ELITEGROUP COMPUTER SYSTEMS TB71A-W 7 Inch Pocketable Pad User Manual

ELITEGROUP COMPUTER SYSTEMS CO., LTD 7 Inch Pocketable Pad

Contents

User Manual

Download: ELITEGROUP COMPUTER SYSTEMS TB71A-W 7 Inch Pocketable Pad User Manual
Mirror Download [FCC.gov]ELITEGROUP COMPUTER SYSTEMS TB71A-W 7 Inch Pocketable Pad User Manual
Document ID2309108
Application IDPF43HyhBaAW0gxN30kHPxw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize63kB (787444 bits)
Date Submitted2014-06-27 00:00:00
Date Available2014-06-29 00:00:00
Creation Date2014-06-26 11:20:39
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2014-06-26 16:26:51
Document TitleUser Manual
Document CreatorMicrosoft® Word 2013
Document Author: Cathy Mo

User Manual
TB71A-W
7" Intel Atom based Pocketable
pads
Copyright
The documentation and the software included with this product are copyrighted 2009 by
ECS(ELITEGROUP COMPUTER SYSTEM) Co., Ltd. All rights are reserved. ECS Co.,
Ltd. reserves the right to make improvements in the products described in this manual at
any time without notice. No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written permission of ECS Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However,
ECS Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights
of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Declaration of Conformity
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.


Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
FCC Label Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Part No. 2014050100
Edition 1
Printed in China
May 2014
TB71A-W Tablet PC User Manual
ii
Warning!
Any changes or modifications made to the equipment which are not
expressly approved by the relevant standards authority could void your
authority to operate the equipment.
Attention!
Toute modification apportée à l'équipement qui n'est pas expressément
approuvé par l'autorité des normes pertinentes peuvent annuler votre
droit à faire fonctionner l'équipement.
Caution!
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions
Attention!
Danger d'explosion si la pile est remplacée de façon incorrecte.
Remplacez-la uniquement avec le même type ou équivalent recommandé
par le fabricant. Jetez les piles usagées selon les instructions du fabricant
Packing List
Before setting up the system, check that the items listed below are included and in good
condition. If any items are missing, please contact your dealer immediately.
 TB71A-W x1
 Strap x1
 Stylus pen x1
 USB Charger
 USB Charge Docking Cable x1
 HDMI Docking cable x1
 USB3.0 Docking cable x1
 Docking Holder x1
 Docking Power adapter x1
 Software CD (Drivers and Utility, Manual)
Warning!
To prevent electric shock, Do not remove cover.
No user serviceable parts inside, refer servicing to qualified personnel.
Attention!
Pour éviter un choc électrique, ne pas retirer le couvercle.
Aucune pièce réparable par l'utilisateur, voir l'entretien à du personnel
qualifié.
Additional Information and Assistance
1.
Visit the ECS websites at www.ecs.com.tw where you can find the latest information
about the product.
2.
Contact your distributor, sales representative, or ECS's customer service center for
technical support if you need additional assistance. Please have the following
information ready before you call:
Product name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
- The exact wording of any error messages
- This equipment is a source of electromagnetic waves. Before use, please make
sure that there are not EMI sensitive devices in its surrounding which may
malfunction therefore
Warning!
1. Input voltage rated 100-240 VAC, 50-60 Hz, 1.5 A, Output
Voltage rated 5 VDC, 2 A
2. Use a 3.7 V @ 4100 mA Lithium-ion battery (Model No. LWN436789)
3. Maintenance: to properly maintain and clean the surfaces, use only
approved products or clean with a dry applicator
Attention!
1. Tension de sortie Tension d'entrée nominale 100-240 VAC, 5060 Hz, 1,5 A, la note de 5 VDC, 2 A
2. Utiliser un V @ 4100 mA Batterie Lithium-ion (modèle n ° LWN436789) 3.7
3. Entretien: bien entretenir et nettoyer les surfaces, utiliser uniquement des
produits approuvés ou nettoyer avec un applicateur sec
iii
Manual
TB71A-W Tablet PC User
Safety Instructions
1.
Read these safety instructions carefully.
2.
3.
Keep this User Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.
Do not use liquid or spray detergents for cleaning.
4.
For plug-in equipment, the power outlet socket must be located near the equipment
and must be easily accessible.
5.
6.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
7.
The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
8.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9.
Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
10.
11.
All cautions and warnings on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient overvoltage.
12.
13.
Never pour any liquid into an opening. This may cause fire or electrical shock.
Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14.
If one of the following situations arises, get the equipment checked by service
personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according to the
user's manual.
e. The equipment has been dropped and damaged. f.
The equipment has obvious signs of breakage.
15.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE
TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60°C (140° F). THIS
COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A
CONTROLLED ENVIRONMENT.
16.
If your computer is losing time significantly or the BIOS configuration resets itself
to the default, the battery may have no power.
Caution!
1. Do not replace battery yourself. Please contact a qualified technician or
your retail provider.
2. The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
Attention!
1. Ne pas remplacer la batterie vous-même. S'il vous plaît contacter un
technicien qualifié ou votre fournisseur de détail.
2. L'ordinateur est muni d'un circuit en temps réel de l'horloge alimentée par
batterie. Il ya un danger d'explosion si la pile est remplacée de façon
incorrecte. Remplacez uniquement par un type identique ou équivalent
recommandé par le fabricant. Jetez les piles usagées selon les instructions
du fabricant.
TB71A-W Tablet PC User Manual
iv
17.
IMPROPER INSTALLATION OF VESA MOUNTING CAN RESULT IN SERIOUS
PERSONAL INJURY! VESA mount installation should be performed by a professional
technician; please contact the service technician or your retailer if you need this
service.
18.
CLASSIFICATION:
Supply Class I adapter
No applied part
IP54
Continuous Operation
Not AP or APG category
19.
Disconnect device: Appliance inlet.
20.
21.
Follow national, state or local requirements to dispose of unit.
Maintenance: to properly maintain and clean the surfaces, use only the
approved products or clean with a dry applicator.
22.
Contact information:
No.239, Sec. 2, Ti Ding Blvd., Taipei City 11493, Taiwan (R.O.C.)
TEL: +886-2-2162-1177
23.
24.
This equipment shall not be used as a life support system.
Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore all configurations shall comply with the system standard IEC
60601-1-1. Anyone who connects additional equipment to the signal input part or signal
output part is configuring a medical system, and is therefore, responsible that the
system complies with the requirements of the system standard IEC
60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certified
equipment in the patient environment and IEC 60XXX certified equipment out- side of
the patient environment. If in doubt, consult the technical services department or your
local representative.
25.
Users must not allow SIP/SOPs to come into contact with the patient at the same
time.
26.
The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. ECS disclaims all
responsibility for the accuracy of any statements contained herein.
Manual
TB71A-W Tablet PC User
TB71A-W Tablet PC User Manual
vi
Contents
Chapter
General Information ............................1
1.1
1.2
Introduction .............................................................................................. 2
Specifications .......................................................................................... 2
Table 1.1:
MICA Specification ................................................. 2
Cleaning/Disinfecting ............................................................................... 4
Dimensions .............................................................................................. 5
Figure 1.1 MICA Dimensions ....................................................... 5
1.3
1.4
Chapter
Getting Started.....................................7
2.1
A Quick Tour of MICA .............................................................................. 8
Figure 2.1 Front View ............................................................... 8
Figure 2.2 Left Side View........................................................... 8
Figure 2.3 Right Side View ....................................................... 9
Figure 2.4 Rear View ................................................................... 9
Figure 2.5 Top View ……........................................................... 10
A Quick Tour of MICA Docking Station (Optional) ................................. 10
Figure 2.6 Front View ............................................................. 10
Figure 2.7 Rear View of Docking Station ...................................10
Figure 2.8 Strap ........................................................................ 11
Installation Procedures........................................................................... 11
2.3.1 Install the Strap (Optional).......................................................... 11
Figure 2.9 Install the Strap......................................................... 11
2.3.2 Insert / Hang the Stylus (Optional)............................................. 11
Figure 2.10 Stylus...................................................................... 11
Figure 2.11 Secure the stylus.................................................... 12
2.3.3 Insert the MICA into the Docking Station (Optional)................... 12
Figure 2.12 Open and secure the protective cover.................... 12
Figure 2.13 TB71A-W in Docking Station.................................. 12
2.3.4 Connecting the Power Cord for the Docking Station.................. 13
Figure 2.14 Connecting the AC Adapter Power Supplier to the
Docking Station………………………………………………....... 13
2.3.5 Connecting the USB Charger to MICA...................................... 14
Figure 2.15 Connecting the AC Adapter Power Supplier to the
Docking Station……………………………………………............ 14
2.2
2.3
vii
Manual
TB71A-W Tablet PC User
TB71A-W Tablet PC User Manual
viii
Chapter
General Information
1.1 Introduction
MICA is a multimedia Atom Mobile processor-based computer that is designed to serve as a
Mobile Clinical Assistant (MCA). It is a PC-based system with 7" TFT LCD display and a
stereo audio controller. MICA is a simple, complete and highly integrated mobile multimedia
system which allows system integrators to easily build a Mobile Clinical Assistant Terminal
into their applications.
Common industrial applications include factory automation systems, precision machinery,
and production process control. It is also suitable for many non-industrial applications,
including interactive kiosk systems, entertainment management, and car park automation.
MICA is a reliable, cost-effective solution to meet an application’s processing requirements.
1.2 Specifications
Table 1.1: TB71A-W Specification
Item
Description
Dimensions (WþDþH)
121 mm x 200 mm x 14.5 / 24 mm (bottom / top)
Weight
400g
CPU and Chipset
Intel® Atom Processor Bay Trail - T Z3770
- 22 nm system-on-a-chip (SoC)
- 2M Cache, up to 2.39 GHz
Memory
LPDDR3 4G
Graphics
Intel® Integrated HD Graphics
Audio
Realtek ALC5642
I/O Ports
Internal Speaker x1, Internal microphone x 2, Receiver x1
Docking port x 1
SD card slot x 1
SIM card slot (Optional) x 1
Line out x 1
Display
7" TFT LCD Panel
Touch Panel
5-point P-cap touch panel
Max. Resolution
800 x 1280
Stylus Pen
Capacitive stylus pen
Storage
EMMC 32G
Communication
WiFi- 802.11 a/b/g/n WLAN (5 G/2.4 G)
Bluetooth V2.0+EDR / Bluetooth 4.0 LE
3G 850/900/1900/2100 Support HSPA+ (Optional)
GPS 850/900/1900/2100 Support HSPA+ (Optional)
NFC Support ISO14443, 1.0inch
Ingress Protection
IP54-rated, Alcohol resistant for cleaning purposes
Thermal Solution
Fanless Design
Operating System
Windows 8.1 Industry Pro 64Bits
Barcode Scanner
1D/2D Barcode scanner
Camera
8.0 Mega pixel camera with LED light
Auto-focus supported
MICA Tablet PC User Manual
Web Camera
2.0 Mega pixel VGA camera
Power button: On the top side of MICA
Barcode scanner buttons: Two orange buttons
Control Button
Volume control button
Home Key button
Programmable button (Default setting):
¢
Camera
snapshot
button
P1 for
S3 mode
P2 for WiFi on/off
Indicated LED
Power LED & Battery status LED

Full → Blue

Charging → Orange
Power Adapter
APD WA-20A05FU
INPUT: 100 ~ 240 V, 0.6 A Max., 50/60 Hz
OUTPUT: 5 V, 4 A
USB Charger
Chicony W12-010N3A
INPUT: 100 ~ 240 V, 0.5 A Max., 50/60 Hz
OUTPUT: 5 V, 2 A Max.
Battery
Model: MICA-071
Lithium-ion battery (3.7 V @ 4100 mAh)
4 Hr charging time
Operating Temperature
0° C ~ 40° C
Operating Humidity
10% ~ 90% @ 40° C, non-condensing
Storage Temperature
-20° C ~ 60° C
Storage Humidity
10% ~ 95%, non-condensing
Transportation Temperature
-20° C ~ 60° C Transportation
Humidity
10% ~ 95%, non-condensing
Certifications
Safety
FCC Part 15 Class B, UL, CE, CB60950, RoHS
Manual
TB71A-W Tablet PC User
1.3 Cleaning/Disinfecting
During normal use TB71A-W may become soiled and should, therefore, be cleaned
regularly.
Steps:
1.
Wipe TB71A-W with a clean cloth that has been moistened in the cleaning solution.
2.
Prepare agent per manufacturer’s instructions or hospital protocol.
3.
Wipe thoroughly with a clean cloth.
Caution!
Do not immerse or rinse TB71A-W or its peripherals. If you accidentally spill
liquid on the device, disconnect the unit from the power source. Contact your
Biomed personnel regarding the continued safety of the unit before placing it
back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean TB71A-W or its peripherals with strong aromatic,
chlorinated, ketone, ether, or other solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
Attention!
Ne pas immerger ou rincer TB71A-W ou ses périphériques. Si vous
renversez par accident un liquide sur l'appareil, débranchez l'appareil de la
source d'alimentation. Contactez votre Biomed concernant la sécurité
continue de l'unité avant de la remettre en service.
Ne pas pulvériser l'agent de nettoyage sur le châssis.
Ne pas utiliser de désinfectants contenant du phénol.
Ne pas passer à l'autoclave ou MICA propre ou ses périphériques avec
fortes, cétone, éther, ou d'autres solvants, des outils tranchants ou abrasifs
aromatiques chlorés. Ne jamais plonger connecteurs électriques dans l'eau
ou d'autres liquids.
TB71A-W Tablet PC User Manual
1.4 Dimensions
121mm
200mm
Figure 1.1 TB71A-W Dimensions
Manual
TB71A-W Tablet PC User
TB71A-W Tablet PC User Manual
Chapter
Getting Started
2.1 A Quick Tour of MICA
Before you start to set up TB71A-W, take a moment to become familiar with the locations
and purposes of the controls, drives, connections and ports, which are illustrated in the
figures below.
When placed upright on the desktop, the TB71A-W front panel appears as shown in Figure
2.1.
LED indicator
Ambient sensor
Receiver
Camera
Home Key
Figure 2.1 Front View
The volume control button, barcode scanner button and docking connector are on the left side
of the tablet PC.
Volume control button
Barcode scanner button
Docking connector
Hang hole
Figure 2.2 Left Side View
TB71A-W Tablet PC User Manual
The card slots, barcode scanner button and programmable buttons are on the right side of
the tablet PC.
Card Slots(Micro SD & SIM card)
Barcode scanner button
Programmable key
Hang hole
Figure 2.3 Right Side View
The rear view of the tablet PC is depicted in Figure 2.4.
Camera
Speaker
Camera flash
Figure 2.4 Rear View
Manual
TB71A-W Tablet PC User
The top side of the tablet PC contains power button, barcode scanner and headphone jack.
Headphone jack
Power button
Barcode scanner
Figure 2.5 Top View
2.2 A Quick Tour of TB71A-W Docking Holder
(Optional)
When you place the docking station on the desktop, its front panel appears as shown in Figure
2.6.
Docking connector
Figure 2.6 Front View
USB 3.0 USB 2.0 HDMI
port
ports
port
LAN
port
DC in jack
Figure 2.7 Rear View of Docking Station
TB71A-W Tablet PC User Manual
10
2.3 Installation Procedures
2.3.1 Install the Strap (Optional)
This strap is designed for the TB71A-W, which make the tablet convenient to hold.
Figure 2.8 Strap
a. Aim the triangle mark on the strap to the home key to slightly insert the bottom side of the
tablet into the strap.
b. Press to insert the top side of tablet into the strap.
Figure 2.9 Install the Strap
2.3.2 Insert / Hang the Stylus (Optional)
Figure 2.10 Stylus
11
Manual
TB71A-W Tablet PC User
a. Hang and secure the stylus through the hang hole of the TB71A-W.
b. Insert and secure the stylus onto the strap.
Figure 2.11 Secure the stylus
2.3.3 Insert the MICA into the Docking Station (Optional)
1. Open and turn the protective cover of the docking port to the opposite side and press to
lock it into its reserved slot.
Figure 2.12 Open and secure the protective cover
2. Align the docking port to the docking connector to insert the tablet into the docking station
and press it right into position.
Figure 2.13 TB71A-W in Docking Station
Note!
Before placing the tablet into the docking station, please make sure that the
protective cover of docking port is placed right into its reserved slot.
TB71A-W Tablet PC User Manual
12
2.3.4 Connecting the Power Cord for the Docking Station
Be sure to always handle the power cords by holding the plug ends only. Follow
these procedures in order:
1.
Insert the TB71A-W into the docking station as previous section 2.3.3.(See Figure
2.13).
2.
Connect the female end of the power cord to the DC-in jack of the docking station.
3.
Connect the 2-pin male plug of the power cord to an electrical outlet.
Step 2
Step 3
Figure 2.14 Connecting the AC Adapter Power Supplier to the Docking Station
13
TB71A-W Tablet PC User Manual
2.3.5 Connecting the USB Charger to MICA
Please follow these procedures in order:
1. Open and turn the protective cover of the docking port to the opposite side and
press to lock it into its reserved slot. (See Figure 2.12)
2. Connect the docking end of the USB charge cable to the docking port of MICA (See
Figure 2.14).
3. Connect the USB end of the USB charge cable to the USB charger.
4. Insert the 2-pin plug into an electrical outlet.
Step 2
Step 4
Step 3
Figure 2.15 Connecting the AC Adapter Power Supplier to the Docking Station
TB71A-W Tablet PC User Manual
14
www.ecs.com.tw
This guide is intended for reference purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.
© ELITEGROUP COMPUTER SYSTEM Co., Ltd. 2009

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2014:06:26 11:20:39+08:00
Creator Tool                    : Microsoft® Word 2013
Modify Date                     : 2014:06:26 16:26:51+08:00
Metadata Date                   : 2014:06:26 16:26:51+08:00
Format                          : application/pdf
Creator                         : Cathy Mo
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:dacffe3e-48e6-4855-8619-b5596281f2ff
Instance ID                     : uuid:dcafd54e-e9fa-4834-9720-886bc0b986bb
Page Count                      : 24
Language                        : zh-TW
Author                          : Cathy Mo
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WL6TB71A-W

Navigation menu