Ecolink Intelligent Technology WST101 4-BUTTON WIRELESS SECURITY REMOTE KEY FOB User Manual WST101 manual

Download:
Mirror Download [FCC.gov]
Document ID	1873021
Application ID	mbxVIEizi2rPMC5+XhX3tg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.43kB (105351 bits)
Date Submitted	2013-01-02 00:00:00
Date Available	2013-06-07 00:00:00
Creation Date	2012-02-28 10:25:43
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2012-02-28 10:25:43
Document Title	Microsoft Word - WST101 manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Quinto

WST-101 Four Button Wireless Remote
Specifications
Frequency: 319.5MHz
Battery: 3V lithium CR2032
Battery life: 5 years
Operating Temperature: 32°-120°F (0°-49°C)
Operating Humidity: 5-95% RH non condensing
Compatible with all GE/Interlogix receivers
Enrolling
Each remote in learned into a control panel as an unsupervised sensor and uses one available zone slot. For all
Concord, Simon3 and Simon XT panels, use sensor group number 01, 03, 06 or 07.
Please refer to your specific control panel installation manual for full instructions.
Operation
Lock
Depending on your control panel:
Press once to arm in Stay mode.
Press twice to arm in Away mode.
Press three times to activate the latchkey
feature.
Light
For Network X panels, press this button to
arm the system in Stay mode. For Concord,
Simon 3 or XT it will turn system controlled
lights on or off.
Unlock
Press this button to disarm your system. You do
not have to enter your access code when you
use this key to disarm the system.
Star
For Network X panels, this button will perform
the same function as programed for the Star
key on keypad. For Simon 3 or XT panels with X10 universal module, pressing this button will
open/close the garage door.
Panic or Aux: If the remote is programmed using a panic or portable auxiliary group number. Pressing the Lock
and Unlock buttons simultaneously will activate an audible or silent alarm (depending on group number) and
initiate reports to the central station.
Replacing the Battery
When the battery is low a signal will be send to the control panel, or when a button is pressed the LED will
appear dim or will not turn on at all. Follow these simple steps to replace the battery
1.
2.
3.
4.
5.
With a key or small screwdriver, press the black tab located at the bottom of the remote (fig.1) and slide
the chrome trim off.
Carefully separate the front and back piece of plastic to reveal the battery
Replace with a CR2032 battery ensuring the + side of the battery faces up (fig.2)
Re-assemble the plastics and ensure they click together
Ensure the notch in the chrome trim is aligned with the back of the plastic. It will only go on one way.
(fig.3)
Figure 1
Figure 2
Figure 3
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Re-orient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment to an outlet on a different circuit from the receiver
•
Consult the dealer or an experienced radio/TV contractor for help.
Warning: Changes or modifications not expressly approved by Ecolink Intelligent Technology Inc. could void
the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
FCC ID:XQC-WST101
IC: 9863B-WST101
Warranty
Ecolink Intelligent Technology Inc . warrants that for a period of 5 years from the date of purchase that this
product is free from defects in material and workmanship. This warranty does not apply to damage caused by
shipping or handling, or damage caused by accident, abuse, misuse, misapplication, ordinary wear, improper
maintenance, failure to follow instructions or as a result of any unauthorized modifications.
If there is a defect in materials and workmanship under normal use within the warranty period Ecolink
Intelligent Technology Inc. shall, at its option, repair or replace the defective equipment upon return of
the equipment to the original point of purchase.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other
warranties, whether expressed or implied and of all other obligations or liabilities on the part of Ecolink
Intelligent Technology Inc. neither assumes responsibility for, nor authorizes any other person
purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or
liability concerning this product.
The maximum liability for Ecolink Intelligent Technology Inc. under all circumstances for any warranty issue
shall be limited to a replacement of the defective product . It is recommended that the customer check their
equipment on a regular basis for proper operation.
2055 Corte Del Nogal
Carlsbad, California 92011
1-855-632-6546
www.discoverecolink.com
© 2012 Ecolink Intelligent Technology Inc.
PN WST101 R1.00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Producer                        : GPL Ghostscript 8.64
Create Date                     : 2012:02:28 10:25:43-08:00
Modify Date                     : 2012:02:28 10:25:43-08:00
Title                           : Microsoft Word - WST101 manual
Creator                         : PScript5.dll Version 5.2.2
Author                          : Quinto

EXIF Metadata provided by EXIF.tools