ESTAR DISPLAY TECH BC100 3D Glasses Transmit User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1598502
Application ID	GQMhQ5T0uuwtBCbJNcOKlQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	96.13kB (1201599 bits)
Date Submitted	2011-12-08 00:00:00
Date Available	2011-12-08 00:00:00
Creation Date	2011-12-05 15:34:42
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2011-12-06 00:06:46
Document Title	Microsoft Word - BC100_Product Features and Specification_1.0
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

BC100 Product Features and Specification Ver. 2.0
BC100 Transmitter: Product Features and Specification Version 2.0
1. Introduction – BC100 Transmitter
BC100 Transmitter is part of ESG6000 system consists of combination of BC100 3D Emitter, BC10 IR
sensor (Used only if 3D TV does not provide 3D Glasses Emitter/3D SYNC Out Port), and ESG6000 LCD
shutter glasses. The BC100 3D Emitter (transmitter) connects a 3D‐Ready TV to the ESG6000 LCD
Shutter Glasses for the ultimate in 3D stereoscopic viewing. BC10 IR sensor allows ESG6000 system to
be compatible with multiple 3D displays. BC10 will pick up the IR sync signal from the 3D TVs and
provides this signal to the BC100 3D Emitter.
BC100 Transmitter: Item ID = 101245‐00
Component ID Description
101101‐00
Glasses‐ RF std active 3D shutter glasses RF
101102‐00
101103‐00
101104‐00
101105‐00
Transmitter, RF std for active 3D glasses
Sensor, IR std for RF active 3D glasses
Cable, 3 ft micro USB cable for 3D glasses or for transmitter power
Cable, 3 ft Vesa to TRRS cable for 3D glasses
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
QTY
Page 1 of 5
BC100 Product Features and Specification Ver. 2.0
2. Features














3D synchronization using Radio Frequency Technology
Compatible with 3D Ready TVs equipped with a 3D Emitter Port
IR sync learning capability for use with IR 3D sync based frame sequential 3D Ready TVs
LED indicators assist with IR Sensor placement
Management Software enables Upgrade functionality for compatibility with future 3D TVs
Manual performance adjustment capability
IR signal strength indicator mode.
Manual performance tuning of Glasses mode.
o Brightness (Ghosting) adjustment
o TV sync timing adjustment
o Left/Right polar
Pairing of BC100 with ESG6000 Glasses for multi‐emitter environment.
IR Signal Search and Learning mode.
Restore Factory Defaults mode.
Rechargeable lithium polymer battery
o Simple micro USB port charging
o 60 hours of continuous use per charge*
Light weight comfortable design, 70 grams
Power On/Off with LED confirmation
o On with LED battery fuel gauge
o Auto OFF
* Battery time depends on many factors including signal quality.
3. Specification
Transmitter = Emitter
Emitter (BC100)






Temperature range
Power supply
Dimensions:
Weight
Micro B ‐ USB cable
VESA – TRRS cable
32 °F – 104 °F, (0 °C – 40 °C)
VESA Cable from TV or DC 5 V (USB power adapter sold separately)
Width: 1.8” (46mm), Height: 1.3” (32mm), Depth: 0.7” (17mm)
0.077 lb (35 g)
3 feet
3 feet
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 2 of 5
BC100 Product Features and Specification Ver. 2.0
4. Individual Component Photos
101102‐00 ‐ Transmitter, RF std for active 3D glasses
101104‐00 ‐ Cable, 3 ft micro USB cable for 3D glasses or for transmitter power
101105‐00 ‐ Cable, 3 ft Vesa to TRRS cable for 3D glasses
5. BC100 PCBA
See BC100_Schematic.pdf file.
6. BC100 Gerber files and pick and place
See files in folder BC100_PCB\Artwork.
7. BC100 PCBA Component List
See BC100_BOM.pdf file.
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 3 of 5
BC100 Product Features and Specification Ver. 2.0
8. VESA/TRRS cable spec
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 4 of 5
BC100 Product Features and Specification Ver. 2.0
Copyright @ Bit Cauldron Corporation (2011). All rights reserved. Licensed software products are owned
by Bit Cauldron Corporation, and are protected by national copyright laws and international treaty
provisions.
Bit Cauldron products are covered by U.S. and foreign patents, issued and pending. Information in this
publication supersedes that in all previously published material. Specifications and price change
privileges reserved.
The information contained in this document is provided “as is.” Bit Cauldron Corporation reserves the
right to make corrections, modifications, enhancements, improvements, and other changes to this
document and its products and services at any time and to discontinue any product or service without
notice. Other names and copyrights are property of their respective owners.
Contacting Bit Cauldron
Bit Cauldron Corporation.
1411 NW 7th Road
Gainesville, FL 32603
USA
For product information, sales, service, and technical support:
In North America, info@bitcauldron.com.
Worldwide, visit www.bitcauldron.com to find contacts in your area.
FCC
to the user
FCC information
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
This device complies with Part 15 of the FCC Rules.
interference received, including interference that may cause undesired operation.
Operation is subject to the following two conditions:
Note: This equipment has been tested and found to comply with the limits for a Class B digital
1. This device
may
andlimits are designed to provide reasonable
device,
pursuant
to not
partcause
15 of harmful
the FCCinterference,
Rules. These
protection against harmful interference in a residential installation. This equipment generates, uses
2. This
accept
any interference
and
candevice
radiatemust
radio
frequency
energy and,received,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
including interference that may cause undesired operation.
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
FCC Information:
following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
Caution: Any changes or modifications not expressly approved by the party responsible for compliance
connected.
could void the user's authority to operate this equipment.
--Consult the dealer or an experienced radio/TV technician for help.
Caution: changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2011:12:05 15:34:42+08:00
Modify Date                     : 2011:12:06 00:06:46+01:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:12:06 00:06:46+01:00
Format                          : application/pdf
Title                           : Microsoft Word - BC100_Product Features and Specification_1.0
Creator                         : Administrator
Document ID                     : uuid:d6e0af78-05eb-402b-9b33-737a1b1546c5
Instance ID                     : uuid:d1e0b353-ab94-4309-8dab-ebd5abe50370
Page Count                      : 5

EXIF Metadata provided by EXIF.tools