ELITEGROUP COMPUTER SYSTEMS MPC Personal Computer User Manual ECS SI mPC 2

Download:
Mirror Download [FCC.gov]
Document ID	2818901
Application ID	prPLfNjll1oRuGERU+L9Rg==
Document Description	User Manual-Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	349.39kB (4367313 bits)
Date Submitted	2015-11-23 00:00:00
Date Available	2015-11-25 00:00:00
Creation Date	2015-11-18 09:41:47
Producing Software	Adobe PDF library 9.90
Document Lastmod	2015-11-18 09:41:52
Document Title	ECS SI mPC 2
Document Creator	Adobe Illustrator CS5.1

Chapter
Using BIOS
4.1 About the Setup Utility
The computer uses the latest “American Megatrends Inc.” BIOS with support for Windows Plug and
Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the
motherboard BIOS.
The BIOS (Basic Input and Output System) Setup Utility displays the system’s configuration status and
provides you with options to set system parameters. The parameters are stored in battery-backed-up
CMOS RAM that saves this information when the power is turned off. When the system is turned back
on, the system is configured with the values you stored in CMOS.
The BIOS Setup Utility enables you to configure:
•
Hard drives, diskette drives and peripherals
•
Video display type and display options
•
Password protection from unauthorized use
•
Power Management features
The settings made in the Setup Utility affect how the computer performs. Before using the Setup Utility,
ensure that you understand the Setup Utility options.
This chapter provides explanations for Setup Utility options.
1. The Standard Configuration
A standard configuration has already been set in the Setup Utility. However, we recommend that you
read this chapter in case you need to make any changes in the future.
This Setup Utility should be used:
•
when changing the system configuration
•
when a configuration error is detected and you are prompted to make changes to the Setup
Utility
•
when trying to resolve IRQ conflicts
•
when making changes to the Power Management configuration
•
when changing the password or making other changes to the Security Setup
2. Entering the Setup Utility
When you power on the system, BIOS enters the Power-On Self Test (POST) routines. POST is a
series of built-in diagnostics performed by the BIOS. After the POST routines are completed, the
following message appears:
21
ECS SI mPC
Press DEL to enter SETUP
Press the delete key to access BIOS Setup Utility.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main
BIOS Information
System Date
System Time
[Tue 07/28/2015]
[10:20:36]
Set the Date. Use Tab to
switch between Date
elements.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
4.2 Using BIOS
When you start the Setup Utility, the main menu appears. The main menu of the Setup Utility displays
a list of the options that are available. A highlight indicates which option is currently selected. Use the
cursor arrow keys to move the highlight to other options. When an option is highlighted, execute the
option by pressing .
Some options lead to pop-up dialog boxes that prompt you to verify that you wish to execute that option.
Other options lead to dialog boxes that prompt you for information.
Some options (marked with a triangle )lead to submenus that enable you to change the values for the
option. Use the cursor arrow keys to scroll through the items in the submenu.
In this manual, default values are enclosed in parenthesis. Submenu items are denoted by a triangle .
The default BIOS setting for this motherboard apply for most conditions with optimum performance.
We do not suggest users change the default values in the BIOS setup and take no responsibility to
any damage caused by changing the BIOS settings.
ECS SI mPC
22
1. BIOS Navigation Keys
The BIOS navigation keys are listed below:
KEY
ESC
FUNCTION
Exit the current menu
Scrolls through the items on a menu
+/-
Change Opt.
Enter
Select
F1
General Help
F2
Previous Value
F3
Optimized Defaults
F4
Save & Exit
For the purpose of better product maintenance, the manufacture reserves the right to change
the BIOS items presented in this manual. The BIOS setup screens shown in this chapter are for
reference only and may differ from the actual BIOS. Please visit the manufacture’s website
for updated manual.
2. Main Menu
When you enter the BIOS Setup program, the main menu appears, giving you an overview of
the basic system information. Select an item and press  to display the submenu.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main
BIOS Information
System Date
System Time
[Tue 07/28/2015]
[10:20:36]
Set the Date. Use Tab to
switch between Date
elements.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
System Date & Time
The Date and Time items show the current date and time on the computer. If you are running a
Windows OS, these items are automatically updated whenever you make changes to the Windows
Date and Time Properties utility.
23
ECS SI mPC
3. Advanced Menu
This page sets up more advanced information about your system. Handle this page with caution.
Any changes can affect the operation of your computer.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
LAN Configuration
Parameters
LAN Configuration
Power Management Setup
PC Health Status
ACPI Settings
CPU Configuration
SATA Configuration
USB Configuration
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
LAN Configuration
The item in the menu shows the LAN-related information that the BIOS automatically detects.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
LAN Configuration
Onboard LAN Controller
[Enabled]
Enabled/Disabled
Onboard LAN 1
Controller
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Onboard LAN Controller (Enabled)
Use this item to enable or disable the Onboard LAN.
Press  to return to the Advanced Menu page.
ECS SI mPC
24
Power Management Setup
This page sets up some parameters for system power management operation.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Resume from LAN1 Help
Power Management Setup
Resume from LAN
Resume By PME
Resume By USB
Resume By RTC Alarm
EUP Function
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Resume from LAN (Enabled)
Use this item to enable or disable resume from LAN.
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the system can
automatically resume if there is an incoming call on the PCI/PCI-E Modem or PCI/PCI-E LAN card.
You must use an ATX power supply in order to use this feature. Use this item to do wake-up action
if inserting the PCI/PCI-E card.
Resume By USB (Enabled)
This item allows you to enable or disable the USB device wakeup function from S3 mode.
Resume By RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the system can
automatically resume at a fixed time based on the system’s RTC (realtime clock). Use the item below
this one to set the date and time of the wake-up alarm. You must use an ATX power supply in order
to use this feature.
EUP Function (Enabled)
This item allows you to enable or disable EUP function.
Press  to return to the Advanced Menu page.
25
ECS SI mPC
PC Health Status
This motherboard supports hardware monitoring, this item lets you monitor the parameters for
critical voltages, temperatures and fan speeds.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
PC Health Status
Smart Fan Function
System Temperature
CPU Temperature
CPU Fan Speed
VCore
DIMM Voltage
+12V
VCC
VCC3
30℃
34℃
920 RPM
0.996V
1.380V
12.240V
5.040V
3.336V
Select the highest ACPI
sleep state the system
will enter when the
SUSPEND button is
pressed.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events, sucha as CPU &
DIMM voltage, CPU & System fan speed...etc.
•
•
•
•
•
•
•
•
System Temperature
CPU Temperature
CPU Fan Speed
VCore
DIMM Voltage
+12V
VCC
VCC3
Press  to return to the Advanced Menu page.
ECS SI mPC
26
ACPI Settings
This item in the menu shows the highest ACPI sleep state when the system enters suspend.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
ACPI Settings
ACPI Sleep State
[S3 (Suspend to RAM)]
Select the highest ACPI
sleep state the system
will enter when the
SUSPEND button is
pressed.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
ACPI Sleep State (S3 (Suspend to RAM))
This item allows you to enter the APCI S3 (Suspend to RAM) Sleep State (default).
Press  to return to the Advanced Menu page.
CPU Configuration
The item in this menu shows the CPU configuration.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Socket specific CPU
Information
CPU Configuration
Socket 0 CPU Information
CPU Speed
64-bit
2.16 GHz
Supported
Limit CPUID Maximum
Execute Disable Bit
Intel Virtualization Technology
Power Technology
[Disabled]
[Enabled]
[Enabled]
[Energy Efficient]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
27
ECS SI mPC
Socket 0 CPU Information
Scroll to this item and press  to view the following screen:
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Socket 0 CPU Information
Intel(R) Celeron(R) CPU N2830 @ 2.16GHz
CPU Signature
30678
Microcode Patch
815
Max CPU Speed
2168 MHz
Min CPU Speed
500 MHz
Processor Cores
Intel HT Technology
Not Supported
Intel VT-x Technology
Supported
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
24 KB x 2
32 KB x 2
1024 KB x 1
Not Present
Select the highest ACPI
sleep state the system
will enter when the
SUSPEND button is
pressed.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Intel(R) Celeron(R) CPU N2830 @ 2.16GHz
This is display-only field and displays the information of the CPU installed in your computer.
CPU Signature (30678)
This item shows the information of the CPU signature.
Microcode Patch (815)
This item shows the version of microcode patch.
Max CPU Speed (2168 MHz)
This item shows the max speed of the CPU.
Min CPU Speed (500 MHz)
This item shows the min speed of the CPU.
Processor Cores (2)
This item shows the number of cores of the processor.
Intel HT Technology (Not Supported)
This item shows the computer supports Intel HT technology or not.
Intel VT-x Technology (Supported)
This item shows the computer supports Intel VT-x technology or not.
LI Data Cache (24 KB x 2)
This item shows the size of CPU L1 Data Cache memory.
LI Code Cache (32 KB x 2)
This item shows the size of CPU L1 Code Cache memory.
L2/L3 Cache (1024KB x 1/Not Present)
These items show the size of CPU L2/L3 Cache memory.
Press  to return to the CPU Configuration page.
ECS SI mPC
28
CPU Speed (2.16 GHz)
This item shows the processor speed.
64-bit (Supported)
This item shows the computer supports 64-bit.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enable this item to
prevent the system from “rebooting ” when trying to install Windows NT 4.0.
Execute Disable Bit (Enabled)
This item allows the processor to classify ares in memory by where application code can execute
and where it cannot. When a malicious worm attempts to insert code in the buffer, the processor
disables code execution, preventing damage or worm propagation. Replacing older computers with
Execute Disable Bit enabled systems can halt worm attacks, reducing the need for virus related
repair.
Intel Virtualization Technology (Enabled)
When disabled, a VMM cannot utilize the additional hardware capabilities provided by Vandor Pool
Technology.
Power Technology (Energy Efficient)
Use this item to control the Energy mode of the processor.
Press  to return to the Advanced Menu page.
SATA Configuration
Use this item to show the mode of Serial ATA configuration options.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Select IDE / AHCI
SATA Configuration
SATA Mode
[AHCI Mode]
mSATA Port
SATA Port
Not Present
Not Present
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
SATA Mode (AHCI Mode)
Use this item to select SATA mode.
mSATA/SATA Port (Not Present)
This motherboard supports one mSATA and one SATA channel, and each channel allows one mSATA
/SATA device to be installed. Use these items to configure each device on the mSATA/SATA channel.
Press  to return to the Advanced Menu page.
29
ECS SI mPC
USB Configuration
Use this item to show the information of USB configuration.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
USB Support Parameters
USB Configuration
All USB Devices
[Enabled]
Legacy USB Support
XHCI Mode
External USB3.0 Device
[Enabled]
[Auto]
[Enabled]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
All USB Devices (Enabled)
Use this item to enable or disable all USB devices.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices.
XHCI Mode (Auto)
Use this item to enable or disable all USB XHCI mode.
External USB3.0 Device (Enabled)
Use this item to enable or disable external USB 3.0 device.
ECS SI mPC
30
4. Chipset Menu
The chipset menu items allow you to change the settings for the SoC chip and other system.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Chipset
SoC Configuration
TXE Information
CPU Shutdown Temperature
LOGO LED
SoC Parameters
[Disabled]
[Enabled]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
SoC Configuration
Scroll to this item and press  to view the following screen:
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Chipset
SoC Configuration
DVMT Pre-Allocated
DVMT Total Gfx Mem
[64M]
[256MB]
Restore AC Power Loss
[Power Off]
Audio Configuration
Azalia HD Audio
Azalia Internal HDMI Codec
[Enabled]
[Enabled]
Select DVMT 5.0
Pre-Allocated (Fixed)
Graphics Memory size
used by the Internal
Graphics Device.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
DVMT Pre-Allocated (64M)
This item is used to select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal
Graphics Device.
DVMT Total Gfx Mem (256MB)
This item is used to select DVMT 5.0 and Graphics Memory size used by the Internal Graphics Device.
31
ECS SI mPC
Restore AC Power Loss (Power Off)
This item enables your computer to automatically restart or return to its operating status.
Azalia HD Audio (Enabled)
This item enables or disables Azalia HD Audio.
Azalia Internal HDMI Codec (Enabled)
This item enables or disables Azalia Internal HDMI Codec.
Press  to return to the Chipset Menu page.
ECS SI mPC
32
TXE Information
Scroll to this item and press  to view the following screen:
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Chipset
Enable/Disable TXE
Firmware
TXE Information
Sec RC Version
TXE FW Version
00.05.00.00
01.01.00.1089
TXE Mode
[Enabled]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Sec RC Version (00.05.00.00)
This item shows the Sec Reference Code version.
TXE FW Version (01.01.00.1089)
This item shows the TXE Firmware version.
TXE Mode (Enabled)
This is TXE mode control item, it is used to enable or disable the TXE firmware.
Press  to return to the Chipset Menu page.
CPU Shutdown Temperature (Disabled)
This item enables or disables CPU shutdown temperature.
LOGO LED (Enabled)
This item enables or disables LOGO LED.
33
ECS SI mPC
5. Boot Menu
This page enables you to set the keyboard NumLock state and devices boot sequence.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Boot
Windows 7 or other OS:
Boot policy for Legacy OS
Boot Configuration
Operation System Select
Launch Network OpROM
Launch Storage OpROM
[Windows 7 or othe...]
[Disabled]
[Disabled]
Fast Boot
[Disabled]
Bootup NumLock State
Quiet Boot
Boot Mode Select
[On]
[Disabled]
[LEGACY]
Windows 8.x with CSM:
Boot policy for Windows
8.x with Compatibility
Support Module (CSM)
Set Boot Priority
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
[Hard Disk]
[CD/DVD]
[USB/Floppy]
[USB CD/DVD]
[USB Hard Disk]
[USB Flash]
[Network]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Windows 8.x: Boot policy
for UEFI OS without
Compatibility Support
Module (CSM)
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Operation System Select (Windows 7 or othe...)
This item is used to select the operation system.
Launch Network OpROM (Disabled)
This item enables or disables launch network option ROM.
Launch Storage OpROM (Disabled)
This item enables or disables launch storage option ROM.
Fast Boot (Disabled)
This item enables or disables boot with initialization of a minimal set of device required to launch active
boot option. Has no effect for BBS boot options.
Bootup Numlock State (On)
This item enables you to select Numlock state.
Quiet Boot (Disabled)
This item enables or disables quiet boot.
Boot Mode Select (LEGACY)
Use this item to select boot mode.
Boot Option #1 /2 /3 /4 /5 /6 /7
These items show the boot priorities.
ECS SI mPC
34
6. Security Menu
This page enables you to set setup administrator and password.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Security
Administrator Password Status
User Password Status
Not Installed
Not Installed
Set Administrator
Password
Administrator Password
Secure Boot menu
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Administrator Password Status (Not Installed)
This item shows administrator password installed or not.
User Password Status (Not Installed)
This item shows user password installed or not.
35
ECS SI mPC
Secure Boot menu
Scroll to this item and press  to view the following screen:
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Security
System Mode
Secure Boot
Setup
Not Active
Secure Boot
[Disabled]
Secure Boot can be
enabled if
1. System running in
User mode with enrolled
Platform Key(PK)
2. CSM function is
disabled
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
System Mode (Setup)
This item shows system of secure boot (can be setup or user).
Secure Boot (Not Active/Disabled)
This item shows the active state of secure boot.
ECS SI mPC
36
7. Exit Menu
This page enables you to exit system setup after saving or without saving the changes.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Exit
Exit system setup after
saving the changes.
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Save Changes and Exit
This item enables you to save the changes that you have made and exit.
Discard Changes and Exit
This item enables you to discard any changes that you have made and exit.
Save Changes and Reset
This item enables you to save the changes that you have made and reset.
Discard Changes and Reset
This item enables you to discard any changes that you have made and reset.
Save Options
This item enables you to save the options that you have made.
Save Changes
This item enables you to save the changes that you have made.
Discard Changes
This item enables you to discard any changes that you have made.
Restore Defaults
This item enables you to restore the system defaults.
Save as User Defaults
This item enables you to save the changes that you have made as user defaults.
Restore User Defaults
This item enables you to restore user defaults.
Boot Override
Use this item to select the boot device.
37
ECS SI mPC
8. Updating the BIOS
You can download and install updated BIOS for this motherboard from the manufacturer’s Website.
New BIOS provides support for new peripherals, improvements in performance, or fixes for known
bugs. Install new BIOS as follows
If your motherboard has a BIOS protection jumper, change the setting to allow BIOS
flashing.
If your motherboard has an item called Firmware Write Protect in Advanced BIOS
features, disable it. (Firmware Write Protect prevents BIOS from being overwritten.)
Prepare a bootable device or create a bootable system disk. (Refer to Windows online
help for information on creating a bootable system disk.)
Download the Flash Utility and new BIOS file from the manufacturer’s Web site. Copy
these files to the bootable device.
Turn off your computer and insert the bootable device in your computer. (You might
need to run the Setup Utility and change the boot priority items on the Advanced
BIOS Features Setup page, to force your computer to boot from the bootable device
first.)
At the C:\ or A:\ prompt, type the Flash Utility program name and the file name of the
new BIOS and then press . Example: AFUDOS.EXE 040706.ROM
When the installation is complete, remove the bootable device from the computer and
restart your computer. If your motherboard has a Flash BIOS jumper, reset the jumper
to protect the newly installed BIOS from being overwritten. The computer will restart
automatically.
ECS SI mPC
38
Chapter
Feature Information
5.1 Introduction
The NFC and wireless charger is optional feature on this computer. Please refer to following
instructions.
1. Wireless charger (Not Support)
The Wireless charger specification that the computer support is compatible with Qi. Put the Rx
device on charger area for power transfer.
2. NFC
The NFC module that compatible with (1) ISO 15693 (2) ISO 14443A (3) ISO 14443B. Put the
device on the center of computer for read/write.
Wireless charger/NFC (Optional)
ECS SI mPC
Wireless charger/NFC (Optional)
40

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2015:11:18 09:41:52+08:00
Create Date                     : 2015:11:18 09:41:47+08:00
Metadata Date                   : 2015:11:18 09:41:52+08:00
Creator Tool                    : Adobe Illustrator CS5.1
Format                          : application/pdf
Title                           : ECS SI mPC 2
Document ID                     : uuid:f662ac82-d632-4db1-928a-e3f07f605a37
Instance ID                     : uuid:114b36f5-7356-4cd5-89b8-e889109bbac6
Producer                        : Adobe PDF library 9.90
Page Count                      : 21
Creator                         : Adobe Illustrator CS5.1

EXIF Metadata provided by EXIF.tools