password).
35
Application
Viewing the Closed Captions
Press
Use
to move to
Press
to move to "Closed Caption".
Use
to set the closed captions.
Press
to exit menu.
You can select these options in the following order.
You can get the same result by pressing the
button on the remote control.
The closed caption function will be off automatically when PIP function is on.
(To use a closed caption function, turn PIP function off.)
Listening to stereo sound MTS(Multi Television sound)
Depending on the particular program being broadcasted, you can listen to stereo, mono or a Secondary Audio
Program
Press
36
Button on the remote control.(Multi Television sound)
Application
EN
Viewing Picture in Picture
Press
Use
to move to
Press
to move to "Layout".
Press
to select.
Use
to select the
Press
to exit menu.
or
press
button on the remote control.
Sound from only one of the screens may be heard.
TV/External Input
Press
to move to input "PIP Source"
Use
to select the desired input source.
Press
to exit menu.
or
Press
button on the remote control.
The sub-screen can be changed to display picture from the desired input source.
PIP Source Matrix Table.
Main Soure
Pip Soure
TV
Composite 1
Composite 2
S-Video
Component 1
Component 2
PC
DVI
TV
Composite 1 Composite 2
S-Video
Component 1 Component 2
PC
DVI
37
Application
Viewing Picture in Picture
Changing the Screen Size
Press
to move to "Window Layout".
Use
to select the desired size.
Press
to exit menu.
or
Press
button on the remote control.
Selecting Position
Press
to move to "PIP Position".
Use
to select the desired position.
Press
to exit menu.
or
Press
button on the remote control.
Sub-screen position can be selected only from the
Selecting Sub Screen Sound
Press
to move to "Sound Select".
Use
to select the "Primary" or "Secondary".
Press
to exit menu.
or
Press
button on the remote control.
The sound of the sub screen can be selected when PIP is being displayed.
38
Application
EN
Panel Safety
Press
Use
to move to
Press
to move to "Panel Safety".
Press
to select.
Use
to select the desired menu.
Press
to select.
Press
to exit menu.
Scroll
Power Saving
-On : The screen will move every 10 seconds.
-Off : The screen will be in place opposite way of scroll On.
Image Inversion- Enable signal for preventing image sticking.
-Mode 1 : Normal mode.(Default)
-Mode 2 : Supporting high power save mode.
-Mode 3 : Supporting middle power save mode.
-Mode 4 : Supporting low power save mode.
Source Rename
Press
Use
to move to
Press
to move to "Source Rename".
Press
to select.
Press
to select the Input Source.
Press
to move one step.
Press
to select the desired
Default/DVD/VCR/Satellite/Antenna
Press
to exit menu.
39
Application
Auto Volume Level
Press
Use
to move to
Press
to move to "AVL".
Use
to select the "On" or "Off".
Press
to exit menu.
Resetting PDP TV Settings
It resets all of the parameters to the factory default.
Press
Use
to move to
Press
to move to "Reset".
Press
to select.
The PDP TV will be turned off. The parameters will be set to factory default.
40
Application
EN
Setting Time
Press
Use
to move to
Press
to select "Timer Settings".
Press
to select
Use
to adjust the desired hour.
Press
to move one step.
Use
to adjust the desired miuntes.
Press
to exit menu.
41
Application
Automatic Power On/Off
Clock time must be set.
Setting Time for Power On
Setting Time for Power Off
Setting Hour
Use
to set
Setting Minute
Use
to select,
to set
Set/Cancel
Use
to select,
to select the
"On" or "Off"
Volume Control
Use
to set volume
To have the TV turn off after you fall asleep
press
button on the remote control.
It automatically turns off the TV after a designated period of time
Depending on the number of times the "SLEEP TIME" button is pressed, the TV will be turned off after 30, 60, 90, 120, 150
or 180 minutes.
42
Monitor
EN
Using TV as a Monitor
Press
button on the remote control.
Use
to move to "PC".
Press
to select.
Using TV as a Monitor
PC must be turned on in order for you to use the TV as a monitor.
Adjusting PC Screen
Press
Use
to move to
Use
to move to “H-Position or V-Position”.
Use
to adjust the setting.
Press
to exit menu.
Custom Mode
Auto
H-Position : It moves the image on the screen horizontally.
V-Position : It moves the image on the screen vertically.
43
Maintenance and Service
Trouble shooting
Do not use other functions that are net mentioned in this user’s manual.
In case a problem occurs with your PDP TV, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized service center.
Screen related Matters
Problem
Action
The screen does not appear.
Is the power plug pulled out? Insert the power plug. Turn the main
power button on and press the power button of the remote controller.
The screen appears too
slowly after the power is turned on.
This problem occurs for a brief time in the process of
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on. But if the screen does not
come after 1 minute contact your dealer or an authorized service
center.
Screen is too bright or too dark.
Perform brightness adjustment or Contrast adjustment.
Screen is too large or too small.
Adjust the screen size.
Stripes appear on the screen
and it shakes.
Stop using wireless telephones, hair driers and electric drills.
Simultaneous Screen
does not appear.
Check that PDP TV and external equipment are connected.
Check the inputs of simultaneous screen by pressing sub-screen
selection.
The screen does not move.
Press the STILL button. Check if the Pause button is pressed on
external equipment.
Computer Input Screen is abnormal.
Perform manual fine adjustment.
Automatic Turn On does not work.
Automatic Turn On function works only when turning the PDP TV off
with the remote controller or Standby button.
Sound related issues
Problem
44
Action
Screen appears, Voice is not heard
1. Press the "MUTE"button.
2. Increase the sound level by pressing volume adjustment button.
3. Check if sound terminal of external input is connected properly.
4. Check if audio cables are connected properly.
5. If it is on PIP mode, convert audio of main screen and subscreen by pressing"SOUND SEL"
6. Select and check the other input.
If the sound still does not work and the other channels are the
same after you have done as the above, contact your dealer or
an authorized service center.
Lots of noise (static) occurs.
When connecting a Set-Top-Box, check that it is on stereo
broadcasting. If it is, the TV program may not be available or the
reception may be bad. Check the audio source with another player. If
that source is good, contact your dealer or an authorized service center.
Maintenance and Service
EN
Trouble shooting Tips
Others
Problem
Action
Remote controller does not work.
1. Check if main power is On.
2. Check that the batteries of the remote controller were
loaded properly.
3. Check to see if any obstacle exists between the PDP
TV and the remote controller and remove it, if any.
4. If the batteries have no power, replace them with two
new batteries.
PDP TV makes strange noise.
It may be due to mechanical expansion or contraction
changes suh as humidity, temperature, etc, It is not a
failure.
PDP TV indication lamp is On.
The red means the Stand-by power is ON. It will take a
few seconds to turn off as the main power is off.
Had forgotten Password of V-Chip
buttons on the
Press
Remote control in V-Chip function.
Can not select PC mode when D-sub
cable is connected to the RGB output
of Set-top-box.
D-sub cable not meeting VESA standard. (D-sub No. 10
pin must be grounded) Component Cable can be used if
there is an Component Terminal.
This PDP TV is for household use and registered as harmless on electromagnetic waves.
Therefore, you can use it in every location as well as residential areas.
Supporting display mode
Screen is optimal when the resolution is 1280 x 1024/60Hz.
Resolution
640 480
720 400
800 600
1024 768
1280 1024
Horizontal Frequency (KHz) Vertical Frequency (Hz)
31.47
60
37.86
72
37.50
75
31.47
70
35.15
56
37.88
60
48.08
72
46.88
75
48.36
60
56.48
70
60.02
75
63.94
60
Considerations in Installation
Any input of unsupported resolution the "Out of Range" message appears.
45
Maintenance and Service
Supported Display Modes
Component Mode [ Y, CB (PB), CR (PR) ]
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
720 480
15.73
60.00
SDTV, DVD 480i
720 480
31.47
59.94
SDTV, 480p
1280 720
44.96
59.94
HDTV, 720p
1280 720
45.00
60.00
HDTV, 720p
1920 1080
33.72
59.94
HDTV, 1080i
1920 1080
33.75
60.00
HDTV, 1080i
Specifications
Aspect Ratio
16 : 9
Screen Size (H V)
920.1 518.4mm
Resolution
1024 768 (XGA)
Cell pitch (H V)
Displayable Colors
Brightness
Contrast
Viewing Angle
Input signal
Tuner
0.900(H)
676(V)mm
16.77M (256 256 256) / 10.7Billion
1200cd/
(w/o filter)
10000:1(MAX)
160
NTSC, SD, HD , VGA, SVGA, XGA, SXGA (1280 1024 60Hz)
NTSC-M
PC Input
Analog RGB (D-Sub 15pin), DVI-D (HDCP)
AC Input
AC100-240V~, 50/60Hz, 5A
Power Consumption
380W
Any input of unsupported resolution.
The cabinet design and electronics specifications will be modified without prior notice for
improving the performance.
46
Maintenance and Service
EN
Memo
47
Maintenance and Service
Memo
48
Maintenance and Service
EN
Memo
49
USER INFORMATION
Note: This equipment has been tested and found to comply with the
limit for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to connect
the interference at his own expense.
Change or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This is a class B product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
90-X-4220-X2ANT-DAYEFK-00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 25
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:eb9e1d91-7caa-449c-aca9-92881c5fb80e
Modify Date                     : 2006:02:14 13:53:58+01:00
Create Date                     : 2006:02:14 13:53:15+01:00
Metadata Date                   : 2006:02:14 13:53:58+01:00
Document ID                     : uuid:1e9708c8-4241-4f18-8c01-a52d1367d04b
Format                          : application/pdf
Title                           : 90-X-4220-X2ANT-DAYEFK-00합본
Creator                         : QuarkXPress¢â: LaserWriter 8 KH-8.6
Author                          : 이레전자
Producer                        : Acrobat Distiller 6.0 (Windows)

EXIF Metadata provided by EXIF.tools