Electronics Tomorrow A60000515 Bluetooth Ambient Monitor User Manual A600 IOSandAn

Download:
Mirror Download [FCC.gov]
Document ID	2712119
Application ID	UwkepbvNDdAX8R0sVhRfBQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	254.34kB (3179215 bits)
Date Submitted	2015-08-12 00:00:00
Date Available	2015-08-12 00:00:00
Creation Date	2015-04-23 17:31:56
Producing Software	Adobe PDF library 10.01
Document Lastmod	2015-04-23 17:31:56
Document Title	A600_IOSandAn
Document Creator	Adobe Illustrator CS6 (Macintosh)

Instruction Manual
Bluetooth Alarm Clock
with temperature and humidity sensor
Main Unit
Location of Control
1. Snooze button
2.
3.
4.
5.
6.
Alarm
Pair
Scroll
Reset
Battery
Compartment
7. Battery door
8. Stand
PAIR
SCROLL RESET
1.5V''AA''
1.5V''AA''
Features
Thank you for purchasing the BLE Alarm Clock. This
product is designed as a BLE Alarm Clock by working with
your mobile devices.
- Support Bluetooth version 4.0.
- Set wake up buzzer alarm with snooze function, up to 5
alarms.
- Take full control of the BLE Alarm Clock with device app
via Bluetooth Low Energy.
- Selectable alarm tone pattern and volume to different
alarms.
- Temperature and Humidity reading whith history chart
- History chart that can be read on App without alarm clock
connection
- Set count down timer.
- Monitor the battery status of the BLE Alarm Clock and
have battery warning if it is at low level.
- Can stop alarm via App
- Wall mounting or desk stand
Before you start using it
• Please make sure to read the instruction manual carefully.
• Following and respecting the instructions in your manual
will prevent damage to your instrument and loss of your
statutory rights arising from defects due to incorrect use.
• We shall not be liable for any damage occurring as a
result of non-following of these instructions. Likewise, we
take no responsibility for any incorrect readings and for
any consequences which may result from them.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future reference.
Getting started
1. Install battery
1.1 Open the battery compartment.
1.2 Insert 2 x AA batteries in polarity (+) and
(-) as indicated.
1.3 Close the battery compartment.
PAIR
1.5V''AA''
SCROLL RESET
1.5V''AA''
2. Install BleAlarm App on your device.
2.1 Access App Store and Google play search
for BleAlarm
BLE
ALARM
2.2 Select and install BleAlarm App on your
mobile device.
Pairing the BLE Alarm Clock
3.
Pair the BLE Alarm Clock with BleAlarm app.
3.1 Before running the BleAlarm app, make sure the
Bluetooth is turned ON at your device.
3.2 After you tap the app icon
, the ‘Nearby Devices’
screen appears. You need to pair the BLE Alarm Clock
device before you enter the main app screen.
BLE
ALARM
Pairing the BLE Alarm Clock
BLE Alarm Clock
3.5 The new BLE Alarm Clock
will be displayed on App
and is ready for pairing. Tap
the "BLE Alarm Clock" will
start the pairing and
3.4 Press and hold the [PAIR]
connection process. Once
button on the BLE Alarm
Clock device for 5 seconds. the BLE Alarm Clock is
paired, it will start time and
You can find that the
icon start to blink.
data synchronization.
3.3 Tap “ Pair New Device”
to search for nearby
devices.
Pairing the BLE Alarm Clock
3.6 After the connection is made, the following information
will be synchronized:
i) Current time and date
ii) Alarms & timer setting
iii) Unit battery level
iv) Temperature and Humidity history
Pairing the BLE Alarm Clock
3.7 When the BLE Alarm Clock is paired with one device,
other devices cannot pair with it again.
3.8 One device can pair with maximum 5 BLE Alarm
clocks.
3.9 Bluetooth icon status description
No Bluetooth
connection
Bluetooth under
connection
Bluetooth connected
successfully
Rename the BLE Alarm Clock
4.
Rename the device.
Tap the device name (default is “BLE Alarm Clock”) at
the top of the screen to edit the device name.
Battery status indicator
5. Battery status indicator
It indicates the battery level of your BLE Alarm Clock
device. While the battery level drops below 20%, the
battery icon is in red status and a low battery warning
will pop up for to remind battery replacement.
Meanwhile, low battery indicator icon will shown on the
alarm clock LCD.
Above 60%
Between
20% ~ 60%
Warning
Below 20%
BLE Alarm clock:Battery level very low!
Please replace device batteries.
Setting the alarm time
6.
Setting the alarm time
6.1 Each BLE Alarm Clock can set up maximum 5 Alams.
On the main screen. Tap individual alarm e.g. Alarm1 to
enter the alarm setting page
Alarm 1
6.2 The alarm setting screen appears. You can edit and
adjust different items on this screen, which include:
i) Alarm Name: Tap alarm 1- 5 to edit your preferred
name to this alarm.
ii) Time: Tap to adjust the time for this alarm.
iii) Day of Week: Tap to select which day of week to enable
the alarm.
- If none is selected, it will be as a once alarm.
- If all days are selected, it will be as a daily alarm.
iv) Sound pattern: Tap to select which tone pattern (5
patterns plus one random pattern available) is applied
to this alarm.
Setting the alarm time
v)
Alarm volume level: Tap to select the alarm sound
volume level (three options: Low, Med and High).
6.3 Complete the alarm setting.
i)
ii)
Tap [Done] to save the alarm setting and turn on the
alarm.
At the main screen,user can turn the alarm on / off by
scrolling the
right and left
On
Off
6.4 Stop the alarm via app.
i) When the alarm clock is alarming, you can enter the
alarm by tapping the notification on device.
ii) There is an “ ” icon at the right hand side of the row.
You can tap the “
” icon to stop the alarm.
Snooze operation
7. Using the SNOOZE function
7.1 When the alarm sounds,
press the [Snooze] button
to get an extra 5 minutes
of sleep. The snooze will
repeat up to three times.
7.2 The above default value is
set by the factory. User can
set the “Maximum Snooze”
and “Snooze Duration” in
the preference screen.
To turn off the alarm
8.
To disable the alarm
8.1 When the alarm sounds,
press the [Snooze] button
once or press [Alarm] to
disable the alarm.
8.2 The alarm will sound for
1 minute and stop
automatically. If Snooze
Enabled setting is ON,
the alarm will repeat
every 5 minutes. You can
press the [Snooze] button
to interrupt the alarm
momentarily, or can press
[Alarm] button to turn off
the alarm and stop the
snooze function completely.
8.3 User can tap the alarm
time to disable the alarm
completely ( Please
make sure your app is
paired with the device)
Setting the Timer
9.
To set the timer
Tap timer of main screen and go into timer screen.
9.1 You can edit and adjust items below on this screen.
i)
Timer period:
Scroll to adjust the timer period.
Sound pattern:
Tap to select the tone pattern (5 patterns plus one
random pattern available).
iii) Sound volume level:
Tap to select the sound volume level (three options:
Low, Med and High).
ii)
Setting the timer
9.2 Using the Timer
In the Home screen, you can tap “Start” under Timer to
start counting.
Then you can tap “Stop” to stop the current timer and
“Start” to re-continue the timer again. The timer can be
reset by tapping the [Reset].
Delete the BLE Alarm Clock record
10. Delete the BLE Alarm Clock record.
BLE Alarm Clock
You can tap the
at
Nearby Devices screen to
Alarm Clock
enter the Known Devices
page. By tapping “Edit” and
then the
, you can select
“Delete” to delete the BLE
Alarm Clock record on the
current device.
Preference
11) Preference setting
Tap the
to enter the Preference screen. You can
edit and adjust the following items on this screen.
11.1 Snooze Enabled: Tap to select ON/OFF to enable
/disable the Snooze function. If 'Snooze Enabled is
ON, you will have two more options, which are:
Maximum Snoozes:The maximum number of times to
repeat the snooze function, which can be set to
Unlimited or values from 1 to 9.
Snooze Duration: The time interval between snooze
function, which can be set to values from 1 to 15
minutes.
Preference
11.2 Alarm Sound Duration: The alarm duration, which
can be set to values from 1 to 15 minutes.
11.3 Auto DST update: It will adjust Daylight Saving Time
(DST) automatically based on your device time zone
setting. The alarm clock will be automatically one hour
ahead of Standard Time in summer time and will be
back to the normal Standard Time when back to winter
time, according to your device’s time zone.
11.4 Scroll Display: Turn on to enable the LCD screen
switch automatically (screen detail please refer to
point 14)
11.5 Temperature: Select ˚C or ˚F
11.6 Time Format: Select 12 or 24 hour format
11.7 Date Format: Select MM / DD or DD/ MM
day format.
Reset the BLE Alarm Clock
12. Reset the BLE Alarm Clock
1) Pull down flip over stand to access battery compartment
2) Insert stand into the back case
BLE Alarm Clock
If the BLE Alarm Clock is not
working properly, try to press
RESET button to resume default
setting. The LED flashes twice
in (purple) color, then the LED
will flash once per 6 seconds in
red color.
After reset, all data in the BLE
Alarm Clock is deleted. Press
and hold the [PAIR] button again
to re-pair the BLE Alarm Clock.
If it has been paired previously
with the same device, you can
select “Restore” to resume all
setting and data or select
“Erase” to start all from scratch.
Temperature
Relative
Reset
the BLEand
Alarm
ClockHumidity
13. Current Temperature and Relative Humidity
(Conditions)
13.1 The unit can measure temperature and relative
humidity. The current temperature and humidity
reading will be shown on the App or you can browse it
on the BLE Alarm Clock LCD screen by pressing the
“Scroll” button.
Temperature
Relative
Reset
the BLEand
Alarm
ClockHumidity
13.2 The unit can accumulate temperature / humidity
reading up to 7 days. To read the data tap the
conditions then go into the historical chart showing
temperature / relative humidity reading by time and
date, including the maximum and minimum record of
each day. Number of historical record stored in app
can more than 7 days depends on your idevice
memory.
Note:
(Reset the unit will clear all memory stored in the unit
and the record in app after synchronization.
3:25 PM
3:25 PM
Temperature
Relative
Reset
the BLEand
Alarm
ClockHumidity
13.3 Reading history chart without alarm clock connection
At the Nearby Devices page, you can tap the history
chart icon at the right hand side of the row to go to the
history chart page.
Scrollthefunction
Reset
BLE Alarm C
14. You can press the [Scroll] button on the BLE Alarm
Clock to switch between different information manually.
Or you can press and hold the [Scroll] button to
enable/disable auto-scrolling display function.
14.1 The scrolling display will be in following order:
“Clock with calendar mode”
”Calendar Mode”
Scroll function
“Temperature and humidity with clock mode”
”Clock with alarm time mode”
(show if any alarm enabled)
TIMER mode
(only if the timer is running)
14.2 In auto-scrolling mode, each mode will stay
3 seconds and then switch to next display.
BLE Alarm Clock
unit
buzzer
space
Manufacturer reserves the right to update the contents
of this manual and App.
Disposal of Your Old Product
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused. When
this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of your
old products with your normal household waste. The correct disposal
of your old product will help prevent potential negative consequences
for the environment and human health.
Disposal of Flat Batteries / Accumulators
You, as the end user, are legally obliged (Battery Ordinance)
to return all flat batteries and rechargeable batteries.
Disposal in the household waste is prohibited.
“European Directive 2006/66/EC” Batteries, including
rechargeable batteries, which contain hazardous substances
are marked by symbols which indicate the prohibition of
disposal in the household waste.
The designations for the heavy metals concerned
are as follows:
Cd = cadmium, Hg = mercury, Pd = lead. You can return flat
batteries / rechargeable batteries free of charge to the
collection points in your community or anywhere where
batteries / rechargeable batteries are sold.
You thus fulfil your statutory obligations and help protect the
environment.
Caution
Replace only with the same or equivalent type of battery, please refer
to the engraved battery marks inside the battery compartment for the
correct battery polarity (+) and (-). Danger of explosion is possible if
battery is incorrectly replaced.
This product complies with the requirement of the 1999/5/EC directive.
Use this unit and mobile phone only in environments with ambient
temperatures between 0°C and 70°C.
The maximum operating temperature of the unit is 70°C
018-140077
BAC

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : A600_IOSandAn
Metadata Date                   : 2015:04:23 17:31:56+08:00
Modify Date                     : 2015:04:23 17:31:56+08:00
Create Date                     : 2015:04:23 17:31:56+08:00
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Thumbnail Width                 : 40
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 2983 bytes, use -b option to extract)
Instance ID                     : uuid:eeda4d27-51db-b345-baa4-6df52fe42e7e
Document ID                     : xmp.did:0580117407206811822AAA151CB03277
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : uuid:780c0773-4fc1-b441-b211-e9339d6ca8b5
Derived From Document ID        : xmp.did:FA7F11740720681183D1D8CC31FF4634
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:0180117407206811822A96B98931BEA9, xmp.iid:0580117407206811822AAA151CB03277
History When                    : 2013:07:17 11:48:48+08:00, 2015:04:23 17:31:47+08:00
History Software Agent          : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/admin/Public/NOK/manual/A600/offline.psd, /Users/admin/Public/NOK/manual/964F/App screen/964F_add_alarm.psd, /Users/admin/Public/NOK/Product and Dummy Photos/A600/IMG_1176.psd, /Users/admin/Public/NOK/Product and Dummy Photos/A600/IMG_1176.psd, /Users/admin/Public/NOK/manual/A440/A440/photo.PNG, /Users/admin/Public/NOK/manual/A440/A440/photo.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0168.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0169.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0166.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0167.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0274.PNG, /Users/admin/Public/NOK/manual/964F/App screen/964F_stop_alarm_icon.png, /Users/admin/Public/NOK/manual/964F/App screen/964F_stop_alarm_icon.png, /Users/admin/Public/NOK/manual/A600/offline.psd, /Users/admin/Public/NOK/manual/964F/App screen/964F_add_alarm.psd, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0171.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0164.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0149.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0150.PNG, stock-photo-6124171-press-the-button.jpg, /Users/admin/Public/NOK/manual/A480/App photos/photo 2.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0160.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0170.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0148.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0163.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0162.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0162.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0162.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0170.PNG, stock-photo-6124171-press-the-button.jpg, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0160.PNG, stock-photo-6124171-press-the-button.jpg, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0160.PNG, /Users/admin/Public/NOK/manual/A480/App photos/photo 1-1.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0155.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0166.PNG, /Users/admin/Public/NOK/manual/964F/App screen/IMG_0156.PNG, /Users/admin/Public/NOK/manual/A480/App photos/photo 5.PNG
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 58.998638
Max Page Size H                 : 90.000708
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, HelveticaNeue-UltraLight, MyriadPro-Regular
Font Family                     : Arial, Arial, Helvetica Neue, Myriad Pro
Font Face                       : Regular, Bold, UltraLight, Regular
Font Type                       : Open Type, Open Type, TrueType, Open Type
Font Version                    : Version 5.01.2x, Version 5.01.2x, 10.0d36e1, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, HelveticaNeue.dfont, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Trapped                         : False
GTS PDFX Version                : PDF/X-4
Page Count                      : 28
Creator                         : Adobe Illustrator CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools