ESTAR DISPLAY TECH BC100 3D Glasses Transmit User Manual Manual

ESTAR DISPLAY TECH CO., LTD. 3D Glasses Transmit Manual

Manual

BC100ProductFeaturesandSpecificationVer.2.0Copyright © 2011, Bit Cauldron Corp. All rights reserved.Page1of5BC100Transmitter:ProductFeaturesandSpecificationVersion2.01.Introduction–BC100TransmitterBC100TransmitterispartofESG6000systemconsistsofcombinationofBC1003DEmitter,BC10IRsensor(Usedonlyif3DTVdoesnotprovide3DGlassesEmitter/3DSYNCOutPort),andESG6000LCDshutterglasses.TheBC1003DEmitter(transmitter)connectsa3D‐ReadyTVtotheESG6000LCDShutterGlassesfortheultimatein3Dstereoscopicviewing.BC10IRsensorallowsESG6000systemtobecompatiblewithmultiple3Ddisplays.BC10willpickuptheIRsyncsignalfromthe3DTVsandprovidesthissignaltotheBC1003DEmitter.BC100Transmitter:ItemID=101245‐00ComponentIDDescriptionQTY101101‐00 Glasses‐RFstdactive3DshutterglassesRF 0101102‐00 Transmitter,RFstdforactive3Dglasses 1101103‐00 Sensor,IRstdforRFactive3Dglasses 0101104‐00 Cable,3ftmicroUSBcablefor3Dglassesorfortransmitterpower 1101105‐00 Cable,3ftVesatoTRRScablefor3Dglasses 1
BC100ProductFeaturesandSpecificationVer.2.0Copyright © 2011, Bit Cauldron Corp. All rights reserved.Page2of52.Features 3DsynchronizationusingRadioFrequencyTechnology Compatiblewith3DReadyTVsequippedwitha3DEmitterPort IRsynclearningcapabilityforusewithIR3Dsyncbasedframesequential3DReadyTVs LEDindicatorsassistwithIRSensorplacement ManagementSoftwareenablesUpgradefunctionalityforcompatibilitywithfuture3DTVs Manualperformanceadjustmentcapability  IRsignalstrengthindicatormode. ManualperformancetuningofGlassesmode.o Brightness(Ghosting)adjustmento TVsynctimingadjustmento Left/Rightpolar PairingofBC100withESG6000Glassesformulti‐emitterenvironment. IRSignalSearchandLearningmode. RestoreFactoryDefaultsmode. Rechargeablelithiumpolymerbatteryo SimplemicroUSBportchargingo 60hoursofcontinuoususepercharge* Lightweightcomfortabledesign,70grams PowerOn/OffwithLEDconfirmationo OnwithLEDbatteryfuelgaugeo AutoOFF* Battery time depends on many factors including signal quality.3.SpecificationTransmitter=EmitterEmitter(BC100) Temperaturerange32°F–104°F,(0°C–40°C) Powersupply  VESACablefromTVorDC5V(USBpoweradaptersoldseparately) Dimensions: Width:1.8”(46mm),Height:1.3”(32mm),Depth:0.7”(17mm) Weight  0.077lb(35g) MicroB‐USBcable3feet VESA–TRRScable3feet
BC100ProductFeaturesandSpecificationVer.2.0Copyright © 2011, Bit Cauldron Corp. All rights reserved.Page3of54.IndividualComponentPhotos101102‐00‐Transmitter,RFstdforactive3Dglasses101104‐00‐Cable,3ftmicroUSBcablefor3Dglassesorfortransmitterpower101105‐00‐Cable,3ftVesatoTRRScablefor3Dglasses 5.BC100PCBA SeeBC100_Schematic.pdffile.6.BC100Gerberfilesandpickandplace SeefilesinfolderBC100_PCB\Artwork. 7.BC100PCBAComponentList SeeBC100_BOM.pdffile.
BC100ProductFeaturesandSpecificationVer.2.0Copyright © 2011, Bit Cauldron Corp. All rights reserved.Page4of58.VESA/TRRScablespec
BC100ProductFeaturesandSpecificationVer.2.0Copyright © 2011, Bit Cauldron Corp. All rights reserved.Page5of5Copyright@BitCauldronCorporation(2011).All rights reserved. Licensed software products are owned by BitCauldronCorporation, and are protected by national copyright laws and international treaty provisions.BitCauldronproducts are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges reserved. The information contained in this document is provided “as is.” Bit Cauldron Corporation reserves the right to make corrections, modifications, enhancements, improvements, and other changes to this document and its products and services at any time and to discontinue any product or service without notice. Other names and copyrights are property of their respective owners. Contacting Bit Cauldron Bit Cauldron Corporation. 1411 NW 7th Road Gainesville, FL 32603 USA For product information, sales, service, and technical support: In North America, info@bitcauldron.com. Worldwide, visit www.bitcauldron.com to find contacts in your area. FCC NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Information: Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.FCC information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu