Electra 2400 Video transmitter User Manual Installation instructions

Installation instructions

• 1. Connect the input cable (A) to the video source.

• 2. Make sure that the antenna (B) is facing the receiver.

• For best performance make sure that the antenna is

vertical and that it is clear of any obstructions.

• LEGEND

• Yellow: video input

• Orange: control input

• Red: n/c

• Brown: ground/common

• Black: +6-12Vdc

• Changes or modifications not expressly approved by

Electra could void the user’s authority to operate the

equipment.

SPECIFICATIONS

FREQUENCY: 2410-2475MHz

POWER OUT PUT: 50mV/METRE @3 METRES

VOLTAGE: 6-12v DC

CURRENT: 26 mA

VIDEO INPUT: 1V P-P 75 ohm

•