ESTAR DISPLAY TECH BC6000 3D Glasses User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1600767
Application ID	inChoBT1Yt3BD30meAjBGw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.28kB (628450 bits)
Date Submitted	2011-12-12 00:00:00
Date Available	2011-12-12 00:00:00
Creation Date	2011-12-05 16:00:39
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2011-12-06 00:08:08
Document Title	Microsoft Word - BC6000_Product Features and Specification_2.0
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

BC6000 Product Features and Specification Ver. 2.0
BC6000 Eyewear: Product Features and Specification Version 2.0
1. Introduction – BC6000 Eyewear
BC6000 Eyewear is part of BC6110 system consists of combination of BC100 3D Emitter, BC10 IR sensor
(Used only if 3D TV does not provide 3D Glasses Emitter/3D SYNC Out Port), and BC6000 LCD shutter
glasses. The BC100 3D Emitter (transmitter) connects a 3D‐Ready TV to the BC6000 LCD Shutter Glasses
for the ultimate in 3D stereoscopic viewing. BC10 IR sensor allows BC6110 system to be compatible
with multiple 3D displays. BC10 will pick up the IR sync signal from the 3D TVs and provides this signal
to the BC100 3D Emitter.
BC6000 Glasses : Item ID = 101150‐01
Component ID Description
101101‐00
Glasses‐ RF std active 3D shutter glasses RF
101102‐00
101103‐00
101104‐00
101105‐00
101101‐99
101106‐00
Transmitter, RF std for active 3D glasses
Sensor, IR std for RF active 3D glasses
Cable, 3 ft micro USB cable for 3D glasses or for transmitter power
Cable, 3 ft Vesa to TRRS cable for 3D glasses
White box for 3D Kits (For Glasses, Transmitters, cables)
Quick Start Guide
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
QTY
Page 1 of 5
BC6000 Product Features and Specification Ver. 1.6
2. Features














3D synchronization using Radio Frequency Technology
Compatible with 3D Ready TVs equipped with a 3D Emitter Port
IR sync learning capability for use with IR 3D sync based frame sequential 3D Ready TVs
LED indicators assist with IR Sensor placement
Management Software enables Upgrade functionality for compatibility with future 3D TVs
Manual performance adjustment capability
IR signal strength indicator mode.
Manual performance tuning of Glasses mode.
o Brightness (Ghosting) adjustment
o TV sync timing adjustment
o Left/Right polar
Pairing of BC100 with BC6000 Glasses for multi‐emitter environment.
IR Signal Search and Learning mode.
Restore Factory Defaults mode.
Rechargeable lithium polymer battery
o Simple micro USB port charging
o 60 hours of continuous use per charge*
Light weight comfortable design, 70 grams
Power On/Off with LED confirmation
o On with LED battery fuel gauge
o Auto OFF
* Battery time depends on many factors including signal quality.
3. Specification
3D Glasses (BC6000 Eyewear)









Lens type:
Frame rate:
Batteries
RF transmission range
Temperature range
Power supply
Dimensions:
Weight
Micro B ‐ USB cable
Liquid Crystal Shutter type
Multi‐frequency 50/100, 60/120, 84 Hz operation, 240 Hz display ready
Rechargeable, 60 hours of continuous use, 3.5 hours to full charge
150 ft (45.7 Meters)
32 °F – 104 °F, (0 °C – 40 °C)
DC 5 V (USB power adapter sold separately)
Width: 2.1” (53 mm), Height: 6.3” (160 mm), Depth: 1.7” (44mm)
0.15 lb (70 g)
3 feet
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 2 of 5
BC6000 Product Features and Specification Ver. 1.6
4. Individual Component Photos
101101‐00 ‐ Glasses‐ RF std active 3D shutter glasses RF
101104‐00 ‐ Cable, 3 ft micro USB cable for 3D glasses or for transmitter power
101101‐98 ‐ Small white box for 3D shutter for glasses and USB cable only
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 3 of 5
BC6000 Product Features and Specification Ver. 1.6
5. BC6000 PCBA
See BC6000_Schematic.pdf file.
6. BC6000 Gerber files and pick and place
See files in folder BC6000_PCB\Artwork.
7. BC6000 PCBA Component List
See BC100_BOM.pdf file.
8. BC6000 Signal connections
7. BC6000 PCBA Component List
See files in BC6000\Frames. The locations of power button and LED must match the frame.
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 4 of 5
BC6000 Product Features and Specification Ver. 1.6
Copyright @ Bit Cauldron Corporation (2011). All rights reserved. Licensed software products are owned
by Bit Cauldron Corporation, and are protected by national copyright laws and international treaty
provisions.
Bit Cauldron products are covered by U.S. and foreign patents, issued and pending. Information in this
publication supersedes that in all previously published material. Specifications and price change
privileges reserved.
The information contained in this document is provided “as is.” Bit Cauldron Corporation reserves the
right to make corrections, modifications, enhancements, improvements, and other changes to this
document and its products and services at any time and to discontinue any product or service without
notice. Other names and copyrights are property of their respective owners.
FCC NOTE:
information to the user
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
This
device complies
Part 15interference
of the FCC Rules.
interference
received,with
including
that may cause undesired operation.
Operation is subject to the following two conditions:
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device,
pursuant
part
15 ofharmful
the FCC
Rules. These
1.
This device
maytonot
cause
interference,
andlimits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and
candevice
radiate
radio
frequency
energy and,
if not installed and used in accordance with the
2.
This
must
accept
any interference
received,
instructions, may cause harmful interference to radio communications. However, there is no
including
that may
undesired
operation.
guaranteeinterference
that interference
willcause
not occur
in a particular
installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following
measures:
FCC
Information:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
connected.
could
void
to operate radio/TV
this equipment.
--Consult the
the user's
dealerauthority
or an experienced
technician for help.
Caution: changes or modifications not expressly approved by the party responsible for compliance
could void the Bit
user's
authority to operate the equipment.
Contacting
Cauldron
Bit Cauldron Corporation.
1411 NW 7th Road
Gainesville, FL 32603
USA
For product information, sales, service, and technical support:
In North America, info@bitcauldron.com.
Worldwide, visit www.bitcauldron.com to find contacts in your area.
Copyright © 2011, Bit Cauldron Corp. All rights reserved.
Page 5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2011:12:05 16:00:39+08:00
Modify Date                     : 2011:12:06 00:08:08+01:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:12:06 00:08:08+01:00
Format                          : application/pdf
Title                           : Microsoft Word - BC6000_Product Features and Specification_2.0
Creator                         : Administrator
Document ID                     : uuid:e1631d5d-d659-4507-83c3-7056f238282d
Instance ID                     : uuid:31dd23df-da7c-46ab-847e-326c37089439
Page Count                      : 5

EXIF Metadata provided by EXIF.tools