E style Technology HR801 Walkie talkie User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3728844
Application ID	RWAzFQmPO84s9Ut4i2qd2A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.7kB (208812 bits)
Date Submitted	2018-01-25 00:00:00
Date Available	2018-01-25 00:00:00
Creation Date	2018-01-16 10:09:32
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-01-23 16:34:38
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Walkie talkie Manual
Please read this manual carefully before you use it.
Functions:
1)
2)
3)
4)
0.5W output
3 Channels
Call tone
Flashlight
Explanation for functional key
1)
2)
Battery: 3 pieces AAA batteries for this walkie‐talkie.
Belt‐clip：There is a belt‐clip for easy moving with your body.
3)
Call button (
): transmit your information to other
walkie‐talkie sets.
Display：LED show current channel numbers visually.
4)
): turn on or turn off by pressing this button
5)
On/off button(
long.
6)
Lamp button(
): To tune on the lamp by pressing this button
long.
Channel button (
)：To change the current signal channel by
pressing this button long.
7)
1). Belt‐clip installation
Push the belt‐clip into back slot of walkie‐talkie, if want to take off
the belt‐clip, just need open the axis lock and push the belt‐clip
inversely.
2)
Battery installation
Firstly take off the belt‐clip, then open the battery compartment
door, and put in 3 pieces AAA batteries, make sure ＋ and ﹣
direction.
Note: if don’t use this machine, please take off batteries.
Operation
Power on or off：
After installed batteries, walkie‐talkie is on ready to work, it will
beep and the LED display shows the current signal channel number.
As auto squelch of walkie‐talkie, it will not sound before received
button long till LED display blanked,
the call information. Press
again press it long, the walkie‐talkie will rework.
Transmit information：
While you pressing long the Talk button
, than talk 3~4cm far
from walkie‐talkie, if your voice is so louder or the distance is so close
to walkie‐talkie, the signal will loss quality or distort on opponent sets.
Release the Talk button in order to listen to opponent.
Note: You have to talk in the same signal channel whatever how
many people communicate.
Flashlight：
The flashlight will be helpful for you in dark conditions, press the
flashlight butto
n, it will work.
Change signal channel:
Press
button long to change signal channel.
Call other sets：
to call other walkie‐talkie in some signal
Press call button
channel, all working walkietalkies in effective distance and will receive
your call ringtone
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
‐‐Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
FCC Radiation Exposure Statement
The device complies with RF specifications when the device used at 25 mm
from your front face and 0 mm from your body. Third-party belt-clips, holsters,
and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements
may not comply with RF exposure requirements and should be avoided.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:01:16 10:09:32+08:00
Modify Date                     : 2018:01:23 16:34:38-05:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:01:23 16:34:38-05:00
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D204852CBB5C3F7CAE9D3A2CEC4D5FD>
Creator                         : Administrator
Document ID                     : uuid:f0368446-7015-4690-9391-5e9cc336b926
Instance ID                     : uuid:6580c110-ff49-4ac5-b29b-e9f962719b81
Page Count                      : 5

EXIF Metadata provided by EXIF.tools