Electronics Tomorrow A480110813 BLE Vibration Alarm User Manual A480

Download:
Mirror Download [FCC.gov]
Document ID	2390018
Application ID	iBopQsci7q/cXukGbmB4lw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	196.52kB (2456538 bits)
Date Submitted	2014-09-16 00:00:00
Date Available	2014-09-16 00:00:00
Creation Date	2017-10-21 05:46:17
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 05:46:17
Document Title	A480
Document Creator	Adobe Illustrator CS6 (Macintosh)

Instruction Manual
[For iPod, iPhone and iPad User]
Main Unit
Location of Control
FCC ID:
PEQA480110813
Electronics Tomorrow Ltd.
Model No: A480
DC 4.5V 3 X 1.5V - - MADE IN CHINA
1. Snooze button /
LED indicator
2.
3.
4.
5.
Pair
Reset
Alarm
Battery
Compartment
6. Battery door
Features
Thank you for purchasing the Vibration Alarm. This product
is designed as a Vibration Alarm by working with your iPad,
iPhone, iPod or other iOS devices.
- Support iOS version 7 or above;
- Support Bluetooth version 4.0.
- Set wake up buzzer alarm or vibration alarm with snooze
function, up to 10 alarms.
- Take full control of the Vibration Alarm with i-device app
via Bluetooth Low Energy.
- Selectable alarm tone pattern and volume to different
alarms.
- Set count down timer.
- Monitor the battery status of the Vibration Alarm and have
low battery warning if it is at low level.
Before you start using it
• Please make sure to read the instruction manual
carefully.
• Following and respecting the instuctions in your
manual will prevent damage to your instrument and
loss of your statutory rights arising from defects due
to incorrect use.
• We shall not be liable for any damage occuring as a
result of non-following of these instructions. Likewise,
we take no responsibility for any incorrect readings
and for any consequences which may result from
them.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future
reference.
Getting started
1. Install battery:
1.1 Open the battery compartment.
1.2 Insert 3 x AAA batteries in polarity (+) and
(-) as indicated.
1.3 Close the battery compartment.
FCC ID:
PEQA480110813
Electronics Tomorrow Ltd.
Model No: A480
DC 4.5V 3 X 1.5V - - MADE IN CHINA
2. Install BleAlarm App on your mobile device.
2.1 Access app store and search for BleAlarm
2.2 Select and install BleAlarm App on your
mobile device.
BLE
ALARM
Pairing the Vibration Alarm
3.
Pair the Vibration Alarm with BleAlarm app.
3.1 Before running the BleAlarm app, make sure the
Bluetooth is turned ON at your i-device.
BLE
ALARM
3.2 After you tap the app icon
, the ‘Nearby Devices’
screen appears. You need to pair the Vibration Alarm
device before you enter the main app screen.
Pairing the Vibration Alarm
3.5 The New Vibration Alarm
will be displayed on App
and is ready for pairing.
Tap the "New Vibration
Alarm" will start the pairing
3.4 Press and hold the [PAIR]
and connection process.
button on the Vibration
Once the Vibration Alarm
Alarm device for 5
is paired, it will start time
seconds. You can find
and data synchronization.
the flashing LED will turn
from red to blue.
3.3 Tap “ Pair New Device”
to search for nearby
devices.
Pairing the Vibration Alarm
3.6 Once connected, the following information will be
synchronized:
i) Current time and date
ii) Alarms & timer setting
iii) Unit battery level
3.7 One Vibration Alarm unit can pair one idevice each
time.
3.8 One idevice can pair up to 5 Vibration Alarm units.
Rename the Vibration Alarm
4.
Rename the device.
Tap the device name (default is “Vibration Alarm”) at
the top of the screen to edit the Vibration Alarm device
name.
Battery status indicator
5. Battery status indicator
It indicates the battery level of your Vibration Alarm
device.While the battery level drops below 20%, the
battery icon is in red status and a low battery warning
will pop up to remind battery replacement.
Above 60%
Between
20% ~ 60%
Below 20%
Setting the alarm time
6.
Setting the alarm time
6.1 Tap [New Alarm] to create a new alarm or tap the
existing alarm to modify.
6.2 On alarm setting screen, you can edit and adjust the
item below:
i) Alarm Name: Tap to edit you preferred name to this
alarm.
ii) Time: Scroll up and down to adjust the alarm time.
iii) Day of Week: Tap to select which day of week to enable
the alarm.
- If none is selected, it alarms once only.
- If all days are selected, it alarms daily.
iv) Sound pattern: Tap to select which tone pattern (5
options plus one random pattern available) is applied to
this alarm.
Setting the alarm time
v)
Alarm volume level: Tap to select the alarm sound
volume level (three options: Low, Med and High).
vi) Vibration strength: Tap to select the vibration strength
(four options: Off, Low, Med and High).
6.3 Complete the alarm setting.
i)
Tap [Done] to save the alarm setting and go back to
main screen.
ii) Tap [Cancel] to restore to the original alarm setting and
go back to main screen.
iii) Tap [Delete Alarm] to delete the current alarm and go
back to main screen.
Snooze operation
7. Using the SNOOZE function
7.1 When the alarm sounds, press [Snooze] and alarm will
repeat every 5 minutes up to three times.
7.2 Above default value can be adjusted by setting the
“Maximum Snoozes” and “Snooze Duration” in the
preference screen.
To turn off the alarm
8.
To disable the alarm
8.1 When alarm sounds,
press [Snooze] once to
stop the alarm and
activate the snooze
funtion, or press [Alarm]
to disable the alarm
completely.
8.2 If no button is pressed,
The alarm will sound for
1 minute and stop
automatically. If Snooze
Enabled setting is ON,
the alarm will repeat
every 5 minutes. You can
press the [Snooze] button
to stop the alarm, or can
press [Alarm] button to
turn off the alarm and
8.3 User can tap the alarm
stop the snooze function
time to disable the alarm
completely.
completely ( Please
make sure your app is
paired with the device)
Setting the Timer
9.
To set the timer
Tap timer on main screen to go into setting screen.
9.1 You can edit and adjust items below on this screen.
i)
Timer period:
Scroll up and down to adjust the timer duration.
Sound pattern:
Tap to select the tone pattern (5 options plus one
random pattern available).
iii) Sound volume level:
Tap to select the sound volume level (Four options: Off,
Low, Med and High).
iv) Vibration:
Tap to select the vibration strength (Four options: Off,
Low, Med and High).
ii)
Setting the timer
9.2 Using the Timer
In the Home screen, tap “Start” under Timer to start
counting.
Tap “Stop” to stop counting and “Start” to start counting
again.Tap [Reset] to reset the time duration value.
Delete Paired Vibration Alarm unit
10. Delete the Vibration Alarm unit.
Tap
at Nearby Devices
screen to enter the Known
Devices page. By tapping
“Edit” and then the red minus
circle, you can select “Delete”
to erase any paired Vibration
Alarm unit.
Preference
11) Preference setting
Tap
at the main screen to enter the Preference
screen. You can edit and adjust the following items on
this screen.
11.1 Snooze Enabled: Tap to enable/disable Snooze
function. If 'Snooze Enabled' is ON, you can set:
Maximum Snoozes: The number of times to
repeat the snooze function. User can set Unlimited or
values from 1 to 9.
Snooze Duration: The time interval between snoozes.
User can set from 1 to 15 minutes.
Preference
11.2 Alarm Sound Duration: The alarm duration. User can
set from 1 to 15 minutes.
11.3 Auto DST update: It will adjust Daylight Saving Time
(DST) automatically based on your idevice time zone
setting. The alarm clock will be automatically one hour
ahead of Standard Time in summer time and will be
back to the normal Standard Time when back to winter
time, according to your idevice’s time zone.
11.4 Tap [Done] to save the setting or Tap [Cancel] to
restore the setting.
Reset the Vibration Alarm
12. Reset the Alarm
If the Vibration Alarm is not
working properly, press
RESET button to reset the
unit. During reset, the LED
flashes twice in (purple)
color and the Vibration Alarm
vibrates twice. Then the LED
will flash once per 6 seconds
in red color.
Reset the unit will break the
connection and clear the data
in your unit. Repeat step 3.3
- 3.5 to reconnect the unit. If
the unit has connected your
mobile device before, you
can select “Restore” to
resume all setting and data
or select “Erase” to start all
from scratch.
Vibration Alarm
unit
Disposal of Your Old Product
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused. When
this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of your
old products with your normal household waste. The correct disposal
of your old product will help prevent potential negative consequences
for the environment and human health.
Disposal of Flat Batteries / Accumulators
You, as the end user, are legally obliged (Battery Ordinance)
to return all flat batteries and rechargeable batteries.
Disposal in the household waste is prohibited.
“European Directive 2006/66/EC” Batteries, including
rechargeable batteries, which contain hazardous substances
are marked by symbols which indicate the prohibition of
disposal in the household waste.
The designations for the heavy metals concerned
are as follows:
Cd = cadmium, Hg = mercury, Pd = lead. You can return flat
batteries / rechargeable batteries free of charge to the
collection points in your community or anywhere where
batteries / rechargeable batteries are sold.
You thus fulfil your statutory obligations and help protect the
environment.
Caution
Replace only with the same or equivalent type of battery, please refer
to the engraved battery marks inside the battery compartment for the
correct battery polarity (+) and (-). Danger of explosion is possible if
battery is incorrectly replaced.
This product complies with the requirement of the 1999/5/EC directive.
Use this unit and mobile phone only in environments with ambient
temperatures between 0°C and 35°C.
The maximum operating temperature of the unit is 35°C
018-140077
BAC

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:09:04 17:41:34+08:00
Creator                         : Adobe Illustrator CS6 (Macintosh)
Modify Date                     : 2014:09:12 23:27:29+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : A480
Metadata Date                   : 2014:09:12 23:27:29+08:00
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Thumbnail Width                 : 12
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 2326 bytes, use -b option to extract)
Instance ID                     : uuid:3a689259-5cbb-4ae6-8883-0b88998f23f1
Document ID                     : xmp.did:163E93394A20681183D1C2E8C2DA980B
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : uuid:71334706-ce70-744e-a11f-4d795f3f3ba6
Derived From Document ID        : xmp.did:EC7F9DF32620681183D19C339129AE91
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:0180117407206811822A96B98931BEA9, xmp.iid:163E93394A20681183D1C2E8C2DA980B
History When                    : 2013:07:17 11:48:48+08:00, 2014:09:04 17:41:27+08:00
History Software Agent          : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : stock-photo-6124171-press-the-button.jpg, /Users/admin/Public/NOK/manual/A480/App photos/photo 2.PNG, stock-photo-6124171-press-the-button.jpg, stock-photo-6124171-press-the-button.jpg, /Users/admin/Public/NOK/manual/A480/App photos/photo 1-1.PNG, /Users/admin/Public/NOK/manual/A480/App photos/photo 3.jpg, /Users/admin/Public/NOK/manual/A480/App photos/low battery image.jpg, /Users/admin/Public/NOK/manual/A480/App photos/photo 5.PNG, /Users/admin/Public/NOK/manual/A480/App photos/photo 4.PNG, /Users/admin/Public/NOK/manual/A480/App photos/photo 2 copy.png, /Users/admin/Public/NOK/Product and Dummy Photos/A480/A480.psd, /Users/admin/Public/NOK/manual/A480/App photos/photo 2.PNG
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 58.998638
Max Page Size H                 : 90.000708
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, MyriadPro-Regular
Font Family                     : Arial, Arial, Myriad Pro
Font Face                       : Regular, Bold, Regular
Font Type                       : Open Type, Open Type, Open Type
Font Version                    : Version 5.01.2x, Version 5.01.2x, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Trapped                         : False
GTS PDFX Version                : PDF/X-4
Page Count                      : 22

EXIF Metadata provided by EXIF.tools