EXPORTPRO TECHNOLOGY MT-101 Digital Proportional System User Manual MT 101 Manual for E24 thunderv
SHENZHEN EXPORTPRO TECHNOLOGY CO., LTD Digital Proportional System MT 101 Manual for E24 thunderv
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4021360 |
| Application ID | g1GJpaj+cGr9aOzzA/gH/g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 142.88kB (1786009 bits) |
| Date Submitted | 2018-09-27 00:00:00 |
| Date Available | 2018-09-27 00:00:00 |
| Creation Date | 2018-09-11 10:06:29 |
| Producing Software | Adobe PDF library 11.00 |
| Document Lastmod | 2018-09-25 10:09:45 |
| Document Title | MT-101 Manual for E24_thunderv |
| Document Creator | Adobe Illustrator CC 2014 (Macintosh) |
System Specifications RECIEVER Model: MT-101RE Frequency: 2.4GHz FHSS Operating Voltage: 4.8~6.0V (Alkaline/NiCd/Ni-MH) TRANSMITTER Model: MT-101T RF Output Power: <100mW Operating Voltage: 4.8/6V Power Supply: 4 Cell Alkaline/Ni-Cd/Ni-MH Frequency/Modulation Type: 2.4GHz FHSS Steering Wheel Power Switch 3.7~4.2V (Li-Poly 1s) Antenna(Built-in) Central Trim Knob Steering Reverse Switch Working Station Indicator Power Switch Throttle Trigger Steering Wheel Steering Range Knob Grip RECEIVER Antenna Wire LED Indicator Battery connector Motor connector Servo connector Battery Case Transmitter Battery Installation WARNING: Incorrect battery alignment or mixing battery types and/or charge levels can damage the remote. Open the battery holding tray to expose the empty battery slots. Insert 4AA batteries into the marked spaces. Note the correct direction of the batteries. Vehicle Battery Installation and Charging Battery cover Battery Switch 1: Switch off, open battery cover/tray. 2: Connect the battery connector. 3: Close the battery cover/tray. 1: Connect the battery to charger. 2: Connect the charger to power outlet. 01 CHARGER LED INDICATOR: Red: charging Green: charging complete or battery disconnected Do not leave charged battery plugged in to the charger MT-101T & MT-101RE Bind Procedure Step 1: Power off both transmitter and receiver. Step 2: Turn on receiver. The LED indicator on the receiver will flash. MT-101T MT-101RE MT-101RE MT-101RE Step 3: Turn on the transmitter. The transmitter and receiver will now bind automitically within 2 seconds. MT-101T MT-101RE The receiver LED will stay lit indicating binding is complete. Steering Trim If the wheels point to the left or the car wonders left while at neutral position adjust to the left. If your car tracks straight and wheels appear straight, do not adjust. If the wheels point to the right or the car wonders right while at neutral position adjust to the right. Steering Dual-Rate (D/R) For more steering adjust to the left For less steering adjust to the right Steering Reverse Use this adjustment for when the steering is reversed. MT-101T LED Display LED ON: Connected LED Rapid Flash: Make sure the steering wheel or throttle trigger is not in the working mode Working Station Indicator LED Slow Flash: Low-voltage warning LED OFF: Power off MT-101RE LED Display Working Station Indicator LED ON: Power on LED Rapid Flash: The singal is interrupted LED Slow Flash: Low-voltage warning LED OFF: Power off This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2018:09:25 10:09:45+08:00 Create Date : 2018:09:11 10:06:29-07:00 Metadata Date : 2018:09:25 10:09:45+08:00 Creator Tool : Adobe Illustrator CC 2014 (Macintosh) Thumbnail Width : 184 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 15760 bytes, use -b option to extract) Format : application/pdf Title : MT-101 Manual for E24_thunderv Document ID : xmp.did:654be402-a1c4-4989-891b-6387c3abaca2 Instance ID : uuid:497eebe1-dc94-4ab0-967a-3daab915a9e8 Rendition Class : proof:pdf Original Document ID : uuid:52cc8a56-d035-4a7d-88e2-3df58c5dfdb3 Derived From Instance ID : uuid:5f2eebff-5adb-43af-b002-3fe551fa0e2a Derived From Document ID : uuid:52cc8a56-d035-4a7d-88e2-3df58c5dfdb3 Derived From Original Document ID: uuid:52cc8a56-d035-4a7d-88e2-3df58c5dfdb3 Derived From Rendition Class : proof:pdf History Action : saved History Instance ID : xmp.iid:654be402-a1c4-4989-891b-6387c3abaca2 History When : 2018:09:11 10:06:17-07:00 History Software Agent : Adobe Illustrator CC 2014 (Macintosh) History Changed : / Producer : Adobe PDF library 11.00 N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 210.001652 Max Page Size H : 297.000132 Max Page Size Unit : Millimeters Font Name : Arial-BoldItalicMT, Arial-BoldMT, ArialMT, Arial-Black, AdobeSongStd-Light Font Family : Arial, Arial, Arial, Arial, Adobe 宋体 Std Font Face : Bold Italic, Bold, Regular, Black, L Font Type : Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 2.90, Version 3.00, Version 3.00, Version 2.40, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False Font File Name : ARIALBI.TTF, ARIALBD.TTF, ARIAL.TTF, ariblk.TTF, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 2 Creator : Adobe Illustrator(R) 15.0 For : Administrator, Bounding Box : 0 0 596 842 Creator Version : 15 Container Version : 11 AI Creator Version : 15.0.0 AI Build Number : 399 AI Color Usage : Color AI Ruler Units : Millimeters AI Color Model : CMYK AI Target Resolution : 800 AI Num Layers : 1 Image Height : 842 Image Width : 596 Image Size : 596x842 Megapixels : 0.502EXIF Metadata provided by EXIF.tools