ESTAR DISPLAY TECH BC6000 3D Glasses User Manual Manual

ESTAR DISPLAY TECH CO., LTD. 3D Glasses Manual

UserManual.wiki >

ESTAR DISPLAY TECH >

BC6000 User Manual HTML Version

Manual

BC6000ProductFeaturesandSpecificationVer.2.0





BC6000Eyewear:ProductFeaturesandSpecificationVersion2.0

1.Introduction–BC6000Eyewear

BC6000EyewearispartofBC6110systemconsistsofcombinationofBC1003DEmitter,BC10IRsensor

(Usedonlyif3DTVdoesnotprovide3DGlassesEmitter/3DSYNCOutPort),andBC6000LCDshutter

glasses.TheBC1003DEmitter(transmitter)connectsa3D‐ReadyTVtotheBC6000LCDShutterGlasses

fortheultimatein3Dstereoscopicviewing.BC10IRsensorallowsBC6110systemtobecompatible

withmultiple3Ddisplays.BC10willpickuptheIRsyncsignalfromthe3DTVsandprovidesthissignal

totheBC1003DEmitter.



BC6000Glasses:ItemID=101150‐01

ComponentIDDescriptionQTY

101101‐00 Glasses‐RFstdactive3DshutterglassesRF 1

101102‐00 Transmitter,RFstdforactive3Dglasses 0

101103‐00 Sensor,IRstdforRFactive3Dglasses 0

101104‐00 Cable,3ftmicroUSBcablefor3Dglassesorfortransmitterpower 1

101105‐00 Cable,3ftVesatoTRRScablefor3Dglasses 0

101101‐99Whiteboxfor3DKits(ForGlasses,Transmitters,cables)1

101106‐00QuickStartGuide1



BC6000ProductFeaturesandSpecificationVer.1.6



2.Features

 3DsynchronizationusingRadioFrequencyTechnology

 Compatiblewith3DReadyTVsequippedwitha3DEmitterPort

 IRsynclearningcapabilityforusewithIR3Dsyncbasedframesequential3DReadyTVs

 LEDindicatorsassistwithIRSensorplacement

 ManagementSoftwareenablesUpgradefunctionalityforcompatibilitywithfuture3DTVs

 Manualperformanceadjustmentcapability

 IRsignalstrengthindicatormode.

 ManualperformancetuningofGlassesmode.

o Brightness(Ghosting)adjustment

o TVsynctimingadjustment

o Left/Rightpolar

 PairingofBC100withBC6000Glassesformulti‐emitterenvironment.

 IRSignalSearchandLearningmode.

 RestoreFactoryDefaultsmode.

 Rechargeablelithiumpolymerbattery

o SimplemicroUSBportcharging

o 60hoursofcontinuoususepercharge*

 Lightweightcomfortabledesign,70grams

 PowerOn/OffwithLEDconfirmation

o OnwithLEDbatteryfuelgauge

o AutoOFF



* Battery time depends on many factors including signal quality.

3.Specification

3DGlasses(BC6000Eyewear)

 Lenstype:  LiquidCrystalShuttertype

 Framerate: Multi‐frequency50/100,60/120,84Hzoperation,240Hzdisplayready

 Batteries  Rechargeable,60hoursofcontinuoususe,3.5hourstofullcharge

 RFtransmissionrange150ft(45.7Meters)

 Temperaturerange32°F–104°F,(0°C–40°C)

 Powersupply  DC5V(USBpoweradaptersoldseparately)

 Dimensions: Width:2.1”(53mm),Height:6.3”(160mm),Depth:1.7”(44mm)

 Weight  0.15lb(70g)

 MicroB‐USBcable3feet

BC6000ProductFeaturesandSpecificationVer.1.6



4.IndividualComponentPhotos



101101‐00‐Glasses‐RFstdactive3DshutterglassesRF



101104‐00‐Cable,3ftmicroUSBcablefor3Dglassesorfortransmitterpower



101101‐98‐Smallwhiteboxfor3DshutterforglassesandUSBcableonly



BC6000ProductFeaturesandSpecificationVer.1.6



5.BC6000PCBA

SeeBC6000_Schematic.pdffile.

6.BC6000Gerberfilesandpickandplace

SeefilesinfolderBC6000_PCB\Artwork.

7.BC6000PCBAComponentList

SeeBC100_BOM.pdffile.

8.BC6000Signalconnections



7.BC6000PCBAComponentList

SeefilesinBC6000\Frames.ThelocationsofpowerbuttonandLEDmustmatchtheframe.



BC6000ProductFeaturesandSpecificationVer.1.6



by BitCauldronCorporation, and are protected by national copyright laws and international treaty

provisions.



BitCauldronproducts are covered by U.S. and foreign patents, issued and pending. Information in this

publication supersedes that in all previously published material. Specifications and price change

privileges reserved.

The information contained in this document is provided “as is.” Bit Cauldron Corporation reserves the

right to make corrections, modifications, enhancements, improvements, and other changes to this

document and its products and services at any time and to discontinue any product or service without

notice. Other names and copyrights are property of their respective owners.

FCC NOTE:

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interference that may cause undesired operation.

FCC Information:

Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

Contacting Bit Cauldron

Bit Cauldron Corporation.

1411 NW 7th Road

Gainesville, FL 32603

USA

For product information, sales, service, and technical support:

In North America, info@bitcauldron.com.

Worldwide, visit www.bitcauldron.com to find contacts in your area.



FCC information to the user

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

--Consult the dealer or an experienced radio/TV technician for help.

Caution: changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

ESTAR DISPLAY TECH BC6000 3D Glasses User Manual Manual

ESTAR DISPLAY TECH CO., LTD. 3D Glasses Manual

Manual

Navigation menu

Namespaces

Views

Navigation