Electronic Systems Technology ESTEEM195EG-1 ESTEEM 195Eg User Manual Chapter 0 Front Cover 195Eg
Electronic Systems Technology ESTEEM 195Eg Chapter 0 Front Cover 195Eg
Contents
user manual ch 1 to 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 977680 |
| Application ID | OGhtaVzXtIaJaelHM2PGXA== |
| Document Description | user manual ch 1 to 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 188.41kB (2355095 bits) |
| Date Submitted | 2008-07-29 00:00:00 |
| Date Available | 2008-08-01 00:00:00 |
| Creation Date | 2008-07-29 11:12:16 |
| Producing Software | Acrobat PDFWriter 5.0 for Windows NT |
| Document Lastmod | 2008-07-29 11:14:02 |
| Document Title | Chapter 0 - Front Cover 195Eg.doc |
| Document Creator | Microsoft Word - Chapter 0 - Front Cover 195Eg.doc |
| Document Author: | Marske |
ESTeem MODEL 195Eg USER’S MANUAL Manual Revision 2.5 June 2008 Electronic Systems Technology, Inc. ESTeem MODEL 195Eg USER’S MANUAL Manual Revision 2.5 Firmware Version 302.8.102 and above June 2008 Prepared by: Name: Title: Eric P. Marske Product Manager Date: Approved by: Name: Title: Tom L. Kirchner President Date: COPYRIGHT INFORMATION This manual and the firmware described in it are copyrighted by EST, with all rights reserved. Under the copyright laws, this manual or the firmware internal to the ESTeem unit may not be copied, in whole or part, without the written consent of EST. Under the law, copying includes translating into another language. Electronic Systems Technology (EST) cannot guarantee that you will receive notice of a revision to the firmware described in the manual, even if you have returned a registration/warranty card received with the product. You should periodically check with your authorized EST dealer or call factory direct. EST and the EST logo are registered trademarks of Electronic Systems Technology, Inc. Simultaneously published in the United States and Canada. All rights reserved. WARRANTY INFORMATION Electronic Systems Technology, Inc., (hereinafter EST) expressly warrants its products as free of manufacturing defects for a period of one year from the date of sale to first user/customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED AND THERE IS EXPRESSLY EXCLUDED ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO OTHER WARRANTY GIVEN BY ANY EMPLOYEE, AGENT, DISTRIBUTOR OR OTHER PERSON WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON EST. LIMITATION OF LIABILITY: EST's liability shall be limited to refunding of purchase price, repair or replacement of product. IN NO EVENT SHALL EST HAVE LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES CAUSED DIRECTLY OR INDIRECTLY BY THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY INTERRUPTION OF SERVICES, LOSS OF BUSINESS OR ANTICIPATORY PROFITS. IN NO EVENT SHALL EST BE LIABLE FOR ANY DAMAGES WHATSOEVER IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT. In the event that a unit or part requires replacement or factory servicing, the following conditions apply: a) b) Customer must obtain from EST an authorized RMA (Return Materials Authorization) number (call 509-735-9092 Customer Support) before shipment of product or parts to EST for any reason; If the whole unit is shipped, it must be in its original carton and shipping components, or a carton and shipping components supplied by EST, or if parts only are shipped, they must be packaged and cushioned so as to prevent damage in transit and shipped freight prepaid; PRODUCT WILL BE CONSIDERED OUT OF WARRANTY IF: a) b) c) d) e) If the product is damaged due to improper or abnormal use, abuse, mishandling, accident or improper maintenance or failure to follow operating instruction; If the product is defective as a result of sand, dirt, or water damage; If any factory-sealed enclosure has been opened or shows evidence of an attempt to be opened; If defects or damage are caused by the use of unauthorized parts or unauthorized service; If the product has had its serial numbers altered or removed. Warranty repair form must be accompanied by proof of user's purchase of unit. Product must be shipped to the manufacturer at the following address: Electronic Systems Technology 415 North Quay Street Building B-1 Kennewick, Washington USA 99336 ADDITIONAL SERVICE: If EST releases an improvement update to firmware internal to the ESTeem unit during the 90 day period after the unit was purchased by the first user/customer, EST will update the applicable unit with the revised version at no charge other than for UPS handling and shipping to and from your location to the EST factory. Return of any such item must be accompanied with proof of purchase. TABLE OF CONTENTS CHAPTER 1 – INTRODUCTION Before You Begin 1-1 Model 195Eg Overview 1-1 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1-1 1-2 1-3 1-3 1-3 1-4 Model 195Eg Access Point Configurations Figure 1: Single Access Point Bridge Diagram Figure 2: Multiple Access Point Bridge Diagram Figure 3: Access Point Router Diagram Figure 4: Access Point Masquerade Diagram --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 2-1 2-1 2-1 2-2 2-2 Model 195Eg Access Point Repeater with Clients Configurations Figure 5: Access Point Bridge Repeater with Clients Diagram Figure 6: Access Point Router Repeater with Clients Diagram Figure 7: Access Point Masquerade Repeater with Clients Diag. ------------------------------------------------------------------------------------------------------------------------------------- 2-3 2-3 2-3 2-4 Model 195Eg Building to Building Configurations Figure 8: Building to Building Configuration Diagram Figure 9: Building to Building with Repeater Diagram Figure 10: Building to Building Router Diagram ------------------------------------------------------------------------------------------------------------------------------------- 2-4 2-4 2-5 2-5 Model 195Eg Complete Wireless Solutions Figure 11: Complete Bridge Network Solutions Diagram Figure 12: Complete Router Network Solutions Diagram ----------------------------------------------------------------------------------------- 2-6 2-6 2-7 Model 195Eg Serial Network Configurations Figure 13: Point to Point Serial Diagram Figure 14: Point to Point with Repeater Serial Diagram Figure 15: Multi-point Serial Diagram Figure 16: Ethernet and Serial Diagram --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 2-8 2-8 2-8 2-9 2-9 Overview Quick Start Guide --------------------------------------------- 3-1 3-1 Model 195Eg Hardware Layout Required Hardware Front Panel Overlay Diagram Antenna Port Overview Antenna Configuration Hardware Configuration Diagram ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 3-1 3-1 3-2 3-2 3-3 3-3 Model 195Eg Configuration Modes Access Point Modes Access Point Repeater Self-Healing Mesh Network Station (802.11g Client) Modes Serial Applications (Optional) CHAPTER 2 – CONFIGURATION DIAGRAMS CHAPTER 3 – STARTING OUT Revised: 18 Jun 08 Page 1 EST P/N AA107G TABLE OF CONTENTS ESTeem Discovery Utility Installation Operation Configuring the IP Address ------------------------------------------------------------------------------------------------------------------------------------- 3-5 3-5 3-6 3-6 Using The RS-232 Interface Installing ESTeem Utility Program Programming Using the RS-232 Port ----------------------------------------------------------------------------------------- 3-7 3-7 3-7 CHAPTER 4 – WEB CONFIGURATION 4-1 Logging Into Web Configuration Manager Web Configuration Manager Top Menu Setting ModemID Field Status Menu System Log Screen Setup Screen Advanced Configuration Screen Backup Screen Restore Screen Software Update System Reboot --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 4-2 4-2 4-2 4-3 4-5 4-5 4-6 4-6 4-7 4-8 4-8 ------------------------------------------------------------------------------------------------------------------------------------- 5-1 5-1 5-2 5-2 CHAPTER 5 – EXAMPLE CONFIGURATIONS Programming Example Programming Example #1 Diagram Programming Example #2 Diagram Table 1: Example System Configuration Table Example 1 – Plant Network (Access Point Router Repeater) 5-3 Example 2 –Repeater (Access Point Bridge Repeater) 5-13 Example 3 – Remote Building (Access Point Bridge Repeater) 5-18 Example 4 – EtherStation Mode 5-19 Example 5 – Station Router Mode 5-21 Example 6 – Station Masquerade Mode 5-25 CHAPTER 6 – SERIAL APPLICATIONS 6-1 Serial Overview Serial Connections Second Ethernet Port Revised: 18 Jun 08 --------------------------------------------- Page 2 6-1 6-1 EST P/N AA107G TABLE OF CONTENTS 6-1 Serial Configuration CHAPTER 7 – REPEATING FEATURES Overview ESTeem Mesh Network Configuration --------------------------------------------- 7-1 7-1 7-1 Spanning Tree Protocol (STP) Overview Phases Priority and Path Cost Root Bridge --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 7-2 7-2 7-3 7-4 7-4 7-5 Redundant Backup CHAPTER 8 – ANTENNA SETUPS Antenna and Cable Configurations (Pole Mount) 8-1 Antenna and Cable Configurations (Cabinet Mount) 8-2 Coaxial Cable Attenuation 8-2 Antenna Diversity 8-4 Antenna Port Selection 8-4 Assembling the AA195PM Outdoor Pole Mounting Kit 8-4 Model 195Eg Series with Direct Mount Dual Diversity Antennas Model 195Eg Direct Mount Antennas with Surge Protection Model 195Eg Series with External Mount Antenna Model 195Eg External Mount Antenna with Surge Protection Model 195Eg Series Cabinet Mount Antenna 8-11 8-12 8-13 8-14 8-15 Fresnel Zone 8-16 APPENDIX A – FCC INFORMATION APPENDIX B – SPECIFICATIONS 195Eg Specifications Case Diagram Antenna Specifications ------------------------------------------------------------------------------------------------------------------------------------- B-1 B-2 B-3 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- C-1 C-1 C-2 C-2 APPENDIX C – INTERFACE PORTS Ethernet Interface Setting DHCP Server RS-232 Programming Port Pin-Out RS-232 Data Port Pin-Out Revised: 18 Jun 08 Page 3 EST P/N AA107G TABLE OF CONTENTS APPENDIX D – RADIO CONFIGURATION Frequency of Operation Setting Data Rates Setting RF Power Level Average RF Output Power --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- D-1 D-1 D-3 D-4 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F-1 F-2 F-4 F-4 F-6 F-7 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- G-1 G-4 G-5 G-6 APPENDIX E – SECURITY APPENDIX F – TROUBLESHOOTING Testing Communication Link Viewing RF Data Rates Signal Strength vs Data Rates Updating 192E to Operate with 195Eg Setting Maximum Distance Value Troubleshooting Tips APPENDIX G – Utilities and Features Using ESTeem Discovery Program Using EtherStation Status Program Setting Local Time 195Eg Configuring Time Server APPENDIX H – Quick Start Guide Revised: 18 Jun 08 Page 4 EST P/N AA107G CHAPTER 1 INTRODUCTION BEFORE YOU BEGIN Thank you and congratulations on your purchase of the ESTeem Model 195Eg Wireless Ethernet Radio Modem! This manual was written to help both the first time and advanced user of the 195Eg configure the radio modem for your application. If this your first time configuring the 195Eg and you would like to get going as soon as possible, we recommend using the 195Eg Quick Start Guide provided with the modem. A copy of the guide is listed in the appendix of this manual for your reference. The ESTeem 195Eg is a very versatile wireless Ethernet networking device. To keep the manual usably short, many of the application descriptions and programming details assume the user has a good working knowledge of the following network concepts: • • • • • • • General Ethernet networking and the configuration of LAN topologies Common Ethernet terminology and acronyms TCP/IP network protocol structure and how to configure TCP/IP networks and subnets How to identify and set the TCP/IP address on your computer Have administrator privileges to the computer and network you are configuring If using routing protocols, you must be able to identify and configure the network routers, gateways and firewalls You must be familiar with using web browser software such as Internet Explorer, Netscape or Mozilla If you are unfamiliar with any of the above networking concepts, you may need to contact your network administrator for assistance. MODEL 195Eg OVERVIEW The ESTeem Model 195Eg is an IEEE 802.11g protocol compatible wireless LAN transceiver that can be used to build a Wireless Local Area Network (WLAN) for line-of-sight distances to 13 miles for fixed base and 5 miles for mobile applications. The 195Eg can provide RF data rates up to 54 Mbps and can have an optional serial port for legacy RS-232 devices. The Model 195Eg is also downward compatible with IEEE 802.11b protocol networks. The IEEE 802.11 WLAN was designed to look and feel like any IEEE 802 wired LAN. The Model 195Eg is a very sophisticated networking device that can be configured for multiple modes of operation depending upon the needs of the wireless and wired LAN system. The following configuration modes are provided as an overview of the basic network types, as all possible network configurations can not be listed. For further help in selecting the correct network type, please contact Customer Support at 509-735-9092. Revised: 23 Jan 08 Figure 1- Access Point Bridge Diagram 1-1 EST P/N AA107G CHAPTER 1 INTRODUCTION MODEL 195Eg CONFIGURATION MODES The Model 195Eg can be configured for multiple modes of operation without any changes to the hardware: Access Point Modes 1. Access Point Bridge Mode. When the Model 195Eg is configured as an Access Point it will provide a wireless bridge from a hardwired Local Area Network (LAN) to laptops, office computers, Personal Digital Assistants (PDA’s), video cameras, PLC’s, etc. that have integral or external 802.11g or 802.11b wireless devices or other Model 195Eg modems in client modes. Multiple Access Point Bridge modems can be physically connected to the same network (LAN) or through a radio link using the Figure 2 – Repeater Mode Diagram Access Point Repeater mode to provide overlapping, seamless Ethernet communication for mobile devices. The ESTeem Model 195Eg in Access Point Bridge mode will pass all network traffic between connected devices including global network broadcasts. See Figure 1. 2. Access Point Router Mode. In this mode the ESTeem Model 195Eg will function as a router between the wired Ethernet network, connect to the 195Eg’s Ethernet port, and the wireless network of 802.11g/b clients and other 195Eg’s in repeater peer mode. As in all standard router configurations, the wireless and wired Ethernet networks will need to be on separate subnets. To communicate from the wired Ethernet network to devices on the wireless network, a separate router (in addition to the Model 195Eg) is required. The 195Eg in Access Point Router mode will pass network traffic for connected devices but will block global network broadcasts from the wired network. This mode of operation should be used instead of the Access Point Bridge mode when a separation between networks is required or the ESTeem is connected to larger LAN Networks that will continuously send global network broadcasts (Figure 2). 3. Access Point Masquerade Mode. The Access Point Masquerade mode is a special use of the Access Point mode where the Model 195Eg will connect 802.11g or 802.11b wireless devices as clients into a single static IP address on a wired network. Data requests from the wireless network will be processed through the Access Point Masquerade 195Eg, but any request from the wired Ethernet network to devices on the wireless network will Figure 3- Access Point Masquerade Diagram Revised: 23 Jan 08 1-2 EST P/N AA107G CHAPTER 1 INTRODUCTION be rejected similar to the operation of a “firewall”. The 195Eg will hide all the IP addresses connected on the wireless link. You should use this mode of operation if Model 195Eg is connected directly to the Internet with a static IP address (DSL, T1, etc.) and you want the wireless clients to access the information through the Model 195Eg (Figure 3). This mode should also be used for attaching the Model 195Eg to a network where few IP addresses are available or a firewall for the wireless clients is required. 4. Access Point Repeater. The Access Point Repeater is a unique enhancement of the 802.11g Access Point mode only available the ESTeem Model 195Eg. The Access Point Repeater can be used with any of the above Access Point modes. With this repeater feature enabled, the Model 195Eg Access Points do not have to be hardwired together on the same physical LAN to provide seamless Ethernet communication for roaming 802.11g/b Clients. In addition to greatly extending the Access Point canopy range, the Model 195Eg will also bridge any Ethernet device or Ethernet network connected to the unit over this same wireless Ethernet network. This mode gives the user the features of a point to multi-point bridge network but also allows 802.11g/b Client devices or the Model 195Eg in the Client mode to simultaneously roam under the network canopy. 5. Self-Healing Mesh Network. If multiple Access Point Repeater routes are configured to the same destination ESTeem, the 195Eg will create a “self-healing” mesh network by automatically re-routing data through alternate paths to reach its destination if the primary path is inoperable. The routing and priority of alternate paths is completely user configurable. See Figure 4. Station (802.11g Client) Modes Access Point/Repeater Access Point/Repeater Access Point/Repeater Access Point/Repeater Access Point/Repeater Remote Site Remote Site Remote Site Client Mode Vehicles Access Point/Repeater Access Point/Repeater Access Point/Repeater Remote Site Remote Office Remote Site Access Point/Repeater Remote Site Remote Site Access Point/Repeater Access Point/Repeater Access Point/Repeater Remote Site Remote Site Remote Site Main Office 6. 7. Figure 4 – Mesh Network Diagram EtherStation Mode. This is a unique feature of the Model 195Eg when used in any Access Point network. When the 195Eg is configured in the EtherStation Mode and attached to a single Ethernet Device, the Model 195Eg will emulate an 802.11g PCMCIA wireless card in functionality for communication as an 802.11g client. The 195Eg will seamless roam under the radio canopy of Access Point and can provide greatly increased range over a Wireless LAN Card for mobile Ethernet devices such as vehicles, forklifts, cranes, etc (Figures 1-3). Station Router Mode. The Station Router mode will also function as an 802.11g client, similar to EtherStation, but will allow multiple Ethernet devices to be connected to a single 195Eg (Figure 3). The 195Eg will function as a router between the wireless client mode and the wired Ethernet devices connected to the Ethernet port. Similar in configuration to the Access Revised: 23 Jan 08 1-3 EST P/N AA107G CHAPTER 1 INTRODUCTION Point Router mode, the wireless and wired Ethernet networks will need to be on separate subnets. To communicate from wireless network to devices on the wired Station Router network, a separate router (connected to the Ethernet side of the Access Point) is required. This mode would be used where multiple Ethernet devices will be connected to a single Model 195Eg in a mobile client application and the connected Ethernet devices will need to be accessible from the Access Point’s LAN network. 8. Station Masquerade Mode. The Station Masquerade Mode is another mode where multiple devices will be connected to a single ESTeem in a mobile or Client application, but unlike the Station Router mode, the Station Masquerate will consolidate all connected Ethernet devices to a single IP address on the network. The devices connected to the Station Masquerade 195Eg will be able to access information from both the wireless and wired LAN, but will be inaccessible the other way similar in application to a firewall. This mode would be used where multiple Ethernet devices will be connected to a single Model 195Eg in a mobile application and the IP addresses for each device will be hidden from the LAN connected to the Access Point. See Figure 3. 9. Serial Applications (Optional). The ESTeem 195Eg can optionally be installed with an RS-232 data port for serial data applications run over the broadband link (Figure 5). The serial over broadband network can be used in a point-to-point or point-to-multi-point application for networking serial (RS-232c) devices, providing serial connections to legacy hardware in a new Ethernet network or providing for high-bandwidth devices (such as Video or Voice over IP) in an existing serial network. Installing the serial port option also provides a second 10/100 Base-T Ethernet port that can be used to connect a second Ethernet device without requiring a HUB/Switch or can be configured as an external Router port. Lin at -o f-S ig ht ig RS-232 Data Access Point Bridge with Repeater Mode ht Pa th f -S -o ne Li Access Point Bridge with Repeater Mode Line-of-Sight Path Remote Site Remote PLC Access Point Bridge with Repeater Mode RS-232 Data Lin e-o f-Sig ht P ath Repeater Path ight -of-S Line Remote Site & Repeater RS-232 Data Access Point Bridge with Repeater Mode NOTE: Repeater may be standalone or attached to a network or device. Note: Access Point Bridge with Repeater Mode Antenna’s shown are for illustration purposes. There are many antenna options available depending on your application. Access Point Bridge with Repeater Mode RS-232 Data RS-232 Data Remote Site Master PLC Figure 5 – Multi-point Serial Diagram To begin setup of your wireless Ethernet network you must first configure the Model 195Eg for the mode desired. Chapter 2 will show several examples of the different modes of operation to help select the correct mode for your application. Revised: 23 Jan 08 1-4 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS MODEL 195Eg ACCESS POINT BRIDGE DIAGRAMS Figure 1: Single Access Point Bridge Diagram Figure 2: Multiple Access Point Bridge (Overlapping Coverage) Diagram Revised: 23 Jan 08 2-1 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS MODEL 195Eg ACCESS POINT ROUTER DIAGRAM Figure 3: Access Point Router Diagram MODEL 195Eg ACCESS POINT MASQUERADE DIAGRAM Figure 4: Access Point Masquerade Diagram Revised: 23 Jan 08 2-2 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS MODEL 195Eg ACCESS POINT REPEATER AND CLIENT CONFIGURATION DIAGRAMS Figure 5: Access Point Bridge Repeater with Clients Diagram Figure 6: Access Point Router Repeater with Clients Diagram Revised: 23 Jan 08 2-3 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS MODEL 195Eg ACCESS POINT REPEATER AND CLIENT CONFIGURATION DIAGRAMS (Cont.) Figure 7: Access Point Masquerade Repeater with Clients Diagram MODEL 195Eg BUILDING TO BUILDING CONFIGURATION DIAGRAMS Figure 8: Building to Building Configuration Diagram Revised: 23 Jan 08 2-4 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS MODEL 195Eg BUILDING TO BUILDING CONFIGURATION DIAGRAMS (Cont.) Figure 9: Building to Building with Repeater Diagram Figure 10: Building to Building Router Diagram Revised: 23 Jan 08 2-5 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS MODEL 195Eg COMPLETE BRIDGE SYSTEM CONFIGURATION DIAGRAMS Figure 11: Complete Bridge Network Solutions Diagram Revised: 23 Jan 08 2-6 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS MODEL 195Eg COMPLETE ROUTER SYSTEM CONFIGURATION DIAGRAMS Figure 12: Complete Router Network Solutions Diagram Revised: 23 Jan 08 2-7 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS Figure 13: Point to Point Serial Diagram Figure 14: Point to Point With Repeater Serial Diagram Revised: 23 Jan 08 2-8 EST P/N AA107G CHAPTER 2 CONFIGURATION DIAGRAMS Figure 15: Multi-point Serial Diagram Figure 16: Ethernet and Serial Diagram Revised: 23 Jan 08 2-9 EST P/N AA107G
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 20 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:362d4e88-7b93-44b8-9de5-8a8c9dea9587 Modify Date : 2008:07:29 11:14:02-04:00 Create Date : 2008:07:29 11:12:16-04:00 Metadata Date : 2008:07:29 11:14:02-04:00 Document ID : uuid:14006479-c695-4e41-b67c-81a0e31278bc Format : application/pdf Title : Chapter 0 - Front Cover 195Eg.doc Creator : Microsoft Word - Chapter 0 - Front Cover 195Eg.doc Author : Marske Producer : Acrobat PDFWriter 5.0 for Windows NTEXIF Metadata provided by EXIF.tools