ESPRESSIF SYSTEMS ESPWROOM02U Wi-Fi Internet of Things Module User Manual ESP WROOM 32U Getting Started Guide EN pages

ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD Wi-Fi Internet of Things Module ESP WROOM 32U Getting Started Guide EN pages

Users Manual

!Version 1.0 Copyright © 2017ESP-WROOM-02U Getting Started Guide
About This Guide This document takes ESP-LAUNCHER and ESP-WROOM-02U as examples to introduce how to use the ESP8266 SDK. The contents include preparations before compilation, SDK compilation and firmware download. The document is structured as follows. Release Notes ChapterTitleContentChapter 1OverviewIntroduction to the overall procedure of using the SDK, and familiarization with the HDK, FW and toolkit of the ESP8266.Chapter 2Preparing the HardwareHardware configuration and setup for programming, illustrated with two examples, ESP-LAUNCHER and ESP-WROOM-02U.Chapter 3Preparing the SoftwarePresentation of the non-OS SDK and RTOS SDK. Information on the tools for compiling the SDK and downloading the firmware.Chapter 4Flash MapsAddresses and layout specifications for downloading the firmware to flash memory. Explanation of the OTA and non-OTA firmware.Chapter 5Compiling the SDKIntroductions on how to compiling the SDK using the relevant tools.Chapter 6Downloading the FirmwareIntroductions on how to download the firmware with download tools.Appendix AConfiguring ISSI & MXIC Flash QIO ModeIntroduction to ISSI & MXIC Flash QIO mode.Appendix BLearning ResourcesList of ESP8266-related must-read documents and must-have resources.DateVersionRelease notes2017.11V1.0First release.
Table of Contents 1. Overview 1 ................................................................................................................................1.1. Procedure Overview!1"...................................................................................................................1.2. ESP8266 HDK!1"............................................................................................................................1.3. ESP8266 SDK!2"............................................................................................................................1.3.1. Non-OS SDK!2".................................................................................................................1.3.2. RTOS SDK!2"....................................................................................................................1.4. ESP8266 FW!2"..............................................................................................................................1.5. ESP8266 Toolkit!3".........................................................................................................................1.5.1. Compiler!3".......................................................................................................................1.5.2. Firmware Download Tool!3"..............................................................................................1.5.3. Serial Port Debug Tool!3"..................................................................................................2. Preparing the Hardware 5 ........................................................................................................2.1. ESP-LAUNCHER!5"........................................................................................................................2.2. ESP-WROOM-02U!6".....................................................................................................................3. Preparing the Software 8 ..........................................................................................................3.1. Non-OS SDK!8"..............................................................................................................................3.2. RTOS SDK!8".................................................................................................................................3.3. ESP8266 Toolkit!10".......................................................................................................................3.3.1. Compiler!10".....................................................................................................................3.3.2. Firmware Download Tool!12"............................................................................................4. Flash Maps 13 ...........................................................................................................................4.1. Non-OTA!14"..................................................................................................................................4.1.1. Flash Map!14"...................................................................................................................4.1.2. Download Addresses!15"..................................................................................................4.2. OTA Firmware!15"...........................................................................................................................4.2.1. Flash Map!15"...................................................................................................................4.2.2. Download Addresses!16"..................................................................................................5. Compiling the SDK 17 ..............................................................................................................5.1. Preparations!17".............................................................................................................................5.1.1. Modifying SDK Files!17"...................................................................................................
5.1.2. Downloading SDK Files!18"..............................................................................................5.2. Compilation!19"..............................................................................................................................5.2.1. Compile ESP8266_NONOS_SDK_v0.9.5 and Later Versions!19"....................................5.2.2. ESP8266_NONOS_SDK_v0.9.4 and Earlier Versions!20".................................................6. Downloading the Firmware 21 .................................................................................................6.1. Download Procedure!21"...............................................................................................................6.2. Check Log File!23".........................................................................................................................6.2.1. ESP8266 IOT Demo!23"....................................................................................................6.2.2. ESP8266 AT!24"................................................................................................................6.3. Configuration of RF initialization (Optional)!24"..............................................................................6.3.1. Configuration of RF InitConfig Options!25"......................................................................6.3.2. Configuration of RF InitConfig Parameters!26".................................................................6.3.3. Configuration Examples!28".............................................................................................A. Appendix—Configuring ISSI & MXIC Flash QIO Mode 30 ......................................................B. Appendix—Learning Resources 31 .........................................................................................B.1. Must-Read Documents!31"............................................................................................................B.2. Must-Have Resources!32..............................................................................................................
!1. Overview1. Overview 1.1. Procedure Overview Figure 1-1 shows the overall procedure of the SDK compilation. ! Figure 1-1 Procedure Overview 1.2. ESP8266 HDK The ESP8266 HDK (Hardware Development Kit) includes the chip—ESP8266EX, the module—ESP-WROOM-02U and the development board—ESP-LAUNCHER. Users can download the pre-compiled firmware using ESP-WROOM-02U or ESP-LAUNCHER. ESP8266 HDKChapter 6. Downloading the FirmwareChapter 5. Compiling the SDKESP8266 FWESP8266 SDKESP8266 ToolkitCompilerTool DownloadTool Download ESP-WROOM-02SDK DownloadChapter 4. Flash MapChapter 3. Preparing the SoftwareESP-LAUNCHERChapter 2. Preparing the Hardware📖 Notes: •If users use other development boards or modules that integrate ESP8266EX, please use the development firmware provided by the corresponding manufacturers. •If users would like to purchase ESP-WROOM-02U or ESP-LAUNCHER, please visit Espressif’s official online store at: https://espressif.taobao.com,Espressif!/3312017.11
!1. Overview1.3. ESP8266 SDK The ESP8266 Software Development Kit (SDK) is an Internet of Things (IoT) application development platform developed by Espressif for developers. It includes such examples of application development as Smart Lights and Smart Plugs. Depending on whether they are based on an operating system (OS), SDKs can be categorized into two types: Non-OS SDK and RTOS SDK. 1.3.1. Non-OS SDK Non-OS SDK is not based on an operating system. It supports the compilation of IOT_Demo and AT commands. Non-OS SDK uses timers and callbacks as the main way to perform various functions such as nested events and functions triggered by certain conditions. Non-OS SDK uses the espconn network interface; users need to develop their software according to usage rules of the espconn interface. 1.3.2. RTOS SDK RTOS SDK is based on FreeRTOS, open-source software development on Github. •The FreeRTOS SDK is based on FreeRTOS , a multi-tasking OS. Users can use standard interfaces to realize resource management, recycling operations, execution delays, inter-task messaging and synchronization, and other task-oriented process design approaches. For the specifics of interface methods, please refer to the official website of FreeRTOS or USING THE FreeRTOS REAL TIME KERNEL—A Practical Guide •The network operation interface in RTOS SDK is the standard lwIP API. RTOS SDK provides a package which enables a BSD Socket API interface. Users can directly use the socket API to develop software applications; and port to ESP8266 other applications from other platforms using the socket API, effectively reducing the learning costs arising from switching platforms. •RTOS SDK introduces cJSON library whose functions make it easier to parse JSON packets. •RTOS is compatible with non-OS SDK in Wi-Fi interfaces, SmartConfig interfaces, Sniffer related interfaces, system interfaces, timer interfaces, FOTA interfaces and peripheral driver interfaces, but does not support AT implementation. 1.4. ESP8266 FW ESP8266 FW (Firmware) has been provided in binary format files (.BIN) that can be downloaded directly to the HDK. Users can choose between Over-The-Air (OTA) and non-OTA firmware. For detailed information, please refer to Table 1-1. Espressif!/3322017.11
!1. Overview1.5. ESP8266 Toolkit 1.5.1. Compiler Linux OS is required to compile the ESP8266 SDK. When using Windows OS, we recommend VirtualBox as the virtual machine for ESP8266. In order to simplify the compilation procedure, we have installed the compiling tools on the virtual machine. Users can directly compile the ESP8266 SDK by importing the ESP8266 compiler (OVA image) into the virtual machine. 1.5.2. Firmware Download Tool The ESP8266 DOWNLOAD TOOL is the official firmware download tool developed by Espressif. Users can download multiple binaries to the SPI Flash of the ESP8266 mother board (ESP-LAUNCHER or ESP-WROOM-02U) at the same time according to the actual compilation mode and flash size. 1.5.3. Serial Port Debug Tool The serial port debug tool can be used to directly communicate with the ESP8266 module over a standard RS-232 port. For PCs that do not have a physical serial port, a virtual com port (USB-to-serial converter) can be used. Table 1-1. ESP8266 FWBinariesCompulsory or optionalDescriptionNon-OTAOTAmaster_device_key.binOptionalUsers can apply for it from Espressif Cloud to get Espressif Cloud service.☑☑esp_init_data_default.binCompulsoryDefault system parameters provided in SDK.☑☑blank.binCompulsoryDefault system parameters provided in SDK.☑☑eagle.flash.binCompulsoryMain program compiled from SDK.☑❌eagle.irom0text.binCompulsoryMain program compiled from SDK.☑❌user1.binCompulsory for first usage.Main program compiled from SDK.❌☑user2.binUsed in firmware upgrade.Main program compiled from SDK.❌☑📖 Notes: •For the contents of SDK, please refer to Chapter 3, "Preparing the Software". •For SDK compilation, please refer to Chapter 5, "Compiling the SDK". •For the addresses of binaries in the flash, please refer to Chapter 4, "Flash Maps".Espressif!/3332017.11
!1. OverviewUsers may directly input commands into the terminal and view or record responses in real time. 📖 Note: We recommend CoolTerm (for Windows and Mac OS) and Minicom (for Linux OS) as the serial port debug tool.Espressif!/3342017.11
!2. Preparing the Hardware2. Preparing the Hardware Depending on whether the ESP-LAUNCHER or the ESP-WROOM-02U is used, users will need either of the hardware mentioned in Table 2-1 below: 2.1. ESP-LAUNCHER 1. Connect PC to the USB-UART interface of ESP-LAUNCHER using the USB cable. 2. Set ESP-LAUNCHER to download mode. 3. Connect the USB-to-TTL converter to the PC. 4. Power on ESP-LAUNCHER by sliding the Power Switch towards the inner side. Table 2-1. Hardware PreparationsESP-LAUNCHERESP-WROOM-02U• 1 × ESP-LAUNCHER • 1 × USB cableOR• 1 × ESP-WROOM-02U • 1 × USB-to-TTL converter (FT232R recommended) • 6 × Dupont lines • 1 × soldering tool suite1 × PC with pre-installed Windows OS⚠ Notice: The ESP8266 Wi-Fi module needs a 3.3V power supply and may draw a minimum current of 500 mA.StepsResult•Slide Power Switch towards the outer side as the figure on the right 👉 shows. •Slide GPIO0 Control towards the inner side to enable ESP-LAUNCHER's download mode. ⚠ Notice: J82 must be shorted by a jumper, otherwise code cannot be downloaded to the board.!11GPIO0 ControlPower SwitchUSB-serial CableUSB-UARTChip SwitchJ82📖 Note: Make sure that the proper driver for the USB-to-TTL converter is installed and recognized by the PC.Espressif!/!5 332017.11
!2. Preparing the Hardware5. Power on the chip by sliding the Chip Switch towards the outer side. 6. Download firmware to flash with the ESP8266 DOWNLOAD TOOL. 7. After downloading, slide the GPIO0 Control towards the outer side to enable ESP-LAUNCHER's working mode. 8. Power on the chip again with the Chip Switch and the chip will read and run programs from the flash. ——🔚 For more information on the ESP-LAUNCHER hardware, please refer to ESP8266 System Description. 2.2. ESP-WROOM-02U 1. Lead out the pins of the ESP-WROOM-02U, as shown in Table 2-2. 2. Connect ESP-WROOM-02U to the USB-to-TTL converter, using Dupont lines, as shown in Figure 2-1. 📖 Note: On how to download firmware, please refer to Chapter 4, "Flash Map" and Chapter 6, "Downloading the Firmware".Table 2-2. ESP-WROOM-02U PinsPinPin statusENPull up3V33.3V power supply (VDD)IO15Pull downIO0UART download: pull down; Flash boot: floating/pull upGNDGNDRXDReceive-end in UART downloadTXDTransmit-end in UART download; floating/pull upEspressif!/!6 332017.11
!2. Preparing the Hardware! ! Figure 2-1. ESP-WROOM-02U Download Mode 3. Connect the USB-to-TTL converter to the PC. 4. Download firmware to flash with the ESP8266 DOWNLOAD TOOL. 5. After downloading, switch ESP-WROOM-02U to working mode."Set IO0 as floating or pull-up. 6. Power on ESP-LAUNCHER again and the chip will read and run programs from the flash. ——🔚 EN3V3ESP-WROOM-023V3TXDRXDTXDRXDGNDGNDIO15 IO0USB-to-TTL converterPC📖 Note: On how to download firmware, please refer to Chapter 4, "Flash Maps" and Chapter 6, "Downloading the Firmware".📖 Notes: •IO0 is an internal pull-up pin. •For more information on ESP-WROOM-02U hardware, please refer to ESP8266 System Description and ESP-WROOM-02 Datasheet.Espressif!/!7 332017.11
!3. Preparing the Software3. Preparing the Software 3.1. Non-OS SDK Users can download the non-OS SDK (including application examples) from:"http://www.espressif.com/en/support/download/sdks-demos?keys=&field_type_tid%5B%5D=14. Figure 3-1 shows the directory structure of the non-OS SDK. ! Figure 3-1. Non-OS SDK Directory Structure •bin: compiled binaries to be downloaded directly into the flash. •documents: SDK-related documents or links. •driver_lib: library files that drive peripherals, such as UART, I2C and GPIO. •examples: sample codes for secondary development, for example, IoT Demo. •include: header files pre-installed in SDK. The files contain relevant API functions and other macro definitions. Users do not need to modify them. •ld: linker scripts. We suggest users not modifying them without any specific reasons. •lib: library files provided in SDK. •tools: tools needed for compiling binaries. Users do not need to modify them. 3.2. RTOS SDK Users can download RTOS SDK and its application examples (ESP8266_IOT_PLATFORM) from: •RTOS SDK"https://github.com/espressif/ESP8266_RTOS_SDK Espressif!/!8 332017.11
!3. Preparing the Software•ESP8266_IOT_PLATFORM"https://github.com/espressif/ESP8266_IOT_PLATFORM Table 3-2 shows the directory structure of the RTOS SDK. ! Figure 3-2. RTOS SDK Directory Structure •bin: boot and initialization firmware. •documents: ESP8266_RTOS_SDK files. •driver_lib: sample codes of drivers. •examples: sample codes for Espressif’s application programs. -openssl_demo: sample codes of the openssl API function. -project_template: sample codes of project templates. -smart_config: sample codes of SmartConfig. -spiffs_test: sample codes of the spiffs file system function. -websocket_demo: sample codes of web socket. •include: header files of ESP8266_RTOS_SDK, including software interfaces and macro functions for users to use. •ld: link files used when compiling; users do not need to modify them. •lib: library file of ESP8266_RTOS_SDK. •third_party: third-party library of Espressif’s open-source codes, currently including free RTOS, JSON, lwIP, mbedTLS, noPoll, OpenSSL, spiffs, and SSL. •tools: tools needed for compiling binaries; users do not need to modify them. Espressif!/!9 332017.11
!3. Preparing the Software3.3. ESP8266 Toolkit 3.3.1. Compiler Please download VirtualBox from: https://www.virtualbox.org/wiki/Downloads. Please download the compiler ESP8266_lubuntu_20141021.ova from: http://downloads.espressif.com/FB/ESP8266_GCC.zip 📖 Note: Please choose the right version of VirtualBox according to the host machine's OS.StepsResults1. Start Windows OS and install the virtual machine.•Double-click VirtualBox-5.0.16-105871-Win.exe and install VirtualBox. 📖 Note: VirtualBox has different versions. We are using Windows V.5.0.16 as an example. •Double-click Oracle VM VirtualBox.exe to run the program, and the system will show the main menu 👉. 💬Tip: The ESP8266 virtual machine takes up much space (memory). Please reserve enough space for it.2. Import the image file.!Espressif!/!10 332017.11
!3. Preparing the Software•Select File > Import Appliance, and a dialog box will show up 👉. •Select the image file to import, for example, C:\ESP8266_lubuntu_20141021.ova, and click Next. •Click Import to confirm the settings.3. Create a shared folder.•Create a new folder named D:\VM\share. •Select Machine > Settings > Shared Folders…, and a dialog box will show up 👉. •Select the shared folder in Machine Folders, for example, D:\VM\share. 4. Run the virtual machine.StepsResults Espressif!/!11 332017.11
!3. Preparing the Software3.3.2. Firmware Download Tool Please download the ESP8266 DOWNLOAD TOOL from: http://www.espressif.com/support/download/other-tools. •After importing, a virtual machine named ESP8266_lubuntu shows up 👉. •Double-click ESP8266_lubuntu or Start to run the virtual machine.StepsResults •The system shows the ESP8266 virtual machine 👉. •If a dialog box like the one below👇 shows up, please enter the password: espressif. ! Espressif!/!12 332017.11
!4. Flash Maps4. Flash Maps This chapter provides the flash maps for OTA firmware and non-OTA firmware in flash memories with a different capacity. Users can modify the map as needed. Figure 4-1 shows the flash maps for the two different types of firmware. ! Figure 4-1. Flash Maps •System Program: this area stores the firmware necessary for the system to run. •User Data: If system data do not take up all the flash memory, the remaining area can be used to store user data. •User Param: Users can define the address. In IOT_Demo, the four sectors starting from 0x3C000 are defined as the user parameter area. Users can define any available address for this area. System Programeagle.flash.bin User Data System Programeagle.irom0text.bin User DataUser Parammaster_device_key.binSystem Param (16 kB) blank.binesp_init_data_default.binSystem Program1.bin User DataUser Parammaster_device_key.binSystem Param (16 kB) blank.binesp_init_data_default.binSystem Program2.bin User DataPartition 1 Partition 2Partition 1 Partition 2Boot Data ReservedNon-FOTAFOTA📖 Note: For ESP8266 firmware, please refer to Section 1.3, "ESP8266 FW".Espressif!/!13 332017.11
!4. Flash Maps-master_device_key.bin: In IOT_Demo, it is located in the third sector of user parameter area. •System Param: this area contains the last four sectors of the flash. -blank.bin: the download address is the second-to-last sector in the flash. -esp_init_data_default.bin: the download address is the fourth-to-last sector of flash. •Boot Data: It is located in Partition 1 of OTA firmware, and stores OTA-related data. •Reserved: It is a reserved area in Partition 2 of OTA firmware, corresponding to the Boot data area in Partition 1 of OTA firmware. 4.1. Non-OTA 4.1.1. Flash Map For flash memories with different capacity levels, the storage space of eagle.irom0text.bin is limited. Users can change the limit by modifying ESP8266_NONOS_SDK/ld/eagle.app.v6.ld. Users can modify the len field in irom0_0_seg, as shown in Figure 4-2 (red rectangle). The location of irom0.text varies across different versions of SDK. Users must consult the eagle.app.v6.ld file and ensure that they are downloading eagle.irom0.text.bin to the correct offset in the flash. The address in the blue rectangle marks the location of eagle.irom0.text.bin in the flash. ! Figure 4-2. Location for irom0.text Table 4-1 shows the storage limits of eagle.irom0text.bin with different len values. 📖 Notes: •Each sector of the flash is 4 KB. •For detailed download addresses, please refer to the following sections..Table 4-1. Non-OTA Flash Map (unit: KB)Flash capacityeagle.flash.bineagle.irom0text.binUser datalenUser/System Param512≤ 64≤ 240≥ 1760x3C000161024≤ 64≤ 752≥ 1760xBC00016Espressif!/!14 332017.11
!4. Flash Maps4.1.2. Download Addresses Table 4-2 lists the download addresses for non-OTA firmware. 4.2. OTA Firmware 4.2.1. Flash Map Table 4-3 lists the download addresses for the OTA firmware. 2048≤ 64≤ 768≥ 1760xC0000164096≤ 64≤ 768≥ 1760xC0000168192≤ 64≤ 768≥ 1760xC00001616*1024≤ 64≤ 768≥ 1760xC000016Flash capacityeagle.flash.bineagle.irom0text.binUser datalenUser/System Param📖 Note: ESP8266 presently only supports a System Param area of up to 1024 KB.Table 4-2. Download Address for Non-OTA Firmware (unit: KB)BinariesDownload addresses in flash with different capacities512102420484096819216*1024master_device_key.bin0x3E000esp_init_data_default.bin0x7C0000xFC0000x1FC0000x3FC0000x7FC0000xFFC000blank.bin0x7E0000xFE0000x1FE0000x3FE0000x7FE0000xFFE000eagle.flash.bin0x00000eagle.irom0text.bin0x10000📖 Notes: •In general, ESP Flash Download Tool can be used to download firmware into flash. •But for 8 MB or 16 MB flash, please use esptool instead.Table 4-3. OTA Flash Map (unit: KB)Flash capacitybootuser1.binuser2.binUser/System ParamUser data5124≤ 236≤ 23616≥ 010244≤ 492≤ 49216≥ 0Espressif!/!15 332017.11
!4. Flash Maps4.2.2. Download Addresses Table 4-4 lists the download addresses for the OTA firmware. 2048 (Partition 1 = 512)4≤ 492≤ 49216≥ 10242048 (Partition 1 = 1024)4≤ 1004≤ 100416≥ 04096 (Partition 1 = 512)4≤ 492≤ 49216≥ 30724096 (Partition 1 = 1024)4≤ 1004≤ 100416≥ 20488192 (Partition 1 = 1024)4≤ 1004≤ 100416≥ 614416384 (Partition 1 = 1024)4≤ 1004≤ 100416≥ 14336Flash capacitybootuser1.binuser2.binUser/System ParamUser dataTable 4-4. Download Addresses for OTA Firmware (unit: KB)BinariesDownload addresses in flash with different capacities512102420484096819216384512+5121024+1024512+5121024+10241024+10241024+1024master_device_key.bin0x3E0000x7E0000x7E0000xFE0000x7E0000xFE0000xFE0000xFE000esp_init_data _default.bin0x7C0000xFC0000x1FC0000x3FC0000x7FC0000xFFC000blank.bin0x7E0000xFE0000x1FE0000x3FE0000x7FE0000xFFE000boot.bin0x00000user1.bin0x01000user2.bin0x410000x810000x810000x101000 0x810000x101000 0x101000 0x101000 📖 Notes: •In general, ESP Flash Download Tool can be used to download firmware into flash. •But for 8 MB or 16 MB flash, please use esptool instead. •For OTA firmware, users do not need to download user2.bin, but upgrade the firmware via the cloud server. •For details on the functional description of OTA firmware, please refer to ESP8266 FOTA Guide.Espressif!/!16 332017.11
!5. Compiling the SDK5. Compiling the SDK 5.1. Preparations 5.1.1. Modifying SDK Files 1. Start Windows OS. 2. Modify files in ESP8266_NONOS_SDK/examples/IoT_Demo/include according to the flash map. •Modify #define󰐇PRIV_PARAM_START_SEC in user_light.h and user_plug.h. ! •Modify #define󰐇ESP_PARAM_START_SEC in user_esp_platform.h. ! Table 5-1 lists the modified values. 📖 Notes: •This chapter demonstrates how to compile the SDK by taking ESP8266_NONOS_SDK/examples/IoT_Demo as an example. •IoT_Demo defines three types of devices, i.e., LIGHT_DEVICE, PLUG_DEVICE and SENSOR_DEVICE in examples>IoT_Demo/include/user_config.h. Users can only configure one device at a time. The default device for configuration is LIGHT_DEVICE.📖 Note: Users need to modify the SDK files if using the OTA firmware.Table 5-1. Modify the Field Values in the "include" File (unit: kB)Default value (512)Modified values51210242048 (512+512)2048 (1024+1024)4096 (512+512)4096 (1024+1024)8192 (1024+1024)16384 (1024+1024)0x3C-0x7C0x7C0xFC0x7C0xFC0xFC0xFC0x3D-0x7D0x7D0xFD0x7D0xFD0xFD0xFDEspressif!/!17 332017.11
!5. Compiling the SDK5.1.2. Downloading SDK Files 1. Start Linux OS. 2. Run LXTerminal on the desktop of the virtual machine. 3. Copy the files to be compiled to the shared folder. 4. Download shared directory. 5. Set the variable PATH to point to SDK and binaries. export󰐇SDK_PATH=~/Share/ESP8266_RTOS_SDKexport󰐇BIN_PATH=~/Share/ESP8266_RTOS_SDK/bin📖 Note: Users need not modify the SDK files if using a 512-KB flash.StepsResults•Copy ESP8266_NONOS_SDK folder to the shared directory, for example, C:\VM\share. •Copy IoT_Demo folder to C:\VM\share\ESP8266_NONOS_SDK, as shown in the figure on the right 👉.StepsResults•Execute ./mount.sh. •Input the password: espressif."Downloading shared files is completed. •Open the shared directory ESP8266_NONOS_SDK in the virtual machine and confirm whether the download has been successful. - If successful, the directory contains such files as those in the figure on the right 👉. - If not, the directory will be empty, and users will need to go over this step again.⚠ Notice: If users use the RTOS SDK, please continue with the following steps; if use the non-OS SDK, please skip Step 5.Espressif!/!18 332017.11
!5. Compiling the SDK5.2. Compilation 5.2.1. Compile ESP8266_NONOS_SDK_v0.9.5 and Later Versions 1. Switch to the /Share/ESP8266_NONOS_SDK/IoT_Demo directory in the terminal. cd󰐇/home/esp8266/Share/ESP8266_NONOS_SDK/IoT_Demo./gen_misc.shThe system shows the following information: gen_misc.sh󰐇version󰐇20150511Please󰐇follow󰐇below󰐇steps(1-5)󰐇to󰐇generate󰐇specific󰐇bin(s):2. Select the required options as shown in Figure 5-1. ! Figure 5-1. Compile SDK 📖 Note: Users can add it to .bashrc file, otherwise Step 5 needs to be repeated each time the compiler is restarted.0120STEP 1: choose boot version(0=boot_v1.1, 1=boot_v1.2+, 2=none)enter(0/1/2, default 2)STEP 2: choose bin generate(0=eagle.flash.bin+eagle.irom0text.bin, 1=user1.bin, 2=user2.bin)enter (0/1/2, default 0)FOTA? NNew version?YNYFirst-time usage?2N1Y01 2 3STEP 3: choose spi speed(0=20MHz, 1=26.7MHz, 2=40MHz, 3=80MHz)enter (0/1/2/3, default 2) 0 1 2 3STEP 4: choose spi mode(0=QIO, 1=QOUT, 2=DIO, 3=DOUT)enter (0/1/2/3, default 0)0 2 3STEP 5: choose spi size and map0= 512KB( 256KB+ 256KB)enter (0/2/3/4/5/6, default 0)Choose as requiredChoose as requiredChoose as required4 5 6Example OptionEspressif!/!19 332017.11
!5. Compiling the SDK3. After compilation, the generated binaries and the addresses in flash are shown as follows: Generate󰐇user1.2048.new.3.bin󰐇successfully󰐇in󰐇folder󰐇bin/upgrade.boot.bin------------>0x00000user1.2048.new.3.bin--->0xSupport󰐇boot_v1.2󰐇and󰐇+01000!!!−−🔚 5.2.2. ESP8266_NONOS_SDK_v0.9.4 and Earlier Versions For ESP8266_NONOS_SDK_v0.9.4 and previous versions, the compilation process is as follows: 1. Execute ./gen_misc_plus.sh 1 to generate user1.bin under the"/ESP8266_NONOS_SDK/bin/upgrade path. 2. Execute make󰐇clean to clear previous compilation data. 3. Execute ./gen_misc_plus.sh󰐇2 to generate user2.bin under the"/ESP8266_NONOS_SDK/bin/upgrade path. 📖 Notes: •The sample options are marked in green. Users can select the right options as needed. •For OTA and non-OTA firmware, please refer to Section 1.4, "ESP8266 FW". •Only sdk_v1.1.0 + boot 1.4 + flash download tool_v1.2 and higher versions support options 5 and 6 in Step 5. •After compiling user1.bin, execute make󰐇clean first to clear the temporary files generated by the last compilation, and then compile user2.bin. •For the flash map in Step 5, please refer to Chapter 4, "Flash Maps".📖 Note: Users can open the /home/esp8266/Share/ESP8266_NONOS_SDK/bin directory and check the compiled binaries.📖 Note: ESP8266_NONOS_SDK_v0.7 and earlier are non-OTA firmware.Espressif!/!20 332017.11
!6. Downloading the Firmware6. Downloading the Firmware 6.1. Download Procedure 1. Start Windows OS. 2. Double-click ESP_DOWNLOAD_TOOL.exe to open Flash tool.  Figure 6-1. ESP8266 DOWNLOAD TOOL—SPIDownload SPIDownloadFor SPI Flash download.HSPIDownloadFor HSPI Flash download.RFConfigRF initialization Configuration.MutiDownloadFor multi-mother boards download.Espressif!/!21 332017.11
!6. Downloading the Firmware3. Double-click ! in Download Path Config panel to select the binaries to be downloaded. Set the corresponding download addresses in ADDR. 4. Configure SPIDownload. 📖 Note: The binaries to be downloaded and the corresponding addresses vary with different SPI Flash sizes and actual demands. For details, please refer to Chapter 4, "Flash Maps".Table 6-1. SPIDownload ConfigurationItemsDescriptionSPI FLASH CONFIGCrystalFreqSelect the crystal frequency according to the crystal oscillator used.CombineBinCombine the selected binaries into target.bin with the address 0x0000.DefaultSet the SPI Flash to the default value.SPI SPEEDSelect SPI read/write speed with the maximum value of 80 MHz.SPI MODESelect SPI mode according to the SPI Flash used. If the flash is Dual SPI, select DIO or DOUT. If the flash is Quad SPI, select DIO or DOUT. ⚠ Notice: If ISSI Flash is used, please refer to Appendix, "Configure ISSI & MXIC Flash QIO Mode".FLASH SIZESelect the flash size according to the flash type. 📖 Note: 16Mbit-C1 refers to 1024+1024 flash map and 32Mbit-C1 1024+1024 flash map as well.SpiAutoSetWe recommend not checking SpiAutoSet, but configuring the flash manually as needed. If users select SpiAutoSet, the binaries will be downloaded according to the default flash map. The flash map of 16 Mbit and 32 Mbit will be 512 KByte + 512 KByte.DoNotChgBin•If users select DoNotChgBin, the flash working frequency, mode, and flash map will be based on the configuration when compiling. •If users do not select DoNotChgBin, the flash working frequency, mode, and flash map will be defined by the final configuration of the compiler.Download PanelSTARTClick START to start download. When the download completes, FINISH will appear in the green area on the left.STOPClick STOP to stop download.MAC AddressIf download is successful, the system will show the MAC addresses of ESP8266 STA and ESP8266 AP.COM PORTSelect the actual COM port of ESP8266.Espressif!/!22 332017.11
!6. Downloading the Firmware5. After downloading, turn GPIO0 Control on ESP-LAUNCHER to the outer side and power the board on to enable the working mode. 6.2. Check Log File After downloading firmware, users can check the log printed in the terminal by using the serial port debug tool. Users need to configure the settings of the serial port debug tool, as follows: 6.2.1. ESP8266 IOT Demo If users download ESP8266 IOT Demo firmware, the system in working mode will show the initialization information including the SDK version, etc. “Finish” means the firmware works properly. SDK󰐇version:X.X.X(e67da894)IOT󰐇VERSION󰐇=󰐇v1.0.5t45772(a)reset󰐇reason:󰐇0PWM󰐇version:󰐇00000003mode:󰐇sta(18:fe:34:a4:8c:a3)󰐇+󰐇softAP(1a:fe:34:a4:8c:a3)BAUDRATESelect the baud rate of downloading. The default value is 115200.ItemsDescriptionSPI FLASH CONFIGTable 6-2. Serial Port Debug Tool ConfigurationItemsConfiguration DescriptionProtocolSerial port.Port numberSet the port number according to the connected device.Baud rateThe baud rate at which the device is running, related to the crystal oscillator. •69120 (24 M crystal oscillator) •74880 (26 M crystal oscillator) •115200 (40 M crystal oscillator) The ESP8266 AT example supports the baud rate of 115200 by default. Users cannot modify it. The ESP8266 IOT Demo example supports the baud rate of 74880. Users can modify it.Data bit8CalibrationNone.Flow controlNone.Espressif!/!23 332017.11
!6. Downloading the Firmwareadd󰐇if0add󰐇if1dhcp󰐇server󰐇start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1)bcn󰐇100finish6.2.2. ESP8266 AT If users download the ESP8266 AT firmware, or the default firmware in ESP-LAUNCHER or ESP-WROOM-02U, the system in working mode will display “Ready” at the end. Input command “AT” in the terminal and the system will return “OK”, which means that the firmware works properly. 6.3. Configuration of RF initialization (Optional) Before downloading binaries to flash, users can modify the RF initialization settings in the RF InitConfig tab. The newly-generated esp_init_data_setting.bin can be downloaded to the flash instead of esp_init_data_default.bin. Users can configure both the options and the parameters of the RF settings. 📖 Notes: •The baud rate in AT firmware is configured as 115200 manually, however, the default baud rate of ESP8266 is 74880, due to this discrepancy, the system initialization information will be displayed as mojibake. It is a normal phenomenon as long as the system shows “Ready” at the end. •For more information on AT commands, please refer to ESP8266 AT Instruction Set.Espressif!/!24 332017.11
!6. Downloading the Firmware! Figure 6-2. ESP8266 DOWNLOAD TOOL - RF InitConfig 6.3.1. Configuration of RF InitConfig Options RF InitConfig options are listed in the upper part of Figure 6-2. Please refer to Table 6-3 for a description of this configuration. Table 6-3. Configuration of RF InitConfig OptionsItemsDescriptionTxTargetPowerConfigUsers need not configure this. It varies with the options in LowPowerMode.LowPowerModeConfigure the low power mode as required. •LowPowerEn: enable low power mode, set a power value for all data rates. •PowerLimtEn: set a limit for output power. •BackOffEn: set backoff value for each data rate. 📖 Note: Users cannot configure LowPowerEn and PowerLimtEn at the same time.CrystalFreqSelect the crystal oscillator frequency according to the crystal oscillator used. 📖 Note: If a different option is selected when downloading, it will override this configuration.Espressif!/!25 332017.11
!6. Downloading the Firmware6.3.2. Configuration of RF InitConfig Parameters RF InitConfig parameters are listed in the lower part of Figure 6-2. The description of parameters’ configuration is shown in Table 6-4. TOUT PinConf Configure the TOUT pin according to the actual TOUT pin status. We recommend the default value. •TOUT_ADC_EN: When the TOUT pin connects to an external circuit, measure the external voltage (0V - 1V) through the internal ADC. •TOUT_VDD_EN: When TOUT pin is left floating, measure VDD33 voltage through uint16 system_get_vdd33(void). ⚠ Notice: •Users cannot configure TOUT_ADC_EN and TOUT_VDD_EN at the same time. •When users use TOUT_ADC_EN, they need to input the actual voltage on VDD3P3 pin 3 and pin 4.FreqOffset•SetFreqEnable: Set the frequency offset manually. -PracticalFreqOffset: the option is valid when selecting SetFreqEnable. •AutoCalEn: Set the frequency offset automatically.RFInt modeUsers can select the RF initialization mode: •LoadRFCalParam: During the RF initialization, RF data are loaded directly from the flash without any calibration. It takes about 2 ms and the least initial current. •TxPwrCtrl in init: During the RF initialization, only Tx Power calibration will be performed, and other data are loaded from flash. It takes about 20 ms and small initial current. •FullRFCal in RFInit: All calibrations are performed during the RF initialization. It takes 200 ms and large initial current.ItemsDescriptionTable 6-4. Configuration of RF InitConfig ParametersItemsDescriptionAThe byte in esp_init_data_setting.bin (0 ~ 127 byte). For example, A = 0 represents Byte 0 in esp_init_data_setting.bin.BThe item name. Users cannot modify it if marked as Reserved.CThe item name. Users cannot modify it if marked as Reserved.DData types of configuration items, including unsigned and signed data types.EThe hexadecimal value of a configuration item.⚠ Notice: Please do not modify the parameters marked as Reserved.Espressif!/!26 332017.11
!6. Downloading the FirmwareThe following section introduces how to modify the 112 ~ 114 byte parameters. Figure 6-3 shows the initial configuration. ! Figure 6-3. 112 ～ 114 Byte Parameters Modify the RF Initialization Parameters Byte 114 is used to control THE RF initialization when ESP8266 is powered on. Table 6-5 provides the parameter configuration. Correct Frequency Offset Byte 112 and byte 113 relate to the frequency offset correction. Table 6-6 provides the parameter configuration. 📖 Note: Supported by ESP8266_NONOS_SDK_V1.5.3 and ESP8266_RTOS_SDK_V1.3.0 and higher.Table 6-5. Modify RF Initialization ParametersOptionDescriptionbyte 114 = 0Only a VDD33 calibration is performed during the RF initialization. It takes about 2 ms and the least initial current.byte 114 = 1The default value is 1. VDD33 and TX power calibrations are performed during the RF initialization. It takes about 18 ms and small initial current.byte 114 = 2The same as when “ byte 114 = 0”.byte 114 = 3All calibrations are performed during the RF initialization. It takes about 200 ms and large initial current.📖 Note: Supported by ESP8266_NONOS_SDK_V1.4.0 and ESP8266_RTOS_SDK_V1.3.0 and higher.Table 6-6. Options for Frequency Offset CorrectionOptionDescriptionThe default value of byte 112 is 0.bit 0This bit is of the highest priority. •bit 0 = 0: frequency offset cannot be corrected. •bit 0 = 1: frequency offset can be corrected.Espressif!/!27 332017.11
!6. Downloading the Firmware6.3.3. Configuration Examples The configuration of bytes 112 and 113 depends depends on users' specific needs. We provide some examples below: 1. The module works at ambient temperature, and needs no correction of the frequency offset. •Set byte 112 = 0, byte 113 = 0. 2. The module works at ambient temperature and needs no automatic tracking and correction of the frequency offset; yet the frequency offset is large. In this case, a manual correction of the frequency offset is recommended. •If the frequency offset is +160 KHz (at ambient temperature), users can set byte 112 = 0x07, byte 113 = (256 - 160/8) = 236 = 0xEC. •If the frequency offset is -160 KHz (at ambient temperature), users can set byte 112 = 0x05, byte 113 = 160/8 = 20 = 0x14. This may effect the digital peripheral performance, so we do not recommend it. 3. Applications, such as smart lights, work at a wide temperature range of -40 °C to 125 °C, and need to track and correct the frequency offset automatically. The frequency offset at ambient temperature is small, so the initial offset correction value is not needed. •Set byte 112 = 0x03, byte 113 = 0. bit 1When value = 0, it means that the bbpll is 168 M. Both positive and negative frequency offsets can be corrected. However, this may effect the digital peripheral performance and, therefore, it is not recommended. When value = 1, it means that the bbpll is 160 M. Only the positive frequency offset can be corrected.{bit 3，bit 2}When value = 0, it means that the chip will track and correct the frequency offset automatically. The initial correction value is 0. When value = 1, it means that the chip is manually programmed to change the frequency offset to that of byte 113, so the chip will not track and correct the frequency offset automatically. When value = 2, it means that the chip will track and correct the frequency offset automatically. The initial correction value is that of byte 113.The default value of byte 113 is 0.113 byteIt is the value when the frequency offset is corrected manually or the initial correction value in frequency tracking. The data type is sign int8, in multiples of 8 kHz.OptionDescriptionThe default value of byte 112 is 0.Espressif!/!28 332017.11
!6. Downloading the Firmware4. Applications, such as smart lights, work at a wide temperature range of -40 °C to 125 °C, and need to track and correct the frequency offset automatically. The frequency offset at ambient temperature is large, so the initial offset correction value is needed. •If the frequency offset is +160 kHz (at ambient temperature), users can set byte 112 = 0x0B, byte 113 = (256 - 160/8) = 236 = 0xEC. • If the frequency offset is -160 kHz (at ambient temperature), users can set byte 112 = 0x09, byte 113 = 160/8 = 20 = 0x14. But this may effect the digital peripheral performance and needs substantive tests, so we do not recommend it. We recommend Example 3. When the configuration of RF initialization is done, click GenInitBin button to generate esp_init_data_setting.bin. In addition, users can click Default button to set the value of frequency offset to default, or click LoadInitBin button to import a binary file for configuration. Espressif!/!29 332017.11
!Appendix AA. Appendix—Configuring ISSI & MXIC Flash QIO Mode When using QIO mode of ISSI flash or MXIC flash, users need to modify the first two bytes in blank.bin, as shown in Table A-1. During initialization, ESP8266 will automatically check the first two bytes and switch to QIO mode to read ISSI_FLASH or MXIC_FLASH. The structure of blank.bin is shown below: 󰐇󰐇strcut󰐇boot_hdr{󰐇󰐇󰐇󰐇char󰐇user_bin:2;󰐇󰐇󰐇󰐇󰐇//low_bit󰐇󰐇󰐇󰐇char󰐇boot_status:1;󰐇󰐇󰐇󰐇char󰐇to_qio:1;󰐇󰐇󰐇󰐇char󰐇reverse:4;󰐇󰐇󰐇󰐇char󰐇version:5;󰐇󰐇󰐇󰐇󰐇󰐇//low󰐇bit󰐇󰐇󰐇󰐇char󰐇test_pass_flag:1;󰐇󰐇󰐇󰐇char󰐇test_start_flag:1;󰐇󰐇󰐇󰐇char󰐇enhance_boot_flag:1;}⚠ Notice: Choose DIO or DOUT mode when downloading, otherwise errors may occur. There is no need to modify binaries in DIO or DOUT mode.Table A-1. blank.bin ConfigurationOptionDescriptionWithout secondary boot loaderModify to_qio to 0.With secondary boot loaderModify use_bin to 0 and to_qio to 0, as well. Modify version according to the current boot version. Example: If users use the secondary boot_v1.5.bin, please modify the first two bytes FF FF to F4 E5.Espressif!/!30 332017.11
!Appendix BB. Appendix—Learning Resources B.1. Must-Read Documents •ESP8266EX Datasheet Description: This document introduces the specifications of ESP8266EX, including an overview of the features, protocols, technical parameters and applications. It also describes the pin layout, as well as major functional modules integrated in ESP8266EX (CPU, flash and memory, clock, radio, Wi-Fi, and low-power management). Additionally, it provides descriptions of peripheral interfaces integrated on ESP8266EX, lists the electrical data of ESP8266EX and illustrates the package details of ESP8266EX. •ESP8266 Hardware Resources Description: This zip package includes the manufacturing specifications of the ESP8266 board and its modules, manufacturing BOM and schematics. •ESP8266 Non-OS SDK IoT_Demo Guide Description: This documents provides simple demo implementations of three types of smart devices: Smart Light, Smart Power Plug, and Sensor Device. It also introduces the readers to curl toolkits, functions in LAN and WAN. •ESP8266 RTOS SDK Programming Guide Description: This document provides sample codes based on ESP8266_RTOS_SDK, including basic examples, networking protocol examples and advanced examples. •ESP8266 AT Command Examples Description: This document introduces some specific examples of how to use Espressif AT commands, including single connection as a TCP client, UDP transmission and transparent transmission, and multiple connection as a TCP server. •ESP8266 AT Instruction Set Description: This document provides lists of AT commands based on ESP8266_NONOS_SDK, including user-defined AT commands, basic AT commands, Wi-Fi AT commands and TCP/IP-related AT commands. It also introduces the downloading of AT firmware into flash. •ESP8266 Non-OS SDK API Reference Description: This document lists ESP8266_NONOS_SDK APIs, provides an overview of ESP8266_NONOS_SDK and introduces the readers to system APIs, TCP/UDP APIs, mesh APIs, application specific APIs, definitions and data structures, and APIs for peripheral interfacing. •ESP8266 RTOS SDK API Reference Espressif!/!31 332017.11
!Appendix BDescription: This document lists ESP8266_RTOS_SDK APIs, including functions for Wi-Fi related APIs, boot APIs, etc. •FAQB.2. Must-Have Resources •ESP8266 SDKsDescription: This webpage provides links to the latest version of ESP8266 SDK and theolder ones.•RTOS Sample CodeDescription: This webpage provides the sample code for the commonly used functions.•Non-OS Sample CodeDescription: This webpage provides the sample code for the commonly used functions.•ESP8266 ToolsDescription: This webpage provides links to the ESP8266 flash download tools andESP8266 performance evaluation tools.•ESP8266 APK•ESP8266 Certification and Test Guide•ESP8266 BBS•ESP8266 Resources!Espressif!/!32 332017.11FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. FCC & ISED Label InstructionsThe outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as: “Contains Transmitter ModuleFCC ID:2AC7Z-ESPWROOM02U,IC:21098-ESPWROOM02U" or “Contains FCC ID:2AC7Z-ESPWROOM02U,IC:21098-ESPWROOM02U” Any similar wording that expresses the same meaning may be used.
Disclaimer and Copyright Notice Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. All liability, including liability for infringement of any proprietary rights, relating to use of information in this document is disclaimed. No licenses express or implied, by estoppel or otherwise, to any intellectual property rights are granted herein. The Wi-Fi Alliance Member logo is a trademark of the Wi-Fi Alliance. The Bluetooth logo is a registered trademark of Bluetooth SIG. All trade names, trademarks and registered trademarks mentioned in this document are property of their respective owners, and are hereby acknowledged. Copyright © 2017 Espressif Inc. All rights reserved.Espressif IOT Team"www.espressif.comISED RSS Warning: This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation et mise en œuvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuventpas coexister cette antenne ou capteurs avec d’autres.ISED RF exposure statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu