Elster Solutions RX9A AUTOMATIC METER READING SYSTEM TRANSCEIVER User Manual

Elster Solutions, LLC AUTOMATIC METER READING SYSTEM TRANSCEIVER IL42 4026

a href="https://usermanual.wiki/Elster-Solutions" itemprop="url"> Elster Solutions >

Contents

Installation Instructions

August 2005 IL42-4026DElster Electricity, LLCRaleigh, North Carolina USA+1 800 338 5251 (US Technical Support)+1 800 257 9754 (US Sales Support)+1 919 212 4800 (US Main)+1 905 634 4895 (Canada Main)support@us.elster.comwww.elsterelectricity.comREX™ Meter Installation InstructionsGeneralThis leaflet contains installation instructions for the REX residential electronic watthour meter with the following form factors:■self-contained: Forms 1S, 2S, and 12S■transformer-rated: Forms 3S and 4SAll meters are calibrated and sealed before shipment. For proper installation, accuracy, and maximum life of the meters, use the following procedures.WARNING!Use authorized utility procedures to install and service metering equipment. Dangerous voltages are present. Equipment damage, personal injury, or death can result if safety procedures are not followed.WARNING!When using the REX meter with the internal service control switch, follow authorized utility procedures to reconnect electrical service. Property damage, personal injury, or death can result if safety precautions are not followed.Installing the REX Meter1. Make sure the meter to be installed matches service type (that is, form), current class, capacity required, and service socket.2. Check the socket and verify that the wiring is correct. See “Internal Wiring Diagrams” on page 2 and “Installation Wiring Diagrams” on page 3 for all wiring diagrams.3. Make sure that the voltage disconnect or test link on the back of the meter is closed, if installed.4. Line up the meter blades to the socket jaws and rock the meter into place. Make sure that the meter is in the upright position.5. Make sure the LCD turns on and the energy use indicator flashes if load is present.If load is applied, check that the pulse arrows on the LCD are blinking. The LCD has two pulse arrows. The arrow pointing to the left indicates energy received; the arrow pointing to the right indicates energy delivered. For more information, see the technical manual for your meter.6. Apply all seals and record any necessary information.IL42-4026D
Download:
Mirror Download [FCC.gov]
Document ID765455
Application ID8YmszqV+WdDJqQSvFIL95A==
Document DescriptionInstallation Instructions
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.16kB (89490 bits)
Date Submitted2007-03-07 00:00:00
Date Available2007-03-07 00:00:00
Creation Date2003-12-16 10:51:29
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2005-08-31 10:55:24
Document TitleIL42-4026.fm
Document CreatorFrameMaker 7.1
Document Author: PAK
FCC ID Filing: QZC-RX9A

Navigation menu