E TECH IM101 Private Land Mobile Radio for Vehicle (VHF) User Manual IM101

Download:
Mirror Download [FCC.gov]
Document ID	757734
Application ID	7HPKLPtoJez31FleDEMNbg==
Document Description	Users Manual II
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.07kB (363388 bits)
Date Submitted	2007-02-12 00:00:00
Date Available	2007-02-12 00:00:00
Creation Date	2007-02-02 20:30:43
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-02-02 20:30:43
Document Title	Microsoft Word - IM101메뉴얼.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	james_kwon

E-TECH Co., Ltd
1/18
▶ Table of Contents◀
1.
Introduction
2.
Description of Unit
3.
Technical Specifications
4. Feature and operation
5.
FILE: IM101 service manual.doc
Antenna Installation
2006.01.10
8 E-TECH Co., Ltd
2/26
1. Introduction
IM101 has a compact size with a various features in the range of 136~174MHz.
Has a various features shown as below.
IM101 constructed with a microprocessor controlled, temperature compensated Phase Locked
Loop(PLL) frequency synthesizer.
The radio features a double conversion receiver and a direct FM
transmitter modulator. A special integrated circuit provides support to sub-audible signaling(CTCSS & DCS)
and most of the receiving parts are switched off periodically in the power save mode to reduce battery current
drain during standby.
2. Description of Unit
Items
Model
Radio
IM 101
Supplied
Package
User manual
Items
Model
Hand Microphone
Accessories
Battery Cable
Pedestal
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
3/26
3. Technical Specifications
3-1 General
1) Frequency range
136~174 MHz
2) Channels
255 Channels
3) Channel spacing
12.5 kHz/25 kHz
4) Communication method
Simplex
5) Antenna Impedance
50 ohm
6) Power supply voltage
DC 13.6V
7) Current Drain
8) Microphone
When Transmitting(40W)
< 9A
When Receiving(3W)
< 1A
Transmit standby
< 150mA
External Condenser Mic
9) Operating temperature range:
-30℃ ∼ +60℃
10) Size
178(W)x49(H)x195(D)
11)
1600g
Weight
3-2 Transmitter
1)
Power Output
HIGH – 40W,
LOW - 5W
2)
Modulation
8K50F3E/16K0F3E
3) Oscillator method
PLL
4) Frequency Stability
less than ±0.00025% (±2.5PPM)
5) Maximum frequency deviation: ±2.5 kHz(Narrow)/ ±5 kHz(Wide)
6) Audio Distortion
less than 5% (1 kHz 60%)
7)
SPURIOUS Emission
-75 [dBc]
8)
FM Hum & Noise
-40 / -45 [dB] (HP8920A 300Hz ∼ 3kHz BPF)
9)
BAND
38[MHz]
SPREAD
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
4/26
3-3 Receiver
1) Receiver Type
Double Super Hetero type
2) Sensitivity
-0.25uV e.m.f ( 12dB SINAD )
3) Frequency Stability
±0.00025%(±2.5PPM)
4)
SPURIOUS
Rejection :
5) Adjacent Channel Selectivity:
-70 dB
-65 dB (Narrow) , -70 dB (Wide)
6) Distortion
5% (1 kHz 60%)
7) Hum & Noise
-40 / -45 dB(HP8920A 300Hz ∼ 3kHz BPF)
8) Audio output
Normal 3W ( Max 5W )
9) BAND SPREAD
38MHz
10) Speaker size
58 * 35 Oval
4. Feature and Operation
EXTERNAL VIEW
4)LCD
1)POWER ON/OFF
& Volume control
7)Mic Jack &
PC-Programming
Jack
2) LED
3)TX POWER
HIGH/LOW
8)Squelch
level
9)DOWN button
5)SCAN Button
6)SPEAKER
12) Monitor
Key
10)Menu Button
11)UP button
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
5/26
4-1 Features & Operation
1. Monitor
Press the Monitor key momentarily to disable the Tone squelch.
2. Radio Call
By using Various 5Tone, individual / Group call is available.
16 Receiving codes are available as well as open call.
3. Missed calls list
16 Missed calls can be listed. If a call remains unanswered, the call will be stored
by the radio.
4. contact list
During a call, the contact list may be used to give access to up to 16 preprogrammed
numbers accessed via the menu.
5. status list
A status is a code for transmitting prearranged messages, e.g. status “05” may indicate
“launch”. Status list contains up to 30 entries.
6. Channel : 255 channel
7. Scan ON/off
8. Power level : Power level is adjustable in each channel respectively.
9. Talkaround on/off
10. Emergency :
11. Lone Worker
12. Tx Tone select : In the menu, tx dcs /ctcss tone is adjustable.
13. Rx Tone select : In the menu, rx dcs /ctcss tone is adjustable.
14. Group : Defines group tone. You can select tone code for group, and it is used as a default value
. 0~9 and a, b, c, d available. And “A” is used as a basic value..
15. BEEP ON/OFF : BEEP sound ON/OFF.
16. KEY LOCK : LOCK/UNLOCK Button KEY.
17. SQUELCH : Squelch level is adjustable
18. AUTO SQUELCH : Squelch level is adjustable automatically by surroundings.
19. DTMF ON/OFF : DTMF function is available.
20. VOX : VOX LEVEL is adjustable by pushing up and down button.
21. AUTO VOX : VOX level is adjustable automatically by surroundings.
22. P - SCAN : Priority Scan
23. POWER SAVE : Power save mode is available.
24. PASS WORD : This function is useful for security reason.
25. Dimmer : Control back light
26. SCRMABLE : Internal Voice Scrambler is available.
27. STUN / UNSTUN : For added security and to avoid abuse of the radio system in which you operate
a feature known as Stun/Unstun is included in your radio.
28. BACK LIGHT : Lamp is lighting when you check LCD status.
29. Reset : Radio Data Reset.
30.MIC GAIN: Mic sensitivity control
31.Vari Call :Variable Call
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
6/26
4-2 LCD Display and Icons
1.ANT GAZE ; Shows the received signal strength.
2.TX POWER HIGH: Indicate power level
3.KEY LOCK: Appears during key lock function is ON.
4.ALART(BEEP) ON/OFF: Appears when beep sound is turned ON.
5.VOX ON/OFF: Appears when VOX function is turned On.
6.SCAN: Appears when Scan function is activated.
7.SCRAMBLE: Appears while the voice scrambler function is activated.
8.TALK AROUND Indicator.
4-3 Features
1. Channel
This radio offers up to 255 channels
1). By using
or
button,
you can select the desired channel.
2. Missed calls list
Up to 16 calls can be stored.
If the same radio calls more than once, only the most recent call is stored.
When fifteen calls have been stored by the radio, depending on the radio programming the sixteenth call
received may overwrite the first or not be stored by the radio.
1).
to enter Menu Mode.
2) Display shows
3)
to select
4)
or
5)
to scroll list
to exit
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
7/26
3. Contact list
1).
2)
to enter Menu Mode.
or
3)
to select
4)
or
5)
to until
to scroll list
to exit
4. Status call list
4-1. Making STATUS call
1)
2)
3)
to enter Menu Mode.
or
to until
to select
or
to scroll list
4)
5) Push PTT KEY for sending message on the LCD.
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
8/26
4-2 Make STATUS Message
1)
to enter Menu Mode.
or
2)
3)
to select
4)
or
5)
to SELECT
to until
to scroll list
5. Lone work
1).
to enter Menu Mode.
2)
or
3)
to select
4)
or
FILE: IM101 service manual.doc
to until
to
select
ON/OFF
2006.01.10
8 E-TECH Co., Ltd
9/26
6. Tx power
.1)
. to enter Menu Mode.
or
2)
to until
to select
3)
or
4)
5)
to
select HIGH / LOW POWER
to select
7. Tx Tone
Selecting Transmitting TONE(CTCSS/DCS).
1).
2)
3)
4)
to enter Menu Mode.
or
to until
to select
or
0= NON TONE
to Select TONE을 either CTCSS or DCS.
1-38 CTCSS
101 – 183 DCS TONE
5)
to select exit
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
10/26
8. Rx Tone
Changing Receiving TONE(CTCSS/DCS).
1).
2)
3)
4)
to enter Menu Mode.
or
to until
to select
or
0= NON TONE
to select TONE either CTCSS or DCS.
1-38 CTCSS
101 – 183 DCS TONE.
5)
to select exit
9. Group
Changing GROUP Tone.
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to select scroll list
to select exit
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
11/26
10. Beep on/off
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to select on off .
to select
11. Key lock
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select key lock /unlock.
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
12/26
12. Squelch level
16 level is available. 0 = terminate sq function
to enter Menu Mode.
1).
or
2)
3)
to select
or
4)
5)
to until
to the scroll list
to select exit
13. Auto Squelch
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select on /off .
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
13/26
14. Scan
1).
2)
3)
to enter Menu Mode.
or
to until
to scan.
4) Push PTT for exit
15. DTMF
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
14/26
16. Vox on/off
1).
2)
to enter Menu Mode.
or
3)
to until
to select
or
4)
to
select ON /OFF.
to select
5)
17. Vox Level
16 level is available..
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to select
to scroll list
for exit
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
15/26
18. Auto Vox
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
19. Priority Scan
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
16/26
20. Priority scan CH
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to scroll list
to select for exit
21. Power save
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
17/26
22. Talkaround
1).
to enter Menu Mode.
or
2)
to until
to select
3)
or
4)
to
select ON /OFF.
to select
5)
23. Password
1).
to enter Menu Mode.
2)
3)
4)
5)
or
to until
to select
or
to
select ON /OFF.
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
18/26
24. Password CH
1).
2)
3)
to enter Menu Mode.
or
to until
to select
4) ---- will display on the LCD( enter old password)
or
by pushing up and down KEY to change password.
by pushing enter KEY to change digit of password.
5) Enter new password by 4 digit.
25. Dimmer
Back light Control
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to select level
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
19/26
26. Scramble
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
27. Status call Send
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
20/26
28. Misscall List Delete
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
29. Radio Reset
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to
select ON /OFF.
to select
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
21/26
30. Variable call
1).
2)
3)
4)
5)
to enter Menu Mode.
or
to until
to select
or
to select 1,2,3~A,B,C,D,E
to select
31. Mic Sensitivity Level (Mic Gain Control)
1).
2)
3)
to enter Menu Mode.
or
to until
to select
or
to select HIGH/LOW.
4)
“HIGH “is high sensitivity and “LOW” is normal sensitivity
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
22/26
-Connector of Operation
①
⑤
ⓐ ⓑ
⑥
⑩
ⓒ
Antenna
10PIN CONNECTOR DESCRIPTION
Connection
Pin NO
Function
Remark
GND
①
Ground
GND
CPU_INT_PTT
②
Push To Talk
GND Enable
5V
③
Internal
FLAT_AUDIO_IN/OUT
④
Constant
S/W_BATT
⑤
Switched Battery
CPU_RSSI_DET
⑥
Received Signal Strength Indication
CPU_RX_PATH
⑦
Busy Rx
MIC
⑧
MIC Input
CPU_SP_MUTE
⑨
Speaker ON/OFF
CPU_TX_PATH
⑩
MIC MUTE
5 Volt Regulator
5 Volt
Audio Signal Level
13.6V Enable
5V Enable
(Rx Signal Open)
0V Enable
(Speaker Close)
0V Enable
(MIC Input Close)
Power Supply & External Speaker Jack
Connection
Pin NO
Function
Remark
13.6V
ⓐ
Power Cable
13.6V
GND
ⓑ
Ground
Speaker OUT
ⓒ
External Speaker Jack
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
23/26
5. Antenna Installation
5-1 Antenna Installation and Compliance with Radio Frequency(RF) Energy Safety Standards
[IMPORTANT NOTE]
To assure optimum performance and compliance with RF Energy Safety standards, this
antenna installation guidelines and Instructions are limited to metal-body vehicles with
appropriate ground planes and take into account the potential exposure of backseat
passengers and bystanders outside the vehicle.
[NOTE]
For mobile radios with rated power of 7 watts or less, the only installation restrictions are
to use only E-tech approved antennas and install the antenna externally on metal body
vehicles.
For mobile radios with rated power greater than 7 watts, always adhere to all
the guidelines and restrictions in 5.2 below.
5-2 Selecting an Antenna Site/Location on a Metal Body Vehicle
1. External installation – Check the requirements of the antenna supplier and install the vehicle
antenna external to a metal body vehicle in accordance with those requirements.
2. Roof top – For optimum performance and compliance with RF Energy Safety standards, mount
the antenna in the center area of the roof.
3. Trunk lid – On some vehicles with clearly defined, flat trunk lids, the antenna of some radio
models (see restrictions below) can also be mounted on the center area of the trunk lid.
For
vehicles without clearly defined, flat trunk lids (such as hatchback autos, sport utility vehicles, and
pick-up trucks), mount the antenna in the center area of the roof.
Before installing an antenna on the trunk lid.
• Be sure that the distance from the antenna location on the trunk lid will be at least 60cm (24
inches) from the front surface of the rear seat-back to assure compliance with RF Energy Safety
standards.
• Ensure that the trunk lid is grounded by connecting grounding straps between the trunk lid and
the vehicle chassis.
If these conditions can not be satisfied, then mount the antenna on the roof top !
4. Mounting restrictions for certain radio models
For more than 40 Watt VHF models, the 1/4 wave antenna should be mounted only in the
FILE: IM101 service manual.doc
2006.01.10
8 E-TECH Co., Ltd
24/26
center area of the roof, not on the trunk lid, to assure compliance with RF Energy Safety
standards.
5. Ensure that the antenna cable can be easily routed to the radio.
Route the antenna cable as
far away as possible from any vehicle electronic control units and associated wiring.
6. Check the antenna location for any electrical interference.
7. Make sure any other mobile radio antenna on this vehicle is at least 30.48 cm (1 foot) away from
this antenna.
[NOTE]
Any two metal pieces rubbing against each other (such as seat springs, shift levers, trunk
and hood lids, exhaust pipes, etc.) in close proximity to the antenna can cause severe
receiver interference.
5-3 Antenna Installation Procedure
1. Mount the antenna according to the instructions provided with the antenna kit.
cable to the radio mounting location.
Run the coaxial
If necessary, cut off the excess cable and install the cable
connector.
2. Connect the antenna cable connector to the radio antenna connector on the rear of the radio.
5-4 Completing the Installation
1. Mount the microphone clip to a convenient spot near your radio.
2. Your microphone has a telephone-type connector at the end of is cord.
Plug the microphone
into the control head connector.
3. To complete your radio installation, plug the power cable into the radio power connector.
FILE: IM101 service manual.doc
2006.01.10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:02:02 20:30:43+09:00
Create Date                     : 2007:02:02 20:30:43+09:00
Format                          : application/pdf
Title                           : Microsoft Word - IM101메뉴얼.doc
Creator                         : james_kwon
Document ID                     : uuid:e87454b1-b59f-4f5c-bec9-8f86c9c5e5c3
Instance ID                     : uuid:23572cf3-d562-44dd-b075-8f4e53264167
Page Count                      : 24
Author                          : james_kwon

EXIF Metadata provided by EXIF.tools