EC Electronics 8300A EC BT-8300 Bluetooth CCD Scanner User Manual
EC Electronics, Limited EC BT-8300 Bluetooth CCD Scanner
User Manual
Wireless Barcode Scanner (For 1D & 2D) USER MANUAL V2.0 User Manual For 1D&2D Wireless Scanner Introduction: This Wireless barcode scanner base in Bluetooth 2.0. Erognomically Designed,Flow linear appearance,Equipped with rechargeable base,3V battery,The batteries no memory function,It can be repeated charge,If the battery have not be used for a long time,power consumption will not be consumed,fully guarantee the stability of data. This wireless barcode scanner base in USB 3.0,It can transmit data in hight-speed。 This wireless barcode scanner have flash-rom,It can save data when the scanner not connect base station or terminal。 It can transmit 150m Hight-performance 1D or 2D scan engine,It can read barcode speedy。 Used ITT switch,it can be used 1000 million time。 Buit-in alarm by beep。 It can connect with Apple ,android and PC。 User Manual For 1D&2D Wireless Scanner Performance and parameters: Performance Scan speed: 500pcs/s resolution: 4mil light source: White LED Aiming light source: Red LED Scan view field: 360 Flashrom: 8M Transmission distance: 100m Bluetooth : Bluetooth 2.0 Working model: one-to-many or many-to-one battery: 1100mA interface: USB read elevation angle:+65 ,-65 read bevel angle:+60,-60 read error rate: 1/5000000 physics preference User Manual For 1D&2D Wireless Scanner Size: Scanner:180X70X80(mm) ;Base:125x125x50(mm) weight: scanner: 180g; base:150g cable length: 1.5m electrical parameters CMOS: 640x480 Input voltage: DC 5V,1000mA power: max 430mA environmental parameter work temperature: -40~+70 storage temperature: -40 ~+70 illumination: read in sun or lamp shork strength: 1.5m free-fall in floor safety approval electrcal: UL,UL60950-1,2 IP : IP54 environmental: ROHS,CE,FCC User Manual For 1D&2D Wireless Scanner User manual and attention: Befor use barcode scanner,please read this manual carefully This barcode scanner is wireless scanner,include scanner and base station,it be setted default by factory。 This manual barcode is setting barcode ,not test barcode,please don’t scan the barcode to test If you want to set other function ,please contact factory or agents。 Please handle with care。 If you want to get detailed manual ,pleas contact factory or agents。 User Manual For 1D&2D Wireless Scanner Reset to default: If this barcode scanner can not transmit data to base or terminal, you can scan below barcode(For 2D scanner) Reset (Set default) (enable transmite data) (transmite rate 9600) User Manual For 1D&2D Wireless Scanner Reset to default: If this barcode scanner can not transmit data to base or terminal, you can scan below barcode(For 1D scanner) Reset (Set default) (enable transmite data) (transmite rate 9600) User Manual For 1D&2D Wireless Scanner Instruction for Bluetooth pair mode Scanners pair with receiver base(both of our company) 1. Scan “Enter settings” 2. Scan”open a SPP channel” 3. Scan “disconnect previous connection 4. Scan”receiver MAC address code” 5. Scan “finished SPP Bluetooth setting” Many-to-one mode” scan the barcodes aboved orderly Scanners pair with any bluetooth Receiver(PC) 1) HID mode 1. Scan”Enter Settings” 2. Scan”open a Hid channel” 3. Scan”disconnect previous connection” 4. Scan “setting Bluetooth module as visible” 5. Scan” finished hid setting Search for Bluetooth pairing in the computer end,if the last connections is hid mode ,automatic reconnect with previous adapter after a restart User Manual For 1D&2D Wireless Scanner 2) 1. 2. 3. 4. Spp mode: scan”enter setting” scan”open spp channel” scan”disconnect previous connection” scan”setting Bluetooth modules as visible” 3) disconnect and reconnect function the module supports disconnect and reconnect function. Applies to the following conditions: power off,out of fange lead to the disconnect and the adapter unplugged: 1. power off: after a restart ,the module will automatically reconnect a paired adapter and keep the last connection working status:hid,spp 2. out of range leads to disconnect: re come within a reasonable distance,the module automatically reconnect the adapter. 3. The adapter unplugged:module automatically ,searches adapter,when you plug the adapter,it will automatically reconnect successfully .need an adapter plugged into the same computer. User Manual For 1D&2D Wireless Scanner 4. The default password is:0000 5. Mobile end paired same as pc terminal only need scan”open randomcodes configuration automatically “ and “open random codes quick.paired’. Enter setting Disconnect previous connect User Manual For 1D&2D Wireless Scanner Open a HID channel Open a SPP channel User Manual For 1D&2D Wireless Scanner Setting Bluetooth module as visible Auto reconnection User Manual For 1D&2D Wireless Scanner Finished HID Bluetooth settings Finished spp Bluetooth settings User Manual For 1D&2D Wireless Scanner Open random codes confirmation automatically Open random code Quick paired User Manual For 1D&2D Wireless Scanner Bluetooth receiver languages setting USA UK User Manual For 1D&2D Wireless Scanner Bluetooth receiver languages setting France Italy User Manual For 1D&2D Wireless Scanner Belgium Germany User Manual For 1D&2D Wireless Scanner spain Turkey-f WIRELESS BARCODE SCANNER USER MANUAL (VER 2.0) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 24 Language : zh-CN Tagged PDF : Yes Author : apple Creator : Microsoft® Office Word 2007 Create Date : 2016:01:20 07:35:47 Modify Date : 2016:01:20 07:35:47 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools