Electronics ESU ESU Enrollment Station User Manual LIT 6045680 2 D2c Prox Enrollment Station

International Electronics Inc. ESU Enrollment Station LIT 6045680 2 D2c Prox Enrollment Station

Users Manual

FCC Statement15.21 Information to UserAny changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Access System – Proximity CardEnrollment Station Installation InstructionsSpecifications/Requirements:Mechanical: Card Compatibility2.74” W x 4.6” L x 1.4” H HID Format, 125 KHZ Cards Only (up to 40 bits)Environmental: Software:Environment: For indoor use only Hub Manager Professional 6 (or higher) – Serial COM Port onlyTemperature Tolerance: 32º F to 120º F (0º – 49ºC) Hub Manager Professional version 7.1.3 (or higher) – USB or Serial COM PortElectrical: PC Connections:Operating Voltage: 12 VDC USB Port (v1.1 or v2.0) or serial COM portCurrent Draw: 38mADescriptionThe Enrollment Station is used to enroll HID format proximity cards (up to 40 bits) directly into the Hub Manager ProfessionalAccess Control PC software, by presentation. This provides a convenient way to enroll cards whether you know the weigand cardformat or not. The raw card data is read from the card and then stored in the Hub Manager Professional database.Software CompatibilityThe Enrollment Station is compatible with Hub Manager Professional 6 (or higher) when using with a serial COM Port. Hub ManagerProfessional version 7.1.3 (or higher) supports both a USB and serial COM port connection. To use the Enrollment Station with aUSB port you must install the USB drivers, which is discussed later on in this manual.If you do not have the latest software you can download the latest version at www.ieib.com or update your existing software throughiUpdate (version 7.1.1.15 or higher contains the drivers).Packing List(1) Enrollment Station(1) Installation Instructions(1) 12VDC, 300mA Transformer(1) USB Cable(1) COM Port Connection Kit (DB9, DB25 and 6-Foot Cord)Document # 6045680 Rev. 2.0, D2c Page 1 of 10
Enrollment Station Installation Instructions OperationTo operate the Enrollment Station simply connect power and connect it to your PC as shown in the diagrams in the following sections.Once it’s connected to your PC you are now ready to enroll your cards using the Hub Manager Professional PC software. Please referthe Hub Manager Professional documentation for further details regarding software operation. When data is transmitting between thePC and the Enrollment station the yellow and green transmit and receive LED's blink rapidly.Connecting the Transformer to the Enrollment StationThe Enrollment Station is shipped with a 12VDC, 300mA plug-in transformer. To power the unit just plug the connector from thetransformer into the power jack on the Enrollment Station. Then plug the transformer into a 120VAC wall outlet. If the unit ispowered properly the red LED at the top turns on solid.Page 2 of 10 Document # 6045680 Rev. 2.0, D2cFigure 1: Connecting the Transformer to the Enrollment Station
Enrollment Station Installation InstructionsConnecting the Enrollment Station to a PC USB port:To connect the Enrollment Station to your PC USB port, first plug the small end (Type Mini-B) of the 6-foot USB cable into USBconnector on the front. Then plug the large end (Type A) of the 6-foot USB cable into your PC's USB port. Figure 2 below shows thisconnection.Document # 6045680 Rev. 2.0, D2c Page 3 of 10Figure 2: Connecting the Enrollment Station toa PC USB port
Enrollment Station Installation Instructions Connecting the Enrollment Station to a PC COM port:To connect the Enrollment Station to your PC COM port, first plug the 6-foot straight cord into the RJ-11 jack on the front. Then plugthe straight cord into the DB connector. Next, connect the DB connector to your COM port. You can use either the DB-9 or DB-25connector, depending on your COM port. Figure 3 below shows this connection.Page 4 of 10 Document # 6045680 Rev. 2.0, D2cFigure 3: Connecting the Enrollment Station toa PC COM port
Enrollment Station Installation InstructionsInstalling the USB DriversTo use the Enrollment Station you must install the USB drivers on the PC. The Enrollment Station is plug and play, so when you plugit in, your PC should recognize the new hardware and launch the Found New Hardware Wizard as shown below. Please note that thishardware wizard runs twice. Follow the same steps both times. Note: These instructions are for a typical Windows XP system. Ifyou are using a different operating system, or these steps do not match your PC, please refer to the instructions for your system.On the first screen of the wizard select “No, not this time.” then click the Next button.After clicking the Next button, choose the option that says “Install from a list or specific location (Advanced)” and click the Nextbutton.Document # 6045680 Rev. 2.0, D2c Page 5 of 10
Enrollment Station Installation Instructions On the next screen select “Search for the best driver in these locations.” at the top. If you've already installed Hub ManagerProfessional onto the PC, select “Include this location in the search” and browse to the following path: C:\Program Files\IEI\HubManagerPro7\Program\Utilities\USB_Driver\FTDI_XP-2K-2003If you haven't installed Hub Manager Professional, the USB drivers are also located on the CD. Choose the option “Search removablemedia (floppy, CD-ROM...).” For reference, the USB drivers are located in the following folder on the CD:E:\Driver_USB\FTDI_XP-2K-2003. (Note: This folder path is an example; Your CD drive letter may not be E.) Click Next tocontinue.Page 6 of 10 Document # 6045680 Rev. 2.0, D2cNote: The path above is for Hub Manager Professional 7. If you are using a differentversion, browse to the folder for that version. For example: HubManagerPro8.
Enrollment Station Installation InstructionsNext a screen appears indicating the files are being copied, then you're presented with the following screen to indicate the process isfinished. Click on the Finish button to close the Found New Hardware Wizard. Please note that this hardware wizard runs twice.Follow the same steps both times.Document # 6045680 Rev. 2.0, D2c Page 7 of 10Note: The second time through the Found New Hardware Wizard, thefinal screen indicates the wizard has completed installing the softwarefor: USB Serial Port.
Enrollment Station Installation Instructions Determining the USB COM port numberWhen you connect the Enrollment Station to your computer's USB port, the PC automatically assigns it a COM port number. Youmust then select this COM port in the software to communicate to your Enrollment Station. Follow the instructions below todetermine the USB COM port number and refer to the Hub Manager Professional documentation for details about selecting the COMport in the software. Note: These instructions are for a typical Windows XP system. If you are using a different operating system, orthese steps do not match your PC, please refer to the instructions for your system.1. Right click on the My Computer icon on your desktop and select properties from the drop down list.2. When the System Properties screen opens select the Hardware tab, then click on the Device Manager button.Page 8 of 10 Document # 6045680 Rev. 2.0, D2cNote: If you do not have the My Computer icon on your desktop, you can access the SystemProperties by going to Control Panel. Click on the Windows Start Menu and choose Settings,then Control Panel. When the Control Panel menu opens, scroll down to System. Double-click onSystem to open. Follow the rest of the instructions in this section.
Enrollment Station Installation Instructions3. When the device manager list opens, expand Ports (COM & LPT) by clicking the + symbol. Under this is a list of the COMports on your PC. Look for USB Serial Port (COMx) in the list. The COM port is shown to the right. The example belowshows the Enrollment Station is assigned to COM4.Note: If you are unsure of which device it is, unplug the USB cable and the screen will refresh. Take note of which devicesare in the list. Then plug the cable back in and notice which device re-appears in the list.Document # 6045680 Rev. 2.0, D2c Page 9 of 10Important Note:If you unplug the Enrollment Station from the USB port and plug it into a different physical port on thePC or on a USB Hub, the COM port number may change. If you do change USB ports, you must verifythe COM port number, using the instructions above, prior to enrolling users through the software.
Enrollment Station Installation Instructions Page 10 of 10 Document # 6045680 Rev. 2.0, D2cInternational Electronics, Inc.427 Turnpike St.Canton, MA 02021 U.S.A.Phone: 800-343-9502, 781-821-5566 Fax: 781-821-4443Website: www.ieib.com

Navigation menu