Eastech WMS-1000K 2.4GHz Wireless Mouse User Manual Manual

Shenzhen Eastech Co., Ltd. 2.4GHz Wireless Mouse Manual

Manual

-1-2.4GHz wireless keyboard & Mouse KitS-1000K（1）2.4GHz WIRELESS OPTICAL MOUSEUSER MANUALCOMPLIANCE WITH FCC REGULATIONSThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation.PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATINGTHIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE
-2-This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.FUNCTIONS AND CONTROLSItem Description1 Left Button2 Scroll Wheel with Button (Middle Button): for Windows based PC only3 Right Button4PowerSwitch- ON: turns Mouse on.- OFF: turns Mouse off (recommended when not in use).5 Optical Sensor System: red light will be emitted when power is turned on6 Battery Compartment: hidden underneath cover and holds 2 x AAA batteries (not included)7 USB Receiver Storage Compartment: hidden underneath Battery Compartment Cover.Always store the USB Receiver in this compartment when not in use.8 USB ReceiverGETTING STARTED
-3-Installing/Replacing BatteriesThis Wireless Optical Mouse operates on two ‘AAA' (UM-4) sizebatteries (not included).1. Slide Power Switch to “OFF”.2. Remove the battery compartment cover located at the bottomcabinet.3. Remove all old batteries at the same time (if any).4. Following the polarity diagram shown inside the batterycompartment, insert two fresh ‘AAA' (UM-4) size alkalinebatteries or Ni-MH rechargeable batteries (not included).5. Replace the battery compartment cover making sure it issecurely closed.6. Slide Power Switch to “ON” to use.IMPORTANT:Be sure that the batteries are installed correctly. Wrong polarity maydamage the unit.7. When the mouse response or cursor movement slows down noticeably, the batteries arebecoming weak and need to be replaced. Please remove all the old batteries andreplace with fresh good quality alkaline or NiMH batteries as soon as possible.WARNINGS!Batteries must be installed or replaced by an adult.The use of good quality alkaline batteries is recommended.Place batteries based on the polarity shown on the battery compartment.Only use the recommended type of batteries.Non rechargeable batteries are not to be rechargedRechargeable batteries are only to be charged under adult supervisionRechargeable batteries are to be removed before being charged.DO NOT mix different types of batteries together.DO NOT mix new and old batteries together.If you do not use the product for an extended period of time, we recommend that you takeout the batteries. Remove exhausted batteries from the product. Battery leak maycause damage.DO NOT short circuit the terminals of the battery.DO NOT throw batteries into an open flame. They may explode.Keep the packaging for future reference as it contains important informationInstalling of the USB Receiver (Compatible with OS: Windows 2000/XP/Vista/7 and Mac OS X10.5 – 10.6)1. Remove the Battery Compartment Cover and carefully slide out the USBReceiver from its designated compartment adjacent to the batterycompartment.2. Insert the USB Receiver of the Optical Mouse directly into a USB port (USB 1.1-3.0) of yourcomputer running on either Windows or Mac OS.3. Your USB Receiver will be automatically installed by the plug and play function of the Windows orMac OS.Note: There is no need to remove the USB Receiver from the USB port of your computer even afterturning off unless you need to free up the USB port for other device.OPERATING INSTRUCTIONSLeft ButtonUse this button to select an item from a pop up or pull down menu or to click a function button.Right ButtonUse this button to access the quick menu of a related function.
-4-Scroll Wheel with Button (Middle Button) – Middle Button for Windows Only1. Under normal operation, rotate the Scroll Wheel for fast browsing up/down in an internet browser andin other document files.2. For Windows users only: To enable smooth auto scrolling, press the Scroll Wheel Button. A doublearrow icon, showing the anchor point, andafloating arrow icon, showing the current mouseposition, will appear. To scroll up/down, movethe mouse until the floating arrow icon becomesan up/down arrow. The farther away the floatingarrow is from the anchor point, the faster thescrolling speed. Press the Middle Button againto exit the auto scroll function when you havefinished.Sleep ModeWhen the mouse is left idle for 8 minutes, it will enter sleep mode for battery power saving. Press theLeft, Right or Scroll Wheel Button to wake up the Mouse and resume normal operation.Manual PairingThis product features auto ID pairing function. The USB Receiver and the wireless mouse will pairautomatically once they are activated. Should there be any problem in auto ID pairing, please follow thesteps below to complete pairing manually.For manual pairing, make sure that the Mouse is no further than 1 inch (2.54mm) away from the USBReceiver.1. Switch off the Mouse. Unplug the USB Receiver from the PC and then reinsert after 2 seconds.2. Switch on the Mouse again. Push the Right and Scroll Buttons at same time and keep 3-5 second..3. When pairing is successfully established, the mouse cursor will move again.CARE AND MAINTENANCE1. Turn off your mouse by sliding Power Switch to “OFF” when not in use to conserve battery power.2. Turn the mouse upside down to clean the Optical Sensor carefully with a lint-free cloth. Dust or dirtmay affect its performance.3. Also clean out dust or dirt accumulated inside the scroll wheel compartment to assure smooth rotationof the Scroll Wheel.4. Clean the external surface of your mouse with a damp (never wet) cloth. Mild cleaning agent speciallyformulated for cleaning mouse or keyboard may be used. However, solvent or detergent shouldnever be used.5. If the mouse is not to be used for a prolonged period, remove all batteries from its batterycompartment. Also remove the USB Receiver from your PC or Mac computer and store it inside thedesignated storage compartment adjacent to the battery compartment of the mouse to prevent loss.HINTS ON PROPER USE OF YOUR MOUSEMedical research suggests that physical discomfort and injury to nerves, tendons, and muscles may berelated to repetitive motion, an improperly set up work area, incorrect body posture, and bad work habits.To reduce the risk of discomfort and injury, follow the precautions below:Stand, stretch, and move around several times every hour.Switch hands while performing tasks. Use shortcut keys to avoid repetitive or awkward mousemovements.Relax your shoulders and keep your elbows at your sides. Adjust the position of the keyboardposition so that you don’t have to stretch to reach it.Adjust your position so that you don’t have to bend your wrists to type; avoid placing your wrists on asharp edge.If you experience continual discomfort or numbness in your hands, wrists, arms, shoulders, neck or backwhile typing, you are advised to consult a qualified medical professional.TROUBLESHOOTING GUIDESymptom Possible Problems SolutionMouse does not - Batteries may be incorrectly - Reinstall fresh AAA (UM-4) batteries
-5-turn on. installed.- Batteries may be dead.- Power Switch is not set to “ON”position.according to the polarity diagram.- Replace all exhausted batteries withfresh ones at the same time.- Set Power Switch to “ON” position.Mouse cursordoes not moveeven when theoptical sensorlight is on.- USB Receiver is not properlyinstalled on computer.- Mouse is running on a highlyreflective surface, e.g. chromeplated surface- ID of receiver is no matched withthe mouse ID- Unplug the USB Receiver from theUSB port of the PC and try anotheravailable port.- Try to use a good quality mouse pad.- take the mouse closed with theplugged receiver and turn on thepower switchMouse cursorresponse isabnormal orslow.- There may be interference fromanother RF device nearby.- There may be another 2.4GHzWireless Mouse working nearby.- Please try to move away from thepossible sources of interference.- Try to do the manual pairingprocedure to solve the possible IDcrash/loss problem.SPECIFICATIONS AND SPECTRA GREEN NOTICETransmitter (in Mouse unit) SpecificationsSensor System Optical LEDResolution 800dpiWireless Frequency 2.408 – 2.474GHzModulation GFSK with 2-way “Frequency Agility Protocol” codingWorking Distance About 30 feet / 9mPower Source 2 x DC1.5V ‘AAA’ (UM-4) alkaline batteries (Not included)Current Consumption About 11mAAverage Battery Life 3 – 4 months using good quality alkaline batteriesReceiver SpecificationsInterface USB port (type A socket)Compatibility USB 1.1 – 3.0Power Source DC5V 10%Current Consumption 30mA (max.)Working Environment LimitsTemperature Range 32° - 104°F / 0° – 40°CHumidity Range 85% Relative Humidity or less(2)wireless keyboard is used the same receiver with the mouse.1. Remove the battery compartment cover located at the bottom cabinet.2. Remove all old batteries at the same time (if any).
-6-3. Following the polarity diagram shown inside the battery compartment, insert two fresh‘AAA' (UM-4) size alkaline batteries or Ni-MH rechargeable batteries (not included).4. Replace the battery compartment cover making sure it is securely closed.5. then, the keyboard could be work.6. If the keyboard is not to be used for a prolonged period, and the indicator LED light, it means thebattery is in lower power. Then, remove all batteries from its battery compartment and replace it withfresh battery..SpecificationsTransmitter (in Mouse unit) SpecificationsSensor System Optical LEDResolution 800dpiWireless Frequency 2.408 – 2.474GHzModulation GFSK with 2-way “Frequency Agility Protocol” codingWorking Distance About 30 feet / 9mPower Source 2 x DC1.5V ‘AAA’ (UM-4) alkaline batteries (Not included)Current Consumption About 5mAAverage Battery Life 6 – 7 months using good quality alkaline batteriesReceiver SpecificationsInterface USB port (type A socket)Compatibility USB 1.1 – 3.0Power Source DC5V 10%Current Consumption 30mA (max.)Working Environment LimitsTemperature Range 32° - 104°F / 0° – 40°CHumidity Range 85% Relative Humidity or lessSPECS CONFIRMATION:Battery life may vary depending on usage.Specifications may change without notice due to continuous product enhancement.At Spectra, environmental and social responsibility is acore value of our business. We are dedicated tocontinuous implementation of responsible initiativeswith an aim to conserve and maintain the environmentthrough responsible recycling.Please visit us at http://www.spectraintl.com/green.htmfor more information on Spectra’s green initiatives or tofind a recycler in your area.90 DAY LIMITED WARRANTY AND SERVICEVALID IN THE U.S.A ONLYSPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free fromdefective materials or factory workmanship for a period of 90 days from the date of originalcustomer purchase and provided the product is utilized within the U.S.A. This warranty is notassignable or transferable. Our obligation under this warranty is the repair or replacement ofthe defective unit or any part thereof, except batteries, when it is returned to the SPECTRA
-7-Service Department, accompanied by proof of the date of original consumer purchase, suchas a duplicated copy of a sales receipt. You must pay all shipping charges required to ship theproduct to SPECTRA for warranty service. If the product is repaired or replaced under warranty,the return charges will be at SPECTRA’s expense. There are no other express warrantiesother than those stated herein.This warranty is valid only in accordance with the conditions set forth below:1. The warranty applies to the SPECTRA product only while:a. It remains in the possession of the original purchaser and proof of purchase isdemonstrated.b. It has not been subjected to accident, misuse, abuse, improper service, usage outsidethe descriptions and warnings covered within the owner’s manual or non-SPECTRAapproved modifications.c. Claims are made within the warranty period.2. This warranty does not cover damage or equipment failure caused by electrical wiring not incompliance with electrical codes or SPECTRA owner’s manual specifications, or failure toprovide reasonable care and necessary maintenance as outlined in the owner’s manual.3. Warranty of all SPECTRA products applies to residential use only and is void when productsare used in a nonresidential environment or installed outside the United States.This warranty gives you specific legal rights, and you may also have other rights which varyfrom state to state. TO OBTAIN SERVICE, please remove all batteries (if any) and pack theunit carefully and send it prepaid by insured parcel post or UPS to SPECTRA at the addressshown below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above,please include a proof of purchase (dated cash register receipt) so that we may establish youreligibility for warranty service and repair of the unit without cost. Also include a note with adescription explaining how the unit is defective. A customer service representative may needto contact you regarding the status of your repair, so include your name, address, phonenumber and e-mail address to speed the process.SPECTRA MERCHANDISING INTERNATIONAL, INC.4230 North Normandy Avenue,Chicago, IL 60634, USA.1-800-777-5331To register your product, visit the link below on the website to enter your information.http://www.spectraintl.com/wform.htmPrinted in China

Navigation menu