Effinet Systems EFL1903X 19" LCD Monitor User Manual EFL1903X STD R22
Effinet Systems, Inc. 19" LCD Monitor EFL1903X STD R22
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 470046 |
| Application ID | 40Spfd3Efg5cEtaYkoQOzw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 58.81kB (735168 bits) |
| Date Submitted | 2004-09-17 00:00:00 |
| Date Available | 2004-09-17 00:00:00 |
| Creation Date | 2004-09-17 09:35:04 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2004-09-17 09:35:04 |
| Document Title | Microsoft Word - EFL1903X-STD-R22.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | B9DAB1A4BFEB |
Engineering Specification Model No. EFL-1903X 19inches High resolution LCD Monitor Customer’s logo display on Booting is available - Samsung TFT LCD Panel - High performance up-Scaling characteristic - Automatic Scanning - Wide Viewing Angle, High Speed Response - Enhanced Video Quality - Power Supply with enhanced Design Margin - Test Pattern for Burn-in & Self Check - Option z 3 Input (RGB, AV, SVHS) z DVI Input z Touch Screen(3M, … ) z Stereo Audio Amplifier Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 FCC RF INTERFERENCE STATEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio, TV technical for help. Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment. Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 Table of Contents FCC RF INTERFERENCE STATEMENT .................................. 2 1. GENERAL DESCRIPTION ........................................................... 4 1-1. Overview ........................................................................................................................................4 1-2. Quick reference table of Characteristics ........................................................................................4 2. USER CONTROL & OSD.............................................................. 7 2-1. Description of Control Key ............................................................................................................7 2-2. OSD MENU SCREEN...................................................................................................................8 2-3. OSD Control Functions..................................................................................................................9 3. CONNECTOR PIN DESCRIPTIONS .......................................... 10 3-1. 15 Pin D-SUB Connector.............................................................................................................10 3-2. Serial(RS-232C) Connector .........................................................................................................10 3-3. USB Connector ............................................................................................................................10 4. STANDARD DISPLAY MODE................................................... 11 5. MECHANICAL STRUCTURE .................................................... 12 Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 1. GENERAL DESCRIPTION 1-1. Overview Effinet open frame LCD Monitor EFL-1903X is a high performance TFT LCD monitor providing high quality image from the analog RGB input. This monitor supports wide range signal input from VGA to SXGA resolution at vertical refresh rate of 60 to 75Hz. It includes integrated signal processing unit, named LSP (LCD Signal Processor), which had all electronic function for user application. It is designed for industrial use with Auto power on, up scaling performance adequate for low-resolution application and enhanced design margin for reliability It also gives versatile optional features like, DVI input, Video input, Touch Screen, Stereo Audio amplifier, Boot up custom logo and custom designed frame. 1-2. Quick reference table of Characteristics Panel (S/S) Size 19” Diagonal Active Display Area 376.32 x 301.056 mm Type No. Samsung, LTM190E1-L01 Number of Pixels 1280 (H) x 1024 (V) Pixel Arrangement RGB Vertical Stripe Pixel Pitch 0.294 mm x 0.294 mm Color Depth 16.7M True Color Surface Treatments Hard Coating (3H), Haze 44% Viewing Angle Horizontal : (CR≥10) Vertical : θL θR ΦH ΦL 85 degrees 85 degrees 85 degrees 85 degrees Contrast Ratio Typ. 500 : 1 Response Time Rise time(tr) : 15ms(Typ.) Fall time(tf) : 10ms(Typ.) Average Brightness Typ. 250 cd/ m2 Frame Rate Typ. 60Hz, Max. 75Hz Panel Dimension (WHD) 404.2 x 330.0 x 20.0 mm CCFT 4 Lamps (2 Dual) Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 Scaning Frequency Horizontal 30 ~ 80 KHz Vertical 50 ~ 75 Hz Prime 1280 x 1024 @ 60 Hz Standard 720x400 @70 Hz 640x480 @60/67/72/75 Hz 800x600 @56/60/72/75 Hz 1024x768 @60/70/75 Hz 1280x1024 @60/75 Hz RGB (Video / Sync) RGB Analog (0.7Vp-p, 75ohms) / H/V Separate (TTL) CVBS Composite Video 1Vp-p, 75ohms Type Separate H/V sync, Composite, SOG (Sync-On-Green) Level TTL level (V high ≥ 2.0V, V low ≤ 0.8V) Polarity Positive or Negative RGB 15pin D-Sub Video RCA Jack - 1 ea. S-Video SVHS Jack - 1 ea. Resolution Input Signal Sync Input Signal Interface Compatible Color System Power NTSC M / NTSC 4.43 / PAL M / PAL N / SECAM AC Input AC 90 ~ 265V @60/50Hz max. power dissipation 35Watts Adapter Rating 12V 5A Regulation(Safety , Ergonomics, EMC) CUL (UL+CSA), CE, FCC Environmental Operating Temperature: 10 to 50ºC / Humidity: 8 to 80% Conditions Storage Temperature: -20 to 70ºC / Humidity: 5 to 90% White Color Temperature 9300°K: CIE x=0.281±0.015 / y=0.311±0.015 6500°K : CIE x=0.313±0.015 / y=0.329±0.015 Demonstrated MTBF More than 20,000 hours Touch Screen Touch Panel 3M Touch / 13-5471-01MA (Optional) Controller EXII-1060SC (Serial) or EXII-5050UC (USB) Controller Interface Serial or USB Interface Mono / Stereo Stereo Input Audio Jack 3.5mm mini jack Audio Output Nominal 1.3 Wrms at 8 ohms Audio (Optional) * No external power for audio operation is needed Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 Speaker Connector Molex 5240 : 2p(Left), 3p(Right) ; * Speaker side : Molex 5102 Aidio S/N Ratio Over than 80dB (Optional) THD Under 10% (THD : Total Harmonic Distortion) Frequency Response Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 2. USER CONTROL & OSD 2-1. Description of Control Key UP (+) MENU INPUT SELECT * 3 input option only SWITCH NAME MENU SEL (AUTO) DOWN (-) Status LED Cable Connect SWITCH FUNCTIONS Activate / Deactivate the OSD Menu Window. Move cursor to Main Menu from sub-menu. SEL Move cursor in the Sub-Menu(Brightness ↔ Mode) (AUTO) Auto Tracking (Pressing “SEL” key) UP(+) Move cursor at Main Menu(Picture / Utility) Increase the value of the selected function DOWN(-) Move cursor at Main Menu(Picture / Utility) Decrease the value of the selected function. INPUT SELECT Select the input signal( RGB → Video → S-Video → RGB…) When power off / on, the last memoried input mode will be displayed. Apply for 3 input model. Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 2-2. OSD MENU SCREEN Brightnes 100 s contrast 80 - PICTURE UTILITY sharpnes 4 h position 50 1 2 3 4 5 v position 50 - 18 frequency 105 - mode UTILITY normal english german factory pressto reset 6500 7300 9300 user UTILITY 10 800 x 600 / 60Hz information VIDEO / S-VIDEO Input fill to aspect ratio color temp language power on time PICTURE phase PICTURE Brightnes 100 s contrast 80 - color 50 - sharpnes 4 1 2 3 4 5 Video format press to select Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 2-3. OSD Control Functions CONTROL Auto Tracking FUNCTION Automatic screen adjustment process. If there is any noise on the screen or screen shift, just press “ SEL” button. Since this monitor is equipped with “Auto Tracking” function, it will automatically configure the monitor setting. Brightness Adjust the brightness level of the Display Contrast Adjust the contrast level of the Display. Sharpness Adjuust the sharpness level of the Display H position Adjust the position of the display horizontally. V position Adjust the position of the display vertically. Phase Adjust the clock phase of the display. Frequency Adjust the clock frequency of the display Mode Select the video aspect ratio. It depends on the input video format. COLOR TEMP Choose different preset color temperatures (6500/7300/9300) or set your own customized color parameters. Red /Green / Blue GAIN Adjust the Red/ Green / Blue Gain Language Select the OSD language Factory recall Recall the factory setting value. Power On time Displayed the total power on time. Information Displayed the resolution of input signal Color Set the color (saturation) level Tint(Hue) Set the hue level. Only for the “NTSC” system Video Format Select the corresponding input video system. “Auto” setting means monitor automatically recognize the input video system. – Default setting AUTO, NTSC M, NTSC 4.43, PAL M, PAL BGDHI, PAL N SECAM Self Test Pattern To enter auto burn-in mode, press “Up” key first and then “Sel” key simultaneously for 3 seconds. On this mode, Red – Green – Blue – White – Black test pattern will be displayed. Press Menu key for returning normal display mode. * Brightness and Contrast value can be set individually for each input mode. * Color Temperature can be set individually for RGB and Video (S-Video). Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 3. CONNECTOR PIN DESCRIPTIONS 3-1. 15 Pin D-SUB Connector Shape and pin number Pin Description Pin Description Red No Connection Green 10 Ground - Sync 11 12 Blue 11 No Connection 13 Ground 12 No Connection Ground 13 Horizontal Sync 14 Ground - Red 14 Vertical Sync 15 10 Ground - Green 15 No Connection Ground - Blue 3-2. Serial(RS-232C) Connector Shape and pin number Pin Description Pin Description DCD DSR RXD RTS TXD CTS DTR N/A Ground 3-3. USB Connector Shape and pin number Pin Description +5V DATA (DN) DATA (DP) 0V Cable Shield Shell Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 4. STANDARD DISPLAY MODE No. Mode Horizontal Frequency Polarity Resolution Vertical Frequency Polarity Pixel clock 720 x 400 31.47 KHz 70.0 Hz 28.322 MHz 640 x 480 31.47 KHz 60.0 Hz 25.175 MHz 640 x 480 35.00 KHz 66.7 Hz 30.240 MHz 640 x 480 37.86 KHz 72.8 Hz 31.500 MHz 640 x 480 37.50 KHZ 75.0 Hz 31.500 MHz 800 X 600 35.16 KHz N/P 56.3 Hz N/P 36.000 MHz 800 X 600 37.88 KHz 60.3 Hz 40.000 MHz 800 X 600 48.08 KHz 72.2 Hz 50.000 MHz 800 X 600 46.87 KHz 75.0 Hz 49.500 MHz 10 832 X 624 49.73 KHz 74.6 HZ 57.284 MHz 11 1024 X 768 48.36 KHz 60.0 Hz 65.000 MHz 1024 X 768 56.49 KHz 70.1 Hz 75.000 MHz 1024 X 768 60.02 KHz 75.0 Hz 78.750 MHz 1280 X 1024 63.98 KHz 60.0 Hz 108.00 MHz 1280 X 1024 79.98 KHz 75.0 Hz 135.00 MHz 12 VGA SVGA XGA 13 14 15 SXGA Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004 5. MECHANICAL STRUCTURE Model No. : EFL-1903X Approval No.: 19-SS-STD Engineering Specification Revision No.: 2.2 Issue Date: Aug. 03. 2004
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2004:09:17 09:35:04+09:00 Modify Date : 2004:09:17 09:35:04+09:00 Page Count : 12 Creation Date : 2004:09:17 00:35:04Z Mod Date : 2004:09:17 00:35:04Z Producer : Acrobat Distiller 5.0 (Windows) Author :EXIF Metadata provided by EXIF.toolsMetadata Date : 2004:09:17 00:35:04Z Creator : Title : Microsoft Word - EFL1903X-STD-R22.doc