Elec Tech 546681XX LED Ceiling light User Manual manual

Elec-Tech International Co., Ltd. LED Ceiling light manual

User manual

ᒯьᗧ䊚⏖䗮⭥≄㛑ԭᴹ䲀ޜਨELEC-TECH INTERNATIONAL CO., LTD. ℶ ❐ 広 㢝 ⃵Product Instruction Manual ӗ૱਽〠˖ LED੨亦⚟Product Name: LED cealing lamp රਧ㕆⸱Model No.˖ 54668162⭏ӗ୶˖ᒯьᗧ䊚⏖䗮⭥≄㛑ԭᴹ䲀ޜਨManufacturer: Elec-tech International.,Co.Ltd ൠ൰˖ᒯьⴱ⨐⎧ᐲୀᇦ⒮䭷䠁ࠔ䐟1ਧAddress: Guangdong Province Zhihai City, Tanjiawan, No.1 Jinfeng Rd ⭥䈍Tel˖0756-3390990ՐⵏFax˖0756-3390778㖁൰Web˖www.electech.com.cn
ⴞᖅContent1.ӗ૱ㆰӻProductIntroductionͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ2 ӗ૱᧿䘠ProductDescriptionͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ2ӗ૱⽪᜿മSchematicDiagramͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ22.ӗ૱⢩ᙗProductFeatureͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ2ӗ૱⢩⛩ProductcharacteristicͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ2ᢰᵟ৲ᮠSpecificationͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ3䝽ݹᙗ㜭LightDistributionͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ43.ᆹ㻵ᯩ⌅MethodofapplicationͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ4Ͳ74.㔤ᣔ䈤᰾MaintenanceInstructionͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ75.⧟ຳ㾱≲EnvironmentalrequirementͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ86.ӗ૱ᢗ㹼ḷ߶ProductcarriedstandardͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ87.व㻵䈤᰾PackageinstructionͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ8व㻵㿴ṬPackagespecificationͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ8व㻵␵অPackagelistͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲͲ8
1.ӗ૱ㆰӻProduct Introduction 1.1. ӗ૱᧿䘠˖Product Description 1ཆᖒቪረ˖ 305x85mm˗Dimension:305x80mm2ᓅⴈ䫱ᶯ+௧㊹ˈ⚟㖙ѪPMMAݹᆖᢙᮓᶯ˗Lampplate:SPCCPowderspray,lampcover:PMMAopticaldiffuser3޵㖞䳄⿫]LJEHH⭥Ⓚ+䱢⚛⭥Ⓚⴂ˗builtͲinzigbeedrive&firepreventiondrivebox4ӯݹ2835⚟⨐DŽEverlightͲLEDͲ28351.2. ӗ૱⽪᜿മ˖Product schematic diagram: 2.ӗ૱⢩ᙗ Product Featuers: 2.1. ӗ૱⢩⛩Product characteristics ˖a:zigbeet䈳ݹ䈳㢢ˈਟԕ䙊䗷zigbee᧗ࡦˈ࠷ᦒн਼㢢⑙઼ӞᓖDŽb. 䮯ሯભ˄5зሿᰦԕк˅ˈᱟ㦗ݹ⚟7ؽሯભ˗Long lifetime (above 50,000hrs), 7 times of lifetime of fluorescent lamp: c. 儈᭸㢲㜭⧟؍˄14W LED ੨亦⚟⚟ਟԓᴯ60W ⲭ⛭⚟ˈ∄ⲭ⛭⚟ⴱ⭥60ˁ˅˗High efficiency, energy saving, environmental friendly (A 14W led lamp can replace a 60 w electric incandescent lamp , saving 60% of energy ) d. 㙀ߢࠫ,ᣇ䴷㜭࣋ᕪ,ᰐ㍛ཆ㓯઼㓒ཆ㓯䗀ሴ˗䖜ᦒ᭸⦷儈㜭䘲ᓄᚦ࣓⧟ຳˈ㜭┑䏣߉ᆇᾬ,䞂ᓇ,ᇦት,୶൪ˈᆖṑˈമҖ侶ㅹ਴⿽֯⭘൪ਸDŽImpact resistant, shock resistant, no UV and IR radiation: high conversion rate and adaptable to severe environment , universal application to office ,hotel ,supermarket ,school and library ,etc e.㔯㢢⧟؍ˈᰐᴹᇣ≄փᧂ᭮ˈ֯⭘✝䟿վˈᆹޘਟ䶐DŽGreen Initiative, no harmful gas is emitted, low heat is generated while used, safe and reliable . f.ݹ㢢㓟↓ˈ֯⭘䗷〻ѝᰐ仁䰚ˈᨀ׋ᴤྭⲴ㿶㿹ᝏਇˈ؍ᣔӪ⵬㿶࣋DŽAuthentic and pure light color, no flicker, protecting your eyes while providing better visual enjoyment .
2.2 ᢰᵟ৲ᮠSpecification亩ⴞ/অսItem/৲ᮠParameter⭥≄৲ᮠElectronicratings仍ᇊᮤ⚟࣏⦷/WRatedPower/W 14W 仍ᇊ䗃ޕ⭥঻/VRatedInputvoltage/V AC120V仍ᇊᐕ֌仁⦷/HzFrequency/Hz 60Hz 仍ᇊ⭥Ⓚ᭸⦷/%RatedPowerefficiency 82% 仍ᇊ࣏⦷ഐᮠ˄PF˅RatedPowerFactor 0.9仍ᇊ䗃ޕ⭥⍱/ARatedInputcurrent/A 0.12A仍ᇊᙫ䉀⌒ཡⵏRatedIͲTHD <20% ᱟ੖䈳ݹᱟˈzigbee䈳ݹ䈳㢢仍ᇊR9RatedR9 >15 ݹⓀ৲ᮠPhotometricratingsLED㊫ර/ᮠ䟿LEDtype/Qty. EverlightͲ5630D/64PCSᮤ⚟ݹ䙊䟿/LmRatedLumenOutput 2700K˙1000lm5000K>1000lm㢢⑙/KCCT 2700KͲ5000K ᱮ㢢ᤷᮠ/RaCRI ш80ݹᶏ䀂BeamAngle ш110 ⢙⨶৲ᮠPhysicalinformationᶀ䍘Material SPCC+PMMAᐕ֌⑙ᓖoperatingtemperature Ͳ20̚40ćۘᆈ⑙ᓖstoragetemperature Ͳ40̚60ć䱢ᣔㅹ㓗IPrating IP20⚟ާ㿴Ṭ(L×W×H)/mmLuminairedimension(L×W×H)/mm 305x85 ߰䟽/gNetweight 465g䇮䇑ሯભ/hrsLifetime/hrs 50000h 2.3 䝽ݹᴢ㓯 Light distribution ˄䝽ݹᴢ㓯മLight distribution pattern˅˄➗ᓖ࠶ᐳമ Illuminance distribution ˅
3ᆹ㻵ᯩ⌅ Installation Instructions 1. 䘶ᰦ䪸᯻䖜ሶ⚟㖙ਆлDŽPut the Fixture flat on the desktop, turn the lamp shade counterclockwise , and then take out the lamp shade DŽ2. ሶ#8-32 㷪䪹പᇊ൘ཙ亦кⲴ᧕㓯ⴂкDŽInstall the electrical box screws˄#8-32UNC˅ in the junction box. 3. ሶ⚟кⲴ唁㓯о᧕㓯ⴂѝ L㓯⴨䘎ˈⲭ㓯о N㓯⴨䘎ˈ㔯㢢㓯оൠ㓯⴨䘎ˈ❦ਾ⭘᯻ᑭሶйᶑ㓯ᤗ㍗DŽConnect the black color L line(Mark 1) to the L line come out from junction box with the wirecap. Connect thewhite color N line(Mark 2) to the N line come out from junction box with the wirecap. Connect green color ground line(Mark 3) to the ground line come out from junction box with the wirecap.
4. ሶ⚟ާкѝ䰤ᆹ㻵ᆄሩ߶᧕㓯ⴂкⲴ㷪䪹྇кDŽPut the central holes of the fixture plate across the screw of the junction box. 5. ᤹㇝ཤᯩੁ᯻㍗⚟ާˈ޽ሶ㷪䪹䬱㍗DŽRotate fixture plateperthe direction of arrow and lock it tightly with the screw lock 6. ᧕䙊⭥Ⓚᔰޣˈ⛩Ӟ⚟ާˈ❦ਾ亪ᰦ䪸᯻䖜ᆹ㻵⚟㖙DŽconfirm the fixture installed firmly, switch on the power , make sure the lamp lights, and then turn clockwise and mount with shade 7. ֯⭘ Wink ᶕ᧗ࡦ 12 ረ੨亦⚟DŽControl the Light with the Wink app 1. ᡻ᵪл䖭 Wink Appˈᒦࡋᔪањ䍖ਧDŽDownloading the Wink App From your smart device’s App Store, download the Wink app to your smart device, then create a Wink account.
2.䘎᧕ࡠ Wink HUBDŽConnecting to the Wink HUB ᢃᔰ Appˈ䘹ᤙ␫࣐ӗ૱ˈ޽䘹ѝ Wink HUB 㖁ޣˈ᤹➗᡻ᵪкⲴᨀ⽪׍⅑ᆼᡀDŽOpen the app and select add a product. Then choose the Wink HUB and follow the instructions in the app. ⌘᜿˖ሶ㖁ޣ䘎᧕൘䶐䘁ӗ૱䱴䘁ⲴൠᯩDŽNOTICE: Be sure your Wink HUB is plugged in and within range of your LED Downlight. 2. ⛩Ӟ੨亦⚟ˈ䘎᧕㖁㔌ᡀ࣏ਾˈ⚟Պ䰚⛱ 3⅑DŽConnecting to the network Turn on your LED Downlight. The light will blink three times if pairing is successful. ⌘᜿˖ྲ᷌ᜣ㾱֯⭘䈳ݹಘ䈳ݹˈਟԕሶ䈳ݹಘ䈳ࡠᴰབྷ㤳ത֯ᗇݹ᭸䗮ࡠᴰྭ᭸᷌DŽྲ᷌䘎᧕䎵ᰦˈ䈧䟽ᯠ䇮㖞DŽݸޣ䰝੨亦⚟ˈڌ⮉ 3。ˈ޽⛩Ӟˈ㔤ᤱ 3。DŽ䟽༽ԕкࣘ֌ 5⅑DŽ⚟Պ䰚⛱ 3⅑ˈ㺘᰾ਟԕᡀ࣏䘎᧕㠣 App ҶDŽNOTICE: If using a dimmer with these lights, for best results set your dimmer at the highest setting. NOTICE: Reset your light if the pairing is taking longer than expected. Turn off your light for 3 seconds, then turn it back on for 3 seconds. Repeat these steps five times. The light will blink and then is ready for connecting to the Wink HUB.
4.⧠൘ˈ֐ਟԕ֯⭘ WinkApp ᶕᲪ㜭᧗ࡦ↔Ⅾ੨亦⚟DŽReadyNow that the hub’s connected you are ready to control your downlight. 4.㔤ᣔ䈤᰾Maintenance instruction Ѫᔦ䮯֯⭘ሯભ䈧य֯⭘䞂㋮ㅹᥕਁᙗⓦࡲᬖᤝ⚟փ˗Do Not use volatile solvent such as alcohol to clean the troffer.  ␵⌱ᰦਟԕ֯⭘Ḅỹᐳ⋮㛕Ⲳ≤ᤗᒢਾᬖᤝ⚟փ˗Use soft cotton cloth with suds to clean the troffer .  䶎уъӪ༛䈧य᣶؞⚟ާ˗Non-profecssional Do not attempt to take apart and repair the troffer .  䈕⚟ާ⭥ⓀѪу⭘䘲䝽Ⲵᚂ⍱⭥Ⓚˈ䈧य⿱㠚ᴤᦒ⭥ⓀDŽPlease use the constant-current driver exclusively adaptive to the troffer, do not change the driver without permission . 5ˊ⧟ຳ㾱≲Environment requirement ֯⭘⧟ຳ⑙ᓖOperating temperature ˖-20̚40ć˗ᆈ䍞⧟ຳ⑙ᓖStorage temperature ˖-40̚60ćDŽ6ˊӗ૱ᢗ㹼ḷ߶Product carried standard UL-1598/UL8750/ENERGY STAR7ˊव㻵䈤᰾Package Instruction व㻵㿴ṬPacking Specification व㻵␵অ˖Package list
व㻵ⴂቪረ Package size ⚟ާᮠ䟿/㇡ Lamp Qty./box ߰䟽 Net weight ∋䟽 Gross weight ⢙૱਽〠 Item ᮠ䟿Qty. ੨亦⚟ Ceiling lamp 1 䈤᰾Җ Instruction manual 1 㷪䪹 screw 2 ᧕㓯ᑭ Wiring cap 3 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. The distance between user and products should be no less than 20cm La distance entre l'utilisateur et de produits ne devrait pas être inférieure à 20cm The distance between user and products should be no less than 20cm

Navigation menu