Ecolink Intelligent Technology BHASL001 Ring Smoke / CO Listener User Manual Ring Video Doorbell Setup and Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	3955058
Application ID	Np5pOq/9JB9Fzt7K4C6NcQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.13kB (626655 bits)
Date Submitted	2018-08-07 00:00:00
Date Available	2018-08-07 00:00:00
Creation Date	2018-05-15 13:42:02
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-05-15 13:42:11
Document Title	Ring Video Doorbell Setup and Installation Guide
Document Creator	Adobe InDesign CC 13.0 (Macintosh)
Document Author:	Ring.com

74mm
Smoke/CO Listener
100mm
For Ring Alarm
Add peace of mind to
your Ring Alarm.
Contents
Ring Smoke/CO Listener is a smart sound
sensor for your Ring Alarm system. It
works in tandem with one standard
smoke or CO alarm (or smoke/CO
combo).
1. Diagram
2. In-app Setup
When your smoke or CO alarm begins
to sound, your Alarm system notifies you
of the problem, wherever you are. If your
system is professionally monitored, our
monitoring center will also be notified.
3. Pairing the Listener
Before you install...
4. Physical Installation
Smoke and CO alarms have a finite
lifespan, after which they must be
replaced. Refer to the manufacturer’s
recommendations for details. If your
alarm has expired, it must be replaced
before you install your Ring Smoke/CO
Listener.
5. Additional Information
1.
Say hello to
your Ring
Smoke/CO
Listener.
Diagram
LED ring
Setup button
Microphone
Mounting
bracket
2.
S et up your
Ring Smoke/
CO Listener in
the Ring app.
Begin the setup process near
your Ring Alarm Base Station.
In the Ring app, tap Set Up a Device.
Choose Security Devices, then Sensors,
then Ring Smoke/CO Listener, then tap
Add Device.
To complete the setup process, follow the
in-app instructions.
3.
Pair your Ring
Smoke/CO
Listener with
your Alarm Base
Station.
When prompted, scan the QR
Code or enter the PIN.
This begins the pairing process. The QR
Code and PIN are on the back of your
Listener and in the product packaging.
Pull out the clear tab.
This turns the Listener on. Your Alarm
Base Station then finds it automatically.
As the Listener pairs to your Alarm Base
Station, its LED ring blinks slowly, then
quickly. Once it pairs, the LED glows blue
for three seconds.
If the Listener does not pair successfully,
the LED ring glows red. To try the pairing
process again, remove and reinstall the
battery inside the Listener.
4.
Install your Ring
Smoke/CO
Listener.
Line up the mounting bracket.
Find a place for the bracket within six
inches (15.25 cm.) of your smoke or CO
alarm.
Position the mounting bracket so that
the arrow marked “Smoke/CO Alarm This
Side” points directly at your smoke or CO
alarm.
Secure the mounting bracket
and mount the Listener.
Once you’ve decided on a location,
secure the bracket to your ceiling with the
included screws.
Place the Listener on the bracket posts,
then slide to lock it in place.
When mounting on drywall, pre-drill the
holes and insert the included anchors.
6” or fewer
During the setup process, the Ring app
prompts you to press the “ Test ” button on
your Smoke or CO alarm. Mount the Listener
on its bracket before testing your alarm.
Test the connection.
Press and release the Setup button
quickly. If the LED ring blinks blue, the
sensor is connected to the Base Station
and is ready to use.
If it blinks red, try connecting again. To
do this, hold the Setup button for three
seconds.
Setup button
If your Listener cannot connect, try installing
your Alarm Range Extender between your
Listener and Alarm Base Station, following
the included instructions.
5.
Additional
information.
How to replace the battery:
Twist the lid on your Listener counterclockwise and lift to remove. Replace
the battery with a fresh CR123A cell. The
Listener then reconnects to your Alarm
Base Station automatically.
Place the lid back on the Listener, taking
care to line up the semi-circle on the rim
of the lid with the “open” semi-circle on
the base. Twist the lid clockwise to lock
it in.
How to remove Ring Smoke/CO
Listener from your system:
LED status patterns:
Smoke or CO
alert sound
detected
1 Blue Blink
Sensor
tampered
3 Red Blinks
When prompted, open the Listener
and remove and reinstall the battery to
complete the removal.
Firmware
updating
Blue & Red Blinks
How to perform a factory reset:
Do not paint this device!
If your Listener stops working or will not
connect (even with a good battery), try a
factory reset.
Painting your Listener can prevent it from
functioning correctly.
To do this, press and hold the Setup
button for 10 seconds. When the LED ring
stops blinking, your Listener has reset.
Painting smoke or CO alarms can
degrade their performance as well,
and is strongly discouraged.
Open the side menu in the Ring app and
tap Devices, then Base Station. Next,
select your Listener and tap the gearshaped icon. Then tap Remove Device.
This process disconnects your Listener from
your Alarm Base Station. To begin using the
Listener again, set it up in the Ring app.
© 2018 Ring LLC or its affiliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
Last updated: 05/15/18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : zh-CN
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36
Format                          : application/pdf
Title                           : Ring Video Doorbell Setup and Installation Guide
Creator                         : Ring.com
Description                     : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com
Create Date                     : 2018:05:15 13:42:02+08:00
Metadata Date                   : 2018:05:15 13:42:11+08:00
Modify Date                     : 2018:05:15 13:42:11+08:00
Rating                          : 5
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:d5b5c20e-560d-3643-8bdc-f042b5437680
Original Document ID            : xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Document ID                     : xmp.id:2fa72ad0-49d8-409b-ab38-bafa70d39d22
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:742490d5-f483-4b8f-96d8-bbdbb711e9b8
Derived From Document ID        : xmp.did:4b0cbe51-5959-4fad-9410-5755de8219f2
Derived From Original Document ID: xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:05:15 13:42:02+08:00
Marked                          : True
Authors Position                : Setup and Installation Guide
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Author                          : Ring.com
Subject                         : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com

EXIF Metadata provided by EXIF.tools