EAW JFL210 User Manual To The B8592667 9a3d 45d1 831e B6432d1ea0af

User Manual: EAW JFL210 to the manual

Open the PDF directly: View PDF PDF.
Page Count: 6

Scroll down to view the document on your mobile browser.
Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.comEAW products are continually improved.  All specifications are therefore subject to change without notice.  Part Number:  RD0480 (A) JFL210 September 2008JFL210 Specifications      group · JDESCRIPTIONThe JFL210 compact line array module features a range of EAW’s most innovative line array technologies within a mobile, light weight package that’s an ideal solution for a multitude of small- and medium-sized applications, including portable and installed A/V as well as musician/DJ systems. Incorporating constant curvature line array design principles, JFL210 modules form easily configured arrays with very predictable coverage that is both horizontally symmetric and consistent from short to long throws.The JFL210’s size, shape and weight are optimized for transport and set-up by one person. Side handles are integrated with the rigging system and are aligned with the enclosure’s center of gravity for superior balance and stability. Up to two JFL210s may be mounted on a loudspeaker stand with a 35 mm / 1.38 in diameter pole.  Dual-angle, integral pole mount holes allow the bottom enclosure to be aimed 0° or -15°.The JFL210’s ultra-strong rigging system has a 10:1 design factor, which meets or exceeds all standards enforced throughout the world. The rigging is simple to use – enclosures may be easily joined together by one person acting alone. For portable, flown applications the accessory FB121 Fly Bar will suspend up to six JFL210 and allow a wide range of array tilt angles to be readily achieved. The FB121 also doubles as a ground stack base for up to four JFL210s. Alternately, a pair of threaded M10 rigging points are available on the enclosure’s top and bottom panels for cost-sensitive permanent install applications.Users may switch between single- or bi-amp powering modes. An additional HF Shading switch is active in single-amp mode. It optimizes high frequency response for single-box or multi-box arrays, or inserts a correction filter for the high frequency air loss encountered in long throw applications. When the JFL210 is operated in bi-amp mode the HF Shading filters are applied in DSP.Dual Neutrik® Speakon® STX Series NL4 jacks are provided for system input. The STX Series’ all-metal housings are extremely rugged, and provide weather protection to IP54 when mated with a complementary STX Series cable connector. The powering mode and HF Shading switches are recessed and shrouded with a rubber boot for additional weather protection.While the JFL210 offers excellent performance with nearly any loudspeaker processor, its response can be optimized even more precisely with an EAW UX8800 4×8 digital processor. The UX8800 functions as an excellent overall system manager, processor and controller, while its Gunness Focusing alignment and driver processing algorithms dramatically enhance temporal performance.Overall construction matches the high standards long applied to EAW portable and touring products. Enclosures are protected by our tough, highly scratch-resistant RoadCoat™ finish and durable, foam-backed steel grilles protect the transducers while hiding them from view.Six year warranty.FEATURES• Constant curvature line array• Very easy to pole mount, fly and ground stack• Vertical arrays of up to six units may be constructed• High output capability and predictable pattern control2-WAY FULL-RANGE, 110° × 15°See NOTES TABULAR DATA for detailsCONFIGURATIONSubsystem: Transducer        Loading  LF  2 x 10 in cone        Vented  HF  1 x 1.4 in exit, 3 in voice      Horn-loaded  coil compression driverOperating Mode:  Amplifier Channels   External Signal Processing  Single-amp  LF/HF         High Pass Filter  Bi-amp  LF,HF      DSP w/2-way filtersPERFORMANCE Operating Range:   65 Hz to 18.5 kHzNominal Beamwidth:  Horz  110°  Vert  15°Axial Sensitivity (whole space SPL):       LF/HF  95 dB         65 Hz to 18.5 kHz  LF  95 dB          65 Hz to 971 Hz  HF  105 dB        708 Hz to 18.5 kHzInput Impedance (ohms):  Nominal   Minimum  LF/HF  8          6.5 @ 280 Hz  LF  8          10.9 @ 270 Hz  HF  8          9.6 @ 4470 HzHigh Pass Filter:    High Pass>=60 Hz, 12 dB/octave ButterworthAccelerated Life Test:  LF/HF  80 V          800 W @ 8 ohm  LF  80 V          800 W @ 8 ohm  HF  35 V          150 W @ 8 ohmCalculated Axial Output Limit (whole space SPL):  Average   Peak  LF/HF  124 dB        130 dB  LF  124 dB        130 dB  HF  127 dB        133 dBORDERING DATA        Description               Part NumberEAW JFL210 Black       0029139-90Optional AccessoriesEAW FB121 Fly Bar Black      0031170M10 x 1.5 Forged Shoulder Eyebolt     0029818
Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.comEAW products are continually improved.  All specifications are therefore subject to change without notice.  Part Number:  RD0480 (A) JFL210 September 2008JFL210 Specifications      group · JEastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.comEAW products are continually improved.  All specifications are therefore subject to change without notice.  Part Number:  RD0480 (A) JFL210 September 2008JFL210 Specifications      group · JENCLOSURE  Material  Baltic birch plywood  Finish  RoadCoat™ wear resistant textured black paint  Grille  Powder-coated perforated steelNOTE: This drawing has been reduced. Do not scale.123 4123 4ABCABCPRO ENGINEER0028400-CD-A_DWG_CLAMDRAWN:THE INFORMATION CONTAINEDHEREIN IS PROPRIETARY ANDCONFIDENTIAL PROPERTY OFLOUD TECHNOLOGIES, INC.ALL RIGHTS RESERVEDCHECKED:DES. ENG.MFG. ENG:APPROVALS DATEUNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN MILLIMETERSDUAL [INCHES] DIMENSIONS FOR REF ONLY TOLERANCE IN MILLIMETERSLINEAR ± 3.3 mm / ± 0.13 inANGLES ± 1° (X.XX) = REF DIMSNO TOLERANCE IMPLIED TSC = THEORETICAL SHARP CORNER DIMENSIONS ACROSS CENTERLINESTO BE SYMMETRICALSTATUS:REVISION:DRAWING NUMBER:THIRD ANGLE PROJECTIONONE MAIN STREET, WHITINSVILLE, MA 01588 USATITLE:SCALE:1        1LOUD Technologies Inc.213.68.41[ ]156.06.14[ ]239.39.42[ ]15.0397.215.64[ ]631.024.84[ ]216.98.54[ ]2X 24.8314.212.37[ ]173.56.83[ ]265.010.43[ ]493.019.41[ ] 2X 127.95.04[ ]175.06.89[ ]2X TSC301.411.86[ ]2X 537.021.14[ ]175.96.92[ ] 228.08.98[ ]2X 248.49.78[ ]2X TSC288.811.37[ ]APVD/DATEDESCRIPTIONREVSEE AGILERELEASED TO PRODUCTION FROMREV 2 PER DSRWH10052 SED 9/24/08A0028400-CD A           S. DESROSIERS 2/12/08ASHEET     OF  1 TO 12PRODUCTIONDWG CUSTOMER JFL210[MECHANICAL SPECIFICATION]NOTES:1. SYMBOL      INDICATES MOUNTING POINT,    M10 X 1.5 THREADED HOLE (PI ANGLE).2. SYMBOL      INDICATES CENTER OF BALANCE.3. WEIGHT APPROX. 23.6 kg [52 lb].4. SHIPPING WEIGHT APPROX. 26.8 kg [59 lb].JFL210FRONTGRILLEPARTIALLYSHOWNTOP2X STACK PAD ROUTSRIGHT SIDEDIMENSIONS APPLYTO BOTH SIDES2X HANDLESPROPRIETARYRIGGING SYSTEMINPUTBACKVIEW A-A2X STACK     PADS POLE MOUNT CUPSAA

Navigation menu