Electra T2490 T2490 Video Transmitter User Manual TC 900HP INSTRUCTIONS

Electra Enterprises T2490 Video Transmitter TC 900HP INSTRUCTIONS

Users Manual

Download: Electra T2490 T2490 Video Transmitter User Manual TC 900HP  INSTRUCTIONS
Mirror Download [FCC.gov]Electra T2490 T2490 Video Transmitter User Manual TC 900HP  INSTRUCTIONS
Document ID359039
Application IDcv+ZgDtM7op5AbehlHu6Pw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.71kB (108931 bits)
Date Submitted2003-09-22 00:00:00
Date Available2003-09-22 00:00:00
Creation Date2003-09-17 08:27:32
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-09-17 08:27:39
Document TitleTC-900HP INSTRUCTIONS
Document CreatorAcrobat PDFMaker 5.0 for PowerPoint
Document Author: Jeff Johnson

T-2490
2.4GHz 2 Channel 350mW Super Power Tx Directional
Transmitter Set-up:
1.
2.
3.
4.
5.
Connect Video input "A " RCA female to video camera source
Connect Audio input "B" RCA female to the audio source.
Connect Antenna to Transmitter “C”
Connect Power input “D” to the power source (Minimum voltage 7.5V DC Maximum voltage 9V DC).
DO NOT USE ANY OTHER POWER SUPPLY. YOU MUST ONLY USE PROVIDED POWER SUPPLY
Select Transmitter Channel by adjusting dip switches - See Figure 1 Please note: once desired channel has
been selected you must power down the transmitter then power back up to lock onto selected channel
Troubleshooting:
Check power supply. Most troubleshooting issues are caused by inadequate power supply
Note : Minimum voltage required to properly operate transmitter is 7.5 volts DC
Do not encapsulate the antenna in any kind of metal enclosure. Plastic, wood or other similar materials are
satisfactory.
Directional Transmitter- Optimum transmitting distance is realised when the transmitting antenna and the
receiving antenna are both facing each other.
Confirm the set up for receiver is complete. Power is “ON”, confirm the antenna is attached correctly.
Check that the “Video Out” cables from receiver to monitor/time-lapse are connected properly.
Consider the following abilities when transmitting through building materials.
Penetration through:
Wood/Drywall - good
Concrete/Cinder Block - poor
Tinted/UV Coated Windows - poor
Sheet Metal - none
WARNING "This device shall be installed in such a location as to prevent the
general population from approaching within 20cm of this device"
Parts List
¾1x- 2.4GHz Transmitter
¾1x- 7.5 VDC Power Supply
¾1x- Directional Patch Antenna

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:09:17 08:27:39-03:00
Create Date                     : 2003:09:17 08:27:32-04:00
Page Count                      : 1
Creation Date                   : 2003:09:17 12:27:32Z
Mod Date                        : 2003:09:17 12:27:32Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Jeff Johnson
Metadata Date                   : 2003:09:17 12:27:32Z
Creator                         : Jeff Johnson
Title                           : TC-900HP  INSTRUCTIONS
Page Mode                       : UseNone
Page Layout                     : SinglePage
Tagged PDF                      : Yes
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NIMT2490

Navigation menu