Edgecore Networks ECW5410O 802.11ac Wireless Access Point User Manual Statement 802 11abgn DFS Client

Edgecore Networks Corporation 802.11ac Wireless Access Point Statement 802 11abgn DFS Client

User Manual

Download: Edgecore Networks ECW5410O 802.11ac Wireless Access Point User Manual Statement  802 11abgn   DFS Client
Mirror Download [FCC.gov]Edgecore Networks ECW5410O 802.11ac Wireless Access Point User Manual Statement  802 11abgn   DFS Client
Document ID3616089
Application IDn+6gpMuHLtS8C5WRtjzaGA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize39.75kB (496820 bits)
Date Submitted2017-10-24 00:00:00
Date Available2017-10-26 00:00:00
Creation Date2017-10-21 09:52:50
Producing SoftwareGPL Ghostscript 9.04
Document Lastmod2017-10-24 14:32:14
Document TitleStatement- 802.11abgn + DFS-Client
Document CreatorPDFCreator Version 1.2.3
Document Author: tting

DATASHEET
ECW5410-O
802.11ac OCP Wireless Access Point
Product Overview
The ECW5410-O is an Wave 2 indoor 802.11a/b/g/n/ac dual-band, dual-radio enterprise indoor AP with a
4x4 MU-MIMO antenna configuration.
Through its Gigabit Ethernet port the 802.11ac dual-band wireless AP can connect to the backbone network.
The ECW5410-O supports 802.3at PoE, which enables the AP to be powered remotely by a PoE switch. An
AC power adapter option is also included for locations where PoE is not available.
Key Features and Benefits
Wireless 802.11ac Technology
Using 802.11ac MIMO (Multiple Input Multiple)
wireless technology, the AP supports three
and three receiving antennas that extend range and
increase the throughput by up to nine times that of
existing Wi-Fi.
Wave 2, MU-MIMO
Support 4 clients at the same time. Also, it supports
beamforming and channel bonding(80MHz160MHz)
Advanced Traffic Management
Support for up to sixteen Virtual Access Point (VAP)
interfaces per radio, which allows traffic to be separated
for different user groups within the same service area.
Each radio can support up to 100 wireless clients,
shared between all VAPs, whereby the clients associate
with each VAP in the same way as they would with
physically separate APs. This means that each VAP
can be configured with its own Service Set Identification
(SSID), security settings, VLAN assignments, and other
parameters, allowing the AP to serve a diverse range of
client needs from a single unit.
Dual-Band Access Point
Easy on your budget and simple to install, the AP uses
dynamic rate shifting to automatically match the best
connection speed, keeping users connected to the
network even while roaming.
Application Diagram
For a world always connected…
ECW5410-O Product Specifications
Features
Physical Features
 One 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with
802.3at/af-compliant Power over Ethernet (PoE) support
 One 10/100/1000BASE-T Gigabit Ethernet (RJ-45)
 One console port(10/100/1000BASE-T) with an RJ-45 connector
 One USB Port (optional)
 One Reset Button
 Five LEDs: Power, WLAN 2.4G, WLAN 5G, Eth1/PoE, Eth2
 PoE 802.3at compliant
Standards
IEEE 802.11n 2.4 GHz and 5.0 GHz
IEEE 802.11ac/a 5.0 GHz
IEEE 802.11b/g, 2.4 GHz
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.11h Regulatory Domain Selection
IEEE 802.11i
Wi-Fi Multimedia (WMM)
Wireless Distribution System (WDS)
Wireless Frequency
802.11g/n:
2.4 ~ 2.4835 GHz (US, Canada)
2.4 ~ 2.4835 GHz (ETSI, Japan)
802.11b:
2.4 ~ 2.4835 GHz (US, Canada)
2.4 ~ 2.4835 GHz (ETSI)
2.4 ~ 2.497 GHz (Japan)
802.11a/n/ac:
5.15 ~ 5.25 GHz (lower band) US/Canada, Europe, Japan
5.25 ~ 5.35 GHz (middle band) US/Canada, Europe, Japan
5.725 ~ 5.825 GHz (upper band) US/Canada
5.50 ~ 5.70 GHz Europe
5.47 ~ 5.725GHz
Wireless Features
 VAP (Virtual Access Point) support with up to 16
SSIDs(2.4GHz: 8, 5GHz: 8)
 Operation modes: AP Mode, Point-to-Point WDS, Point-toMultiple points WDS, WDS With AP
 Transmit power adjustment
 Dynamic Channel Selection for noisy environment
 Auto-channel selection
 Support Multi-cast
Network Management












Telent
Web-based Management (HTTP and HTTPS)
SNMP management v1/v2c
Software download and upgrade by TFTP, HTTP
Configuration file backup and restore
System Information – AP status, station status, event logs
SNTP
Country selection
IPv4 and IPv6 dual stack support
Remote Management
UPNP
Upstream / Dwonstream Rate Limit
Antenna
Type: PCB type
Gain: 4dBi in 2.4GHz, 5dBi in 5GHz
Regulatory Compliance
FCC Part 15 Subpart B
CE
Radio Signal Certification
FCC Part 15C 15.247, 15.207 (2.4GHz)
EN 300 328
EN 301 489-1
EN 301 489-17
Mechanical
Dimensions: 190.88x194.76x38mm
Weight: 0.623kg
Power
Input: 100 or 240 VAC, 50-60 Hz
Output: 12V 2A (or Ethernet PoE 802.3af/ at compatible)
Power Consumption: 17.4 W maximum
Environmental Specification
Temperature:
Standard Operating: 0°C to 50°C
Storage: -20°C to 70°C
Humidity: 10% to 95% (non-condensing)
Warranty
Please check www.edge-core.com for the warranty terms in
your country/region.
Security





WEP 64/128-bits
Wi-Fi Protected Access (WPA/WPA2)
WPA/WPA2 (PSK) over WDS
Secure SSH (Secure Sockets Shell), Telnet
SSID broadcast enable/disable
TEL: 886-3-5638888 FAX: 886-3-6686111
1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
sales_ec@edge-core.com
www.edge-core.com
For More Information
To find out more about Edge-Core Networks products and solutions, visit
www.edge-core.com
About Edge-Core Networks
Edge-Core Networks is in the business of providing innovative network
solutions. In the service provider network, in the data center or in the cloud,
Edge-Core Networks delivers the software and systems that transform the
way the world connects. Edge-Core Networks serves customers and partners
worldwide. Additional information can be found at www.edge-core.com.
© Copyright 2012 Edge-Core Networks Corp. The information contained herein is subject to change
without notice. This document is for informational purposes only and does not set forth any warranty,
expressed or implied, concerning any equipment, equipment feature, or service offered by Edge-Core
Networks. Edge-Core Networks shall not be liable for technical or editorial errors or omissions contained
herein.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 42cm between the radiator & your body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2017:10:21 09:52:50+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2017:10:24 14:32:14+08:00
Metadata Date                   : 2017:10:24 14:32:14+08:00
Format                          : application/pdf
Description                     : 
Creator                         : tting
Title                           : Statement- 802.11abgn + DFS-Client
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:491073f5-b5ed-4cb1-9f35-a903f399981a
Instance ID                     : uuid:0244481f-3f81-4872-bee0-cfca5255e995
Page Count                      : 3
Subject                         : 
Author                          : tting
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YZKECW5410O

Navigation menu