ELITEGROUP COMPUTER SYSTEMS TB71A-W 7 Inch Pocketable Pad User Manual

ELITEGROUP COMPUTER SYSTEMS CO., LTD 7 Inch Pocketable Pad

Contents

User Manual

User Manual
TB71A-W
7" Intel Atom based Pocketable
pads
Copyright
The documentation and the software included with this product are copyrighted 2009 by
ECS(ELITEGROUP COMPUTER SYSTEM) Co., Ltd. All rights are reserved. ECS Co.,
Ltd. reserves the right to make improvements in the products described in this manual at
any time without notice. No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written permission of ECS Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However,
ECS Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights
of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Declaration of Conformity
FCC Class B
Part No. 2014050100 Edition 1
Printed in China May 2014
TB71A-W Tablet PC User Manual ii
Caution! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
Dispose of used batteries according to the manufacturer's
instructions
Warning! Any changes or modifications made to the equipment which are not
expressly approved by the relevant standards authority could void your
authority to operate the equipment.
Attention! Toute modification apportée à l'équipement qui n'est pas expressément
approuvé par l'autorité des normes pertinentes peuvent annuler votre
droit à faire fonctionner l'équipement.
Attention!
Danger d'explosion si la pile est remplacée de façon incorrecte.
Remplacez-la uniquement avec le même type ou équivalent recommandé
par le fabricant. Jetez les piles usagées selon les instructions du fabricant
Packing List
Before setting up the system, check that the items listed below are included and in good
condition. If any items are missing, please contact your dealer immediately.
 TB71A-W x1
 Strap x1
 Stylus pen x1
 USB Charger
 USB Charge Docking Cable x1
 HDMI Docking cable x1
 USB3.0 Docking cable x1
 Docking Holder x1
 Docking Power adapter x1
 Software CD (Drivers and Utility, Manual)
Warning!
To prevent electric shock, Do not remove cover.
No user serviceable parts inside, refer servicing to qualified personnel.
Additional Information and Assistance
1. Visit the ECS websites at www.ecs.com.tw where you can find the latest information
about the product.
2. Contact your distributor, sales representative, or ECS's customer service center for
technical support if you need additional assistance. Please have the following
information ready before you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, application software, etc.)
- A complete description of the problem
- The exact wording of any error messages
- This equipment is a source of electromagnetic waves. Before use, please make
sure that there are not EMI sensitive devices in its surrounding which may
malfunction therefore
Warning! 1. Input voltage rated 100-240 VAC, 50-60 Hz, 1.5 A, Output
Voltage rated 5 VDC, 2 A
2. Use a 3.7 V @ 4100 mA Lithium-ion battery (Model No. LWN436789)
3. Maintenance: to properly maintain and clean the surfaces, use only
approved products or clean with a dry applicator
iii TB71A-W Tablet PC User
Manual
Attention! Pour éviter un choc électrique, ne pas retirer le couvercle.
Aucune pièce réparable par l'utilisateur, voir l'entretien à du personnel
qualifié.
Attention! 1. Tension de sortie Tension d'entrée nominale 100-240 VAC, 50-
60 Hz, 1,5 A, la note de 5 VDC, 2 A
2. Utiliser un V @ 4100 mA Batterie Lithium-ion (modèle n ° LWN436789) 3.7
3. Entretien: bien entretenir et nettoyer les surfaces, utiliser uniquement des
produits approuvés ou nettoyer avec un applicateur sec
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.
Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment
and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according to the
user's manual.
e. The equipment has been dropped and damaged. f.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE
TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60°C (140° F). THIS
COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A
CONTROLLED ENVIRONMENT.
16. If your computer is losing time significantly or the BIOS configuration resets itself
to the default, the battery may have no power.
Caution! 1. Do not replace battery yourself. Please contact a qualified technician or
your retail provider.
2. The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
TB71A-W Tablet PC User Manual iv
Attention! 1. Ne pas remplacer la batterie vous-même. S'il vous plaît contacter un
technicien qualifié ou votre fournisseur de détail.
2. L'ordinateur est muni d'un circuit en temps réel de l'horloge alimentée par
batterie. Il ya un danger d'explosion si la pile est remplacée de façon
incorrecte. Remplacez uniquement par un type identique ou équivalent
recommandé par le fabricant. Jetez les piles usagées selon les instructions
du fabricant.
17. IMPROPER INSTALLATION OF VESA MOUNTING CAN RESULT IN SERIOUS
PERSONAL INJURY! VESA mount installation should be performed by a professional
technician; please contact the service technician or your retailer if you need this
service.
18. CLASSIFICATION:
Supply Class I adapter
No applied part
IP54
Continuous Operation
Not AP or APG category
19. Disconnect device: Appliance inlet.
20. Follow national, state or local requirements to dispose of unit.
21. Maintenance: to properly maintain and clean the surfaces, use only the
approved products or clean with a dry applicator.
22. Contact information:
No.239, Sec. 2, Ti Ding Blvd., Taipei City 11493, Taiwan (R.O.C.)
TEL: +886-2-2162-1177
23. This equipment shall not be used as a life support system.
24. Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore all configurations shall comply with the system standard IEC
60601-1-1. Anyone who connects additional equipment to the signal input part or signal
output part is configuring a medical system, and is therefore, responsible that the
system complies with the requirements of the system standard IEC
60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certified
equipment in the patient environment and IEC 60XXX certified equipment out- side of
the patient environment. If in doubt, consult the technical services department or your
local representative.
25. Users must not allow SIP/SOPs to come into contact with the patient at the same
time.
26. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. ECS disclaims all
responsibility for the accuracy of any statements contained herein.
v TB71A-W Tablet PC User
Manual
TB71A-W Tablet PC User Manual vi
Contents
Chapter 1 General Information ............................1
1.1 Introduction .............................................................................................. 2
1.2 Specifications .......................................................................................... 2
Table 1.1: MICA Specification ................................................. 2
1.3 Cleaning/Disinfecting ............................................................................... 4
1.4 Dimensions .............................................................................................. 5
Figure 1.1 MICA Dimensions ....................................................... 5
Chapter 2 Getting Started.....................................7
2.1 A Quick Tour of MICA .............................................................................. 8
Figure 2.1 Front View ............................................................... 8
Figure 2.2 Left Side View........................................................... 8
Figure 2.3 Right Side View ....................................................... 9
Figure 2.4 Rear View ................................................................... 9
Figure 2.5 Top View ……........................................................... 10
2.2 A Quick Tour of MICA Docking Station (Optional) ................................. 10
Figure 2.6 Front View ............................................................. 10
Figure 2.7 Rear View of Docking Station ...................................10
Figure 2.8 Strap ........................................................................ 11
2.3 Installation Procedures........................................................................... 11
2.3.1 Install the Strap (Optional).......................................................... 11
Figure 2.9 Install the Strap......................................................... 11
2.3.2 Insert / Hang the Stylus (Optional)............................................. 11
Figure 2.10 Stylus...................................................................... 11
Figure 2.11 Secure the stylus.................................................... 12
2.3.3 Insert the MICA into the Docking Station (Optional)................... 12
Figure 2.12 Open and secure the protective cover.................... 12
Figure 2.13 TB71A-W in Docking Station.................................. 12
2.3.4 Connecting the Power Cord for the Docking Station.................. 13
Figure 2.14 Connecting the AC Adapter Power Supplier to the
Docking Station………………………………………………....... 13
2.3.5 Connecting the USB Charger to MICA...................................... 14
Figure 2.15 Connecting the AC Adapter Power Supplier to the
Docking Station……………………………………………............ 14
vii TB71A-W Tablet PC User
Manual
TB71A-W Tablet PC User Manual
viii
Chapter 1
1 General Information
Display 7" TFT LCD Panel
Touch Panel 5-point P-cap touch panel
Max. Resolution 800 x 1280
Stylus Pen Capacitive stylus pen
Storage EMMC 32G
WiFi- 802.11 a/b/g/n WLAN (5 G/2.4 G)
Barcode Scanner 1D/2D Barcode scanner
1.1 Introduction
MICA is a multimedia Atom Mobile processor-based computer that is designed to serve as a
Mobile Clinical Assistant (MCA). It is a PC-based system with 7" TFT LCD display and a
stereo audio controller. MICA is a simple, complete and highly integrated mobile multimedia
system which allows system integrators to easily build a Mobile Clinical Assistant Terminal
into their applications.
Common industrial applications include factory automation systems, precision machinery,
and production process control. It is also suitable for many non-industrial applications,
including interactive kiosk systems, entertainment management, and car park automation.
MICA is a reliable, cost-effective solution to meet an applications processing requirements.
1.2 Specifications
Table 1.1: TB71A-W Specification
Item Description
Dimensions (WþH) 121 mm x 200 mm x 14.5 / 24 mm (bottom / top)
Weight 400g
Intel® Atom Processor Bay Trail - T Z3770
CPU and Chipset
- 22 nm system-on-a-chip (SoC)
- 2M Cache, up to 2.39 GHz
Memory LPDDR3 4G
Graphics Intel® Integrated HD Graphics
Audio Realtek ALC5642
Internal Speaker x1, Internal microphone x 2, Receiver x1
Docking port x 1
I/O Ports
SD card slot x 1
SIM card slot (Optional) x 1
Line out x 1
Communication
Bluetooth V2.0+EDR / Bluetooth 4.0 LE
3G 850/900/1900/2100 Support HSPA+ (Optional)
GPS 850/900/1900/2100 Support HSPA+ (Optional)
NFC Support ISO14443, 1.0inch
Ingress Protection IP54-rated, Alcohol resistant for cleaning purposes
Thermal Solution Fanless Design
Operating System
Windows 8.1 Industry Pro 64Bits
Camera 8.0 Mega pixel camera with LED light
Auto-focus supported
MICA Tablet PC User Manual 2
Web Camera 2.0 Mega pixel VGA camera
Power button: On the top side of MICA
Barcode scanner buttons: Two orange buttons
Volume control button
Home Key button
Programmable button
¢ Camera snapshot button
Control Button
Indicated LED
Power Adapter
USB Charger
Battery
Programmable button (Default setting):
- P1 for S3 mode
- P2 for WiFi on/off
Power LED & Battery status LED
Full → Blue
Charging → Orange
APD WA-20A05FU
INPUT: 100 ~ 240 V, 0.6 A Max., 50/60 Hz
OUTPUT: 5 V, 4 A
Chicony W12-010N3A
INPUT: 100 ~ 240 V, 0.5 A Max., 50/60 Hz
OUTPUT: 5 V, 2 A Max.
Model: MICA-071
Lithium-ion battery (3.7 V @ 4100 mAh)
4 Hr charging time
3 TB71A-W Tablet PC User
Manual
Operating Temperature C ~ 40° C
Operating Humidity 10% ~ 90% @ 40° C, non-condensing
Storage Temperature -20° C ~ 60° C
Storage Humidity 10% ~ 95%, non-condensing
Transportation Temperature -20° C ~ 60° C Transportation
Humidity 10% ~ 95%, non-condensing
Certifications
Safety FCC Part 15 Class B, UL, CE, CB60950, RoHS
1.3 Cleaning/Disinfecting
During normal use TB71A-W may become soiled and should, therefore, be cleaned
regularly.
Steps:
1. Wipe TB71A-W with a clean cloth that has been moistened in the cleaning solution.
2. Prepare agent per manufacturers instructions or hospital protocol.
3. Wipe thoroughly with a clean cloth.
Caution! Do not immerse or rinse TB71A-W or its peripherals. If you accidentally spill
liquid on the device, disconnect the unit from the power source. Contact your
Biomed personnel regarding the continued safety of the unit before placing it
back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean TB71A-W or its peripherals with strong aromatic,
chlorinated, ketone, ether, or other solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
TB71A-W Tablet PC User Manual 4
Attention! Ne pas immerger ou rincer TB71A-W ou ses périphériques. Si vous
renversez par accident un liquide sur l'appareil, débranchez l'appareil de la
source d'alimentation. Contactez votre Biomed concernant la sécurité
continue de l'unité avant de la remettre en service.
Ne pas pulvériser l'agent de nettoyage sur le châssis.
Ne pas utiliser de désinfectants contenant du phénol.
Ne pas passer à l'autoclave ou MICA propre ou ses périphériques avec
fortes, cétone, éther, ou d'autres solvants, des outils tranchants ou abrasifs
aromatiques chlorés. Ne jamais plonger connecteurs électriques dans l'eau
ou d'autres liquids.
1.4 Dimensions
Figure 1.1 TB71A-W Dimensions
5 TB71A-W Tablet PC User
Manual
121mm
200mm
TB71A-W Tablet PC User Manual 6
Chapter 2
2 Getting Started
2.1 A Quick Tour of MICA
Before you start to set up TB71A-W, take a moment to become familiar with the locations
and purposes of the controls, drives, connections and ports, which are illustrated in the
figures below.
When placed upright on the desktop, the TB71A-W front panel appears as shown in Figure
2.1.
LED indicator
Ambient sensor
Camera
Figure 2.1 Front View
The volume control button, barcode scanner button and docking connector are on the left side
of the tablet PC.
Figure 2.2 Left Side View
TB71A-W Tablet PC User Manual 8
Receiver
Home Key
Barcode scanner button
Volume control button
Docking connector
Hang hole
The card slots, barcode scanner button and programmable buttons are on the right side of
the tablet PC.
Barcode scanner button
Figure 2.3 Right Side View
The rear view of the tablet PC is depicted in Figure 2.4.
Camera
Camera flash
Speaker
Figure 2.4 Rear View
9 TB71A-W Tablet PC User
Manual
Card Slots(Micro SD & SIM card)
Programmable key
Hang hole
LAN
port
HDMI
port
DC in jack
USB 3.0
port
USB 2.0
ports
The top side of the tablet PC contains power button, barcode scanner and headphone jack.
Figure 2.5 Top View
2.2 A Quick Tour of TB71A-W Docking Holder
(Optional)
When you place the docking station on the desktop, its front panel appears as shown in Figure
2.6.
Figure 2.6 Front View
TB71A-W Tablet PC User Manual 10
Figure 2.7 Rear View of Docking Station
Power button
Headphone jack
Barcode scanner
Docking connector
2.3 Installation Procedures
2.3.1 Install the Strap (Optional)
This strap is designed for the TB71A-W, which make the tablet convenient to hold.
11 TB71A-W Tablet PC User
Manual
Figure 2.8 Strap
a. Aim the triangle mark on the strap to the home key to slightly insert the bottom side of the
tablet into the strap.
b. Press to insert the top side of tablet into the strap.
2.3.2 Insert / Hang the Stylus (Optional)
Figure 2.9 Install the Strap
Figure 2.10 Stylus
TB71A-W Tablet PC User Manual 12
Figure 2.13 TB71A-W in Docking Station
2. Align the docking port to the docking connector to insert the tablet into the docking station
and press it right into position.
Note! Before placing the tablet into the docking station, please make sure that the
protective cover of docking port is placed right into its reserved slot.
Figure 2.12 Open and secure the protective cover
2.3.3 Insert the MICA into the Docking Station (Optional)
1. Open and turn the protective cover of the docking port to the opposite side and press to
lock it into its reserved slot.
Figure 2.11 Secure the stylus
a. Hang and secure the stylus through the hang hole of the TB71A-W.
b. Insert and secure the stylus onto the strap.
13 TB71A-W Tablet PC User Manual
2.3.4 Connecting the Power Cord for the Docking Station
Be sure to always handle the power cords by holding the plug ends only. Follow
these procedures in order:
1. Insert the TB71A-W into the docking station as previous section 2.3.3.(See Figure
2.13).
2. Connect the female end of the power cord to the DC-in jack of the docking station.
3. Connect the 2-pin male plug of the power cord to an electrical outlet.
Figure 2.14 Connecting the AC Adapter Power Supplier to the Docking Station
Step 3
Step 2
2.3.5 Connecting the USB Charger to MICA
Please follow these procedures in order:
1. Open and turn the protective cover of the docking port to the opposite side and
press to lock it into its reserved slot. (See Figure 2.12)
2. Connect the docking end of the USB charge cable to the docking port of MICA (See
Figure 2.14).
3. Connect the USB end of the USB charge cable to the USB charger.
4. Insert the 2-pin plug into an electrical outlet.
TB71A-W Tablet PC User Manual 14
Figure 2.15 Connecting the AC Adapter Power Supplier to the Docking Station
Step 3
Step 2
Step 4
www.ecs.com.tw
This guide is intended for reference purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permis-
sion of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.
© ELITEGROUP COMPUTER SYSTEM Co., Ltd. 2009

Navigation menu