E TECS 9ET-TX 2.4GHz Video Baby Monitor User Manual 6 21NANNY

E-TECS LIMITED 2.4GHz Video Baby Monitor 6 21NANNY

Users Manual

2.4 GHz Video Baby MonitorUser Guide• Please read the following instrucons and safety warnings before you install the Video Monitor.• Please retain these instrucons for future reference• Tool needed: Screwdriver (not included) for mounng the camera on the wall if needed• Addional camera(s) (sold separately).2 45 6 7 8910 11 123Important Safety WarningsWARNING!Strangulaon Hazard - Children have STRANGLED in cords.Keep this cord out of the reach of children(more than 3 feet (0.9 m) away).To prevent cord entanglement and strangulaons:• Do not place the Camera or AC adaptor cord within reach of children.• Do not place the Camera or AC adaptor cord in, or aach it to, a crib or playpen.• Always fasten the AC adaptor cord of the Camera on the wall with the security clips provided.• Never use extension cords with AC adaptors. Use only AC adaptors provided.Important Safety Instrucons:• Adult assembly is required. Keep small parts away from child’s reach.• This product is not a toy. Do not allow children to play with it.• This Video Monitor is not a substute for responsible adult supervision.• Test the Video Monitor and all its funcons so that you are familiar with it prior to actual use.• When the power adaptor is plugged into an electrical outlet, do not touch the exposed end.Cauon – risk of heat generaon, fire or explosion.• Li-ion baery is built into the product.• Charge the product by the designated charging method.• Do not place the product in or near fire, or put the product in a microwave.• Do not expose the product to high temperatures above 140 F.• Do not disassemble the product.• Do not expose the product to excessive shock such as drooping from a high place.• Keep the product dry.Dispose of the product appropriately.Auto View Orientaon – Portrait to LandscapeYour Video Monitor is able to switch from Portrait to Landscape view, simply place the Monitor in the upright posion for Portrait View and lay it on its side for Landscape View. Note: There is a one second delay when switching views, this is a normal funcon.Night Vision ModeThe Camera features 6 Infrared LEDs around the lens designed to capture clear images in dark environments or at night. When the Light Sensor detects low light levels, the Night Vision Mode will automacally acvate and the video shown in the Monitor will display in black and white.Charging the BaeryYour Video Monitor has an internal, replaceable, 2100mah lithium-ion rechargeable baery. Charge the baery by connecng the Monitor to a power outlet using the power cord provided.Video ON/OFFThis feature allows you to turn the video screen OFF while maintaining the audio monitor ON. Simply press the Video ON/OFF key to turn the video screen ON or OFF.IMPORTANT: When the Monitor is on power save mode, the Video Screen will automacally turn OFF aer 30s, 60s, 90s depends on VOX setup.This sleep mode helps conserve baery power. To turn video back ON, simply press the Video ON/OFF buon.MonitorCameraA Infrared LED LightsB Camera LensC MicrophoneD Pair/ResetE Temperature sensorF Antenna G Night lightH AC Adapter Jack I Wall MountIACDBDEHFG1 X user manual1. Connect Camera to AC outlet2. Camera works automacally.3. Disconnect the power from the camera, camera automacally switch off.Put the camera on a flat area or hang it on the wall, see the Demo.Camera paired (Default)The baby monitor is already paired as default, you do not need to pair the camera and the monitor unless you reset your camera. For pairing each other please take a reference from UI definion, Camera pageMonitor:BABY CAREGet Frequency Opon, press to setup target frequency.Press with saving, press without saving and return to Seng page.Get Background Color opon, press to setup target background color, Press with saving, press without saving and return to Seng page.Get Lullaby, press to setup Lullaby on/off.Press with saving, press without saving and return to Seng page.Get Night Light, press to setup Night Light on/off.Press with saving, press without saving and return to Seng page.TEMPERATURE ALERTSetup High/Low Temperature Alert, Press to setup High/Low temperature target degree, Press to choose,Press ‘ OK ’ to confirm, press ‘ Cancel ’ to cancel.No video display on screen• Are the Monitor and Camera plugged in to a working electrical outlet? – Make certain any light switches that control power to the wall outlet are ON. – Check for pinched power cords.• Are the Monitor and Camera turned ON? – To turn Monitor ON. – To connect the camera into the wall plug• Is the Monitor in sleep mode? – Press the Video ON/OFF key to turn the display ON.Monitor lost signal, “Out of Range”• If there is no connecon, the words “Out of Range” will be shown on the video display.• Make certain that the Camera is turned ON, the green LED Power On indicator should be lit.• The Monitor may be too far away from the Camera, bring the Monitor closer to the Camera.• The Camera could have lost its connecon to the Monitor. Pair the units by following the “Pair” a Camera instrucons.Ensure that the Monitor and Camera are away from obstacles that may interfere with the signal such as; walls, floors, ceilings, Wi-Fi routers, microwave ovens, cordless phones, Bluetooth devices, home computers, among other electronic devices. It is recommended to keep your Video Monitor away from these types of devices at least 5 feet. If the signal is weak, try moving the Monitor and/or Camera to different posions in the rooms.Video on screen is in black and white•The Camera is in a dark environment and Night Vision Mode has been acvated. Ensure that the Camera is in a well-lit environment to de-acvate Night Vision Mode.Audio Feedback• The units may be too close, move the Monitor further away from the Camera.• Look for any noise source in baby’s room. Remove noise source or move Camera away from the source. Monitor not responding (frozen or unresponsive)• Switch off and on the monitor.1. Using your Video Monitor2. Package included3. Geng Started Camera Camera paired (Default) Monitor4. Menu Opons UI definion VOX CAMERA ALARM ZOOM IN/OUT SETTINGS TEMPERATURE ALERT5. Troubleshoong6. FCC and IC Regulaons7. Cleaning and Care.............................6..........................................7..............................................7..........................................................8...........................8..........................................................9.............................................10.............................................10..........................................................10..................................................10.....................................................10..........................................10.................................................11.............................11..........................................12...............................14........................................16To clean your Video Monitor, disconnect all cables and turn OFF. Use a so, lint-free cloth. Avoid geng moisture in openings.Maintain your Video Monitor away from direct sunlight, hot or humid areas. Do not let product get wet.FCC Part 15: This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) thisdevice may not cause harmful interference, and (2) this device must accept any interference received, including interference thatmay cause undesired operaon.Warning: Changes or modificaons to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separaon between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product.SETTINGS Geng Sengs, me and date, language, temperature mode, frequency opon, color, lullaby, night lightGet Time and date, press to setup date and me, Press to get the target me and date, Press ‘ OK ’ to confirm, press ‘ Cancel ’ to leave as it is.Get Language, press to setup target language, Press with saving, press without saving and return to Seng page.Get Temperature Mode, press to setup target Temperature mode.Press with saving, press without saving and return to Seng page.Camera:VOXPress to setup Sensivity/sleep, get Sensivity/sleep bar, Press to get the target seng.Press to exit, press to save the seng and exit. CAMERA Press to setup Camera 1, 2, 3, 4, manual, autoChoose camera 1, 2, 3, 4 , press to choose pair/un-pair, Press to choose OK/cancel，Press OK to save and back to Live Video Press to choose manual, auto. UI definion Press LCD on/off buon 3s to get into User Interface.This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.Radiaon Exposure Statement:This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (8 in.) between the radiator & your body.Industry CanadaThis Class B digital apparatus complies with Canadian ICES-003.IC WARNING:This device complies with Industry Canada license-exempt RSS standard(s). Operaon is subject to the following two condions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operaon of the device.Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce potenal radio interference to other users, the antenna type and its gain should be so chosen that , the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communicaon.RF Radiaon Exposure & Hazard Statement:To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a locaon such that the antenna of the device will be greater than 20 cm (8 in.) away from all persons.Table of Contents 1. Using your Video Monitor- 2. Package included- 3. Geng Started-4. Menu Opons- 5. Troubleshoong-6. FCC and IC Regulaons- 7. Cleaning and Care-1 X camera1 X monitor with 2100mah rechargeable Li-baery1 X monitor charging dock2 X switch power adaptors131415161. Connect Monitor to AC outlet.2. Switch the ON/OFF buon in ON posion, the monitor turns to start to work.3. The Monitor and Camera are turned on, video captured by the Baby unit will appear on the video screen.4. Switch ON/OFF buon in OFF posion the monitor will shut immediately.5.While Pressing to have talk back to the camera, release buon to hear the baby voice. BABY CAREABCDEFGHJKILMNOA 2.4 Inch Video ScreenB Volume Up C Power ON indicator D OK/Talk keyE Brightness down / Lullaby on/offF Signal Indicator G Brightness up / Night Light on/offH Volume DownI Video ON/OF FeyJ Speaker K Belt ClipL Power ON/OFF keyM Baery DoorN Cradle O AC Adapter Jack ALARMPress to setup Alarm Volume/Alarm Clocks,Get Alarm Volume, press to setup Volume,press to choose right volume,Press or to save and exit to UI icon,Get Alarm Clock, press to setup Morning call, Feeding alarm 1, 2, 3, 4 press to setup alarm status,Press to setup on/off, press to save and return to Alarms clock.Get Alarm me to press to be able to setup mer, Press and to get right me.Press to get Alarm me without saving, press to save the me.ZOOM IN/OUTGet Zoom, press to setup Zoom in/out to press to choose the right zoom me.Press or to save and exit.

Navigation menu