Emanate Wireless PPT-200 Emanate PowerPath Tag User Manual PPT 200 Tag Quick Start Guide 0 1

Emanate Wireless, Inc Emanate PowerPath Tag PPT 200 Tag Quick Start Guide 0 1

User manual

Emanate PowerPath Tag PPT200 Quick Start Guide Doc#PPT-001 R1.0 Draft 0.1 Software Documentation This Cover Sheet For In-House Use Only, NOT FOR DISTRIBUTION. Distribution Begins Next Page. Document Number: PPT200-001 R1.0 Product Release: 1.0 Draft: 0.1 Technology: Emanate PPT200 Title: Emanate PowerPath Tag PPT200Quick Start Guide Originator: Neil Diener Technical Contributors: Neil Diener, Chandra Vaidyanathan, Yohannes Tesfai Tech Writer / Editor: Summary: Current Status: First Draft Final Approval By: Final Approval Date: Release Date: Detailed RevisionHistory Draft Revision Date Reason Approval(s) 0.1 1/2015 Written by Neil Diener Copyright 2015Emanate Wireless, Inc. Emanate Wireless, Inc., 11145 Windsor Rd, Ijamsville, MD 21754 NOTICE OF PROPRIETARY INFORMATION Information contained herein is of a highly sensitive nature and is confidential and proprietary to Emanate Wireless, Inc. (Emanate). It shall not be distributed, reproduced or disclosed orally or in written form, in whole or in part, to any party other than the direct recipients without the express written consent of Emanate.Multiple Patents Pending
E EmanTeEmanate Wirenate PowerPlephone: 84Copyrightless, the EmaPath Tag PP Ema11Ijam44-EMANATt © 2015, Emaanate Logo, an PT200 Quick anate Wirele145 Windsmsville, MDTE Email: anate Wirelesnd PowerPath k Start GuideDocEmanDocess, Inc. sor Rd. D 21754 info@emas, Inc. All RigTag are tradeeDoc#PPT-0Producumennate PowPPTDate: Febcument Numbeanatewirelesghts Reservedemarks of Ema001 R1.0 Drauct ntation werPathT-200 ruary 2, 2015 er: PPT200-00 ss.com . anate Wirelesaft 0.1 n hTM Tag1 R1.0 s, Inc.
Emanate PowerPath Tag PPT200 Quick Start GuideDoc#PPT-001 R1.0 Draft 0.1 Emanate PowerPathTM Tag PPT-200 Quick Start Guide
Emanate PowerPath Tag PPT200 Quick Start GuideDoc#PPT-001 R1.0 Draft 0.1 Table of Contents 1Introduction ........................................................................................................................... 11.1The PowerPath Tag ........................................................................................................ 11.2Additional Documentation ............................................................................................. 11.3Parts ................................................................................................................................ 11.4Important Notices ........................................................................................................... 12Overview of the Installation Process ................................................................................... 23Activating the Tag ................................................................................................................. 33.1Unpacking ...................................................................................................................... 33.2Pressing the Button ........................................................................................................ 33.3Connecting the iPhone App ........................................................................................... 43.4Configuring Network Parameters with the App ............................................................. 54Connecting The Tag .............................................................................................................. 74.1Connecting Tag Cable to Device ................................................................................... 74.2Tag Mounting Options ................................................................................................... 84.3Connecting to AC Power ............................................................................................... 85Safety Compliance Notice .................................................................................................... 96CERTIFICATIONS .............................................................................................................. 97Emanate Legal Notifications ................................................................................................ 1
Page 1 Emanate PowerPath Tag PPT200 Quick Start GuideDoc#PPT-001 R1.0 Draft 0.1 1 INTRODUCTION 1.1 The PowerPath Tag ThePowerPath Tag incorporates both hardware and software that provide the ability to track location and usage state of AC powered assets. PowerPath Tagsare used as part of advanced RTLS technology that can contribute to optimum usage of assets in a facility. This Quick Start Guide contains instructions for installing your PowerPath Tag, connecting your Tags to your asset, and for initially configuring the tags. 1.2 Additional Documentation This Quick Start Guide contains basic information for physically installing PowerPath Tags. PowerPath Tags can be used in a variety of different RTLS systems, some of which may require special software configuration as well. Please see any additional documentation which accompanies your product for further information. 1.3 Parts Before you begin installation, make sure you have the following parts on hand: PartCommentPowerPathTag Supplied by VendorC13PowerCable NotsuppliedbyVendorQuick Start GuideSupplied by VendorAdditional documentation and softwareYour RTLS Vendor may supply additional documentation and software in support of this productFormountedinstallationsyoumayalsoneedthefollowingitems:Tie-wraps Not supplied by Vendor Double sided tape Not supplied by Vendor 1.4 Important Notices • The Model PPT-200 Tagcontains 802.11 and Bluetooth Low Energy transmitting devices, and must be installed in a manor which provides at least 20 cm (7.8 inches) of separation distance from all persons.• Obtaining the Latest Software Version: You can use the Emanate Tag Management server to upgrade your tags with the latest firmware.
Page 2 Emanate PowerPath Tag PPT200 Quick Start GuideDoc#PPT-001 R1.0 Draft 0.1 2 OVERVIEW OF THE INSTALLATION PROCESS There are three overall stages to the installation process: 1. Initial Activation: In order for the tag to communicate with the Wi-Fi network and the PowerPath server, basic network access parameters must be configured into the tag. This configuration is done with the PowerPath Tag iPhone App. See Section 3 for more information. 2. Physical Connection: The tag must then be physically connected to the device to be tracked. See Section 4 for more information. 3. Additional Software Configuration: Once activated and connected to the device, additional configuration is done from the PowerPath Server. See the documentation accompanying the PowerPath Server for more information.
3 This 3.1 Care3.2 TheTstateInorThisOnceactivEmanaACTIVATINsection contUnpacfullyunpackPressTagshipswe.rdertoconfiisdonebypeyoupushtvefor30minate PowerPaNG THE TAtains discussicking ktheTagfroing the Bwiththebatteigurethetagpushingthethebutton,tnutes.ath Tag PPTAG ion of the steomthebox.Button erychargedgfromtheiPbuttonontthetagwakeT200 Quick S eps to initialld,butwiththPhoneapplithetopofthesup,andthStart Guidely activate a thehardwarecation,youetag.heBluetoothDoc#PPT-00tag using theeandradiosmustfirstwhLowEnerg01 R1.0 Drafe iPhone appsinadeepswakeupthetgyradiobecPage 3 ft 0.1 p. leeptag.omes
rund2hou3.3 YousApplOnceactivEmanaIftheSdown.Inthurs.Conneshouldseetlicationisnoeyouhavesvation.Seleate PowerPaStatusLEDdatcase,youecting ththePowerPaotinstalledotartedtheAectthedesirath Tag PPTdoesnotflasshouldfirsthe iPhoneathiPhoneAonyourphoApp,youwilredtagfromT200 Quick S shafterprestchargeupte App Appicononone,firstinslbepresentmthelist.Start GuidessingthebuthetagbypyourphonetallitusingtedwithalisDoc#PPT-00tton,thebatluggingitine.IfthePowtheAppleAstoftagstha01 R1.0 DraftterymayhantoanACouwerPathiPhAppStore.atarereadyPage 4 ft 0.1 avebeenutletforhoneyfor
3.4 AftertogoThenThes‐‐‐‐OnceyouwEmanaConfigryouhavesototheActivnextscreenseparamete ServerN WiFiSSI Passwor Customeeyouhavefiwillseetheate PowerPaguring NselectedadevationparamwillallowyersarethefoName:DNSD: SSIDrd: WPAerID: Uniqilledinthepmessagebeath Tag PPTetwork Pevice,adevimeterscreeyoutoenterollowing:nameorIPDoftheWiFiA2‐PSKpassqueIDforcuparameters,elow.T200 Quick S Parametecedetailscrn.ActivationpaddressoftinetworkphraseforWustomer(asstaptheActiStart Guideers with reenwillappparameterstheEmanateWiFinetworsignedbyEmivatebuttonDoc#PPT-00the Apppear.TaptfortheTag.eServerrkmanate)n.Onceactiv01 R1.0 DraftheConfigur.vationiscomPage 5 ft 0.1 rebuttonmplete,
Emanaate PowerPaath Tag PPTT200 Quick S Start GuideDoc#PPT-0001 R1.0 DrafPage 6 ft 0.1
4 This 4.1 an IE(Maldevicotherdisin 1. IEmanaCONNECTsection contConneYour DEC60320 C13e) connectorThe PPces which reqWarnir equipment, nfected and dInsert the Tagate PowerPaTING THE Ttains discussiecting TaDevice Must3 (Female) cr. PT-200 is raquire rating oing. To avomake sure thdecontaminatg’s C13 cablath Tag PPTTAG ion of the steag Cablet have a IECcable, and canated for 15Aof more thanid contaminahat equipmented. le into the C1T200 Quick S eps to physice to DevicC60320 C14 n only work A operation. n 15A. ating or infecnt which has14 connectorStart Guidecally attach thce (Male) Conwith devices The PPT-20cting personns been used br on the devicDoc#PPT-00he tag to the nnector: Thes that have a 00 cannot be nel, the servibefore has bece to be track01 R1.0 Drafdevice to bee tag is desigIEC60320 C used with anice environmeen appropria ked. Page 7 ft 0.1 e tracked.gned with C14 ny ment, or ately
4.2 Do ncond1. Mt2. Os4.3 devicwith whicof thepersoC13 intoaSUPPAftercord EmanaTag MMoistunot mount thedensation, or MountingOptie‐wraps,feOption 2: Msecure. ConneThe PPces which reqProtecan internal ph means thate room bywaonnel, when 3-wire cablean appropriatPLY. rtheTagissintothetagate PowerPaMounting ure:The tag ie tag in a plaother signifiption1:Moeedingthewount the tag ecting toPT-200 is raquiresmax cucting againstpower sourcet it isan instruay of groundoperating froewhich grounte 3-wire recesecurelymoginordertoath Tag PPTOptionsis rated for IPce where it wcant volumeuntthetagtwrapsthrougwith strong o AC Powated for 15Aurrent of mort Electric Sheaccording toument includding contacts om an AC sonds the tag toeptacle. DOounted,connopowertheT200 Quick S s P-52, which will be subjece of moisturetoapoleorghthebelt‐lsticky tape ower A operation. re than 15A.hock. The Po IEC 60601ded in the prin the poweource, tag muo the power lO NOT OPERnectastandtrackeddevStart Guideis protected ct to dripping. othernarroloopopeningor other adhe The PPT-2. PPT-200 is cl-1/EN 60601otective grour plug.To proust be groundline ground (RATE THE PardIEC6032vice.Doc#PPT-00from moistug liquid, spilowobjectongsontheboesive, making00 cannot belassified as C1-1/CSAC22unding (proteotect the patided. You mu(protective eaPPT-200 ON203‐wireC 01 R1.0 Drafure up to a dallage, excessnthedeviceottomoftheg sure the tage used with aClass I Equip2.2 601.1/ULective earth)ient and hospust use an apparth) when pN A 2-WIRE 13(female)Page 8 ft 0.1 amp wipe. ive usingtag. g is any pment L 2601-1, system pital propriate lugged AC power
Page 9 Emanate PowerPath Tag PPT200 Quick Start GuideDoc#PPT-001 R1.0 Draft 0.1 5 SAFETY COMPLIANCE NOTICE This device has been tested and certified according to the following safety standards and is intended for use only in InformationTechnology Equipment which has been tested and certified to these or other equivalent standards: • UL Standard 60950-1 / CSA C22.2 No. 60950-1-03 • EN 60950-1 • UL Standard 60601-1 • EN 60601-1 This device is approved for indoor use only. The PPT-200 is rated for 15A operation. The PPT-200 cannot be used with any devices which require rating of more than 15A. Service: There are no user serviceable parts inside the Tag. Please refer all repair operations to a qualified service center. 6 CERTIFICATIONS NOTE: FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The distance between user and products should be no less than 20cm
Page 9 Emanate PowerPath Tag PPT200 Quick Start GuideDoc#PPT-001 R1.0 Draft 0.1 7 EMANATE LEGAL NOTIFICATIONS COPYRIGHT & TRADEMARKS. Copyright © 2015. Emanate Wireless, Inc. All Rights Reserved. Emanate Wireless, the Emanate logo, and PowerPath Tagare trademarks of Emanate Wireless, Inc. All other trademarks and brand names are the property of their respective owners. LIMITED WARRANTY Emanate guarantees that the PowerPath Tag Model PPT-200 is free from physical defects in material and workmanship under normal use for one year from the date of purchase. If this product proves defective during this warranty period, contact Emanate Customer Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND SERIAL NUMBER FROM THE PRODUCT PACKAGING ON HAND. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization Number clearly on the outside of the package and include your original proof of purchase. IN NO EVENT SHALL EMANATE’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENATION. EMANATE DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Emanate makes no warranty or representation, expressed, implied or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Emanate reserves the right to revise or update its products, software or documentation without obligation to notify any individual or entity. ADDITIONAL NOTIFICATIONS The PowerPath Tag, Model PPT-200 product is subject to U.S. export controls when exporting outside the United States. You are responsible for ensuring compliance with these regulations. The EmanatePowerPath Tag, Model PPT-200 includes software embedded therein (“Embedded Software”) for use with the Emanate Tag Server. Your use of the Embedded Software and Server Software is subject to the End User License Agreement (EULA) included in this box. The Emanate PPT-200 tag is non-recyclable.

Navigation menu