Ecolink Intelligent Technology BHAWS001 Ring Flood/Freeze Sensor User Manual Ring Video Doorbell Setup and Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	4050318
Application ID	+KECn7IEseUWA72BB7Ptqw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	72.35kB (904393 bits)
Date Submitted	2018-10-26 00:00:00
Date Available	2018-10-26 00:00:00
Creation Date	2018-04-12 14:26:37
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-10-26 15:14:33
Document Title	Ring Video Doorbell Setup and Installation Guide
Document Creator	Adobe InDesign CC 13.0 (Macintosh)
Document Author:	Ring.com

1523 26th St.
Santa Monica, CA 90404
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B) – This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
The FCC ID of the device in this package can be found on the back or bottom
of the device.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the
same of equivalent type recommended by the manufacturer. Dispose of the
used batteries according to the manufacturer’s instructions.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Ring_Flood_Freeze_Sensor_legal.indd 1
4/12/18 2:26 PM
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Protect the device from direct sunlight. Install the device at dry locations, and
protect it against rain and humidity. The device may not get in contact to salt
water or other conductive liquids. The device must be charged only within a
building in a dry state.
This device may not be disassembled and used for any other purpose. This
unit, and all the components are configured for the sole purpose of providing
a security system. They are not approved for individual cellular use, battery use
or other mishandling.
A mobile app must be used to set up the device.
This device is not an Access point or Hotspot and should not be used as one.
To review your warranty coverage, please visit www.ring.com/warranty.
Patents: www.ring.com/patents
Ring_Flood_Freeze_Sensor_legal.indd 2
Version 1.1
4/12/18 2:26 PM
Flood/Freeze Sensor
For Ring Alarm
Prevent water and ice damage
at home.
Contents
Ring Flood/Freeze Sensor is a smart
sensor for your Ring Alarm system. Place
it anywhere that flooding or freezing
conditions can occur.
1. Diagram
When the Sensor detects water or
dangerously low temperatures (around
40 ° F or 4.4 ° C), Ring Alarm notifies you
of the problem, wherever you are.
2. In-app Setup
3. Pairing the Sensor
1.
Say hello to
your Ring
Flood/Freeze
Sensor.
Diagram
LED Ring
Setup Button
4. Physical Installation
Flood Sensors
5. Additional Information
2.
S et up your
Ring Flood/
Freeze Sensor
in the Ring app.
Begin the setup process near
your Ring Alarm Base Station.
In the Ring app, tap Set Up a Device.
Choose Security Devices, then Sensors,
then Ring Flood/Freeze Sensor, then tap
Add Device.
To complete the setup process, follow
the in-app instructions.
3.
Pair your Ring
Flood/Freeze
Sensor with
your Ring Base
Station.
When prompted, scan the QR
Code or enter the PIN.
This begins the pairing process. The QR
Code and PIN are on the back of your
sensor and in the product packaging.
Open the lid and pull out the tab.
Watch your Sensor connect.
Twist the lid to the left to unlock, then lift it
to remove. Next, pull out the clear battery
tab. This turns on the Sensor.
As your Sensor pairs to your Base Station,
its LED ring blinks slowly, then quickly.
Once the Sensor is paired, the LED glows
blue for three seconds.
Your Base Station finds it automatically.
If the Sensor does not pair successfully,
the LED ring glows red. To try the pairing
process again, remove and reinstall the
battery inside the Sensor.
Setup
Button
4.
Place your Ring
Flood/Freeze
Sensor.
Test your Flood/Freeze Sensor.
Close the lid.
Place the Sensor on the ground.
Bring your Sensor to the area you want to
monitor.
Place the lid back on the Sensor, taking
care to line up the semi-circle on the rim
of the lid with the “open” semi-circle on
the base. Twist the lid clockwise to lock
it in.
Choose a spot next to a possible source
of flooding, such as your water heater,
sink, or refrigerator. Take care to place
the Sensor in a location where it won’t be
kicked or moved unintentionally.
Push the Setup button inside the Sensor
to test the connection. If the LED ring
blinks blue, the Sensor has connected
successfully and is ready to place.
If it blinks red, try the test again. You may
find that repositioning the Sensor (even
just a few inches) can improve reception
and allow it to reconnect.
If the Sensor cannot connect, try installing a
Ring Range Extender between your Sensor
and Base Station, following the included
instructions.
5.
Additional
information.
How to remove this Sensor from
your system:
Open the side menu in the Ring app and
tap Devices, then Base Station. Next,
select your Sensor, then tap the gearshaped icon, and tap Remove Device.
How to replace the battery:
Twist the lid on the Sensor counterclockwise and lift to remove. Replace the
battery with a fresh CR123A cell.
The Sensor then reconnects to your Ring
Base Station automatically.
When prompted, open the sensor and
remove and reinstall the battery to
complete the removal.
LED status patterns:
How to perform a factory reset:
Water or low
temperature
detected
Blue Blink (1x)
Sensor
opened 		
or moved
Red Blinks (3x)
Firmware
updating
Blue & Red Blinks
If your Flood/Freeze Sensor stops
working or can’t connect (even with a
good battery), try a factory reset.
To do this, press and hold the Setup
button for 10 seconds. When the LED
ring stops blinking, the Sensor has reset.
This process disconnects the Sensor from
your Alarm Base Station. To begin using the
Sensor again, set it up in the Ring app.
© 2018 Ring LLC or its affiliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
Last updated: 09/26/18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Ring.com
Create Date                     : 2018:04:12 14:26:37-07:00
GTS PDFX Version                : PDF/X-4
Modify Date                     : 2018:10:26 15:14:33-07:00
Subject                         : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 91.163280, 2018/06/22-11:31:03
Format                          : application/pdf
Title                           : Ring Video Doorbell Setup and Installation Guide
Creator                         : Ring.com
Description                     : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com
Metadata Date                   : 2018:10:26 15:14:33-07:00
Rating                          : 5
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:942e97cf-70cc-4ca1-9957-1df74199a0cd
Original Document ID            : xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Document ID                     : xmp.id:e698def8-3fdf-4f81-974c-0515ec4c2f3a
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:0a2bb643-af9e-484d-ae72-17bd5e668c6d
Derived From Document ID        : xmp.did:31b0128f-4042-4cd1-a8f9-66c94d161e69
Derived From Original Document ID: xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:04:12 14:26:37-07:00
Marked                          : True
Authors Position                : Setup and Installation Guide
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 4

EXIF Metadata provided by EXIF.tools