08_User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2434166 |
| Application ID | uZnfcfHSMHvxMq6CY3aMUw== |
| Document Description | 08_User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 403.3kB (5041296 bits) |
| Date Submitted | 2014-11-03 00:00:00 |
| Date Available | 2014-11-03 00:00:00 |
| Creation Date | 2014-10-10 17:18:35 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2014-10-10 17:18:35 |
| Document Title | ELAD FDM-DUO User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | ELAD-UT82 |
ELAD FDM-DUO Dual Mode SDR Transceiver USER MANUAL www.eladit.com ELAD FDM-DUO User Manual Rev 1.04 10/2014 1 Index FDM-DUO Overview.............................................................................................................................. 4 2.1 Notice ............................................................................................................................................ 4 2.2 Firmware versions ......................................................................................................................... 4 2.3 Introduction .................................................................................................................................. 4 2.3.1 Main Features ....................................................................................................................... 4 2.3.2 FDM-DUO Block Diagram ...................................................................................................... 5 2.4 Precautions ................................................................................................................................... 6 Front Panel Description ........................................................................................................................ 7 3.1 Rear Panel Description .................................................................................................................. 8 LCD ...................................................................................................................................................... 10 Quick Start........................................................................................................................................... 11 5.1 Receive ........................................................................................................................................ 11 5.2 Transmit ...................................................................................................................................... 12 User Interface ..................................................................................................................................... 13 6.1 VFO Mode ................................................................................................................................... 13 6.1.1 Receive ................................................................................................................................ 13 6.1.2 Antenna Tuning Mode ........................................................................................................ 16 6.1.3 Transmit .............................................................................................................................. 17 6.2 MEM Mode ................................................................................................................................. 19 6.2.1 6.3 Knobs functions........................................................................................................................... 21 6.4 Keys functions ............................................................................................................................. 22 6.5 Microphone Keys functions ........................................................................................................ 22 6.6 Settings Menu List ....................................................................................................................... 23 6.6.1 Receive ................................................................................................................................ 19 Frequency offset menu ....................................................................................................... 25 CAT Remote Control ........................................................................................................................... 26 7.1 Introduction ................................................................................................................................ 26 7.2 Computer control commands ..................................................................................................... 26 7.3 FDM-DUO CAT commands list .................................................................................................... 27 7.3.1 Active commands table....................................................................................................... 27 7.3.2 Dummy commands table .................................................................................................... 30 Software & Driver Installation ............................................................................................................ 37 8.1 Software installation in Windows 8 Windows 7 and Windows XP ............................................. 37 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO 8.1.1 First-time install in Windows 8 and Windows 7 ................................................................. 37 8.1.2 First-time install in Windows XP ......................................................................................... 42 8.1.3 Update an existing software version .................................................................................. 46 8.2 User Manual Rev 1.04 10/2014 FDM-DUO USB driver .................................................................................................................. 47 8.2.1 FDM-DUO USB driver installation in Windows 8 and Windows 7 ...................................... 47 8.2.2 FDM-S2 USB driver installation in Windows XP .................................................................. 50 8.2.3 FDM-DUO USB sound card .................................................................................................. 61 8.2.4 FDM-DUO USB CAT Serial port............................................................................................ 62 Firmware update................................................................................................................................. 63 9.1 User interface firmware update ................................................................................................. 63 9.2 RX demodulator and TX modulator firmware update ............................................................... 65 9.2.1 RX demodulator firmware update ...................................................................................... 66 9.2.2 TX modulator firmware update .......................................................................................... 67 9.3 USB interface firmware update .................................................................................................. 68 9.4 FPGA DDC update ....................................................................................................................... 68 Declaration of Conformity (EC) ................................................................................................................... 69 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO User Manual Rev 1.04 10/2014 2 FDM-DUO Overview 2.1 Notice Amateur radio regulations vary from country to country. Confirm your local amateur radio regulations and requirements before operating the ELAD FDM-DUO 2.2 Firmware versions The features described in this manual refers the following firmware versions RX Demodulator Ver: 1.04 Date: 09/18/2014 TX Modulator Ver: 1.03 Date: 09/18/2014 User Interface Ver: 3.03 Date: 09/18/2014 USB Interface Ver: 4.08 Date: 09/18/2014 FPGA Ver: 2.00 Date: 07/30/2014 2.3 Introduction Thank you for choosing the FDM-DUO. It is an innovative dual mode SDR transceiver covering the frequency range from 9kHz to 52MHz. The FDM-DUO can be used like a standard transceiver in standalone mode or connect to a PC to exploit the full potential of the ELAD FDM-SW2 software. 2.3.1 Main Features Frequency range: RX 9kHz to 52MHz direct sampling receiver TX 160m to 6m Selectable power output 5W on Ham Bands or 0dBm RF Out connector Double antenna connectors (RTX or separate RX/TX) Operating Modes: CW LSB USB AM ADC Linear LTC2165,16bit @122.88MHz DDC FPGA Spartan 6 XC6SLX25 + Serial Flash for stand-alone mode Stand-alone RX demodulator with STM32F4 ARM floating point μController LPC1766 Cortex M3 for LCD & Keyboard control TX modulator with STM32F4 floating point μP + AD9957 DDS @368.64 MHz Clocking source Si5338 driven by 10MHz TCXO or External reference input TX modulator from I2S source: MIC using Cirrus CS5346 or USB integrated Codec (CM6510B codec with customized firmware) CAT USB interface with FTDI controller © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO 2.3.2 User Manual Rev 1.04 10/2014 FDM-DUO Block Diagram © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO User Manual Rev 1.04 10/2014 2.4 Precautions Connect the transceiver only to a power source described in this manual. Take care when plugging in cables, avoid applying sideways pressure that might damage the connectors Avoid operating in wet conditions. For better performance and safety, connect the transceiver to goof earth ground using a short, heavy, braided cable. Ground all outdoor antennas for this receiver using approved methods. Grounding helps protect against voltage surges caused by lightning. It also reduces the chance of build-up of static charge. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO User Manual Rev 1.04 10/2014 3 Front Panel Description 1 - LCD Display See LCD. 2 - E1 Knob Audio volume , AGC, noise reduction, noise blanker control. Knobs functions 3 - Main Knob Main VFO and MEM control. See Knobs functions 4 - Speaker/Headphones Audio Output The main FDM-DUO audio output. 5 - Auxiliary Output Audio /IQ data output. 6 - E2 Knob Filter and pitch control. See Knobs functions 7 - MODE and MENU buttons Change operating mode and enter the FDM-DUO setup menu. See Keys functions 8 - VFO and MEM buttons Basic VFO Memory operations. See Keys functions © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO User Manual Rev 1.04 10/2014 3.1 Rear Panel Description 1 - USB Receiver Data Connector USB 2.0 port to connect with the PC. Please use the supplied cable. 2 - Frequency Reference Input SMA 50 Ohm 10MHz, 0 dBm frequency reference input. 3 - RF Output Connector SMA 50 Ohm 0 dBm TX output. 4 - RTX/TX Antenna Connector M-type RTX/TX 50 Ohm antenna connector. 5 - RX Antenna Connector M-type RX 50 Ohm antenna connector. 6 - PTT Output Connector PTT Output to connect a switch-box or an amplifier 7 - USB Audio Connector USB soundcard useful for digital modes 8 - CAT USB Serial Port USB serial port for CAT communication 9 - Power Switch Turn On/Off the FDM-DUO 10 - Power supply 13.8V, 2.5A DC power supply connector © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO User Manual Rev 1.04 10/2014 11 - Expansion Port DB9 connector for external hardware (eg pre-selector filters board). This is NOT a serial port. 12 - MIC/PTT input Compatible with the supplied microphone 13 – Key/Paddle input 3.5mm stereo jack connector. Can be used with any key or paddle If a paddle is connected, the CW LEFT and TIP can be configured as dot or dash in the CW LEFT and CW TIP settings menu. 14 – Ground Connector For better performance and safety, connect to an earth ground using a short, heavy cable. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. ELAD FDM-DUO User Manual Rev 1.04 10/2014 4 LCD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. LP: Low pass input filter active. ATT: input attenuation active. ANT 1 2: display the number of antennas. IN MIC USB: display the input selected for transmission in SSB and AM modes. Bar meter: in receiver mode displays the signal strength in S-units, in transmission mode displays the forward power transmitted. Measurements unit for the main display. The “S” of SWR is also used to indicate the “QuickStep” function. PK: blinks if the case of internal ADC overload. Secondary display: in receiver mode displays the signal strength, in transmission mode displays the forward power transmitted. Measurement unit for the secondary display. LOC: on when the Main Knob is locked. CAT: on when a CAT command is received, SERV: Service mode enabled. Operating mode. Input selection for CW mode. External frequency reference present. E2 Selected function. PITCH: CW pitch frequency, :Demodulation filter bandwidth. Main display. E1 Selected function. VOL: main volume, SQL: squelch, MIC: microphone gain, AGC: automatic gain control settings, NR: noise reduction, NB: noise blanker. Display the selected VFO. SET: settings menu mode, MEM: memory mode, VFO: VFO mode In memory mode, displays the selected memory index, in settings mode display the menu number RX: receive. TX: Transmit. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 10 ELAD FDM-DUO User Manual Rev 1.04 10/2014 5 Quick Start These instructions are intended only for a quick guide, detailed instructions are given later in this manual 5.1 Receive Turn on the FDM-DUO using the rear panel switch. The transceiver start in VFO mode with the VFO-A selected. Turn the E1 knob until you hear a suitable level of noise Use the Main knob to tune a frequency Press to select the desired communication mode Use the E2 to set the demodulation filter © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 11 ELAD FDM-DUO User Manual Rev 1.04 10/2014 5.2 Transmit Use the Main Knob to tune in a desired station or select an unused frequency Press and hold the key until enter in the Antenna Tuning Mode, the display change its back color Tune the antenna... Press and hold the key until return in the VFO mode Press microphone PTT and speak into the microphone, the display change its back color During the transmission use E1 to adjust the reception volume and E2 to adjust the power output © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 12 ELAD FDM-DUO User Manual Rev 1.04 10/2014 6 User Interface 6.1 VFO Mode 6.1.1 Receive The VFO mode is the default mode of FDM-DUO. Each VFO memorize the tuning frequency, mode and tuning step 6.1.1.1 Tuning In this mode, use the Main Knob to tune a frequency. A short pressure on the main knob enter the frequency step menu Use the main knob to modify the tuning step, then with a short pressure return in the VFO menu With a long pressure over the main knob, the Digit by Digit Frequency tuning mode is activated In this mode use the main knob to modify the selected digit and E1 or E2 to change witch digit you want to modify. Apply a short pressure on main knob to return in the standard tuning mode © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 13 ELAD FDM-DUO User Manual Rev 1.04 10/2014 6.1.1.2 E1 Receiver Settings Apply a short pressure on the E1 knob to change the E1 selected parameter, the selected parameter icon is turned on in the LCD. Turn until one click the E1 knob to display the parameter value, then turn again E1 to modify the parameter value. AGC: if the AGC is turned OFF (manual gain mode), the AGC icon blinks NR and NB: if the Noise Reducer or the Noise Blanker is turned on the relative NR or NB icon blinks. 6.1.1.3 E2 Receiver Settings Apply a short pressure on the E2 knob to change the E2 selected parameter, turn until one click the E1 knob to display the parameter value, then turn again E1 to modify the parameter value. 6.1.1.4 Switch VFO Use the button to switch VFO-A/B. 6.1.1.5 Store VFO to memory Use the key to store the current VFO settings into a memory Use E2 knob to select the destination memory and confirm with a short pressure on E2 6.1.1.6 “QuickMem” mode Keep pressed the key to enter the “QuickMem” mode. The memory channels 180 to 199 are reserved for the “QuickMem” selection. Keep pressed the key until the desired frequency appears on the LCD display, then release the key and the current VFO is set to the frequency and mode saved in the memory channel. You can use the “FDM-DUO Manager” feature in the ELAD FDM-SW2 software to customize the memory channels. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 14 ELAD FDM-DUO 6.1.1.7 VFO-A = VFO-B With long pressure on User Manual Rev 1.04 10/2014 key you get VFO-A = VFO-B 6.1.1.8 Change Operating Mode With a short pressure on the button, you can change the receiver mode between the available modes: LSB USB AM CW 6.1.1.9 “QuickStep” With a short pressure on the key, the “QuickStep” function is activated. This function quickly sets the frequency step preset selected in the “QuickStep” setting menu, press again the key to set the previous frequency step. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 15 ELAD FDM-DUO 6.1.2 User Manual Rev 1.04 10/2014 Antenna Tuning Mode In VFO or MEM mode, apply a long pressure on key to switch to the Antenna Tuning Mode In this mode a tone at the transmission frequency is generated. Use E2 to modify the transmission power. The antenna tuning mode have a default timeout of 10s, this value can be modified in the settings menu 50 “TUNE TIME”. However you can apply a long pressure on key to exit from the antenna tuning mode. Note: The timeout is not active if: The transmission selected transmission output is set to 0dBm The “SERVICE MODE” is active © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 16 ELAD FDM-DUO 6.1.3 User Manual Rev 1.04 10/2014 Transmit During the transmission some operations like tuning, VFO selection, mode selection are locked. With a short pressure on the E2 knob it is possible to change witch parameter is shown in the main display. 6.1.3.1 Transmission in CW mode 6.1.3.1.1 CW Message To begin to transmit the CW message selected in the “CW message menu”, keep pressed the microphone PTT and press the CW key. With a long pressure on if the function has been activated in the “F4 Function” menu, the selected CW message is transmitted. Push the PTT to terminate the CW message transmission 6.1.3.1.2 E1 transmitter settings Apply a short pressure on the E1 knob to the Reception Volume or the CW Words Per Minute parameter. Turn until one click the E1 knob to display the parameter value, then turn again E1 to modify the parameter value. 6.1.3.1.3 E2 transmitter settings Use E2 to change the transmission power © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 17 ELAD FDM-DUO 6.1.3.2 User Manual Rev 1.04 10/2014 Transmission in AM and SSB mode 6.1.3.2.1 E1 transmitter settings Apply a short pressure on the E1 knob to the Reception Volume or microphone gain parameter. Turn until one click the E2 knob to display the parameter value, then turn again E2 to modify the parameter value. 6.1.3.2.2 E2 transmitter settings Use E2 to change the transmission power © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 18 ELAD FDM-DUO User Manual Rev 1.04 10/2014 6.2 MEM Mode 6.2.1 Receive To activate the memory mode, apply a long pressure on the button 6.2.1.1 Select and edit a memory Use the main knob to select a memory. Apply a long pressure on the main encoder to enter the edit memory menu. In this menu it is possible to modify the selected memory frequency in digit by digit mode. Use the button to select the VFO-A/B. This is useful if you want to set the memory settings to a specific VFO. 6.2.1.2 Delete a memory Apply a long pressure to the key to enter the delete menu. Use the E2 knob to set yes or no and make a short pressure on E2 to confirm. 6.2.1.3 Set memory to VFO Use the key to set the selected VFO to the selected memory frequency and mode. When this function is used, the FDM-DUO automatically switches to the VFO mode © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 19 ELAD FDM-DUO User Manual Rev 1.04 10/2014 6.2.1.4 Change the memory display mode Apply a short pressure on the key to show the memory label in the LCD main display. Press shortly again to return to display the memory frequency. You can use the “FDM-DUO Manager” feature in the ELAD FDM-SW2 software to customize the memory channels. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 20 ELAD FDM-DUO User Manual Rev 1.04 10/2014 6.3 Knobs functions The following table describes the knob functions for each user interface menu Mode/Menu VFO Action Main Knob E1 Knob E2 Knob Value modified Change selected VFO frequency Short Pressure Enter STEP menu Enter E1 selection parameter Change E1 selected parameter Enter E2 selection parameter Change E2 selected parameter Modify E1 selected parameter value Change E1 selected parameter Modify E2 selected parameter value Change E2 selected parameter Modify E1 selected parameter value Change E1 selected parameter Modify E2 selected parameter value Change E2 selected parameter Modify E1 selected parameter value Change E1 selected parameter Modify E2 selected parameter value Change E2 selected parameter Long Pressure STEP Value modified Short Pressure Long Pressure Value modified MEM Short Pressure Long Pressure Value modified E1 Selection: VOL - AGCNR - NB Short Pressure Long Press Value modified E2 Selection: FILTER - PITCH Short Pressure Long Pressure Value modified VFO > MEM Delete MEM Change the destination memory Save VFO in the selected memory Long Pressure Value modified Short Pressure Long Pressure Change Yes/No Confirm Yes/No Parameter large step variation (1) Short Press Long Pressure Value modified DIGIT by DIGIT Tuning Enter the menu to change the selected memory frequency Back to VFO or MEM menu Back to VFO or MEM menu Switch to digit by digit tuning mode Back to VFO or MEM menu Back to VFO or MEM menu Switch to digit by digit tuning mode Change the destination memory Short Press Value modified SETUP Switch to DIGIT by DIGIT tuning mode Change tuning step value Exit from STEP Menu Switch to DIGIT by DIGIT tuning mode Select next/previous memory Short Pressure Long Pressure Modify the current digit value Switch to standard tuning mode Change digit selection Change digit selection Switch to standard tuning mode (2) Switch to standard tuning mode (2) © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 21 ELAD FDM-DUO User Manual Rev 1.04 10/2014 (1) Available only for certain menu (2) Press simultaneously E1 and E2 to lock/unlock all the keys and knobs 6.4 Keys functions The following table describes the keys functions. Mode Pressure VFO Short Switch VFO VFO Long Switch to MEM mode Enter VFO to MEM menu Enter “QuickMem” menu MEM Short Switch VFO MEM Long Switch to VFO mode Enter delete memory menu Change operating mode Enable/disable Quickstep function Enter settings menu VFO A = B Enter/Exit antenna tuning mode F4 Selected Function Lock/Unlock the main knob Change memory display frequency/label Enter settings menu F4 Selected Function Lock/Unlock the main knob Selected memory to VFO Change selected memory operating mode Enter/Exit antenna tuning mode 6.5 Microphone Keys functions The following table describes the microphone keys functions. Mode Pressure VFO Short VFO Keep pressed MEM Short MEM Keep pressed UP UP Keep pressed Tune up frequency of one step After HOLDTIME tune up the frequency according with the acceleration Selected memory to VFO Selected memory to VFO and after HOLDTIME tune up the frequency according with the acceleration DOWN DOWN Keep pressed Tune down frequency of one step After HOLDTIME tune down the frequency according with the acceleration Selected memory to VFO Selected memory to VFO and after HOLDTIME tune down the frequency according with the acceleration © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 22 ELAD FDM-DUO User Manual Rev 1.04 10/2014 6.6 Settings Menu List The following table describes the FDM-DUO settings menu list. To enter the settings menu mode, press the key. Use E2 to select the menu, then apply a short pressure on E2 to display the current menu setting, if you want to change the setting use the E2 knob and confirm the setting with a short pressure on E2 Menu Title RX ATT RX LP SNAP AGC TH AUX VOL QUICKSTEP Description Receiver input attenuation Receiver low pass filter status Round to step AGC Threshold Auxiliary output volume Step selected for the “QuickStep” mode CW MUTE xSB MUTE 10 FILBYPASS 11 30 31 32 TONE VOL TX ENABLE ANTENNAS TX IN Set mute status during CW transmission Set mute status during AM or SSB transmission Set pre-selection filters bypass, active only in reception in remote/mixed mode and in split mode Sidetone volume Enable the transmission Number of antenna used Transmission input in AM and SSB 33 TXOUT Transmission output selection 34 TX POWER Transmission power selection 35 TX BW Transmission filter selection Available Settings OFF or ON OFF or ON OFF or ON From 0 to 10 From 0 to 100 1Hz, 5Hz, 10Hz, 25Hz, 50Hz, 100Hz, 250Hz, 500Hz, 1kHz, 2kHz, 3kHz, 4.5kHz, 5kHz, 7.5kHz, 9kHz, 10kHz, 12.5kHz, 25kHz, 50kHz, 100kHz, 125kHz, 250kHz, 500kHz, 1MHz OFF or ON Default OFF ON ON 50 1kHz OFF or ON ON OFF or ON OFF From 0 to 100 OFF or ON 1 or 2 Microphone or USB soundcard PWR (ant. RTX) or 0dBm (RFOUT) 0.3W, 0.5W, 1W, 1.2W, 1.5W, 2W, 3W, 4W, 5W or max available 50Hz - 4000Hz 100Hz - 2700Hz 100Hz - 3000Hz 100Hz - 3500Hz 100Hz - 4000Hz 200Hz - 2700Hz 200Hz - 3000Hz 200Hz - 3500Hz 200Hz - 4000Hz 300Hz - 2700Hz 300Hz - 3000Hz 300Hz - 3500Hz 300Hz - 4000Hz ON Microphone OFF PWR 5W 100Hz - 2700Hz © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 23 ELAD FDM-DUO User Manual Rev 1.04 10/2014 36 MIC GAIN Microphone Gain ±12dB in step of 0.5dB 0dB 37 CW IN CW transmission input selection Key or Paddle Key 38 39 CW DELAY CW KEY 0 to 1000ms TIP or RING 240ms TIP 40 CW TIP DOT or DASH DASH 41 42 43 44 CW IAMBIC CW RX WPM TX RX TH CW DECODE A or B 5 to 90 words per minute AUTO or from 1 to 10 OFF or ON 12 AUTO OFF 45 46 47 CW TX WPM CW MSG TX VIEW UP/DOWN ACC 5 to 90 words per minute Msg 1 to Msg 10 Frequency, forward power, reflected power, SWR 1, 2, 3 10 Msg 1 Forward power 48 49 TUNE TIME 10 to 120 seconds 10s 50 60 ATT ON TX FR OFFSET OFF or ON OFF or ON OFF OFF 61 OFS VALUE PTT release delay in CW Select where the key is connected on the key/paddle jack Select the dot or dash on the tip of the key/paddle jack Set the iambic mode CW characters decoding speed CW threshold for a tone recognition Enable/Disable the automatic CW decoding CW transmission speed CW Message selection Select the default parameter to be displayed during a transmission MIC UP / DOWN acceleration of the microphone buttons Antenna tuning mode timeout. Active only if the selected transmission output is the antenna. Not active in service mode Attenuation in transmission mode Enable / Disable the frequency offset for the visualization Frequency offset value for the visualization +/- 99.999999999 GHz. See * 0Hz 62 F4 Button CAT BAUD 71 72 80 81 82 HOLD TIME REPT TIME SERVICE DEFAULT UI UPDATE None / Send CW Message / Split mode 9600, 38400, 57600, 115200 From 500 to 2500ms From 100 to 1500ms ON or OFF YES or NO YES or NO None 70 Select the F4 key function when a long pressure is applied CAT serial port baud rate 83 84 VIEW SN VIEW FW Firmware UI Hold time to detect a long pressure Repetition time when a key is pressed Enable Service mode Restore default parameters If Service mode is active, enable the firmware update mode Display the FDM-DUO serial number Display the FDM-DUO firmware versions 38400 1000ms 600ms OFF NO NO © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 24 ELAD FDM-DUO 6.6.1 User Manual Rev 1.04 10/2014 Frequency offset menu The Frequency offset set in digit by digit mode with some improvements to set a signed 10 digit offset in a 9 digit display. E2: Select the digit to modify Main encoder: modify the selected digit value E1: change the visualization o kHz: the 8 most significant digit of the frequency offset are displayed o Hz: the 8 least significant digit of the frequency offset are displayed E1 or Main encoder short pressure: change the sign of the offset (+/-) E2 short pressure: save the setting EXAMPLES: Frequency offset value: +10,000,034,120 Hz kHz Display mode Hz Display mode © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 25 ELAD FDM-DUO User Manual Rev 1.04 10/2014 7 CAT Remote Control 7.1 Introduction The FDM-DUO transceiver uses a full-duplex, asynchronous, USB serial interface for communicating through the USB CAT port. Each data is constructed with 1 start bit, 8 data bits, 1 stop bit, no parity is used (8N1). The baud rate is selectable in the [40] CAT BAUD menu. Available values are 9600, 38400, 57600, 115200 bps. The FDM-DUO implement a subset of the Kenwood TS-480 command set. Some command have a dummy implementation for compatibility issues with Ham Radio Deluxe. 7.2 Computer control commands A computer control command is composed of an alphabetical command, various parameters, and the terminator that signals the of the command. For example to set the VFO-A to 14MHz the command is: FA00014000000; “FA”: alphabetical command “00014000000000”: parameter “;”: terminator Computer control commands can be classified as shown below: SET Input PC->FDM-DUO Computer control commands (set a parameter) READ (read a condition) Output ANSWER FDM-DUO->PC (transmit a condition) EXAMPLE To set the VFO-A to 14MHz the PC sends: “FA00014000000000;” SET command To read the VFO-A frequency the PC sends: “FA;” READ command When this command has been sent, the following message is returned to the PC: “FA00014000000000;” ANSWER © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 26 ELAD FDM-DUO User Manual Rev 1.04 10/2014 7.3 FDM-DUO CAT commands list 7.3.1 Active commands table FA Set Read Answer Reads and sets the VFO A frequency 11 P1 P1 12 P1 P1 FB Set Read Answer Read Answer P1 14 P1 15 P1 16 P1 17 P1 18 P1 19 10 P1 20 10 P1 P1 P1 P1 P1 P1 10 P1 10 Reads and sets the VFO B frequency 11 P1 P1 FR Set P1 13 P1 P1 P1 12 P1 P1 P1 13 P1 P1 P1 P1 14 P1 15 P1 16 P1 17 P1 18 P1 19 10 P1 20 10 P1 P1 P1 P1 P1 P1 10 P1 10 Selects or reads the receiver VFO or M.CH mode P1 P1 10 10 10 FT Selects or reads the transmitter VFO or M.CH mode Set Read Answer P1 P1 10 10 10 Parameters: P1: Frequency in Hz (11 digit) Parameters: P1: Frequency in Hz (11 digit) Parameters: P1 0: VFO-A 1: VFO-B 2: M.CH Parameters: P1 0: VFO-A 1: VFO-B 2: M.CH © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 27 ELAD FDM-DUO User Manual Rev 1.04 10/2014 IF Retrieves the transceiver status Set 10 Read 11 P1 21 P3 31 12 P1 22 P3 32 P1 13 P1 23 P3 33 10 P1 14 P2 24 P4 34 P1 15 P2 25 P5 35 P1 16 P2 26 P6 36 P1 17 P2 27 P7 37 P1 18 P2 28 P7 38 P1 19 P3 29 P8 39 10 P1 20 P3 30 P9 40 P10 P11 P12 P13 P14 P14 P15 Answer MC Set Read Answer Recalls or reads the Memory channel MD Set Read Answer P1 P1 P2 P2 10 10 P2 P1 10 Recalls or reads the operating mode status P1 P1 10 10 10 Parameters: P1: Frequency 11 digit P2: 5 spaces P3: Always 0 P4: Always 0 P5: Always 0 P6: Always 0 P7: Memory ch. Number 0-99 P8: 0:Rx 1:Tx P9: Operating Mode (See MD) P10: See FR, FT P11: Always 0 P12 0:Normal 1:Split P13: Always 0 P14: Always 0 P15: Space Parameters: P1: 0 or 1 P2: 00 to 99 Parameters: P1: 1: LSB 2: USB 3: CW 5: AM © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 28 ELAD FDM-DUO User Manual Rev 1.04 10/2014 MR Set Read Answer Reads the Memory channel data 10 11 P4 21 P8 31 P10 41 12 P4 22 P8 32 P10 42 P1 P1 13 P4 23 P9 33 P10 43 P2 P2 14 P4 24 P9 34 P10 44 P3 P3 15 P4 25 P10 35 P10 45 P3 P3 16 P4 26 P10 36 P10 46 10 P4 17 P4 27 P10 37 P10 47 P4 18 P5 28 P10 38 P10 48 P4 19 P6 29 P10 39 P11 49 10 P4 20 P7 30 P10 40 P12 50 P15 P16 P16 P16 P16 P16 P16 P16 P16 MW Set Read Answer Store the data to the Memory channel 11 P4 21 P8 31 P10 41 P15 12 P4 22 P8 32 P10 42 P16 P1 13 P4 23 P9 33 P10 43 P16 P2 14 P4 24 P6 34 P10 44 P16 P3 15 P4 25 P10 35 P10 45 P16 P3 16 P4 26 P10 36 P10 46 P16 P4 17 P4 27 P10 37 P10 47 P16 P4 18 P5 28 P10 38 P10 48 P16 P4 19 P6 29 P10 39 P11 49 P16 10 P4 20 P7 30 P10 40 P12 50 10 10 RX Set Read Answer Sets the receiver function status 10 10 P1 10 P1 10 10 P2 10 TX Set Read Answer Sets or reads the TF-SET function status P1:0 P2: 0 P3: 00 to 99 Memory No. P4: Frequency (11 digit) P5: Mode P6: Always 0 P7: Always 0 P8: Always 0 P9: Always 0 P10: Memory label, last 14 chars P11: Always 0 P12: Always 0 P13: Always 000000000 P14: Step size P15: Memory status B: used F: free P16: Memory label, first 8 chars P1:0 P2: 0 P3: 00 to 99 Memory No. P4: Frequency (11 digit) P5: Mode P6: Always 0 P7: Always 0 P8: Always 0 P9: Always 0 P10: Memory label, last 14 chars P11: Always 0 P12: Always 0 P13: Always 000000000 P14: Step size P15: Memory status B: used F: free P16: Memory label, first 8 chars Parameters: P1: Always 0 Parameters: P1 0 P2 0 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 29 ELAD FDM-DUO 7.3.2 User Manual Rev 1.04 10/2014 Dummy commands table The following commands have a dummy implementation. AC Set Read Answer AG Set Read Answer AI Set Read Answer AN Set Read Answer BC Set Read Answer Sets or reads the internal antenna tuner status DUMMY IMPLEMENTATION P1 P1 P1 10 10 P1 P2 10 Sets or reads the AF gain DUMMY IMPLEMENTATION P2 10 10 P2 P2; 10 Sets or reads the Auto Information (AI) function ON/ OFF DUMMY IMPLEMENTATION P1 P1 P1 P1 10 10 10 Parameters: P1: Always 1 10 10 10 Sets or reads the Beat Canceller function status DUMMY IMPLEMENTATION Parameters: P1: Always 0 P2: Always 000 Parameters: P1: Always 0 Selects the antenna connector ANT1/ ANT2 DUMMY IMPLEMENTATION Parameters: P1: Always 00 P2: Always 0 Parameters: P1: Always 0 10 10 10 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 30 ELAD FDM-DUO BY Set Read Answer CA Set Read Answer CN Set Read Answer CT Set Read Answer DL Set Read Answer EX Set Read Answer User Manual Rev 1.04 10/2014 Reads the busy signal status DUMMY IMPLEMENTATION P1 10 10 P2 10 Sets and reads the CW Auto Zero-beat function status DUMMY IMPLEMENTATION P1 P1 P1 10 10 10 Parameters: P1: Always 00 10 10 P1 10 Sets and reads the CTCSS function status DUMMY IMPLEMENTATION Parameters: P1: Always 0 Sets and reads the CTCSS tone number DUMMY IMPLEMENTATION Parameters: P1: Always 0 10 10 10 Sets and reads the Digital Noise Limiter (DNL) function status DUMMY IMPLEMENTATION 10 P1 10 P2 P2 10 Sets or reads the Extension Menu DUMMY IMPLEMENTATION 11 P5 12 P1 P1 13 P1 P1 14 P1 P1 15 Parameters: P1: Always 0 P2: Always 0 10 P2 P2 16 P2 P2 17 P3 P3 18 P4 P4 19 10 10 P5 20 Parameters: P1: Always 0 P2: Always 00 Parameters: P1: 000 - 060: Menu No. P2: Always 00 P3: Always 0 P4: Always 0 P5: Always 0 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 31 ELAD FDM-DUO User Manual Rev 1.04 10/2014 FS Selects or reads the Fine Tuning function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 FW Selects or reads the DSP filtering bandwidth Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 P1 10 GT Selects or reads the DSP filtering bandwidth Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 10 IS Sets and reads the IF SHIFT function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P2 P2 P2 P2 10 KS Sets and reads the CW electric keyer’s keying speed Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 10 MF Sets or reads Menu A or B Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 Parameters: P1 Always 0 Parameters: P1 Always 0000 Parameters: P1 Always 000 Parameters: P1: “+” P2: Always 0000 Parameters: P1: 010 Parameters: P1: Always 0 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 32 ELAD FDM-DUO User Manual Rev 1.04 10/2014 MG Sets or reads the Microphone gain status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 10 NB Set or reads the Noise Blanker (NB) function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 NL Set or reads the NB (Noise Blanker) level Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 10 NR Sets or reads the Noise Reduction (NR) function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 PA Sets or reads the pre-amplifier function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P2 10 PC Sets or reads the output power Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 10 Parameters: P1: Always 000 Parameters: P1: Always 0 Parameters: P1: Always 0 Parameters: P1: Always 0 Parameters: P1: Always 0 P2: Always 0 Parameters: P1: Always 005 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 33 ELAD FDM-DUO User Manual Rev 1.04 10/2014 PR Sets or reads the Speech Processor function ON/ OFF Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 PS Sets or reads the Power ON/ OFF status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 QR Sets or reads the Quick Memory channel data Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P2 10 RA Sets or reads the Attenuator function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P2 P2 10 RG Sets or read the RF gain status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 10 RL Sets or reads the Noise Reduction level Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 Parameters: P1: Always 0 Parameters: P1: Always 1 Parameters: P1: Always 0 P2: Always 0 Parameters: P1: Always 00 P2: Always 00 Parameters: P1: Always 000 Parameters: P1: Always 0 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 34 ELAD FDM-DUO User Manual Rev 1.04 10/2014 SD Sets or reads the CW Break-in time delay Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 P1 10 SH Sets or reads the DSP filter settings Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 10 SL Sets or reads the DSP filter settings Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 10 SM Reads the S-meter status Set DUMMY IMPLEMENTATION Read Answer P1 P1 P2 10 10 P2 P2 P2 10 SQ Sets and reads the squelch level Set DUMMY IMPLEMENTATION Read Answer P1 P1 P2 10 10 P2 P2 10 TN Sets or reads the Tone frequency number Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 10 Parameters: P1: Always 0000 Parameters: P1: Always 00 Parameters: P1: Always 00 Parameters: P1: Always 0 P2: Always 0000 Parameters: P1: Always 0 P2: Always 0000 Parameters: P1: Always 00 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 35 ELAD FDM-DUO User Manual Rev 1.04 10/2014 TO Sets or reads the Tone function ON/ OFF Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 TS Sets or reads the TF-SET function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 VD Sets or reads the VOX delay time Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 P1 10 VG Sets or reads the VOX GAIN Set DUMMY IMPLEMENTATION Read Answer P1 10 10 P1 P1 10 VX Sets or reads the VOX function status Set DUMMY IMPLEMENTATION Read Answer P1 10 10 10 Parameters: P1: Always 0 Parameters: P1: Always 0 Parameters: P1: Always 0000 Parameters: P1: Always 000 Parameters: P1: Always 0 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 36 ELAD FDM-DUO User Manual Rev 1.04 10/2014 8 Software & Driver Installation 8.1 Software installation in Windows 8 Windows 7 and Windows XP 8.1.1 First-time install in Windows 8 and Windows 7 Double-click the file “setup.exe” in the CD . The windows installer first installs the prerequisites: Microsoft VC++ 2010 Runtime libraries Microsoft .NET Framework 4.0 (Only for Windows 7) and then the FDM-SW2 software. Click on “Accept” (Only for Windows 7) © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 37 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Click on “Install” Click on “Yes” Click on Install © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 38 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Microsoft Visual C++ 2010 x86 Redistributable installation is complete, click on “Finish” Click on “Yes” to start the installation of the .Net Framework 4.0 (Only for Windows 7) © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 39 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Click to “Next” to start the FDM-SW2 software installation Chose the installation folder, then click on “Next” © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 40 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Click on “Next” Click on “Yes” © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 41 ELAD FDM-DUO 8.1.2 User Manual Rev 1.04 10/2014 First-time install in Windows XP Double-click the file “setup.exe” in the installation folder. Click on “Accept” © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 42 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Click on “Install” Click on “Install” © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 43 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Click on Next to install the FDM-SW2 software Select the installation folder, then click on “Next” © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 44 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Click on “Next” The FDM-SW2 Software installation is completed © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 45 ELAD FDM-DUO 8.1.3 User Manual Rev 1.04 10/2014 Update an existing software version Double click on file ELAD_FDM_SW2_V_x.xx.msi included in the update and follow the instructions. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 46 ELAD FDM-DUO User Manual Rev 1.04 10/2014 8.2 FDM-DUO USB driver 8.2.1 8.2.1.1 FDM-DUO USB driver installation in Windows 8 and Windows 7 First driver installation To install ELAD FDM-DUO driver, connect FDM-DUO USB RX port to a USB 2.0 socket on PC end power on the device. When Windows detects the new hardware, follow the steps listed below to install driver correctly: Open Control Panel from Start menu, select “System” and “Device Manager”. Expand “Other Devices” node: FDM-DUO. Select FDM-DUO, right click on it and execute “Update driver software”. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 47 ELAD FDM-DUO User Manual Rev 1.04 10/2014 When Windows starts the installation procedure, select the option “Browse my computer for driver software” (the second option). In the next dialog-box, insert the driver folder location using “Browse” button and check the option “Include subfolders”. In this way manual driver search is enabled For 32 bit system select the folder: C:\Program Files\ELAD\ELAD FDM-SW2\ELAD_FDM_Driver For 64 bit system select the folder: C:\Program Files (x86)\ ELAD\ELAD FDM-SW2\ELAD_FDM_Driver Then click “Next”. Click Install. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 48 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Let the hardware installation automatically completes and, at the procedure ending, click on “Close”; then disconnect and connect FDM-DUO device on the same USB socket. Now ELAD FDM-DUO USB driver is installed on your PC. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 49 ELAD FDM-DUO 8.2.2 8.2.2.1 User Manual Rev 1.04 10/2014 FDM-S2 USB driver installation in Windows XP First driver installation To install ELAD FDM-DUO driver, connect FDM-DUO USB RX port to a USB 2.0 socket on PC and power on the device. Windows XP detects the new hardware and starts the hardware installation wizard. Then, next steps to install FDM-DUO driver are listed below: At the first dialog box, select the last option “No, not this time” and “Next”. Select “Install from a list or specific location (Advanced)” and “Next”. In the next dialog-box, check the options “Search for the best driver in these location” and “Include this location in the search” to enable manual driver search. Clicking on “Browse”, select the path where the driver folder is located: Local Drive (C:) \Programs\ELAD\ELAD FDM-SW2\ELAD_FDM_Driver. Then click “Next”. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 50 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Let the hardware installation automatically completes and click on “Finish”; then disconnect and connect FDM- DUO device on the same USB socket. Now ELAD FDM- DUO driver is installed on your PC. 8.2.2.1 Driver installation verify in Windows 8 and Windows 7 To verify FDM-DUO driver current version, connect the device to USB socket (where the device driver is already installed) and power on the device. Then open Control Panel from Start menu. Click on “System” and select “Device Manager”. Expanding “ELAD Samplers” node, right click on “ELAD FDM-DUO” and select “Properties”. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 51 ELAD FDM-DUO User Manual Rev 1.04 10/2014 When dialog box opens, select “Driver” label: you must read provider name, current driver release date and current driver version. The figure shows an old FDM- DUO driver version. 8.2.2.2 Manual driver update To update FDM-DUO driver, connect the device to USB RX socket (where the device driver is already installed) and power on the device. Then open Control Panel from Start menu. Click on “System” and select “Device Manager”. Under “ELAD samplers” list select “ELAD FDM-DUO”, right click on it and execute “Update driver”. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 52 ELAD FDM-DUO User Manual Rev 1.04 10/2014 When Windows starts the installation procedure, select the last option “Browse my computer for driver software”. In the next dialog-box, disable the option “Include subfolders” and choose “Let me pick from a list of device drivers on my computer”. Don’t click “Next”. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 53 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Verify that “Show compatible hardware” option is checked and ELAD FDM-DUO is selected: then click on “Have a Disk”. In this way the manual driver update is enabled. Don’t click “Next”. Click on “Browse” and search for FDM-DUO driver update folder location; then open winusb_fdmsampler.inf file. Click “OK” and then “Next”. Let the hardware installation automatically completes and, at the procedure ending, click on “Close”; then disconnect and connect FDM-DUO device on the same USB socket. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 54 ELAD FDM-DUO User Manual Rev 1.04 10/2014 To verify that a correct update is done, enter “Device Manager” in Control Panel; under “ELAD samplers” label select ELAD FDM-DUO driver (see sub-chapter Driver installation verify in Windows 8 and Windows 7): right click on it and choose “Properties”: select “Driver” label to visualize the last driver version (an example is depicted in figure below). © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 55 ELAD FDM-DUO 8.2.2.3 User Manual Rev 1.04 10/2014 Driver installation verify in Windows Xp To verify FDM-DUO driver current version, connect the device to USB socket (where the device driver is already installed) and open Control Panel from Start menu. Click on “System” and select “Device Manager” under “Hardware” label. Expanding “ELAD Samplers” node, right click on “ELAD FDM-DUO” and select “Properties”. When dialog box opens, select “Driver” label: you must read provider name, current driver release date and current driver version. The old ELAD FDM-DUO driver version is shown in figure below as example. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 56 ELAD FDM-DUO 8.2.2.4 User Manual Rev 1.04 10/2014 Manual driver update in Windows Xp To update FDM-DUO driver, connect the device to USB socket (where the device driver is already installed) and power on the device. Then open Control Panel from Start menu. Click on “System” and select “Device Manager” under “Hardware” label. Select “ELAD FDM-DUO” from “ELAD Samplers” list, right click on it and execute “Update driver ” Now Windows XP launches the hardware update wizard: select the last option “No, not this time” and “Next”. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 57 ELAD FDM-DUO User Manual Rev 1.04 10/2014 At next step select “Install from a list or specific location (Advanced)” and “Next”. Then, disable all check-boxes that the system automatically sets and choose the last option for manual driver update, as depicted in figure. Select “Next”. Verify that “Show compatible hardware” option is checked and ELAD FDM-DUO is selected: then click on “Have a Disk”. Don’t click “Next”. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 58 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Click on “Browse” and search for the FDM-DUO driver update folder location; then open winusb_fdmsampler.inf file, as depicted in figure. Click “OK” and then “Next”. Now driver update starts: at next dialog box select “Continue Anyway” and ignore the warning. Let the hardware update automatically completes and, at the procedure ending, click on “Finish”; then disconnect e connect FDM-DUO device on the same USB socket. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 59 ELAD FDM-DUO User Manual Rev 1.04 10/2014 To verify that a correct update is done, enter “Device Manager” from Control Panel; under “ELAD Samplers” list, select ELAD FDM-DUO driver (see chapter Driver installation verify in Windows Xp) right click on it and choose “Properties”. Select “Driver” label to visualize the last driver version (an example is depicted in figure below). © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 60 ELAD FDM-DUO 8.2.3 User Manual Rev 1.04 10/2014 FDM-DUO USB sound card Connect the TX USB port of FDM-DUO to a USB 2.0 port of the PC and power on the device. Then open the PC device manager. No driver installation is required for this device, just expand the node Audio inputs and outputs and check the FDM-DUO audio device. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 61 ELAD FDM-DUO 8.2.4 User Manual Rev 1.04 10/2014 FDM-DUO USB CAT Serial port Connect the CAT USB port of FDM-DUO to a USB 2.0 port of the PC . Windows download and install automatically the FTDI FT232R serial port driver. When the installation process ends, open the windows device manager and check the FDM-DUO USB serial port in the node Ports (COM & LPT). © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 62 ELAD FDM-DUO User Manual Rev 1.04 10/2014 9 Firmware update The following section describes how to update the firmware of the various components of the FDMDUO. The latest versions for the User interface, Rx demodulator, Tx modulator, USB interface and FPGA are available here: http://sdr.eladit.com/FDM-DUO/Firmware Releases/. To ensure that the transceiver still working properly, please download the full update compressed archive named ELAD_FDM_DUO_Update_YYYY_MM_DD.zip (where YYYY_MM_DD are year, month and day of the release date). In this archive you can find the latest version of each firmware and also the latest version of the ELAD FDM-SW2 software. TO AVOID UPDATE ERRORS, PLEASE UPDATE THE “USER INTERFACE” FIRMWARE AFTER THE OTHERS FIRMWARE UPDATES 9.1 User interface firmware update Download the latest version of the UI firmware DISABLE ANY ANTIVIRUS PROGRAM BEFORE START THE FIRMWARE UPDATE In order to update the user interface (UI) firmware, you need to install the Flash Magic software. This program is available here: http://www.flashmagictool.com/ Turn on the ELAD FDM-DUO and connect the CAT USB serial port to a USB 2.0 port of your PC. Enable the FDM-DUO to perform a UI firmware update: Press the key and select the menu “60 SERVICE”. Press E2 to enter the setting, turn E2 to select ON then press E2 to store the setting. Go to menu “62 UI Update”. Press E2 to enter the setting, turn E2 to select YES then press E2 to store the setting. You need to identify the CAT USB COM port. Open the windows “Device Manager” and expand the COM port node. The CAT USB port is listed as “USB Serial Port”. In this case the CAT USB port is the COM19 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 63 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Run Flash Magic software. In the “Step 1 – Communication” section: Select LPC1766. COM Port: the CAT USB com port Baud Rate: 230400 Interface: None (ISP) In the “Step 2 – Erase” section: Check “Erase all Flash+Code Rd Prot” In the “Step 3 – Hex File” section: Click on Browse and select the update “.hex” file In the “Step 4 – Options” section: Check “Verify after programming Check the communication with the FDM-DUO. Click on ISP and click on “Read Device Signatures”. If the communication with the FDM-DUO is ok, a new windows with some device information is opened. If the communication is Ok, click on close and in the Flash Magic main window, click on Start to begin the programming. Wait until the end of the process, then turn off and restart the FDM-DUO. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 64 ELAD FDM-DUO User Manual Rev 1.04 10/2014 9.2 RX demodulator and TX modulator firmware update To update the RX demodulator and TX modulator firmware, you must remove the FDM-DUO top cover. Remove the four screws in the FDM-DUO chassis bottom as shown in the figure below. Then remove the top cover of the FDM-DUO © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 65 ELAD FDM-DUO 9.2.1 User Manual Rev 1.04 10/2014 RX demodulator firmware update Download the latest version of the RX demodulator firmware. Replace the file fdmduorx.bin in the USB pen provided with the FDM-DUO Connect the provided USB pen to the FDM-DUO RX Micro-USB programming port using the provided micro-USB adapter. Connect the power supply, keep pressed the Rx program mode button and power up the FDM-DUO. Keep pressed the Rx program mode button until the red led turns on. Release the Rx program mode button . Wait until the red led turns off. Turn off the FDM-DUO, disconnect the USB pen and restart the FDM-DUO. If during the firmware update the green leds are blinking quickly, it means that the programming process is failed. In this case contact the technical assistance. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 66 ELAD FDM-DUO 9.2.2 User Manual Rev 1.04 10/2014 TX modulator firmware update Download the latest version of the TX modulator firmware. Replace the file fdmduotx.bin in the USB pen provided with the FDM-DUO. Connect the provided USB pen to the FDM-DUO TX Micro-USB programming port using the provided micro-USB. Connect the power supply, keep pressed the TX program mode button and power up the FDM-DUO. Keep pressed the TX program mode button until the red led turns on. Release the TX program mode button. Wait until the red led turns off. Turn off the FDM-DUO, disconnect the USB pen and restart the FDM-DUO. If during the firmware update the green leds are blinking quickly, it means that the programming process is failed. In this case contact the technical assistance. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 67 ELAD FDM-DUO User Manual Rev 1.04 10/2014 9.3 USB interface firmware update Download the latest version of the USB interface Turn on the FDM-DUO and connect the USB Receiver data connector port to a USB 2.0 port of your PC. Disable any antivirus program before start the firmware update Run the downloaded file and wait until the end of the update process without disconnecting the USB cable or power off the FDM-DUO, then turn off and restart the FDM-DUO. 9.4 FPGA DDC update Download the latest version of the FPGA DDC. Turn on the FDM-DUO and connect the USB Receiver data connector port to a USB 2.0 port of your PC. Disable any antivirus program before start the firmware update Run the downloaded file and wait until the end of the update process without disconnecting the USB cable or power off the FDM-DUO, then turn off and restart the FDM-DUO. © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 68 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Declaration of Conformity (EC) The product marked as FDM-DUO manufactured by Manufacturer: ELAD S.r.l. Address: Via Col De Rust, 11 - Sarone 33070 CANEVA (PN) is produced in conformity to the requirements contained in the following EC directives: R&TTE Directive 1999/5/CE EMC Directive 2004/108/CE Low Voltage Directive 2006/95/CE The product conforms to the following Product Specifications: Emissions & Immunity: ETSI EN 301 489-1 V1.9.2 ETSI EN 301 489-15 V1.2.1 ETSI EN 301 783-2 V1.2.1 Safety: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 And further amendments. This declaration is under responsibility of the manufacturer: ELAD S.r.l. Via Col De Rust, 11 - Sarone 33070 CANEVA (PN) Issued by: Name: Function: Franco Milan President of ELAD Caneva Place th July, 30 2014 Date Signature © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 69 ELAD FDM-DUO User Manual Rev 1.04 10/2014 Declaration of Conformity (FCC) The product marked as FDM-DUO manufactured by Manufacturer: ELAD S.r.l. Address: Via Col De Rust, 11 - Sarone 33070 CANEVA (PN) complies with the following requirements: - FCC (Federal Communications Commission) Part 15 Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC ID: 2AAE5FDM-DUO This product is distributed in USA by: ELAD USA Inc. 7074 N RIDGE BLVD APT 3E CHICAGO , IL 606453586 USA Pho: 312-320-8160 © 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l. 70
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 70 Language : it-IT Tagged PDF : Yes Title : ELAD FDM-DUO User Manual Author : ELAD-UT82 Creator : Microsoft® Word 2010 Create Date : 2014:10:10 17:18:35+02:00 Modify Date : 2014:10:10 17:18:35+02:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools