ELITEGROUP COMPUTER SYSTEMS TLBC1IE1 Wireless Motherboard User Manual
ELITEGROUP COMPUTER SYSTEMS CO., LTD Wireless Motherboard
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2194932 |
| Application ID | 4jy1DSZoZFNvEAK9iKg2vw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 32.9kB (411298 bits) |
| Date Submitted | 2014-02-20 00:00:00 |
| Date Available | 2014-02-21 00:00:00 |
| Creation Date | 2014-02-07 16:33:20 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2014-02-14 18:17:38 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | apple |
TL10IE2 Motherboard Guide FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: WL6-TLBC1IE1” Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. This radio transmitter FCC ID: WL6-TLBC1IE1 has been approved by FCC to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 2.72 dBi for 2.4GHz JEM_WLAN MAIN 13B130-JU PIFA 9072 Antenna JEM_WLAN AUX 13B130-JU PIFA 9073 Antenna 2.94 dBi for 2.4GHz WGT_WLAN MAIN 13B130-JU PIFA Antenna 9050 1.78 dBi for 2.4GHz WGT_WLAN AUX 13B130-JU PIFA Antenna 9051 2.66 dBi for 2.4GHz 0.47 dBi for 2.4GHz JEM_WLAN 13B130-JU PIFA MAIN for 3G Antenna 9074 SKU WGT_WLAN 13B130-JU PIFA MAIN for 3G Antenna 9052 SKU 2.03 dBi for 2.4GHz 2. 2.14 dBi for 5 GHz Note: The antenna connector is I-PEX type. 2.94 dBi for 5 GHz 1.19 dBi for 5 GHz 2.93dBi for 5 GHz 1.20 dBi for 5 GHz 3.16 dBi for 5 GHz Motherboard layout Main components No. Name No. Name DDR RF chip EMMC CPU PMIC System connectors No. Name No. Name Pen charger CONN LCD Connector 5MP camera Battery CONN Lens led 10 NFC CONN 1.26MP camera 11 WiFi Aux Antenna Connector WiFi Main Antenna Connector Sar sensor 12 Touch controller board CONN Speaker CONN 13 14 Dock power Connector Dock signal I/O Ports and Buttons No. Name No. Name Power port 3G SIM card slot USB port Mini HDMI port Headphone plug Micro SD card slot Screen rotation lock button Power button Features Processor Intel Bay Trail‐ T 2.4 GHz Quad-core Memory DDR3L-RS, 1333MT/s 2GB only Storage Single eMMC v4.51 Wireless Wi-Fi 802.11 a/b/g/n Bluetooth 4.0 NFC support Resolution: 1366(H) × 3 (RGB) × 768(V) pixels Support 10-points multi-touch Display Cameras Input/Output Speaker Front camera: 1.26 M MIPI-CSI Rear camera: 5.0 M MIPI-CSI Normal non-mirror mode 1 x USB 3.0 (Type A) 1 x Mic/head phone jack combo 1 x micro-HDMI port 1 x micro-SD card slot 1 x DC-in jack 3G SIM card support Build-in Speaker x 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2014:02:07 16:33:20+08:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2014:02:14 18:17:38+08:00 Metadata Date : 2014:02:14 18:17:38+08:00 Format : application/pdf Creator : apple Producer : Microsoft® Word 2010 Document ID : uuid:46e03844-963c-480d-89f9-9a784063fc1f Instance ID : uuid:fe13e332-21a8-45f0-9e81-cdb75100ba63 Page Count : 9 Language : zh-TW Author : appleEXIF Metadata provided by EXIF.tools