EAW JFL210 User Manual To The B8592667 9a3d 45d1 831e B6432d1ea0af

User Manual: EAW JFL210 to the manual

Open the PDF directly: View PDF PDF.
Page Count: 6

DownloadEAW JFL210 User Manual  To The B8592667-9a3d-45d1-831e-b6432d1ea0af
Open PDF In BrowserView PDF
JFL210

group · J

Specifications
2-Way full-range, 110° × 15°
See NOTES TABULAR DATA for details

Configuration
Subsystem:

Transducer

		

LF 2 x 10 in cone

		

HF 1 x 1.4 in exit, 3 in voice

Loading
Vented
Horn-loaded

coil compression driver
Operating Mode:
Amplifier Channels		
Single-amp LF/HF 			
Bi-amp LF,HF			

High Pass Filter
DSP w/2-way filters

PERFORMANCE

FEATURES
•
•
•
•

External Signal Processing

Operating Range: 65 Hz to 18.5 kHz

Constant curvature line array
Very easy to pole mount, fly and ground stack
Vertical arrays of up to six units may be constructed
High output capability and predictable pattern control

DESCRIPTION
The JFL210 compact line array module features a range of EAW’s most
innovative line array technologies within a mobile, light weight package
that’s an ideal solution for a multitude of small- and medium-sized
applications, including portable and installed A/V as well as musician/DJ
systems. Incorporating constant curvature line array design principles,
JFL210 modules form easily configured arrays with very predictable
coverage that is both horizontally symmetric and consistent from short to
long throws.

Nominal Beamwidth:
Horz 110°
Vert 15°
Axial Sensitivity (whole space SPL):					
LF/HF 95 dB 			
65 Hz to 18.5 kHz
LF 95 dB
HF 105 dB

		
		

Input Impedance (ohms):
		
Nominal			
LF/HF 8 			

65 Hz to 971 Hz
708 Hz to 18.5 kHz
Minimum
6.5 @ 280 Hz

LF 8

		

10.9 @ 270 Hz

HF 8

			

9.6 @ 4470 Hz

The JFL210’s size, shape and weight are optimized for transport and setup by one person. Side handles are integrated with the rigging system
and are aligned with the enclosure’s center of gravity for superior balance
and stability. Up to two JFL210s may be mounted on a loudspeaker
stand with a 35 mm / 1.38 in diameter pole. Dual-angle, integral pole
mount holes allow the bottom enclosure to be aimed 0° or -15°.

High Pass Filter:

The JFL210’s ultra-strong rigging system has a 10:1 design factor, which
meets or exceeds all standards enforced throughout the world. The
rigging is simple to use – enclosures may be easily joined together by
one person acting alone. For portable, flown applications the accessory
FB121 Fly Bar will suspend up to six JFL210 and allow a wide range of
array tilt angles to be readily achieved. The FB121 also doubles as a
ground stack base for up to four JFL210s. Alternately, a pair of threaded
M10 rigging points are available on the enclosure’s top and bottom
panels for cost-sensitive permanent install applications.

Calculated Axial Output Limit (whole space SPL):
		
Average			
Peak
LF/HF 124 dB 		
130 dB

Users may switch between single- or bi-amp powering modes. An
additional HF Shading switch is active in single-amp mode. It optimizes
high frequency response for single-box or multi-box arrays, or inserts a
correction filter for the high frequency air loss encountered in long throw
applications. When the JFL210 is operated in bi-amp mode the HF
Shading filters are applied in DSP.

EAW JFL210 Black				

High Pass>=60 Hz, 12 dB/octave Butterworth

Accelerated Life Test:
LF/HF 80 V

		

800 W @ 8 ohm

LF 80 V

		

800 W @ 8 ohm

HF 35 V

		

150 W @ 8 ohm

LF 124 dB

		

130 dB

HF 127 dB

		

133 dB

ORDERING DATA
Description

				

Part Number
0029139-90

Optional Accessories
EAW FB121 Fly Bar Black			
M10 x 1.5 Forged Shoulder Eyebolt

0031170
0029818

Dual Neutrik® Speakon® STX Series NL4 jacks are provided for system
input. The STX Series’ all-metal housings are extremely rugged, and
provide weather protection to IP54 when mated with a complementary
STX Series cable connector. The powering mode and HF Shading
switches are recessed and shrouded with a rubber boot for additional
weather protection.
While the JFL210 offers excellent performance with nearly any
loudspeaker processor, its response can be optimized even more
precisely with an EAW UX8800 4×8 digital processor. The UX8800
functions as an excellent overall system manager, processor and
controller, while its Gunness Focusing alignment and driver processing
algorithms dramatically enhance temporal performance.
Overall construction matches the high standards long applied to EAW
portable and touring products. Enclosures are protected by our tough,
highly scratch-resistant RoadCoat™ finish and durable, foam-backed
steel grilles protect the transducers while hiding them from view.
Six year warranty.

Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.

Part Number: RD0480 (A) JFL210

September 2008

EAW products are continually improved. All specifications are therefore subject to change without notice.

A

B

C

2X STACK
PADS

2X 248.4
[9.78]

2X 288.8
[11.37]
314.2
[12.37] TSC

2X 301.4
[11.86]
397.2 TSC
[15.64]

216.9
[8.54]

1

2

2

MFG. ENG:

SEE AGILE

APVD/DATE

3

Part Number: RD0480 (A) JFL210

ONE MAIN STREET, WHITINSVILLE, MA 01588 USA

175.0
[6.89]

4

A

B

PRO ENGINEER

A

REVISION:

1 TO 12

SCALE:

0028400-CD

SHEET 1 OF 1
DRAWING NUMBER:

A

DWG CUSTOMER JFL210
[MECHANICAL SPECIFICATION]

TITLE:

LOUD Technologies Inc.

JFL210

265.0
[10.43]

INPUT

2X 127.9
[5.04]

0028400-CD-A_DWG_CLAM

2/12/08

DATE

BACK

493.0
[19.41]

C

Specifications

TO BE SYMMETRICAL

S. DESROSIERS
CHECKED:

DRAWN:

STATUS: PRODUCTION
APPROVALS

THE INFORMATION CONTAINED
NO TOLERANCE IMPLIED
HEREIN IS PROPRIETARY AND
CONFIDENTIAL PROPERTY OF TSC = THEORETICAL SHARP CORNER DES. ENG.
LOUD TECHNOLOGIES, INC.
ALL RIGHTS RESERVED
DIMENSIONS ACROSS CENTERLINES

(X.XX) = REF DIMS

TOLERANCE IN MILLIMETERS
LINEAR ± 3.3 mm / ± 0.13 in
ANGLES ± 1°

UNLESS OTHERWISE SPECIFIED:
ALL DIMENSIONS ARE IN MILLIMETERS
DUAL [INCHES] DIMENSIONS
FOR REF ONLY

A

DESCRIPTION
RELEASED TO PRODUCTION FROM
REV 2 PER DSRWH10052 SED 9/24/08

4

NOTES:
1. SYMBOL
INDICATES MOUNTING POINT,
M10 X 1.5 THREADED HOLE (PI ANGLE).
2. SYMBOL
INDICATES CENTER OF BALANCE.
3. WEIGHT APPROX. 23.6 kg [52 lb].
4. SHIPPING WEIGHT APPROX. 26.8 kg [59 lb].

A

REV

3

2X HANDLES
PROPRIETARY
RIGGING SYSTEM

RIGHT SIDE

173.5
[6.83]
213.6
[8.41]

239.3
[9.42]

DIMENSIONS APPLY
TO BOTH SIDES

156.0
[6.14]

POLE MOUNT CUPS

175.9
228.0
[6.92]
[8.98]

A

15.0
GRILLE
PARTIALLY
SHOWN

2X 24.8

2X STACK PAD ROUTS

THIRD ANGLE PROJECTION

2X 537.0
[21.14]

FRONT

631.0
[24.84]

TOP

VIEW A-A

1

JFL210

group · J

Enclosure
Material Baltic birch plywood
Finish RoadCoat™ wear resistant textured black paint
Grille Powder-coated perforated steel

NOTE: This drawing has been reduced. Do not scale.

Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com

September 2008

JFL210

group · J

Specifications

Performance Data

See NOTES GRAPHIC DATA for details
Frequency Response: Single-amplified

LF = green, HF = black, Complete = blue

Single Box = green, Multi Box = orange, Long Throw = black

10

120

0

110

-10

100
dB (dB)
SPL
SPL

dB (dB)
SPL
SPL

Frequency Response: Processed Bi-amplified

-20

90

-30

80

-40

70

-50
10

100

1000

60

20000

10

100

Frequency (Hz)

1000

20000

Frequency (Hz)

Frequency Response: Unprocessed

Frequency Response: Digital Signal Processor

LF = green, HF = black, Complete = blue

LF = green, HF = black
20

110

10
dB re
re 0.775
0.775VVrms
rms
dB

120

dB SPL

SPL (dB)

100
90
80

-10
-20
-30

70
60

0

10

100

1000

-40
10

20000

Frequency (Hz)

100

1000

20000

Frequency (Hz)

Impedance Magnitude

Beamwidth (-6 dB SPL Points)

LF = green, HF = black, Complete = blue

Horizontal = orange Vertical = black

100

360

Degree

Degrees

Ohm
Ohms

100
10

10

1
10

100

1000

20000

Frequency (Hz)

1
100

1000

20000

Frequency (Hz)

Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.

Part Number: RD0480 (A) JFL210

September 2008

JFL210

Specifications

group · J

HORIZONTAL POLAR DATA

See NOTES GRAPHIC DATA for details

Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.

Part Number: RD0480 (A) JFL210

September 2008

JFL210

Specifications

group · J

VERTICAL POLAR DATA

See NOTES GRAPHIC DATA for details

Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.

Part Number: RD0480 (A) JFL210

September 2008

JFL210

group · J

Specifications

INPUT Panel

SIGNAL Diagram

SINGLE BOX

HF

HPF

AMP

XVR
LF

LONG THROW

HF SHADING

MULTI BOX

SINGLE-AMP

BI-AMP

OPERATING MODE

JFL210 = 24 KG / 52 LB
JFL210 RIGGING WORKING LOAD LIMIT (WLL): SIX (6)
JFL210 IN SUCCESSION. 144 KG / 312 LB
FAILURE TO FOLLOW MANUFACTURER’S
INSTRUCTIONS CAN RESULT
IN DAMAGE, INJURY, OR DEATH.

2-Way, Single-Amp (LF/HF)

2-Way, Bi-Amp (LF, HF)

AMP

HF

AMP

LF

SINGLE-AMP
800W @ 8
BI-AMP
LF: 800W @ 8
HF: 150W @ 8

BI-AMP

PIN 1
PIN 1
PIN 2
PIN 2

LF
LF
HF
HF

NC
NC

SINGLE-AMP

PIN 1
PIN 1
PIN 2
PIN 2

BI-AMP

PIN 1
PIN 1
PIN 2
PIN 2

LF
LF
HF
HF

NC
NC

PIN 1
PIN 1
PIN 2
PIN 2

SINGLE-AMP

DSP
EQ
DELAY
HPF/LPF

LEGEND
DSP:
HPF:
LPF:
LF/HF:
AMP:
XVR:

NOTES

User-supplied Digital Signal Processor.
High Pass Filter for crossover or Recommended High Pass Filter.
Low Pass Filter for crossover.
Low Frequency / High Frequency.
User-supplied Power Amplifier.
Passive LPFs, HPFs, and EQ integral to the loudspeaker.

TABULAR DATA
1. Measurement/Data Processing Systems: Primary - FChart: proprietary EAW software; Secondary - Brüel & Kjær 2012.
2. Microphone Systems: Earthworks M30; Brüel & Kjær 4133
3. Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep.
4. Measurement System Qualification (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %, precision +/-0.1 		
		 Hz, resolution the larger of 1.5 Hz or 1/48 octave; Time: accuracy +/-10.4 μs, precision +/-0.5 μs, resolution 10.4 μs; Angular: accuracy +/-1°, precision +/-0.5°, resolution 0.5°.
5. Environment: Measurements time-windowed and processed to eliminate room effects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted.
6. Measurement Distance: 7.46 m. Acoustic responses represent complex summation of the subsystems at 20 m. SPL is referenced to other distances using the Inverse Square Law.
7. Enclosure Orientation: For beamwidth and polar specifications, as shown in Mechanical Specification drawing.
8. Volts: Measured rms value of the test signal.
9. Watts: Per audio industry practice, “loudspeaker watts” are calculated as voltage squared divided by rated nominal impedance. Thus, these are not True Watt units of energy as defined
		 by International Standard.
10. SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL = 20 microPascals.
11. Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency.
12. Operating Mode: User selectable configurations. Between system elements, a comma (,) = separate amplifier channels; a slash (/) = single amplifier channel. DSP = Digital Signal Processor.
		 IMPORTANT: To achieve the specified performance, the listed external signal processing must be used with EAW-provided settings.
13. Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band
		 dips are excepted.
14. Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level.
15. Axial Sensitivity: Power averaged SPL over the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on 			
		 the geometric axis, referenced to 1 m.
16. Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range.
17. Accelerated Life Test: Maximum test input voltage applied with an EIA-426B defined spectrum; measured with recommended signal processing and Recommended Protection Filter.
18. Calculated Axial Output Limit: Highest average and peak SPLs possible during the Accelerated Life Test. The Peak SPL represents the 2:1 (6 dB) crest factor of the Life Test signal.
19. High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.

GRAPHIC DATA
1. Resolution: To remove insignificant fine details, 1/12 octave cepstral smoothing was applied to acoustic frequency responses and 1/3 octave cepstral smoothing was applied to the beamwidth and 		
		 impedance data. Other graphs are plotted using raw data.
2. Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance), 2.83 V (8 		
		 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m.
3. Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference.
4. Beamwidth: Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output first reaches -6 dB SPL referenced to 0 dB SPL as the highest level. This method
		 means the output may drop below -6 dB SPL within the beamwidth angle.
5. Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not be used to calculate True Watts (see 9 above).
6. Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.

Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.

Part Number: RD0480 (A) JFL210

September 2008



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:56
Create Date                     : 2008:09:25 13:54:33-07:00
Modify Date                     : 2008:09:25 13:54:45-07:00
Metadata Date                   : 2008:09:25 13:54:45-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.3)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12521 bytes, use -b option to extract)
Version ID                      : 1
Instance ID                     : uuid:b2644756-6d9c-f146-a3ee-bfb5f46cf5eb
Document ID                     : adobe:docid:indd:cf151817-81a0-11dd-a05f-f43b9e8ba5a7
Rendition Class                 : proof:pdf
Derived From Instance ID        : c700fe21-7a65-11dd-99ad-d6325fe0b54c
Derived From Document ID        : adobe:docid:indd:d4bd0c50-75ab-11dd-a151-9dc27b130641
Derived From Version ID         : 1
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:e5d8a5fc-8c7e-df47-aaac-5089c49c6a04, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:0183EDCFA581DD11A8BBF65B89F5C24F, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:75e73788-01fd-4cd9-a26d-466526f22272, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:FABB8330078BDD11A627C680905F6091, uuid:F8BB8330078BDD11A627C680905F6091, uuid:E17A3459DD8ADD11A627C680905F6091, uuid:F6BB8330078BDD11A627C680905F6091, uuid:DF7A3459DD8ADD11A627C680905F6091, uuid:DD7A3459DD8ADD11A627C680905F6091, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:790474E41187DD11A486D80FCEC03CB5, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:316F43B6E08ADD118117ABC75ACA3F59, uuid:3f6e5fc2-ee07-c148-9513-2f86f806db0f, uuid:af8a031c-0fa4-42a3-b941-e8bef11611da
Manifest Reference Document ID  : uuid:58AE884A6C76DD11A174F2019FB0533C, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:0083EDCFA581DD11A8BBF65B89F5C24F, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:7885101d-2c1b-4041-9a1e-3d87247e5f73, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:F9BB8330078BDD11A627C680905F6091, uuid:F7BB8330078BDD11A627C680905F6091, uuid:E07A3459DD8ADD11A627C680905F6091, uuid:E27A3459DD8ADD11A627C680905F6091, uuid:DE7A3459DD8ADD11A627C680905F6091, uuid:DC7A3459DD8ADD11A627C680905F6091, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:606135080287DD11A486D80FCEC03CB5, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:3C7F22FC1187DD11A486D80FCEC03CB5, uuid:BC0C5F7A9681DD119726F11F6600B2C9, uuid:458B93304D86DD119ECFA4BE6D574412
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 6
Creator                         : Adobe InDesign CS3 (5.0.3)
EXIF Metadata provided by EXIF.tools

Navigation menu