ENTERMEDIA RX01-CC85A Wireless MIC receiver module User Manual
ENTERMEDIA CO., LTD. Wireless MIC receiver module Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3004247 |
| Application ID | MgRqk502RKqPiLzJX8Elkw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 11.85kB (148089 bits) |
| Date Submitted | 2016-05-25 00:00:00 |
| Date Available | 2016-11-21 00:00:00 |
| Creation Date | 2017-12-06 14:23:09 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-06 14:23:09 |
| Document Title | PowerPoint í”„ë ˆì í…Œì´ì…˜ |
| Document Creator | Microsoft® Office PowerPoint® 2007 |
| Document Author: | YSW |
RX01-CC85A Manual Product Overview 1. Overview • Wireless Receiver Module with TI CC8530 2. Specifications 사용 주파수 ① Transmission : 2406~2474MHz ② Reception : 2406~2474MHz ③ RF Power: 0.003 W/MHz • Power: DC 5 V • External Communication : UART 1CH. • Audio CH: I2S 1CH. Communication Interface • UART Protocol 1) UART Interface Baudrate : 9600BPS Data : 8bit Parity : None 2) Data framing 0xF3: 0xF6: 0xD6: 0xE0: Mic ON/OFF Mic1 Volume Mic2 Volume Mic Link Info Approval Information 1 KCC 2 FCC compliance Information FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Including interference that may cause undesired operation. Modifications not expressly approved by the manufacturer could void the user’s authority To operated the equipment under FCC rules. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter Module FCC ID : PBNRX01-CC85A CAUTION : This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. End users cannot modify this transmitter device. Any unauthorized modification could void the user’s authority to operate this device. This module is limited to installation in mobile or fixed applications. IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1)The transmitter module may not be co-located with any other transmitter or antenna, 2)OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : YSW Create Date : 2016:05:12 14:53:20+09:00 Modify Date : 2016:05:12 14:53:26+09:00 Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : YSW Title : PowerPoint 프레젠테이션 Creator Tool : Microsoft® Office PowerPoint® 2007 Metadata Date : 2016:05:12 14:53:26+09:00 Producer : Microsoft® Office PowerPoint® 2007 Document ID : uuid:bf4cb581-ef81-4e0a-8806-e58a1f0f8f57 Instance ID : uuid:29a0ccfe-0d8c-4549-98d5-a00945ed9192 Page Count : 6EXIF Metadata provided by EXIF.tools