Electronics ES ES Enrollment Station User Manual manual

International Electronics Inc. ES Enrollment Station manual

manual

Download: Electronics ES ES Enrollment Station User Manual manual
Mirror Download [FCC.gov]Electronics ES ES Enrollment Station User Manual manual
Document ID560636
Application IDGa5BlQSUHyJ/IIjcbvvOkg==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.24kB (227978 bits)
Date Submitted2005-07-11 00:00:00
Date Available2005-07-14 00:00:00
Creation Date2005-05-23 09:48:33
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2005-05-23 09:48:33
Document TitleMicrosoft Word - LIT_6045680_1_D1b_Prox-Enrollment-Station.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Patrick Kearney

Enrollment Station Installation Instructions
Specifications
Mechanical:
2.74” W x 4.6” L x 1.4” H
Electrical:
Operating Voltage: 12 VDC
Current Draw: 20mA
Environmental:
Environment: For indoor use only.
Temperature Tolerance: -20º to 130º F
Description
The Enrollment Station is used to enroll HID format proximity cards directly into the PC software by
presentation. This provides a convenient way to enroll cards whether you know the card format or
not. The raw card data is read from the card and then stored in the PC software.
Packing List
1 Enrollment Station
1 Installation Instructions
1 12VDC, 300mA Transformer
1 6-foot straight cord
1 DB-9 Serial Connector
1 DB-25 Serial Connector
Operation
To operate the Enrollment Station simply connect power and connect it to your PC as shown in the
diagrams in the following sections. Once it’s connected to your PC you are now ready to enroll your
cards. To enroll cards, present them over the labeled area on the top of the unit. When a card is
successfully read, the Enrollment Stations responds with an audible beep.
15.21 Information to User
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
Document # 6055680 Rev 1.0, D1b
Connecting the Transformer to the Enrollment Station
The Enrollment Station is shipped with a 12VDC, 300mA plug-in transformer. To power the unit just
plug the connector from the transformer into the power jack on the Enrollment Station. Then plug the
transformer into a 120VAC wall outlet.
Document # 6055680 Rev 1.0, D1b
Connecting the Enrollment Station to a PC COM port:
To connect the Enrollment Station to your PC COM port, first plug the 6-foot straight cord into the RJ11 jack on the front. Then plug the straight cord into the DB connector. Next connect the DB
connector to your COM port. You can use either the DB-9 or DB-25 connector, depending on your
COM port. The diagram below shows this connection.
Document # 6055680 Rev 1.0, D1b
427 Turnpike Street
Canton, MA 02021 U.S.A.
www.ieib.com
Document # 6055680 Rev 1.0, D1b

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e9061cfb-2490-46f4-9803-cf454f8e2d7a
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2005:05:23 09:48:33-04:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:05:23 09:48:33-04:00
Document ID                     : uuid:e0283aa0-e78a-47f9-98df-9e38a533ebe8
Format                          : application/pdf
Title                           : Microsoft Word - LIT_6045680_1_D1b_Prox-Enrollment-Station.doc
Creator                         : Patrick Kearney
Author                          : Patrick Kearney
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PHUES

Navigation menu