Emerson EWR20V4 User Manual DVD/VCR Manuals And Guides L0903086

EMERSON DVD/VCR Combo Manual L0903086 EMERSON DVD/VCR Combo Owner's Manual, EMERSON DVD/VCR Combo installation guides

User Manual: Emerson EWR20V4 EWR20V4 EMERSON DVD/VCR - Manuals and Guides View the owners manual for your EMERSON DVD/VCR #EWR20V4. Home:Electronics Parts:Emerson Parts:Emerson DVD/VCR Manual

Open the PDF directly: View PDF .
Page Count: 108 [warning: Documents this large are best viewed by clicking the View PDF Link!]

C_vr_ er_s anual

EMERSON AND THE G CLEF LOGO ARE REGISTERED TRADEMARKS

OF EMERSON RADIO CORR PARSIPPANY NEW JERSEY U S A

EV R20V4

_NSTRUCCIONES EN ESPANOL ENCLUIDAS I

Supplied Accessory ............................................................... ....

•Remote control

(Nm08UD)

widl two AA batteries

- RF cable • Audio/Video cables - Owner's Manual •Quick Use Guide

(VVPZ090 ITM002) (WPZ0102TH0 ]5 or (0VMN0420 E) (I VMN20003)

WPZ0102LTE0 I)

If,you need additional operating assistance after reading this owner's manual or to

_ _ order replacement accessories, please call

..... ..... TOLL FREE :1,800,605,8457

.... or visit our web:site:at http:ilwwwlfunai,corp.com

Before you start

WARNING: TO REDUCETHE RISKOF FIREOR ELECTRIC SHOCK, DO NOT EXPOSETHIS APPLI-

ANCE TO RAIN OR MOISTURE.

CAUTION

CAUTION:

TO REDUCETHE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER

(OR BACK). NO USERSERVICEABLEPARTSINSIDE.REFERSERVICINGTO

QUALIFIED SERVICEPERSONNEL.

The lightning flash with arrowhead symbol, within an equilat-

eral triangle, is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's enclo-

sure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within an equilateral triangle is intend-

ed co alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USEOF CONTROLS ORADJUSTMENTS OR PERFORMANCEOF PROCEDURESOTHERTHAN THOSESPECIFIEDHEREIN

MAY RESULTIN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLEAND INVISIBLELASERRADIATION WHEN OPEN AND INTERLOCK DEFEATED.DO NOT STAREINTO BEAM.

LOCATION: INSIDE,NEARTHE DECK MECHANISM.

FCC WARNING-This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the instruc-

tion manual.The user could lose the authority to operate this equipment if an unauthorized change or modi-

fication is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installa-

tion.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by

one or more of the following measures:

I) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-O03.

Cet appareil numGrique de la classe B est conforme &la norme NNB-O03 du Canada.

CAUTION:TO PREVENT ELECTRIC SHOCK, HATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAHE LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU

FOND.

ANOTE ABOUT RECYCLING

This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recy-

cling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical

wastes.

Make your contribution to the environment!!!

•Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste.

Contact your council for details.

For Customer Use:

I Read carefully the information located at the back of this unit and enter below the Serial No.Retain this information for future refer-

ence.

Model No.

Seria No.

Before you start

Important Safeguards

I. Read Instructions -All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instructions should

be retained for future reference.

3. HeedWarnings -All warnings on the appliance and in the oper-

ating instructions should be adhered to.

4. Follow Instructions -All operating and use instructions should

be followed.

5. Cleaning -Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

EXCEPTION:A product that is meant for uninterrupted ser-

vice and, that for some specific reason, such as the possibility

of the loss of an authorization code for a CATV converter, is

not intended to be unplugged by the user for cleaning or any

other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in

item 5.

&Attachments - Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7.Water and Moisture- Do not use this product near water, for

example, near a bath tub, wash bowl, kitchen sink, or laundry

tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories - Do not place this product on an unstable cart,

stand, tripod, bracket, or table.The product may fall, causing seri-

ous injury to a child or adult, and serious damage to the appli-

ance. Use only with a cart, stand, tripod, bracket, or table rec-

ommended by the manufacturer, or sold PORTABLECARTWARNING

with the product. Any mounting of the _dbyRETAC)

appliance should follow the manufacturer's

instructions and should use a mounting

accessory recommended by the manufac-

turer. An appliance and cart combination

should be moved with care. Quick stops,

excessive force, and uneven surfaces may $3125A

cause the appliance and cart combination to overturn.

9.Ventilation - Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and

to protect it from overheating, and these openings must not be

blocked or covered.The openings should never be blocked by

placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

10. Power Sources -This product should be operated only from the

type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

appliance dealer or local power company. For products intend-

ed to operate from battery power, or other sources, refer to the

operating instructions.

I I.Grounding or Polarization - This product is equipped with a

polarized alternating-current line plug (a plug having one blade

wider than the other).This plug will fit into the power outlet

only one way.This is a safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the polar-

ized plug.

12. Power Cord Protection - Power supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords

at plugs, convenience receptacles, and the point where they exit

from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or cable

system is connected to the product, be sure the antenna or

cable system is grounded so as to provide some protection

against voltage surges and built-up static charges.Article 810 of

the National Electrical Code,ANSI/NFPA No. 70, provides infor-

mation with regard to proper grounding of the mast and sup-

porting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of anten-

na-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig.A)

FIGURE A.... ___

EXAMPLE OF ANTENNA GROUNDING _--r-_ -ANTDENNA

AS PER NATIONAL ELECTRICAL COD_ "_/ WIRE

__]_GROUND CLAMP ANTENNA

_--_--_---___ DISCHARGE UNIT

_Eh T-_"4_ _ROUNDcIN'GNOO1ND-UI_TORS

NECN O ELEC 2OU ; %UOD,NG

$2898A ELECTRODE SYSTEM

(NEC ART 250, PART H)

14. Lightning - For added protection for this product during a light-

ning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect

the antenna or cable system.This will prevent damage to the

product due to lightning and power-line surges.

15. Power Lines -An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or cir-

cuits.When installing an outside antenna system, extreme care

should be taken to keep from touching such power lines or cir-

cuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension cords

as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind into

this product through any openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the product.

18. Servicing - Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous volt-

age or other hazards. Refer all servicing to qualified service per-

sonnel.

19. Damage Requiring Service - Unplug this product from the wall

outlet and refer servicing to qualified service personnel under

the following conditions:

a.When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the oper-

ating instructions.Adjust only those controls that are covered by

the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive

work by a qualified technician to restore the product to its nor-

mal operation.

e. If the product has been dropped or damaged in any way.

f.When the product exhibits a distinct change in performance this

indicates a need for service.

20. Replacement Parts - When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original parL Unauthorized substitutions may result in fire, elec-

tric shock or other hazards.

21. Safety Check - Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

22. Heat - This product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

Before you start

Installation Location

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do not

place anything directly on top of the unit. Do not place

the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat.Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat

dissipation. Do not block the ventilation holes on the

sides of the unit.Avoid locations subject to strong vibra-

tion or strong magnetic fields.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the

power cord immediately and take the unit to our

Authorized Service Center for servicing.

• Do not put your fingers or objects into the unit cassette

holder.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it is

moved from a cold place to a warm place, or after heating

a cold room or under conditions of high humidity. Do not

use this unit at least for 2 hours until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public performance

and lending of discs are prohibited.

This product incorporates copyright protection technolo-

gy that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by

Macrovision Corporation and other rights owners. Use of

this copyright protection technology must be authorized

by Macrovision Corporation, and is intended for home and

other limited viewing uses only unless otherwise autho-

rized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

Symbol in this owner's manual

Many functions of this unit are depending on the disc type

or the recording mode.

To specify for what disc type or recording mode each

function is, we put the following symbols at the beginning

of each item to operate.

First:

(Press:) [_

First:

(Press:)

Available to DVDVideo discs

Available to DVD-RW inVideo mode

Available to DVD-RW inVR mode

Available to DVD-R discs

Available to Audio CDs

Available to CD-R/EW discs with

MP3 files

Available toVaS tapes

Use only _ cassettes marked

with this unit.

Indicates that you need to select the DVD

mode by pressing DVD button on the

remote control before proceeding next step.

Indicates chat you need to select theVCg

mode by pressingVCR button on the

remote control before proceeding next step.

Maintenance

SERVICING

• Please refer to relevant topics on the Troubleshooting

Guide on pages 97-99 before return the product.

• When this unit becomes inoperative, do not try to cor-

rect the problem by yourself.There are no user-service-

able parts inside.Turn off, unplug the power plug, and

please call our help line mentioned on the front page to

locate an Authorized Service Center.

CLEANING THE CABINET

• Use a soft cloth slightly moistened with a mild detergent

solution. Do not use a solution containing alcohol, spirits,

ammonia or abrasive.

CLEANING DISCS

• When a disc becomes dirty, clean it with a cleaning

cloth.Wipe the disc from the center out. Do not wipe in

acircular motion.

• Do not use solvents such as benzine, thinner, commer-

cially available cleaners, detergent, abrasive cleaning

agents or antistatic spray intended for analogue records.

CLEANING THE DISC LENS

• If this unit still does not perform properly although you

refer to the relevant sections and to "TROUBLESHOOT-

ING GUIDE" in this Owner's Manual,the laser optical pick-

up unit may be dirty. Consult your dealer or an Authorized

Service Center for inspection and cleaning of the laser opti-

cal pickup unit.

DISC HANDLING

• Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is

not used.

AUTO HEAD CLEANING

• Automatically cleans video heads as you insert or

remove a cassette, so you can see a clear picture.

•Playback picture may become blurred or interrupted

while theTV program reception is clear. Dirt accumulat-

ed on the video heads after a long period of use, or the

usage of rental or worn tapes can cause this problem. If

a streaky or snowy picture appears during playback, the

video heads in the unit may need to be cleaned.

I. Please visit your local Audio/Video store and purchase a

good qualityVHSVideo Head Cleaner.

2. If aVideo Head Cleaner does not solve the problem,

please call our help line mentioned on the front page to

locate an Authorized Service Center.

NOTES:

• Remember to read the instructions along with the video

head cleaner before use.

• Clean video heads only when problems occur.

Before you start

Before you start ................... 2

Precautions .............................. 2

Table of contents .......................... 5

Features ................................ 6

Functional overview ....................... 7

Installing batteries in the remote control .......... 9

Using a remote control ....................... 9

VCR/DVD recorder switching ................... 9

SETUP/DISC/CD menu ........................ 9

DISPLAY menu ............................ II

Connections ..................... 13

Connection to aTV ....................... 13

Connection to a cable box or satellite box .... 14

Connection to an Audio System ............. 15

Getting started ................... 16

Easy DVD recording ...................... 16

Channel setting .......................... 18

Getting channels automatically ................. 18

Adding/deleting channels ..................... 19

Selecting the TV stereo or SAP ............. 20

Clock setting ............................ 2 I

Auto Clock Setting ......................... 21

Manual Clock Setting ........................ 22

Setting the daylight savingtime ................ 24

Selecting theTV aspect ratio ............... 25

Recording ....................... 26

Information on DVD recording .............. 26

Information ............................... 26

Recording speed ........................... 26

Restrictions on recording .................... 26

Information on copy control .................. 27

Making discs playable in other DVD player (Finalize) 27

Formatting a disc ........................ 28

Settings for the recording format to a blank disc . . .28

Reformatting a disc ......................... 30

Basic recording .......................... 3 I

Checkingthe recording picture quality .......... 32

One-touch timer recording ................ 33

Timer recording ......................... 34

Hints for timer recording ..................... 36

Settings for an externa[source .............. 37

Connection to an external source .............. 37

Recording from an external source ............. 38

Dubbing Mode ........................... 39

Finalizing the discs ....................... 41

Setting a disc to protect ................... 42

Playing discs ..................... 43

Information on DVD play .................. 43

Guide to displays ........................... 43

Basic playback ........................... 44

Playback .................................. 44

Playing discs using the disc menu ............... 46

Playing discs using the title menu ............... 47

Specia[playback ......................... 48

Resume play ............................... 48

Fast forward /Fast reverse ................... 48

SkippingTV commercials during playback ......... 49

Pause .................................... 49

Step by step playback ........................ S0

Slow forward /Slow reverse play ............... S0

Zoom ................................... 51

Marker Setup .............................. 51

Search ................................. 52

Title/Chapter search ........................ 52

Track search .............................. 53

Time search ............................... 53

Repeat/Random/Program play .............. 54

Repeat play ............................... 54

Random play ............................... 54

Program play .............................. 55

Selecting the format of audio and video ...... 56

Switching audio soundtrack ................... 56

Switching subtitles .......................... 57

Switching camera angles ...................... 58

Reducin_ block noise ........................ 58

Editing ......................... 59

Information on disc editing ................. 59

Guide to a title list .......................... 59

Editing discs inVideo mocle ................... 59

Editing discs inVR mocle ..................... 60

Editing DVD-RW discs in Video mode ........ 61

Deleting titles ............................. 6 I

Putting names on titles ...................... 62

Setting or clearing chapter markers ............. 64

Editing DVD-RW discs in VR mode (Original) . .65

Deleting titles ............................. 65

Deleting parts of titles ....................... 66

Putting names on titles ...................... 67

Setting or clearing chapter markers ............. 69

Setting pictures for thumbnails ................. 70

Setting titles to protect ...................... 72

Releasing titles from protecting ................ 73

Editing DVD-RW discs in VR mode (Playlist) ...74

Deleting titles ............................. 74

Deleting parts of titles ....................... 75

Putting names on titles ...................... 76

Setting or clearing chapter markers ............. 78

Setting pictures for thumbnails ................. 79

Adding titles to a Playlist ..................... 81

Deleting a Playlist ........................... 82

Editing DVD-R discs ...................... 83

Deleting titles ............................. 83

Puttin_ names on titles ...................... 84

Changing the SETUP menu ......... 85

Tour of the SETUP menu .................. 85

Settings for Language ..................... 86

Settings for Display ....................... 88

Settings for Audio ........................ 90

Settings for Parental lock level .............. 92

VCR functions ................... 94

Playback ............................... 94

Recording and One-touch timer recording .... 94

Recording ................................. 94

One-touch timer recording .................... 95

Search ................................. 95

Index Search ............................... 95

Time Search ............................... 96

Other operations ........................ 96

Others ......................... 97

Troubleshooting ......................... 97

RF converter output ..................... I00

Language code ......................... I 0 I

Glossary ............................... 102

Specifications ........................... 103

Espafiol ........................ 104

Before you start

Followings are what you can do with this unit.

Recording

[DVDmodelIVCRmodel

This unit is compatible with both DVD-RW, which is

rewritable repeatedly, and DVD-R, which is available for

recording once.Also, this unit allows to record to the

video cassette tape. You can choose either one for your

convenience.

Up to 8 programs recording:

You can program the unit to record up to 8 programs, up

to a year in advance. Daily or weekly program recordings

are also available.

One-touch timer recording:

Easilyyou can set arecording time as you prefer. Every

time the REC/OTR button on the remote control or the

RECORD button on the front panel pressed during

recording, the recording time will be increased by 30 min-

utes up to 8 hours.The recording automatically stops

when the recording time you set is reached.

Dubbing mode:

You can copy a DVD disc to a videotape or copy a video-

tape to a DVD disc.This function will be possible only if

the DVD disc is not copy protected.

[DVD mode I

REC MONITOR:

You can confirm the picture quality for recording in the

current recording speed which you set.

If you want to change the recording speed, press REC

SPEED button to set the desired recording mode.

Automatic Chapter marker setting:

Chapter markers will be put on recordings as you set in

SETUP menu before attempting to record.

Automatic Title menu making:

The unit makes title menus automatically when finalizing

the disc which are recorded in Video mode.

Automatic PLAYLIST making (VR mode):

A Playlist will be prepared from an Original list, so that

you can edit titles in a Playlist as you prefer.

An Original list is kept as it is.

Play

IDVDmode]

Theater surround sound in your home:

When connecting the unit to an amplifier or a decoder which is

compatible with Dolby Digital, you are allowed to experience the

theater surround sound from discs with surround sound system.

Quick search for what you want to watch:

You can easily find the part you want to watch using searchfunc-

tion. Search for a desired point on a disc by title, chapter, or time.

Start to play from Original and Playlist (VR mode):

Title playing is available from either an Original list or Playlist.

IvcRmode]

Quick search for what you want to watch:

You caneasily find the part you want to watch usingIndex

search/Time search functions.An index marl< will be assignedat

the beginning of each recordingsyou make. For Time search func-

tion, you cango to a specific point on a tape by entering the

exact amount of time you wish to sldp.

Editing

IDVDmode]

Setting/Clearing chapter markers:

You can easily add chapter markers anywhere in your

recordings for easy editing. (VR mode)

Making your own Playlist:

With the original remains as it is, you can edit titles on

Playlist variously as you prefer.

Putting names on titles.

Setting pictures for thumbnails.

Setting/clearing chapter markers.

Deleting parts of titles, etc.

Protecting titles:

To avoid erasing titles, the protect function is useful when

it is ON in the original list.

Compatibility

IDVDmode]

Available for playing discs recorded in Video mode

on a regular DVD player (Video mode):

Discs recorded in theVideo mode can be played on regular

DVD players, including computer DVD drives compatible with

DVD-Video playback*.You will need to finalize the discs

recorded inVideo mode to play in other DVD players.

* DVD-VideoFormat(Videomode)is a new formatfor recordingon DVD-

R/RWdiscsthat wasapprovedby the DVDForumin 2000.Adoptionof this for-

mat isoptionalformanufacturesof DVDplaybackdevices,andthereareDVD-

Videoplayers,DVD-RO/vldrivesorother DVDplaybackdevicesthat do not

playDVD-P,/RWdiscsrecordedin the DVD-VideoFormat.

Before you start

345

1. POWER button /indicator (DVD/VCR)

Press to turn the unit on and off.

If timer programmings have been set, press to set the

unit in timer-standby mode. Press to cancel the timer

standby mode, and turn the unit on.

Lights up when power is on.

2. Cassette compartment (VCR)

Insert a tape here.

3. _OPEN/CLOSE button (DVD)

Press to open or close the clisctray.

4. Select _il _1_ button (DVD/VCR)

Press to select the component you wish to operate.

5. Disc tray (DVD)

Place a disc when open.

6. AUDIO INPUT jacks (LINE2) (DVD/VCR)

Use to connect external equipment with standard audio cables.

7. VIDEO INPUT jack (LINE2) (DVD/VCR)

Use to connect external equipment with a standard video cable.

8. S-VIDEO INPUT jack (LINE2) (DVD only)

Use to connect the S-Video output of external equip-

ment with an S-Video cable.

9. RECORD button (DVD)

Press to start recording.

Press repeatedly to start a One-Touch Recording.

10. PLAY button (DVD)

Press to start or resume play.

11. STOP button (DVD)

Press to stop playback or recording.

Press to cancel the proceeding timer recording in DVD.

12. DVD SELECT indicator

This indicator appearswhen the DVD output mode is selected.

13. VCR SELECT indicator

This indicator appearswhen theVCR output mode is selected.

14. DUBBING button (DVD/VCR)

Press to startVCR to DVD (DVD toVCR) duplication

which you set in the SETUP menu.

15. CHANNEL •/•button (DVD/VCR)

Press to change the channel up and down.

16. Display (DVD/VCR)

Refer to "Guide to Displays on the front panel" on page 12.

17. Remote control sensor (DVD/VCR)

Receive signals from your remote control so that you

can control the unit from a distance.

18. RECORD button (VCR)

Press once to start a recording. Press repeatedly to

start a One-Touch Recording.

19. PLAY button (VCR)

Press to start playback.

20. STOP/EJECT button (VCR)

EJECTbutton-Press to remove the tape from the unit.

STOP button-Press to stop the tape motion.

Press to cancel the proceeding timer recording in VCR.

21. F.FWD button (VCR)

Press to rapidly advance the tape, or view the picture

rapidly in forward during playback. (Forward Search)

22. REW button (VCR)

Press to rewind the tape, or to view the picture rapidly

in reverse during the playback mode. (Rewind Search)

23 45 6

1. AC Power Cord (DVD/VCR)

Connect to a standardAC outlet to supply power to this unit.

2. S-VIDEO INPUT jack (LINE1) (DVD only)

Use to connect the S-Video output of external equip-

ment with an S-Video cable.

3. COMPONENTVIDEO OUTPUT jacks (DVD only)

Use to connect a TV monitor with component video

inputs with component video cables.

4. AUDIO INPUT jacks (LINE1) (DVD/VCR)

Use to connect external equipment with standard

audio cables.

S. AUDIO OUTPUT jacks (DVD/VCR)

Use to connect a TV monitor, AV receiver or other

equipment with standard audio cables.

6. TVANTENNA IN jack (DVD/VCR)

Use to connect an antenna.

7. TVANTENNA OUT jack (DVD/VCR)

Use to connect an antenna cable to pass the signal

from the TV ANTENNA IN to your TV monitor.

1211 10 9 8 7

8. VIDEO OUTPUT jack (DVD/VCR)

Use to connect aTV monitor, AV receiver or other

equipment with a standard video cable.

9. VIDEO INPUT jack (LINE1) (DVD/VCR)

Use to connect external equipment with a standard

video cable.

10. S-VIDEO OUTPUT jack (DVD only)

Use to connect the S-Video input of aTV monitor, AV

receiver or other equipment with an S-Video cable.

11. AUDIO OUTPUT jacks (DVD only)

Use to connect aTV monitor, AV receiver or other

equipment with standard audio cables.

12. COAXIAL DIGITAL AUDIO OUTPUT jack

(DVD only)

Use to connect an AV receiver, Dolby Digital

decorder or other equipment with a coaxial digital

input with a digital coaxial cable.

rNote: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause perma- ]

• nent damage to the unit. J

Before you start

2 m

78i

9--

10 11--

12--13

QQ_

REe/OTRSETUP T_ME_P_0G

............. Q_

_C9_

_B_ _r_sKIP

--15

m17

m18

m19

m2021 22

--23 24

--25 26

J27

m28

m30

1. POWER button (DVD/VCR)

Pressto turn the unit on and off.

If timer programmings have

been set, press to set the unit

in timer-standby mode. Press

to cancel the timer standby

mode, and turn the unit on.

2. Number buttons (DVDNCR)

Pressto selectchannelnumbers.

Pressto select atitle/chap-

ter/track on display or aTV

channel.

Or press to enter values for the

settings in the SETUP menu.

3. DISPLAY button (DVD/VCR)

Pressto display or change the

on-screen display.

4. VCR button

Press to activate the remote

control in VCR mode. (Refer

to page 9)

Press to select theVCR out-

put mode.

5. <1<1button (DVD/VCR)

•DVD mode

During playback, press to play

fast reverse.

Or during playback is paused,

press to play slow reverse.

• VCR mode

Press to rewind the tape, or

to view the picture rapidly in

reverse during the playback

mode.

6. REC/OTR button (DVD/VCR)

Press once to start a record-

ing. Press repeatedly to start

16 8,

a One-Touch Recording.

SETUP button (DVD/VCR)

Pressto display the setup menu.

REC MONITOR button (DVD)

Press to check the video to be

recorded before attempting.

9. MENU/LIST button (DVD)

Pressto display the Disc menu.

To change ORIGINAL and

PL_YLIST on the TV screen.

(VR mode only)

10. TOP MENU button (DVD)

Press to display the top menu.

11. CLEAR/C-RESET button

(DVD/VCR)

• DVD mode

Press to clear the password once

entered or to cancel the pro-

gramming for CD or to clear the

selecting marker number in the

marker setup mode or to clear

the program once entered in the

timer recording setting mode,etc.

•VCR mode

Press to reset the tape counter.

12. SEARCH MODE button (VCR)

To call up the index or time

search menu.

13. CM SKIP button (DVD)

During playback, press to sldp

the 30 seconds.

14. REC SPEED button

(DVD/VCR)

Press to switch the recording

speed.

I S. OPEN/CLOSE _ button (DVD)

Press to open or close the

disc tray.

16. AUDIO button (VCR)

During playback a HiFi video

tape, press to change the

AUDIO OUT setting "HiFi"

and "MONO".

17. CH •/•buttons (DVD/VCR)

• DVD mode

Press to change the channel

up and down.

•VCR mode

Press to change the channel

up and down.

Press to adjust the tracking

during playback or in slow

motion of the tape. Or while

playback is in still mode,

adjust the picture blurred ver-

tically.

18. VIDEO/TV button (DVD/VCR)

Press to selectVIDEO or TV

position.

19. SLOW button (VCR)

During playback, press to

view the video tape in slow

motion.

20. PAUSE I I button

(DVD/VCR)

Press to pause play or

recording.

21. DVD button

Press to activate the remote

control in DVD mode. (Refer

to page 9)

Press to select the DVD out-

put mode.

22. PLAY I_ button

(DVD/VCR)

Press to start or resume play.

23. IH_ button (DVD/VCR)

• DVD mode

During playback, press to play

fast forward.

•VCR mode

Press to rapidly advance the

tape, or view the picture

rapidly in forward during play-

back.

24. STOP • button

(DVD/VCR)

Press to stop playback or

recording.

25. TIMER PROG. button

(DVD/VCR)

Press to display the timer

program setting menu.

26. ENTER button

(DVD/VCR)

Press to confirm or select

menu items.

27. • /•/_1 /I_ buttons

(DVD/VCR)

Press to select items or settings.

28. RETURN -,_ button

(DVD/VCR)

Press to return to the previ-

ously displayed menu screen.

29. ZOOM button (DVD)

During playback, press to

enlarge the picture on the

screen.

30. SKIP I<< button (DVD)

During playback, press to skip to

the previous chapter or track.

Or during playbackis paused,

pressto play reverse step by step.

SKIP IHH button (DVD)

During playback, press to sldp to

the next chapter or track.

Or during playback is paused,

pressto play forward step by step.

Before you start

Installing batteries in the remote control

Install two AA batteries (supplied) matching the

polarity indicated inside battery compartment of the

remote control.

m[3]

Note:

Incorrect use of batteries can result in hazards such

as leakage and bursting. Please observe the following:

•Do not mix new and old batteries together.

• Do not use different kinds of battery together,

although they may Iook similar,different batteries

may have different voltages.

• Make sure that the plus and minus ends of each

battery match the indications in the battery com-

partment.

• Remove batteries from equipment that is not going

to be used for a month or more.

• When disposing of used batteries, please comply

with governmental regulations or environmental

public instruction's rules that apply in your country

or area.

• Do not recharge, short-circuit, heat, burn or disas-

semble batteries.

Using a remote control

Keep in mind the following when using the remote

control:

• Make sure that there is no obstacle between the

remote control and the remote sensor on the

unit.

• Use within the operating range and angle as

shown.

• Remote operation may become unreliable if strong

sunlight or fluorescent light is shining on the

remote sensor of the unit.

• Remote control for different devices can interfere

with each other. Avoid using remote control for

other equipment located close to the unit.

• Replace the batteries when you notice a fall off in

the operating range of the remote control.

Within about

23feet (7m)

Remote

control

Because this product is a combination of aVCR and a DVD recorder, you must select first which com-

ponent you wish to operate with the SELECT button.

[VCR MODE ]

Press theVCR button on the remote control,

(Verify that theVCR SELECT indicator is lit.)

[DVD MODE I

Press the DVD button on the remote control,

(Verify that the DVD SELECT indicator is lit.)

Note

•Pressingonly the SELECT button on the front

panel DOES NOT switch the mode of the

remote control.You MUST select the correct

mode on the remote control.

• Pressing the SETUP or the TIMER PROG.

button switches the unit to the DVD mode.

SELECTbutton

VCR button_,

DVD button=

DVDSELECT

indicator

VCRSELECT

indicator

OO0,Q

0000

Before you start

The unit uses the following types of display for most operations. SETUP/DISC/CD menu,Title list, and DIS-

PLAY,which allows you to change the playing status of disc during play. DISPLAY also gives you some disc

information for checking the status of the disc.

SETUP/DlSC/CD menu

PressSETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing •/•/

_1/I_ buttons.Then, press ENTER button to display each menu.

These provides entries to all main functions of the unit.

"SETUP" is available only in the "DISC" is availableonly when a DVD-R/RW disc is "CD" is available only when an

Stop mode. inserted into the unit. When playingback a DVD- Audio CD disc or a CD-R/RW

Video disc (commercially available)or the finalized disc with MP3 files is inserted

LDVD-Rdisc,you cannot seect D SC . into the unit.

Playback Setting

1. Playback:

To set up the unit to play discs as

you prefer.

2. Recording:

To set up the unit to record to

discs as you prefer.

3. Display:

To set up the OSD screen and the

front display of the unit as you

prefer.

4. Select Video:

To choose a line input to record

to DVD discs from other video

equipment.

5. Clock:

To set up the clock of the unit as

you need.

6. Channel:

To make the channel setting of

the unit as you prefer.

1. Edit:

Turns on a title list, (VVhen a disc

with VR mode is inserted,

'Original' or 'PlayList' is available.),

which shows the recorded titles

on the disc.

2. Format:

Allows you to erase all of the

recorded content on the disc.

The disc will be completely blank.

3. Finalize:

Allows you to finalize a disc

recorded titles.

4. Disc Protect (VR mode

only) :

Allows you to protect a disc from

accidental editing or recording.

1. Random Play:

To set the random play program-

ming.

2. Program Play(Audio CD

only):

To set the program playing.

Before you start

DISPLAY menu

I DVD mode I

First: l

Press DISPLAY button to call up

the display menu.This menu will

give you the information on the

playing disc. Some operations are

available while disc is playing.

Details are on page 41.

1. Indicates a disc type and a

format mode.

2. Indicates a recording mode

and possible recording time.

3. Indicates a current channel

number.

4. Indicates a title number, chap-

ter number, and the time

elapsed of disc play.

5. Each icon means:

: Search

:Audio

: Subtitle

:Angle (exceptVR mode)

@ :Repeat

:Marker

iii_ : Noise Reduction

:Zoom

IVCRmode I

First:

Press DISPLAY button to call up

the display menu.

I. Playback status of the current

tape.

2. Indicates a current channel

number.

3. Indicates a recording speed

only five seconds.

4. Indicates aTape Counter.

5. Audio status of the current

tape.

Before you start

1. Current status of the unit

|| : Appears when a disc play

is paused.

_1_ : Appears when playing a

disc.

: Appears when the timer

programming has been

set and is proceeding.

REC : Appears during recording

process.

REPEAT :

Appears during repeat

play.

O'O:

Appears when a tape is in

the unit.

Display message

4 2

vc. o.wI

I4........................................................

u.u u "

2. Disc type and Current

status of the unit

CD :Appears when an audio CD

or a discwith MP3 files is

inserted in the disc tray.

DVD : Appears when a DVD disc

is inserted in the disc tray.

Appears when the timer

recording is proceeding in

DVD.

Appears when DVD is in 5.

the timer recording stand- •

by mode. •

DVD R :

Appearswhen a DVD-R disc •

is inserted in the disctray. •

DVD RW :

Appears when a DVD-

RW disc is inserted in •

the disc tray.

VCR: Appears when the timer

recording is proceeding in

VCR.

Appears when VCR is in

the timer recording stand-

by mode.

VCR_ DVD :

AppearsduringVCRto DVD

duplicationprocess,

VC R_- DVD :

Appearsduring DVD toVCR

duplication process.

3. Recording speed

Indicates the recording speed of

the disc.

4. Title/Track and Chapter

mark

:Appears when indicating

a title/track number.

:Appears when indicating

a chapter number.

Displays the following

Playing time /remaining time

Current title /chapter /track

number

Recording time

Clock

Channel number

VCR tape counter

OTR remaining time

6. PM : Appears in the after-

noon with the clock

displaying.

1. Appears when the disc tray is

opening.

[I- I w7 w- J- i

DVD RW I

2. Appears when the disc tray is

closing or close.

3. Appears when a disc is loading

in the disc tray.

4. Appears when recording data

is writing on to the disc.

Connections

Antenna

Cable

Signa!

• ii

or ;

_mmtm_

iiil

i? iii ii _

i i i i

[_] Plug in the AC power cord of this unit.

unh,v,_

Audio cable

(supplied)

Basic Audio Good picture

Video

cable

(supplied)

VIDEO OUT

Better picture

S-Video

cable

(commercially

available)

FL7

S-VIDEO OUT

Best picture

Component

Video cables

(commercially

available)

CO1'4 PONENT VIDEO OUT

AUDIO OUT

I .o. e.......................................................................................................

Connect this unit directly to the TV. If the A/V cables are connected to aVCR, pictures may be distorted

due to the copy protection system.

me ho eo0yu0OVOmo e li!!!tll

<_ Connections _>

Cable box or

;atellitebox)

(Back of this unit)

RF Cable

(supp[[_

Select this connection when you want to view or record a scrambled channel.With this connection, channels

cannot be changed on this unit.You can view or record ONLY the channels you have selected on the cable

box or the satellite box.

• While you are recording, only the recorded channel can be viewed.

To select channels of the cable box or satellite box

I) Turn on this unit by pressing POWER button.The "POWER" indicator on the front panel will appear.

Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of

the cable box or satellite box).

• If noise appears on the TV screen, pressVIDEO/TV button on the remote control.

• If you use the channel 4, you need to change this unit's RF output to channel 4. Refer to "RF converter

output" on page 100.

2) At the TV, select channel 3 or 4 (the same channel as you have selected at step I).

3) At the cable box or satellite box, select the channel you want to view or record.

....... ..............;; ................."......

Signal ........

RFCable (supplied) RF Cable (Back of TV)

Select this connection when you want to change channels on this unit.With this connection, you may watch

one channel while recording another.

• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box

I) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit's RF output chan-

nel.)

• Refer to "RF converter output" on page 100.

2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.

3) Turn on this unit by pressing POWER button. The "POWER" indicator on the front panel will appear.

Then, select the channel you want to view or record.

• If noise appears on the TV screen, pressVIDEOFFV button on the remote control.

To playback a DVD disc or a tape

Follow the steps I) to 2) above.Then, playback a DVD disc or a tape.

• Refer to "Playback" on pages 44-45, 94.

To view one channel while recording another

I) While you are recording on this unit, press VIDEO/TV button.

2) At the cable box or satellite box, select the channel you want to view.

Note to the Cable TV System Installer :

This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the

National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the

cable ground shall be connected to the grounding system of the building, as close to the point of cable

entry as possible.

Connections

•When you change the connections, all devices should be turned off.

• Refer to each owner's manual for further information on other devices.

Stereo system

Audio cable

(supplied)

AUDIO OUT

Analog audio

input jacks

_D4oOUT

Dolby Digital decoder,

MD deck or DAT deck

Audio Coaxial

Digital cable

(commercially

available)

DIGITAL

AUDIO OUT

Digital audio

input jack

X_A

Note

•If output is Dolby Digital encoded audio, connect

to aDolby Digital decoder, and set "Dolby Digital"

to "Stream" for the "Digital Out" setting in the

SETUP menu. (Refer to pages 90-91.)

• The audio source on a disc in a Dolby Digital 5. I

channel surround format cannot be recorded as

digital sound by an MD or DAT deck.

• Unless connected to a Dolby Digital decoder, set

"Dolby Digital" to "PCM" for the "Digital Out" set-

ting in the SETUP menu. Playing a DVD using incor-

rect settings may generate noise distortion, and may

also damage the speakers. (Refer to pages 90-91.)

• Set "Dolby Digital" to "PCM" for the "Digital Out"

setting in the SETUP menu for connecting to an

MD deck or DAT deck. (Refer to pages 90-91.)

• By hooking this unit up to a Multi-channel Dolby

Digital decoder, you can enjoy high-quality Dolby

Digital 5.1 channel surround sound as heard in the

movie theaters.

Getting started

The following will help you to understand easily how to record to DVD discs•

Note:

Make sure batteries are in the remote control and

.s..t..o.e ........

There are several types of DVD disc recordable

to choose from• Choose an applicable type by

"DVD disc types" on this page.

This unit can record on the following type of

discs•

R RW

R4.7

For example, when you want to record repeated-

ly on the same disc, or when you want to edit the

disc after recording, select the rewritable DVD-

RW type disc.

When you want to save recordings without any

alteration, a non-rewritable DVD-R can be your

choice•

'ou have connected this unit and the TV correctly•

Turn on

the unit

..o.v..o.. ..................................................

•"_'_ : Host suitable. "_'_ : Can be used. _f_":Some functions are limited. :Cannot be used.

Record TV programs _'#_ Q_-Q "_

Reuse by deleting unwanted contents "2_'_ "_ --

Edit recorded contents _'_ _ "_

Edit/Record from connected equipment _ "_"_ _f_"_"

Copy discs for distribution _Q_I _Q_ _

Play on other DVD equipment -_f_l ._ _____

Recording

Rewritable? Yes Yes No

Can create chapters at fixed intervals (auto.) Yes Yes Yes

Can create chapters wherever you like (manual) Yes No No

Can record 16:9 size pictures Yes Yes Yes

Can record Copy-Once programs Yes No No

Editing

Can perform basic edit functions Yes Yes No

Can perform advanced edit functions (Playlist edit) Yes No No

I DVD-RW (VR mode) can only be played on DVD Note:

equipment that isVR compatible. For details of the above functions and implied

restrictions, see the explanations inside the manual.

Format the disc

_oololloloooooeolloooooooooloo

Insert the disc in the unit.

Then, format the disc from

SETUP menu.Video format

(Video mode) orVideo

recording format (VR mode)

will be available depending on

the disc type inserted.This is

necessary to prepare the disc

for recording. Details are on

pages 28-30•

Getting started

Step 3: Select the

Recording

............. ........

To select the DVD mode

To select the recording

speed

Step 4: Select the

desired

channel

•eeoeeeeem Jleeeoeeeeem Jleeeoe,

¸¸¸

..H.!et..!'. eet nt. ........................

screen.

What is titles and chapters?

The contents of DVD disc are generally

divided into some titles.Titles may be

further subdivided into chapters.

You can select the title you want to play from a displayed menu, and immedi-

ately start to play. Recorded contents are very accessible on a disc, the proce-

dure is simple really as you choose a

title on a chapter from the menu Start•Rec. Stop_St_rt Stop_ec.

i Title 1 i i Title 2 i

'Di' _i

iChapter 1 iChapter 2i Chapter 3i i Chapter 1 iChapte_r 2i

You will find editing discs very easy, and the unit offers convenient edit func-

tions, which are possible only with DVD-R/RW discs.

You can edit the following from a title list.

•Putting names on titles

•Setting pictures for thumbnails (VR mode)

•Setting/clearing chapter markers

•Deleting parts of titles (VR mode)

Original and Playlist (VR mode)

You can edit the recordings in Playlistwithout changing the original record-

ings.Any Playlist does not take up much disc space.

What "Original" or "Playlist" is for?

Throughout this manual, you will find Original and Playlist to refer to the actual

content and the edited version.

•Original content refers to what's actually recorded on the disc.

•Playlist content refers to the edited version of the disc; how the Original

content is to be played.

Step 5: Record to

.............D.y.p...d.i.s..c..s.

PQRS TUV W×YZ _DEO_V

OQO_

_EC_ON_O_ E_E_

Step 6: Stop the

............. ....

iiiii'_:_i;i'!!iiil¸

!ii_iiiii_!_iiiiiiii

iiii!_ilili_iiii_i_iiiiiiiiil

ii!iii!_ii!;_i

Getting started

All channels are stored in the unit

when purchased.We recommend

that you get available channels in

your area stored using "Auto

Preset" in the Channel Preset of

the SETUP menu.

Getting channels auto-

matically

olllllllllllllllllllllllllllllllllo

Press POWER button to turn

on the unit.

lllllllllllllllllllllllllllllllo

Turn the TV on and be sure

to select the input to which

the unit is connected.

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

lllllllllllllllllllllllllllllllt

Select SETUP using _1 /I_

buttons, then press ENTER

button.

SETUP menu will appear.

Playback Setting

lllllllllllllllllllllllllllllllt

Select "Channel" using •/•

/_1 /I_ buttons, then press

ENTER button.

Channel Preset menu will appear.

Setup > Channel Preset [2_F6-v'_

olleeeelllllllleeeelllllllleeeelllo

Select "Auto Preset" using •

/•buttons, then press

ENTER button.

The unit will start getting chan-

nels available in your area.

(Auto Preseltlng Now )

1111111111111111111111111111111_

Press SETUP button to exit.

•You can select only the channels

memorized in this unit by using

the CHANNEL buttons.

PQRS TUV WXYZ _DEO_V

OQ@_

SPACE SLOW

Q 0

D_P_Y VCR DVD MUSE

G@D

¢L_RI_RESET ZOOM SKiP SKIP

_OQO

_g_ c_sK_P

--4

To select a channel

";; "; ....

directly entering channel using

the Number buttons on the

remote control.

Notes for using the

Number buttons:

When selecting cable channels

which are higher than 99,

enter channel numbers as a

three-digit number.(For exam-

ple: I 17, press I, 1,7)

You must precede single-digit

channel numbers with a zero

(For example: 02, 03, 04 and

SO on).

You can select the line input

mode ("Ll" or"L2").To select

%1" by pressing [0],[0],[ I].To

select"L2" by pressing

[0],[0],[2].Details are on page 38.

Note

Jeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

If the auto presetting is can-

celled during presetting, some

channels not yet preset may

not be received.

The selection will depend on

how you receive the TV chan-

nels.

ro cancel the auto preset-

ting during scanning:

Press RETURN button or

SETUP button to cancel.

Getting started

Adding/deleting channels

The channels you no longer

receive or seldom watch can be

deleted from the memory.You also

may add channels into memory.

olllloeeolllloeeolllloeeolllloeeolo

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

Select SETUP using _1 /I_

buttons, then press ENTER

button.

SETUP menu will appear.

Select "Manual Preset" using

•/•buttons, then press

ENTER button.

Manual Preset menu will appear.

_tup_ Channel Ptese_ > Manual Preset

olleooelllllllleooelllllllleooelllo

Select the channel number to

add or delete.

Press _1 button to move to a

lower channel number.

Press I_ button to move to a

higher channel number.

Select "Channel" using •/•

/_1 /I_ buttons, then press

ENTER button.

Channel Preset menu will appear.

o611111111111111111111111111111111o

Select "Add" or "Delete"

using •/•buttons, then

press ENTER button.

The channel number will be

added or deleted from a channel

memory.Then a next channel

number will appear so that you

can continue adding or deleting

channels.

oloooeeoll==lloooeeoll==lloooeeollo

Press SETUP button to exit.

Getting started

You can select asound channel to

oeeeeoeeeeeeeoeeeeeeeoeeeeeeeoeeeee

output from TV. "Stereo" has ,4

been selected as the default. Select "TV Audio Select"

...................................4 using •/•buttons, then

! press ENTER button.

Press SETUP button to dis- Option window will appear.

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

oeeeeooeeeeeeooeeeeeeooeeeeeeooeeee

Select "Stereo" or "SAP"

................................... using •/•buttons, then

2press ENTER button.

Select SETUP using _1 /I_

buttons, then press ENTER

button.

SETUP menu will appear.

Playback Setting

oeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeo

Select "Channel Preset"

using •/•/_1 /I_ buttons,

then press ENTER button.

Channel Preset menu will appear.

Stereo:

Outputs main-audio.

SAP:

(Secondary Audio Program)

Outputs sub-audio.

Refer to the item in "Glossary"

on page 102 for more informa-

tion.

emleeeeeemleeeeeemleeeeeemleeee,

Press SETUP button to exit.

RECSPEE# AUDIO OFEN_LOSE

_QQ

,@/: ABC DEP

@@(g)

PQRS TUV WXYZ VIDEO,TV

O Q O q_.__

SPACE SLOW

Q O

DLSpLAy VCR DVD PAUSE

¢LEARIO-RESETZOOM SKIP SKIP

_OQO

--2

Getting started

Set the clock before you try the

timer recording. If a Public

Broadcasting Station (PBS) is available

in your area,followAuto Clock

Setting below. If not, follow Manual

Clock Setting on pages 22-23.

Auto Clock Setting

Make sure

•The antenna/cable TV connec-

tions are correct.

•If this unit is connected to a

Cable Box or Satellite Box, select

the local PBS station on them to

set the clock automatically.

t111111111111111111111111111111111t

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

leellllleeellllleeellllleeellllleeo

Select "Auto Clock Setting"

using •/•buttons, then

press ENTER button.

Option window will appear.

leellllloeellllloeellllloeellllloeo

• If you do not know your

PBS channel number, select

"Auto" using •/•buttons,

then press ENTER button.

•If you know your PBS chan-

nel number, select "Manual"

using •/•buttons, then

press ENTER button.

1111111111111111111111111111111,

Select SETUP using _1 /I_ but-

tons, then press ENTER button.

SETUP menu will appear.

,111111111111111111111111111111111,

Select"Clock" using•/•/_1 /I_

buttons,then pressENTER button.

Clock menu will appear.

Enter your PBS channel

number using Number or •

/•buttons, then press

ENTER button.

llllloelllllloelllllloelllllloeo

Press SETUP button to exit.

llllloelllllloelllllloelllllloeo

Press POWER button to turn

off the unit.

This unit will search for the time

only when the power is off. Leave

it off for several minutes to give

this unit time to set the clock on

the display of the front panel.

•Note

le•eee•eee•eee•eee•eee•eee•eeel

The clock may set itself auto-

matically after you connect the

antennaicable signal to this

unit and plug in the power

cord. In this case, the current

time will appear on the display

of the front panel.

If the current time is not dis-

played or the displayed clock

is not correct, set the clock

manually.

Getting started

Manual Clock Setting

Iooooleelommmooooleelommmooooleelol

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

oeleeoooooo*oeleeoooooo*oeleeooe

Select SETUP using _1 /I_

buttons, then press ENTER

button.

SETUP menu will appear.

oooeoeoeeooeoeoeeooeoeoeeooeoeoeeoo

Select "Clock Setting" using

•/•buttons, then press

ENTER button.

A clock setting window will

appean

Press ENTER button again.

Default date will appear.

i eoeoeoeeeoeoeoeeeoeoeoeeeoeoeoeeeo

Enter the date (month /day /

year) using •/•buttons.

Press _91/I_ buttons to move

the cursor.

RECSPEED AUDIO O_LOSE

,@]: ABC DEP

@ @ @

PQRS TUV WXYZ _DEOffV

0 Q 0

SPACE SLOW

Q 0

D_P_Y VCR DVD _USE

¢LF_RIC-RESETZOOM SKIP SKIP

_OQO

--2

oo**oleeooommo**oleeooommo**oleeooo

Select "Clock" using •/•/

_1 /I_ buttons, then press

ENTER button.

Clock menu will appear.

o*oeooomo*oeooomo*oeooomo*oeoooo

Enter the time (hour /

minute) using •/•buttons.

Press _91/I_ buttons to move

the cursor.

Note

either there is apower failure

or this unit has been unplugged

for more than 30 seconds

when you set the clock manu-

ally.

Getting started )

Press •/•buttons to select

AM or PM, then press ENTER

button.

Clock menu will appear, then the

settings will be activated.

oeooeeoeoooeeeooeeoeoooeeeooeeoeooo

Press SETUP button to exit.

Although seconds are not displayed,

they begin counting from zero.

Repeat steps (I) to (3) in "Manual Clock Setting".

• oooooalet t mmoooooalet t mmoooooalet • oaaeet mmoooooaaeet mmoooooaaeet mmooo

4 5

Select "Auto Clock Setting"

using •/•buttons, then

press ENTER button.

Option window will appear.

Select "OFF" using •/•

buttons, then press ENTER

button.

oeeeoooeoeeooeeeoooeoeeooeeeoooo

Press SETUP button to exit.

Getting started

Setting the daylight say-

ing time

When Daylight Saving Time is

ON, the unit clock will automati-

cally move forward one hour on

the first Sunday inApril and move

back one hour on the last Sunday

in October.

oooeeeeelooeeeeelooeeeeelooeeeeeloo

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

eeeelloeeeeelloeeeeelloeeeeello.

Select SETUP using _1 /I_

buttons, then press ENTER

button.

SETUP menu will appear.

.eeeeoeleoeeeeeeeoeleoeeeeeeeoeleo.

Select "Daylight Saving

Time" using •/•buttons,

then press ENTER button.

Daylight Saving Time options will

appear.

Daylight Saving Time

.eeeeeeleoeeeeeeeeeleoeeeeeeeeeleo.

Select "ON" or "OFF" using

•/•buttons, then press

ENTER button.

Choose "ON" when currently

observing the daylight saving time.

lllllQeeeleelllllQeeeleelllllQe.

Press SETUP button to exit.

RECSPEED AUDIO OFE_LOSE

_QQ

,@/: ABC DEP

@@(g)

PQRS TUV WXYZ VIDEOfTV

OQO_

SPACE SLOW

Q O

D_pLAy VCR DVD PAUSE

O O I_O1@

CLEARI6RESETZOOM SKIP SKiP

_OQO

--2

+ooeeeeelooeeeeelooeeeeelooeeeeelo+

Select "Clock" using •/•/

_1 /I_ buttons, then press

ENTER button.

Clock menu will appear.

Getting started

You can select the TV aspect ratio

to match the formats of what you

are playing with the unit and your

TV screen (4:3 standard or 16:9

widescreen TV).

"4:3 Letter Box" has been select-

ed as the default.

iIIiiiIIooeeelllllllooeeelllllllool

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

Playback menu will appear.

lllllllllllllllllllllllllllllllo

Select "TVAspect" using •/

•buttons, then press ENTER

button.

Option window will appear.

_ ..... o........

........©Q

,@/: ABe DEF

_OQ

00@

PaRS TUV WXYZ VBDEOrrV

00@_

SPACE SLOW

Q Q

DL_PLAY VCB DVD PAUSE

®_L@Q

CLE_/C_ESET ZOON SKIP SKiP

_00_

--2

lllllilllllllllllilllllllllllilo

Select SETUP using _! /!_

buttons, then press ENTER

button.

SETUP menu will appear.

Playback Setting

Refer to the Note on this

page.

.5lllllloelllllloelllllloelllllloeo

Select a desired option using

•/•buttons, then press

ENTER button.

.611111111111111111111111111111111.

Press SETUP button to exit.

illllllleeeeellllllleeeeelllllllee.

Select "Playback" using • /•

/_!l /I_ buttons, then press

ENTER button.

Note

• eeeseeeeeeeeeeeeeeeeeeeeeeesee.

If you have astandard TV:

Select "4:3 Letter Box", so that

black bars appear on the top

and bottom of the screen.

Select 4:3 Pan & Scan for a

full height picture with both

sides trimmed.

If you have a widescreen TV:

Select 169 Wide .

Recording

Information

This unit can record to DVD-R and DVD-RW discs.

When recording, you will need to select a recording

format between Video mode and VR mode depend-

ingon the disc format.The disc format for DVD-R

is always "Video format," so a recording format will

be "Video mode".

On the other hand, when recording to DVD-RW, a

recording format will be "Video mode" or "VR

mode" because a disc format is available between

"Video Recording format" and "Video format" for

DVD-RW.

OVD

QRW

DVD-RW

12cm, single-sided, single layer disc

Approx. max. recording time (SEP mode):

600 minutes (4.7GB)

DVD

R4.7

DVD-R

12cm, single-sided, single layer disc

Approx. max. recording time (SEP mode):

600 minutes (4.7GB)

AboutVideo mode and VR (Video Recording)

mode

Video mode is the same recording format as DVD-

Video discs purchased locally, so that you can play in

most DVD players.To play in other DVD players,

you will need to finalize (see page 39). Unless final-

ized, you can play, record additionally or edit discs

recorded in Video mode with this unit.

VR (Video Recording) mode is a basic recording

format for DVD-RW.You can record and edit

repeatedly.

DVD players with RW

_O_AT_J_are capable of playing

DVD-RW recorded in VR mode.

Video mode Playing, limited recording,

limited editing

DVD-RW VR mode Playing, recording,

Original/Playlist editing

Video mode

R4.7

DVD-R

Playing, limited recording,

limited editing

Recording speed

You can select a recording speed among 6 options,

and the recording time will depend on the record-

ing speed you select as follows.

XP (I H) 60 rain __

SP (2H) 120rain __

LP (4H) 240 rain _

EP (6H) 360 rain _

SLP (8H) 480 rain _

SEP (10H) 600 min "_

*This table is designed for a new single-sided 12cm

disc as the standard.The recording time are esti-

mates and actual recording time may differ.

*The audio and video quality is getting poorer as

the recording time becomes longer.

Restrictions on recording

You cannot record copy-protected video using this

unit. Copy-protected video includes DVD-Video

discs and some satellite broadcasts.

If copy-protected material is encountered during a

recording, recording will pause or stop automatically

and an error message will be displayed on-screen.

Video that is "copy-once only" can only be recorded

using a DVD-RW disc in VR mode with CPRM (see

below).

When recording aTV broadcast or through an

external input, you can display copy control informa-

tion on screen.

What is "CPRM"?

CPRM is a copy protection system with scram-

ble system regarding the recording of "copy

once" broadcast programs. CPRM stands for

Content Protection for Recordable Media.

This unit is CPRM compatible, which means

that you can record copy-once broadcast pro-

grams, but you cannot then make a copy of

those recordings. CPRM recordings can only be

made on DVD-RW discs formatted in VR

mode, and CPRM recordings can only be played

on players that are specifically compatible with

CPRM.

Recording >

Information on copy control

Some satellite broadcasts include copy-protected

information. For recording these, refer to the fol-

lowing.

VR mode

DVD-RW

ver.1.0

ver.1.1

ver.1.1 CPRM

compatible

Video mode

DVD-RW

ver.1.1

ver.1.1 CPRM

compatible

Video mode

DVD-R

ver.2.0

"_ Recordable

"_ Recordable only for DVD-RW ver.l.1 compatible

with CPRM

-- Not Recordable

Making discs playable in other DVD

player {Finalize)

You will need to finalize discs when in the following:

- when playing DVD-R/RW (Video mode) recorded

with this unit in other DVD players.

- when DVD-RW (VR mode) recorded with this

unit fails to be played in other RW compatible DVD

players.

•Once DVD-R/RW (Video mode) is finalized, you

cannot record additionally or edit.

• You can record additionally to or edit DVD-RW

(VR mode), which is finalized with this unit.

• Be sure to finalize discs recorded with this unit by

using this unit.

• Title menu will be created automatically in DVD-

R/RW (Video mode) finalized with this unit.

To play in other DVD players, finalize discs recorded

from this unit with the following condition.

DVD-R

vet.2.0 Video mode

DVD-RW

ver.1.1

ver.l.1 CPRM compatible Video mode

............................................

•The audio and video quality is getting poorer as

the Recording time becomes longer.

• This unit cannot record CD-R or CD-RW discs.

• DVD-R/RW and CD-R/RW discs recorded using

a personal computer or a DVD or CD recorder

may not play if the disc is damaged or dirty, or if

there is dirt of condensation on the unit's lens.

• If you record a disc using a personal computer,

even if it is recorded in a compatible format,

there are cases in which it may not play because

of the settings of the application software used

to create the disc. (Check with the software pub-

lisher for more detailed information.)

iiii!,ilili_iiii_i_iiiiiiiiil

Recording

Setdn_ for the recordin_ format to a blank disc

When inserting a blank disc, the

unit starts to initialize the blank

disc.

After that, You can record to the

disc with the recording format

selected in SETUP menu.

You are allowed to set a specified

time for chapter marks.

,lllllllllllllllllllllllllllllllllle

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

Setup Menu

11111111111111111111111111111111,

Select SETUP using _1 /I_

buttons, then press ENTER

button.

SETUP menu will appear.

eelelelelelelelelelelelelelelelelele

Select "Recording" using • /

•/_1 /I_ buttons, then press

ENTER button.

Recording menu will appear.

llllllllllllllllllllllllllllllllo

Select "DVD-RW Recording

Format" using •/•buttons,

then press ENTER button.

Option window will appear.

Video mode has been selected as

the default.

11111111111111111111111111111111,

Select "Video mode" or "VR

mode" using •/•buttons,

then press ENTER button.

The recording mode will be set.

AUDIO OFEF_LOSE

REC SPEED

.@/: ABC DEF

@@@

PQBS TUV WXYZ VIDEO_V

SPACE SLOW

0 0

DLSpLAy VCR DVD PAUSE

CLEAR/C-RESETZOOM SKIP SKIP

--2

Note

eelleelleeemeeemeeemeeemeeemeee

• When inserting a blank

DVD+R or DVD+RW disc,

the error message ("Disc

Error") will appear.This unit is

not compatible with a

DVD+R/RW disc.

• If using a DVD-RW (vet 1.0)

disc, recording will start in VR

mode even you choose video

mode in SETUP menu.

Recording

leleleleleleleleleleleleleleleleo

Select "Auto Chapter" using

•/•buttons, then press

ENTER button.

Option window will appear.

"10 minutes" has been selected as

the default.

leleleleleleleleleleleleleleleleo

Select a desired time option

using • /•buttons, then

press ENTER button.

Chapter marks will be put as you

specified.

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIQ

Press SETUP button to exit

SETUP menu.

•The time for chapter marks isI

Recording

Reformatting a disc

If you are using a DVD-RW disc,

by default it will beVideo mode.

You can change this toVR mode

from SETUP menu.

oelelelelelelelelelelelelelelelelell

Select "Yes" using _1 /I_ but-

tons, then press ENTER but-

ton.

.................................... Option window will appear.

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

*VR mode only

oelelelelelelelelelelelelelelelelell

Select "DISC" using _1 /I_ but-

tons, then press ENTER button.

DISC menu will appear.

Formatting will start.

PQBS TUV W):yz VIDE0_V

QQQ_

SPACE SLOW

c_ 0

D_pLAy VCR DVD PAUSE

G@D

00_@

CLEAt/C-!ESET ZOOM SKIP SKiP

_iII_" c=s=_P

OO 4

*VR mode only

IIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOo

Select "Format" using •/•

buttons, then press ENTER

button.

Option window will appear.

lllllllllllllllllllllllllllllllllo

Formatting is complete.

100% will be indicated.

*VR mode only

Note

,oeeloeeloeeloeeloeeloeo.eoolol

•When you reformat the disc,

the contents of the disc will

be erased.

• If you want to cancel format

at step 5, select"No".

Recording )

Follow the steps below to record

TV programs.

First:

ollllllllllllllllllllllllllllllllllo

Turn on the unit and load a

recordable disc.

Make sure that the TV input is set

on the unit.

Select a recording speed

using REC SPEED button.

i_ iiiiiiiiiiiiiiiiii

Refer to "Recording speed" on

page 26.

Make sure that the recording

format is set to the desired

mode.

Refer to "Formatting a disc" on

pages 28-30.

When a DVD-RW disc is

loaded:

You can chooseVideo mode or

VR mode from SETUP menu.

"Video mode" has been selected

as the default. Refer to "Settings

for the recording format to a

blank disc" on pages 28-29.

When a DVD-R disc is loaded:

DVD-R discs will always be in

Video mode.

l_olololololololololololololololol.

Select a desired channel to

record using CH •/•but-

tons or number buttons.

i ldl i iiiiiiiiiiiiill _i

iil ii ii ii ii ii ii ii ii ii ii ii ii ii ii iili

iii iiiiiiiii ii

olololololololololololololololol.

Press REC/OTR button to

start recording.

• marl< will be displayed for 5

seconds.

To pause the recording, press

PAUSEI I button. Press REC/OTR

button or PAUSEI I button to

restart the recording.

16111111111111111111111111111111111o

Press STOP • button to stop

the recording.

Q 2

_ _ _ _RECMONITOR _ _

M_T T_II e 2

OOQ@

CLEAE/tIEfT ZOOM SKIP SKIP

_00_

%_" cMskip

--5

........................

•Recording starts immediately

and continues until the disc is

full or you stop recording.

• When the clock setting has

not been made, the space for

a date and time of title names

in the original or playlist will

be blank.

• You cannot mix two formats

on one DVD-RW disc.

When you load a disc once

recorded before, the record-

ing format cannot be changed

even if you change it in

SETUP menu.

• You cannot change the

recording speed during the

REC pause mode.

• You can change a channel

during the REC pause mode.

iiiii'W!!iii

!ii!iiii_!_iliii

iili;ili:iiiiil

ii!i]i!;_i

Recording _>

Checkin_ the recordin_ picture quality

You can confirm the recording pic-

ture quality with the recording

speed you have selected before

attempting to record to a DVD disc.

First: I

eeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeao

While the unit is in STOP or

REC with a DVD disc to

record inserted, press REC

MONITOR button.

The TV program will be on the

screen in the recording picture

quality with the recording speed

you have selected.

iii!_ii_i_ill!_iii!i:iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

If you want to change the

recording speed, press REC

SPEED button repeatedly.

The recording speed will be

changed as you press the button

as shown. Refer to "Recording

speed" on page 26.

•You cannot change the record-

ing speed during recording.

XP ---_ SP ---_ LP

SEP _SLP_,_ EP

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOl

Press REC MONITOR button

again to exit.

f0_

G_6_

GHI JKL MNO

_)QQ

OPQRS _ O _WXYZ VIDEOF£V

SPACE SLOW

0 Q

_D_SPLAy_ __DVD PAUSE

R TII_ERpRO,

REC_NITOR E_ER

-_D Q _ Q

{_ENIULLST TOP MEI_U RETURN

0 0 <_>@

CLEAR£-RESETZOOM SKIP SKIP

Note

You cannot check the record-]

/ing sound quality with the I

L Rec monitor function. J

Recording

i ii! i

This is a simple way to set the

recording time in blocks of 30

minutes. Check that the disc you

are recording onto has enough

space for the time you set.

When the recording finishes the

recorder automatically goes into

standby.

First: !_

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Turn on the unit and load a

recordable disc.

Make sure that the TV input is set

on the unit.

olililililililililililililililille

Select arecording speed

using REC SPEED button.

Refer to "Recording speed" on

page 26.

ilelelelelelelelelelelelelelelelelel

Make sure that the recording

format is set to the desired

mode.

Refer to "Formatting a disc" on

pages 28-30.

When a DVD-RW disc is

loaded:

You can chooseVideo mode or

VR mode from SETUP menu.

"Video mode" has been selected

as the default. Refer to pages 28-

29 "Settings for the recording for-

mat to a blank disc."

When a DVD-R disc is loaded:

DVD-R discs will always be in

Video mode.

l_elelelelelelelelelelelelelelelele

Select a desired channel to

record using CH •/•but-

tons or number buttons.

lllllllllllllllllllllllllllllllle

Press REC/OTR button, then

press REC/OTR button

repeatedly until a desired

recording time (30 minutes

to 8 hours) appears on the TV

screen,

Recording will start.

/0:30_

(Normal iecording) hOOil

8:00 7:30

When reaches the specified time,

the unit will be turned off auto-

matically.

To cancel the one-touch timer

recording within the specified

time, press STOP • button.

D AUDIO OP_NtCLOSE

PQRS

QQO_

SPACE SLOW

0 0

D_P_Y VCR DVD _USE

®@e

REC/OTRSErOp TI_ERP_G.

RECMONITOR ENTER

OQ_O

_ENL_USTTOPMENU RETURN

C[_I_RES[TZOOM SKIP SKIP

_[_" cMSKBP

-4

•.N..o.t.e.........................

•The unit will be turned off

automatically under the con-

ditions following.

I)No space remained on the

disc.

2)When a power failure

occurs.

• If OTR is finished in DVD

during playback or REC mode

in VCR, the DVD will be in

STOP mode and theVCR

keeps the current mode.

Recording

You can program the unit to record

up to 8programs, up to a year in

advance. Daily or weekly program

recordings are also available.

•Be sure to set the clock before

making a timer programming.

• Insert a recordable disc or a

..._.p.._.._.LLh.._._._._tY.t_.b.•............

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

oeOeOeOeOeOeOeOeOeOeOeOeOeOeOeOeOeOO

Select SETUP using _!l /I_

buttons, then press ENTER

button.

SETUP menu will appear.

olOlOlOlOlOlOlOlOlOlOlOlOlOlOlOlOlOo

Select "Recording" using • /

•/<1 /I_ buttons, then press

ENTER button.

Recording menu will appear.

ellllllllllllllllllllllllllllllllllo

Select "Timer Programming"

using • /•buttons, then

press ENTER button.

Timer Programming list will

appear.

Setup > Recording > Timer Programming

15111111111111111111111111111111111o

Select the program which is

not set up using • /•but-

tons, then press ENTER but-

ton.

111111111111111111111111111111111,

Enter the date using • /•

buttons, then press I_ button.

Setup > Recording > Timer Programming

You can choose the timer I

programming menu by press- I

ingTIMER PROG. button. In

this case, continue with step 5.

....._vo/F

C_ C_ _ Q

SE_" CM SKIP

--2

e.g.January Ist

JAN/O i

:_T!!!::;I!::!:I

Daily

NON-SAT

NON-FR|

SAT

FR|

DEC/31

llllllllllllllllllllllllllllllllo

Enter the time to start and

to end using •/•buttons,

then press I_ button.

Setup > Recording > Timer Programming

When pressing • button at the

current date, timer recording

de wi change as f• ows.

Note

•If you have not set the

clock yet:

Aclock setting window will

appear after step 4. Continue

with the step 4 in "Auto

Clock Setting" on page 21 or

"Manual Clock Setting" on

page 22 before making a

timer programming.

•Press <1 or I_ buttons to

move the cursor to the left

and the right in the timer

programming menu.

Recording

Select the channel number to

record using • /• buttons,

then press I_ button.

Setup > Recording > Timer Programming

To record from external input, L1

or L2.

loeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe,

Select a recording media

using •/•buttons, then

press I_ button.

Setup > Recording > Timer Programming

•To record on to a tape, selectVCR.

• To record on to a disc, select DVD.

eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select a recording speed

using •/•buttons.

Setup > Recording > Timer Programming

Refer to "Recording speed" on page

26 for DVD or page 94 forVCR.

eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Press ENTER button when all

information required is

entered.

Your program setting will be

stored.

• To set another program, repeat

steps 5 to II.

:.To.._x£.p._._._._..S.ET.U.P..b.._._._o._......

Press POWER button to turn off.

[] indicator will appear on the

front display.

12:

_QQJKL MNO

QOQ

SPACE

G_D

CL_/_RESETZOOm SKiP SKIP

',S_ cMsKiP

W0E0_V

SLOW

(©

•Note

,oooeoooeoooeoooeoooeoooeoooeo_

• After step 12,the unit will be

turned on automatically 2

minutes (ForVCR recording,

I0 seconds) in advance of the

recording time to start and

waits to start.Then the

recording will start at the

recording time you set.

"i.................................."_1".................................1-

Press POWER button so that

[] indicator disappear from

the front display.

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

To clear the timer programming,

select your desired program

using •/•buttons, then press

CLEAR/C-RESET button.

Press TIMER PROG. button.

Timer Programming list will appear.

To correct the timer program-

ming, select your desired pro-

gram using •/•buttons, then

press ENTER button.

Next, correct the timer programming

using •/•/41/1_ buttons.

Finally, press ENTER button again.

Setup > Recording > Timer Programming

PressTIMER PROG. button to exit.

eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Check the information on the I_

list you will need.

Press POWER button to return

to the timer standby mode.

RECSPEED AUDIO OP__LOSE

A_¢ DEP

PQRS TUV WXYZ VIDEO_V

SPACE SLOW

D_Y VCR DVO _USE

0 0

•.N..o.t.e.........................

• Press TIMER PROG. button to

check the timer programming

in process.

When the timer recording is

proceeding, that program will

be red highlighted. In this case,

you cannot select any other

program.

Press STOP • button to stop the disc recording or STOP/EJECT • A to

stop the tape recording on the front panel of the main unit. STOP • but-

ton on the remote control is not effective.

Recording

Hints for timer recording

•If there is a power failure or this unit hasbeen unplugged for more than 30 seconds,the clock setting and all timer settings will be lost.

• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.

Please insert a recordable disc.

• If a tape with a record tab is not in the cassette compartment, theVCR indicator on the front panel flashes and timer

recording cannot be performed. Please insert a recordable tape.

• When all the timer recording is completed, the _ indicator flashes.To play or eject the recorded disc (or the tape),

press POWER button first, and then press PLAY I_ or OPEN/CLOSE A (or STOP/EJECT • _) button.

• The timer recording is not performed in DVD andVCR at the same time. If you set two programmings with the same

channel and time both in DVD and VCR, the programming that has priority will be recorded.

• During timer recording or timer standby ( _ indicator is on the front display), any operations on the unit will not be

available.To make these operations available, cancel the timer recording or timer standby first ( [_ indicator disappears).

• To cancel the timer standby mode, press POWER button.

The priority of overlapped settings

This unit records the programs according to priority if the timer programmings are overlapped.The timer programming

set previously has priority.

A timer recording of lower priority will be canceled, start from the middle, or stop on the way.

Check the overlapped timer programmings and change the priority if necessary.

•Aprogramming set previously has priority

[] When the starting time is same:

A program set previously (PROG.A) haspriority.

[] When some programming have been

made at the end time of the

programming currently being recorded:

A program set previously (PROG. B) has priority.

PROG.A _iii_iii

• When the recording time is partially overlapped:

PROG. A will start after PROG. B is complete to be recorded.

• When the recording time is entirely overlapped:

PROG. A will not be recorded.

• When the end time of the programming currently being recorded and the starting time

of the one to be recorded sequentially are same:

The first 20-90 seconds of the programming to be recorded sequentially will be cut off.

The first 20-90 seconds will be cut off.

Note:

After finishing the timer

recording in DVD, other

timer programmings

cannot be performed for

a while.

Recording

Connection to an external source

Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).

S-VIDEO input is useful only in DVD mode.

OUTPUT

SVIDEO VIDEOAUDI_

S-VideoI VideoI IAudio

cable I cable | I cable

Front of this unit

1. Press SETUP button to display SETUP/DISC

menu.

2. Select "SETUP" using _1 /I_ buttons, then

press ENTER button.

3. Select "SelectVideo", then press ENTER

button.

4. Select "L2 (Front)", then press ENTER but-

ton.

5. Select the input jack type to connect, then

press ENTER button.

If you want to use S-VIDEO INPUT, select"S-Video In".

If you want to useVIDEO INPUT (Composite),

select "Video In".

Rear of this unit

1. Press SETUP button to display SETUP/DISC

menu.

2. Select "SETUP" using _1/I_ buttons, then

press ENTER button.

3. Select "Select Video", then press ENTER

button.

4. Select "L1 (Rear)", then press ENTER but-

ton.

5. Select the input jack type to connect, then

press ENTER button.

If you want to use S-VIDEO INPUT, select"S-Video In".

If you want to useVIDEO INPUT (Composite),

select "Video In".

Recording

Recordin_ from an external source

Before recording from an external source, see the instruction for the connection on page 37.

1. Turn the TV and the unit on, and be sure to select the input

of the TV to which the unit is connected.

2. When you want to record to the disc: Press:

Press OPEN/CLOSE _ button to open the disc tray, then

place the disc to record properly.

When you want to record to the tape: Press:

Insert the tape with a safety tab into the cassette compart-

ment.

3. Select the input of the unit which the external equipment is

connected. (L2 or L1)

•To use the input jacks on the back of this unit, select "LI" position by

pressing [0],[0],[I] on the remote control or the CH • /• buttons.

•To use the input jacks on the front of this unit, select "L2" position

by pressing [0],[0],[2] on the remote control or the CH • /• but-

tons.

4. Select a recording speed using REC SPEED button. Refer to

"Recording speed" on page 26 for DVD or page 94 forVCR.

,_i: ABC DEF

QQQ,Q

DLSFLAy VCR DVD PAUSE

® _ ® <£>

RECION SETUP TI_ERPIOG

REC _RITOR ENTER

0 GB (ii) C_

IENU/LLST TOP IEIU RETUIN

OOC_@

CL_AI_.I_S_ZOOM SKiP SKIP

XP ---_ SP---_ LP

SEP _-- SLP _-- EP

SP __ SLP

DVD mode VCR mode

--2

-3

5. Press REC/OTR button on the unit to start recording.

6. Press PLAY button on the external source to record from.

7. For disc:

Press STOP •button on the unit to stop recording.

For tape:

Press STOP/EJECT •___button on the unit to stop record-

ing.

Recording >

i ii !

You can copy a DVD disc to a

videotape or copy a videotape to

a DVD disc.This function will be

possible only if the DVD disc or

the tape is not copy protected.

Before starting this function, pre-

pare for the recording on the

DVD-R/RW disc or the videotape.

Refer to pages 26-42, 94.

Make sure:

• Insert a disc and a tape with a

safety tab.

Note for recording to a tape:

• The tape's record tab is intact.

• The videotape is long enough to

record the DVD disc.

Note for recording to a disc:

• The DVD disc is satisfied with

the recording status. Refer to

pages 26-42.

oeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeo

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

Setup Menu

ooooooooooooooooooooooooooooooooe

Select SETUP using 4/I_

buttons, then press ENTER

button.

SETUP menu will appear.

ooooooooooooooooooooooooooooooooe

Select "Recording" using • /

•/4/I_ buttons, then press

ENTER button.

Recording menu will appear.

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select "Dubbing Mode" using

•/•buttons, then press

ENTER button.

Option window will appear.

-2

•Note

For VCR to DVD duplication:

• After startVCR to DVD dupli-

cation, the picture may be dis-

torted because of the auto

tracking function.

This in not a malfunction. Be

advised that playback the tape

until the picture is stabilized,

then set the starting point

which you wish to start

recording, and startVCR to

DVD duplication.

iiiii'_:_iii'!!iii:¸

!ii_iiiii!_iiiiiiii

iiii!,ilili_ili:i_iiiiiiiiil

ii!iii!:ii!;_i

Instructions continue on page 40.

Recording

eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

5-a

Select "VCR _ DVD" using •

/•buttons, then press

ENTER button.

Dubbing Mode

6-a

Press SETUP button to exit

SETUP menu.

Make sure to select a recording

speed using REC SPEED button.

Press:

.............................

Press PLAY I_ button on the

unit, and then press PAUSE

button at the point you wish

to start recording.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

8-a

Press DUBBING button on

the front of the unit.

VCR to DVD duplication will start.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

9-a

Press STOP •button on the

unit or STOP •button on

the remote control to stop

the recording.

.oeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeo

5-b

Select "VCR _ DVD" using •

/•buttons, then press

ENTER button.

ooeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeo

6-b

Press SETUP button to exit

SETUP menu.

Press:

Make sure to select a recording

speed using REC SPEED button.

Press:

leoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoo

7-b

Press PLAY I_ button on the

unit, and then press PAUSE

button at the point you wish

to start recording.

"li':'6.............................

Press DUBBING button on

the front of the unit.

DVD toVCR duplication will start.

"€)':'6.............................

Press STOP/EJECT • _ but-

ton on the unit or STOP •

button on the remote control

to stop the recording.

7-a 7-b

9-b 8-a 9-a

8-b

Note

Jeeooeeooeeooeeooeeooeeooeeooee

•When you turn off the unit

after set the Dubbing Mode

to VCR4-DVD ,the setting

will be set to VCR-I'DVD

automatically.

• Dubbing Mode is available

only if the tape or disc is not

copy protected.

• You cannot change the output

mode duringVCR to DVD or

DVD toVCR duplication.

For VCR to DVD duplication:

• The playback sound mode is

followed by the setting of

VCR playback sound mode on

page 96. Set the playback

sound mode to which you

wish to record to the DVD.

Recording

You will need to finalize the discs

recorded in Video mode to play in

other DVD players.

Finalizing discs in Video mode

automatically create title menus.

.1111111111111111111111111111111111.

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

eleleleleleleleleleleleleleleleleo

Select "DISC" using <1 /I_

buttons, then press ENTER

button.

DISC menu will appear.

Video mode:

...................

Select "Finalize" using • /•

buttons, then press ENTER

button.

Option window will appear.

.o ly....................

Select "Yes" using <1 /I_ but-

tons, then press ENTER but-

ton.

Finalizing will start.

ii_ i i ii _i_ i _{

!!!_!i_i_ii@iiiiii(!ii_ii_ii_i_i{_ii_i_!@iiiiiiiiiiiiiiiii!!ii

To cancelfinalizing, press STOP •

button.

Select "Yes", then press

ENTER button.

Finalizing is cancelled, then the

unit will be in stop mode.

olololololololololololololololol.

Finalizing is complete.

POWER RECS?EED AUDIO 0PE_CL0$E

ABC DEF

PQRS TUV WXyZ VIDEO_V

QQO_

SPACE SLOW

@ 0

SKIn

_B_" cMskip

--2

•Note

•Once you have finalized adisc

recorded inVideo mode, you

cannot edit or record any-

thing else on that disc.

AVR mode disc can still be

recorded and edited on this

unit even after finalizing.

• When you insert a DVD-RW

disc finalized with this unit,

"Undo Finalize" will appear

instead of "Finalize".

To release the finalizing for

the disc, select "Undo

Finalize" at step 3.

• If _) appear when pressing

STOP button, you cannot can-

cel finalizing because the final-

izing has been in certain

progress.

When selecting "No" and

press ENTER or RETURN

button, finalizing will be con-

tinued.

You cannot cancel finalizing

the DVD-R disc when it has

been started.

iiiii':_i;'!!iii;¸

!ii_i3iii,ii

iiii!_ili;ili;i_iiiiiiiiil

ii!iii!:ii;_i

Recording

ollllllllllllllllllllllllllllllllllo

To prevent accidental recording, 3

editing, or erasing the titles, you Select "Disc Protect OFF --)

can protect them from DISC ON" using • /• buttons,

menu. then press ENTER button.

.................................... Option window will appear.

Press SETUP button to dis-

play SETUP/DISC menu.

SETUP/DISC menu will appear.

Screen:

llllllllllllllllllllllllllllllllo

Select "DISC" using _1 /I_

buttons, then press ENTER

button.

DISC menu will appear.

11111111111111111111111111111111o

Select "Yes" using _1 /I_ but-

tons, then press ENTER but-

ton.

A disc will be protected.

58%

Wfitl_ t0 Disc _==------"=---- ..... I

QQ,_X

®06

PORS TUV WXYZ VIDE_V

QQO_

SPACE $L_

O @

_$PL_ VCR DVD PAUSE

G@e

S_N" CM SKIP

GO 4

Playing discs

Before you attempt to play DVD discs, read the following information.

Playable discs

This unit is compatible to play the following discs.

To play a DVD, make sure that it meets the require-

ments for Region Codes and Color Systems as

described below. Discs that have the following Iogos

will play on the unit. Other Disc types are not guar-

anteed to play.

DVDVIDEO

VIDEO

DVD-RW (VIDEO/VR FORMAT)

DVD-R (VIDEO FORMAT)

R4.7

CD-DA (AUDIO CD) I_B°_

DIGITAL AUDIO

CD-R (CD-DA FORMAT, MP3 files) ['_B°_

Ii_rti3"ii_l'l_

CD-RW (CD-DA FORMAT, MP3 files) uI_U_JLL9

Color systems

DVDs are recorded in different color systems

throughout the world.The most common color sys-

tems are NTSC (which is used primarily in the

United States and Canada), PAL, and SECAM.

This unit uses NTSC, so DVDs you play must be

recorded in the NTSC system.You cannot play

DVDs recorded in other color system.

Region codes

This unit has been designed to play DVD discs with

Region One (1). DVDs must be labeled for ALL

regions or for Region 1 in order to play on the unit.

You cannot play DVDs that are labeled for other

regions. Look for the symbols below on your DVDs.

If these region symbols do not appear on your

DVD, you cannot play the DVD in this unit.

The number inside the globe refers to region of the

world. Region 1represents the United States,

Canada, Bermuda, the U.S.Virgin Islands, and small

regions near Australia.

A DVD labeled for a specific region can only play on

the unit with the same region code.

Hint for DVD playback

The contents of DVD disc are generally divided into

some titles.Titles may be further subdivided into

chapters,

Start•Ree. Stop/vSurt StopRee.

Title 1 i Title 2 i

Di Di

iChapter1i Chapter2iChapter3i i Chapter1iChapter2i

; ' B'i_ 'P'i

Guide to displays

First:

Press DISPLAY button to call up

the display menu.This menu will

give you the information on the

playing disc. Some operations are

available while disc is playing.

1. Indicates a disc type and a

format mode.

2. Indicates a recording speed

and possible recording time.

3. Indicates a current channel

number.

4. Indicates a title number, chap-

ter number, and the time

elapsed of disc play.

5. Each icon means:

: Search

:Audio

: Subtitle

:Angle (exceptVR mode)

: Repeat

:Marker

: Noise Reduction

:Zoom

Playing discs

Playback

ollllllllllllllllllllllllllllllllllo

Press POWER button, then

press DVD button.

When you are playing aDVD, turn

theTV on and be sure to select

the input to which the unit is con-

nected.

llllllllllllllllllllllllllllllllo

Press OPEN/CLOSE _but-

ton to open the disc tray.

The disc tray will open.

tiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiio

Place the disc onto the disc

tray with its label facing up

and make sure to align the

disc to the disc tray guide.

tray

guide

llllllllllllllllllllllllllllllllo

PressTOP MENU button to

display the title menu.

You can change "Original" or

"Playlist" of VR mode using

MENU /LIST button.

Video mode:

VR mode:

tMENU /LIST button

o5111111111111111111111111111111111o

Select a desired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Playback will start.

llllllllllllllllllllllllllllllllo

Press STOP • button to stop

playback.

To eject the disc, press

OPEN/CLOSE _ button to open

the disc tray, then remove the disc

before turning the unit off.

RECSPEED AUDIO OPE_CLOSE

ABD

PORS TUV WXYZ VIDEO/TV

QO@_

SPACE SLOW

@ @

DISpLAy VCR DVD PAUSE

--5

Note

" i" "

and DVD-RW (Video mode)

discs which are already final-

ized, a title list will be dis-

played instead of thumbnails.

•You can resume play from

where you stopped playing

the disc. (Resume play)

Refer to page 46 for details

about resume play.

• Some discs may start playing

automatically.

Playing discs

Press POWER button, then

press DVD button.

When you are playing a DVD or

an audio CD, turn the TV on and

be sure to select the input to

which the unit is connected.

Press OPEN/CLOSE _but-

ton to open the disc tray.

The disc tray will open.

oleleleleleleleleleleleleleleleleleo

Place the disc onto the disc

tray with its label facing up

and make sure to align the

disc to the disc tray guide.

If you are playing a DVD-Video

disc, a menu may appear.

Refer to pages 46-47 for details

about a disc menu.

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Press STOP •button to stop

playing.

•Note......................... ]

•Some discs may start playing

• automatically.

For MP3 playback

eo•e®e®e®e®e®e®e®e®e®e®e®e®e®e®e®e®e

In stop mode, pressTOP HENU

button to callup the HP3 menu.

•Press _l button or RETURN

button to the previous hierarchy.

Press STOP • button to return

to the first item.

Hints for HP3 files:

• Folders are known as Groups,

files are known as Tracks.

• Folders are accompanied by 11_ icon.

• To exit the menu, press TOP

MENU button again.

OO®OQmQmQmQmQmQmQmQmQmQm__O

Press _/_ buttons to selecta

desired folder(group) or track,

then press ENTER button.

When selectin_track:

Playback will start.

When selecting the folder:

The files in folder will appear.

Press _ or V button to select the

track or folder you want, then

press ENTER button.

• IP3 files are accompanied by J_ icon.

Reproduction will start from the

selected track and go to the

next one in turn.

• Thesystemcanrecognizeupto 255

groups(or folders)and upto 255tracks.

• The name of group and track can

be displayed in up to 32 charac-

ters. Unrecognizable characters

will be replaced with asterisks.

• If there are no files in the folder,

"No Files" will be displayed.

This unit recommends the files

recorded under the following cir-

cumstances:

• Samplingfrequency:44.IkHz or 48kHz.

•Constant bit rate: I I2kbps -320kbps.

,@/:

JKL MNO

PORS TUV WXYZ VIDEO_V

0 CO G) C@

SPACE SLOW

DISPLAY VCR DVD PAUSE

N.o. .e.........................

• The audio source of MP3 files

cannot be recorded as digital

sound by an MD or DAT deck.

• Files whole extension is other

than ".mp3 (MP3)" will not be

listed in the MP3 menu.

•Some unplayable folders or

tracks may be listed in the

MP3 menu due to the

recording status.

Playing discs }

Playin_ discs usin_ the disc menu

A DVD disc contains a disc menu

that describes the contents or

allows you to customize the play-

back. For example, the menu may

offer choices for subtitle lan-

guages, special features, or chapter

selection.

Sometimes these are displayed

automatically when you start play-

back, otherwise only appear when

you press MENU /LIST button.

First: [

************************************

Press MENU /LIST button.

The DVD main menu will appear.

If the feature is not available,

may appear on the TV screen.

Select an item using •/•/

_1 /I_ buttons, then press

ENTER button to confirm.

Continue this step to set up all

the features you want or to start

playing the disc from the menu.

MENU /LIST button:

Displays a DVD disc menu which

varies with the disc and may be

the same as the 'Title menu.'

•/•/_1 /I_ buttons:

Moves the cursor around screen.

Enter button:

Selects the currently highlighted

menu option.

Number buttons:

Selects a numbered menu option

(some discs only). (Press ENTER

button after.)

.1111111111111111111111111111111111.

Press MENU /LIST button to

exit the menu.

DiSpLAy VCR DVD PAUSE

.........................1

•Menus vary among discs. /

Refer to the information /

accompanying the disc for /

details.

Playing discs

Playin_ discs usin_ the title menu

Some DVDs have a title menu,

which lists the titles available on

them. It helps you to start play-

back at a specific title.

First:

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Press TOP MENU button.

The title menu will appear.

If the feature is not available, _)

may appear on the TV screen.

ii ¸

iii_i_ ii I _

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select a title to play using the

•/•/4/I_ buttons, then

press ENTER button.

Playback will begin at the title you

selected.

TOP MENU button:

Displays the 'Title menu' of a

DVD disc which varies with the

disc.

•/•/4/I_ buttons:

Moves the cursor around screen.

Enter button:

Selects the currently highlighted

menu option.

Number buttons:

Selects a numbered menu option

(some discs only). (Press ENTER

button after.)

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

PressTOP MENU button to

exit the title menu.

•Note

eoooooooooooooooooooooooooooooe

• The TOP MENU button will

not always active with all

DVDs.

• Menus vary among discs.

Refer to the information

accompanying the disc for

details.

Playing discs

Resume play

You can resume play from where

you stopped playing the disc last.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

Press PLAY I_ button.

In a few seconds, playback will

resume from the point at which it

.................................... stopped last.You can resume play

at the same point even if you turn

off the unit.

During playback, press STOP

•button.

The resume message will appear.

Screen:

_ _ _ _ i__i_i i

i i iii ii_ i_ii ii

To cancel the resume play and

start playing the disc from the

beginning, press STOP • button

the second time while the play-

back is stopped.

RECSPEED AUDIO OPE_CLOSE

GHI JKL MNO

QQQ

PQRS TUV WXYZ VIDEOF[V

SPACE SLOW

DISP_Y VCR DVD PAUSE

G D(

REC/OT£ SETUP TIMEN££0G.

/RECMON_0R ENTER

O@_)@

/ MENU_STTOPMENU _ETURN

OO@@

CL_/_SET_ C_P @ @ZOOM SKP SKIP

io©

INote ]

e=eeeeeeeeeeeeeeeeeeeeeeeeeeeeee

For MP3 files, playback will

| resume from the beginning of [

| the track at which playback [

L was stopped. J

Fast forward /Fast reverse

During playback, press IH_ or << button.

Every time you press IH_ or << button, approximate speed will be

changed as follows.

For Audio CDs, approximate speed is fixed at x8 with sound.

For MP3 files, approximate speed is fixed at x8.

To return to the normal playback, press PLAY I_button.

RECS_ED AUDIO O_N_L_E

SPACE SLOW

Q Q

D_AY VCR DVD _USE

Note

_eeeeeeeeeeeeeeeeeeeeeeeeeeeeee

• Forward/reverse speed will be

indicated with icons as fol-

lows.

Forward (Approx. Speed)

x2: I_

x20: I_""

x40:

Reverse (Approx. Speed)

xS: I_

x20:

x40: I1_

Playing discs

Skippin_TV commercials durin_ play

You can skip TV commercials by

pressing CM SKIP button, so that

you can enjoy the recorded pro-

grams without interrupting.

elllllllllllllllllllllllllllllllllle

During playback, press CM

SKIP button.

Normal playback will start at 30

seconds ahead from the point you

press CM SKIP button.

Every time you press CM SKIP

button, searching point will be

extended by 30 seconds ahead.

You can press up to 6 times (180

seconds).

e.g. Press CM SKIP button once

(forwarding 30 seconds.)

i}ilhi}}!!{L_{II_!!i_ii_i_U__iki}i/$!ii$!ii$71

!df_i_ ii( V( }i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Playback will restart automatically.

SPACE SLOW

@ 0

DISP_Y VCR DVD PAUSE

G_D

£o2581

_2®®/

Pause

,llllllllllllllleeeeeeeeeeeeeeeeeeee

During playback, press

PAUSE I I button.

Playback will pause and sound will

be muted.

lllllllllllllllllllllllllllllllle

Press PLAY I_ button to

resume play.

ilhill ii II{F !ii :i:i:i:i:i:i:i:i:i:i:

Playing discs

Step by step playback

i i i! ! eolololololololololololololololololl

.................................... Press SKIP IHH button

1 repeatedly.

During playback, press The playback will advance one

PAUSE II button, frame (or step) at a time when

Playback will pause and sound will you press the skip button with

be muted, the sound muted.

ii ¸¸

ii__ iiii _i _i ii

ii _i ii

To play step by step back-

ward:

Press SKIP Pil4 button repeatedly.

Every time you press the button,

the playback will go backward by

one frame.

,1111111111111111111111111111111111,

Press PLAY I_ button to

resume play.

_SPACE _SLOW

I_AY vcn DVD -1

-2

Slow forward /Slow reverse play

eeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeoooeooo.

During playback, press PAUSE ! ! button, then press IH_ or 44

button.

Every time you press IH_ or 44 button, approximate speed will be

changed as follows.

To return to the normal playback, press PLAY I_ button.

JKL MNO (_

cccQ)@@

PQRS TUV WXYZ VIDEO/TV

SPACE SLOW

REC/OTR SETUP TIMERPROG

RECMONITOR EtTER

0%D %_ k%)

IENU_$T TOPIENU RETURN

O0@_D

-1

Note

oeooeeooeeooeeooeeooeeooeeooeee

•Forward/reverse speed will be

indicated with icons as fol-

lows.

Forward (Approx. Speed)

xl/16:ll_,

x I/8: I1_*

x I/2: I1_"

Reverse (Approx. Speed)

xl/16:ll_

x I/8: I1_*"

x I/4: I1_

Playing discs

Zoom

•.................................

Select a desired zoom factor

to zoom using _1 /I_ buttons, 1

1then press ENTER button.

During playback, press

ZOOM button.

Zoom menu will appear.

Screen:

There are four options

(xl.O,xl.2,xl.5 and x2.0), these

are displayed excluding the cur-

rent zoom rate.

The zoom area will be displayed.

11111111111111111111111111111111,

Select a desired zoom position

using •/•/•/•buttons, then

press ENTER button.

The zoom play will start.

Marker Setup

This feature allows you to assign

a specific point on a disc to be

called back later.

ooeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeo

During playback, press DIS-

PLAY button.

Screen for DVD:

Screen for CD:

The display menu will appear.

Screen:

i ¸¸

Select _icon using _1/I_

buttons, then press ENTER

button.

Marker setup menu will appear.

ollllollllollllollllollllollllolo

Select a desired marker num-

ber using _1 /I_ buttons.

When reaches the desired

point, press ENTER button.

lllollllollllollllollllollllolll,

To return to the marker later,

select the desired marker

number using _1 /I_ buttons,

then press ENTER button.

REO/OTR SETUP _MERP£O(

®__

s_ ca SKIP

®®

•Note.........................

•When selecting a smaller factor

than the current one, the zoom

area will not be displayed.

•To remove the zoom menu, press

ZOOM button again at step I.

•To cancelthe zoom function,

select xl.0 using •/• buttons,

then press ENTER button.

FOWER RE€SPEED AUDIO OPEF_¢LOSE

÷®0®

,: ABe

MNO

®®

®P°BS _ ®®wxYz VlDEO_V

SPACE SLOW

® ®

1- ®

®®®@_

oo )4

•Note ......

::::::::::::::::::::::: the

marker number to be cleared,

then press CLEAR/C-RESET

button.

• All markers will be erased

when you operate these opera-

tions listed below.

- Opening the disc tray.

-Turning off the power.

- Recording to a recordable

disc.

- Changing the mode between

Original and Playlist.(VR mode)

•You can marl< up to 6 points.

• s{

<_ Playing discs _>

Title/Chapter search

During playback, press SKIP

I_t button to skip the cur-

rent title or chapter and

move to the next.

The title or chapter will move

forward by one at a time.

To go back to the previous title

or chapter, press SKIP I_1_1but-

ton.The title or chapter will move

backward one title at a time.

button...

12-

During playback, press DIS-

PLAY button.

The display menu will appear, t --

Screen: |

Iooooooooooooooooooooooooooooooooooo

Select _icon using _1 /I_

buttons, then press ENTER

button.

'T' for title will be highlighted.

Title:

Enter a desired title number

to search using •/•buttons

or number buttons, then

press ENTER button.

Title search will start.

Chapter:

To move to 'C' for chapter, press

I_ button.

Enter a desired chapter num-

ber to search using •/• but-

tons or number buttons, then

press ENTER button.

Chapter search will start.

Playing discs

Track search

During playback, press SKIP

1_1_1button to skip the cur-

rent track and move to the

next.

The track will move forward one

track at a time.

To go back to the previous track,

press SKIP 144 button.The track

will move backward by one at a

time.

Using DISPLAY button

eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

During playback, press DIS-

PLAY button.

The display menu will appear.

Screen:

lllllllllllllllllllllllllllllllle

Select _icon using 4/I_

buttons, then press ENTER

button.

'T' for track will be highlighted.

lllllllllllllllllllllllllllllllle

Enter a desired track number

to search using •/•buttons

or number buttons, then

press ENTER button.

Track search will start.

Time search

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

During playback, press DIS-

PLAY button.

The display menu will appear.

Screen for DVD:

Screen forCD:

lllllllllllllllllllllllllllllllle

Select _icon using 4/I_

buttons, then press ENTER

button.

'T' for title or track will be high-

lighted.

To move to the clock icon, press

I_ button.

lllllllllllllllllllllllllllllllle

Enter a desired time to

search using •/•buttons or

number buttons, then press

ENTER button.

Time search will start.

AUDIO OPE_OLOSE

RE_ SPEED

,@I: ABC DEP

@@@

PORS TUV WXYZ VBDEOFrV

QQQ_

SPACE SLOW

0 Q

D_PLAY VCR DVD PAUSE

_EC/OTR SETUP TIMERp_OG.

® --2

oooeoooeoooeoooeoooeoooeoooeo_

Time search function is avail-

able only in the same track or I

•title. J

Playing discs

Repeat play

.eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.

During playback, press DIS-

PLAY button.

The display menu will appear.

11111111111111111111111111111111 J

Select icon using _1/1_ but-

tons, then press ENTER button.

Repeat menu will appear.

Screen:

Title:

The current title will be played

repeatedly. (DVD only)

Chapter:

The current chapter will be played

repeatedly. (DVD only)

All:

The current disc will be played

repeatedly. (CD, MP3, DVD-RW

(VR mode) only)

A-B:

The A-B point will be played

repeatedly.

When pressing ENTER button

while A-B is highlighted, the start-

ing point (A) will be decided.

Press ENTER button again to

select the ending point (B).

ollllllllllllllllllllllllllllllllllo

Select a desired option to

repeat using •/•buttons,

then press ENTER button.

The selected repeat play will start.

Track:

The current track will be played

repeatedly. (CD, MP3 only)

Group:

The current group will be played

repeatedly. (MP3 only)

•Note

oeemeeemeeemeeemoeeooeeooeeooeo

• The A-B Repeat playback can

only be set with in the cur-

rent title (for DVDs), or cur-

rent track (for Audio CDs).

• To cancel the repeat playback,

select OFF at step 2.

• You cannot select "Group"

during the random playback

of MP3 files.

Random play

With this function, you can play a

disc randomly instead of playing in

the original order.

First:

Jeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaea J

Press SETUP button to dis-

play SETUP/CD menu.

SETUP/CD menu will appear.

Screen:

Iollllollllollllollllollllolllloo

Select "CD" using _1 /I_ but-

tons, then press ENTER but-

ton.

CD Playback Mocle menu will

appear.

Setup Menu

ollollllollllollllollllollllollllolo

Select "Random Play" using

•/•buttons, then press

ENTER button.

Random playback will start.

PQRS TUV wxYz VIDEO/TV

<!> 0 Q _

SPACE SLOW

DLSpLAy VCR DVD PAUSE

0 01_1@

Ct_/C-RE_TZOOM SKIP SKIP

Note ]

To cancel random playback,

| press STOP • button twice

[, during random playback.

Playing discs

Prosram play

)

You can program the disc to play

in your desired order.

First:

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Press SETUP button to dis-

play SETUP/CD menu.

SETUP/CD menu will appear.

Screen:

llllllllllllllllllllllllllllllllo

Select "CD" using _1 /I_ but-

tons, then press ENTER but-

ton.

CD Playback Mode menu will

appear.

elelelelelelelelelelelelelelelele

Select "Program Play" using

•/•buttons, then press

ENTER button.

Program play list will appear.

lllllllllllllllllllllllllllllllle

Select a desired track using •

/•buttons, then press

ENTER button or I_ button.

Acursor will move to the next.

CD Playback Mode > Program Play

POWER RE€SPEED AUDIO OPEN_¢LO$t

C_tE_T ZOO_ SKIP SKI_

olololololololololololololololole

Press PLAY _ button to start

program playback.

Program playback will start.

•.N.o .e.........................

• To erase tracks you selected,

press CLEAR/C-RESET but-

ton.

• You can make program set-

tings up to 50.

• To cancel program playback,

press STOP •button twice

during program playback.

• You may also select a desired

track using Number buttons

at step 4.

Playing discs

You can select an audio and video format as you prefer depending on

the contents of the disc you are playing.

Switching audio soundtrack

When playing a DVD-Video disc

recorded with two or more

soundtracks (these are often in

different languages), you can

switch between them anytime

during playback.

On DVD-RW discs recorded in

VR mode, you can switch to main

(k), sub audio (R) or a mix of

both (k/R).

elllllllllllllllllllllllllllllllllle

During playback, press DIS-

PLAY button.

The display menu will appear.

Screen:

<DVD-RWVR mode>

elllllllllllllllllllllllllllllllllll

Select adesired audio sound-

track using •/•buttons,

then press ENTER button.

<DVD-Video>

Audio soundtrack will switch.

<DVD-RWVR mode>

L_ ¸

_ ..... 0......

........OG

.@/: ABC DEF

@@@

PQBS TUV wxYz _DEOffV

QQO_

SPACE SLOW

Q O

D_P_¥ VCR DVD MUSE

¢LF_RIC-RE_TZOOM SKIP SKIP

_000

--2

llllllllllllllllllllllllllllllllo

Select i_iii icon using _1/1_

buttons, then press ENTER

button.

Audio menu will appear.

<DVD-Video>

11111111111111111111111111111111o

Select a desired audio chan-

nel using •/•buttons, then

press ENTER button.

Audio channel will switch.

Note

eleaeleaeleaeleaeleaeleaeleael J

•Some discs will only allow

you to change the sound-

track from the disc's menu.

Press TOP MENU button or

MENU /LIST button to dis-

play the disc's menu.

• On DVD-RW discs recorded

inVR mode that may have

both a main and a sub audio

channel, you can switch to

main (L), sub audio (R), or a

mix of both (L/R).

• This unit CANNOT record

in both stereo and SAP

(Secondary Audio Program)

at the same time.

Playing discs

When playing Audio CDs or HP3

files you can switch between

stereo, just the left channel or

just the right channel.

During playback, press DIS-

PLAY button.

The display menu will appear.

Screen:

OIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIo

Select icon using _1 /I_

buttons, then press ENTER

button.

Audio menu will appear.

e3lllllllllllllllllllllllllllllllllo

Select a desired audio chan-

nel using •/•buttons, then

press ENTER button.

Audio channel will switch.

_ ..... 0................oQ

,@/: AB6 DEF

QQQ(_

GHI JKL MNO

O@c.@

PQRS TUV wxYz VIDEO_V

QOQ_

SPACE SLOW

0 Q

D_PLAY VCR DVD PAUSE

G@e

RE_Om SETUP TIMERPR_

_ENU_T TOPMENU RETURN

o°©uW

¢LEA_Ca_SETZOOM SKIP SKIP

_OQO

_H cMSKIP

Switching subtitles

Many DVD Video discs have subti-

tles in one or more languages -

the case usually tells you which

subtitle languages are available.

You can switch subtitle languages

anytime during playback.

11111111111111111111111111111111,

Select _icon using _1/I_

buttons, then press ENTER

button.

Subtitle menu will appear.

oleleleleleleleleleleleleleleleleleo

During playback, press DIS-

PLAY button.

The display menu will appear.

Screen:

o3111111111111111111111111111111111J

Select a desired subtitle lan-

guage using •/•buttons,

then press ENTER button.

Subtitle will be displayed in the

selected language.

When selecting "OFF," subtitle will

disappear.

G_O,Q

PORS TUV WXYZ VIDEOflV

QQO_

SPACE SLOW

0 q_

DBPLAY VCR DVD PAUSE

G@e

_tEC/Om SETUP TI_I_RPR_,.t

oo /

.........................

•Some discs will only allow

you to change the subtitle

from the disc's menu. Press

TOP MENU button or MENU

/LIST button to display the

disc's menu.

<_ Playing discs _>

Switchin_ camera an_les

Some DVD Video discs feature

scenes shot from two or more

angles-check the case for details:

it should be marked with an angle

icon if it contains multi-angle

scenes.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

During playback, press DIS-

PLAY button.

The display menu will appear.

Screen:

i7 _i _i_i_ _ _ _ ii_i_i:ii I

i i

.olololololololololololololololololl

Select _icon using _1 /I_

buttons, then press ENTER

button.

Angle will switch each you press

ENTER button.

Angle icon appears when a switch-

ing camera angle is available.

Reducing block noise

ollllllllllllllllllllllllllllllllllo

During playback, press DIS-

PLAY button.

The display menu will appear.

Screen:

Select icon using _1 /I_

buttons, then press ENTER

button.

NR menu will appear.

i::iiiZZZZZI:I _

eOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOll

Select a desired option using

•/•buttons, then press

ENTER button.

Your setting will be activated.

This function reduces noise in the

playback picture.When playing

back discs recorded in long time

mode such as SLP or SEP mode,

select "Type I" or "Type 2".

("Type 2" is more effective.)

When playing back discs with a

few noises such as DVD-Video

discs, select "OFF".

M_ ..... o..............oQ

,@/: ABC DEF

@G)@

PQRS TUV WXYZ VIDEO_V

QQO_

SPACE SLOW

Q O

D_pLA¥ VCR DVD PAUSE

G_D

REC/OTR SETUp TI_ERpROC

® 21

OOQ@

¢LE_/_RESETZOOM SKIP SKIP

_0_

_IW c=SKiP

AUDIO OFEN_LOSE

REC SPEED

,@/: ABC DEF

@@@

PQRS TUV WXYZ VIDEOITV

@QQ_

SPACE SLOW

@ Q

D_P_Y VCR DVD _usE

CL£A£1GIE_T ZOOM SKIP SKIP

--2

Editing

Guide to a title list

Title list allows you to check the titles recorded on

the disc easily.You can choose a title to play from this

screen and easily edit the titles as you prefer.

Editing discs in Video mode

You can edit discs inVideo mode for the following items.

Be surethat once you edit titles,they will not remain as

recorded originally.

i eleting titles (Refer to page 61)

Putting names on titles (Refer to pages62-63)

Setting or clearing chapter markers (Refer to page 64)

"Note

eoeooeeooeeoeeooeooeooeeooeooeeooeeoeeooeooeooeeooe

•Once a disc is finalized, then editing the disc or

recording to the disc will not be available.

(Except DVD-RW discs in VR mode.)

• A playlist is not available with the DVD-R discs

and DVD-RW discs in Video mode.

1. Titles recorded on the disc can be selected to

edit by pressing ENTER button with the cursor

on the title.

2. Protect icon, which appears when the title has

been protected.

3. The selected title thumbnails from the title list.

4. The menus in here for editing titles as you pre-

fer.The available menus depends on the disc

type and the format type.

5. The details of the title, which can be changed to

the title name you will edit.

6. Time status bar of the title.

7. The arrow icon, which means the title list

includes a next or a previous page. Press I_or

4button by following direction of the icon.

8. Playback status of the current disc.

Editing

Editing discs in VR mode

For discs inVR mode, you can edit from "Original" menu or "Playlist" menu, which is created from the

original.

Editing original titles

The following items can be used to edit the original

titles.

•Deleting titles (Refer to page 65)

• Deleting parts of titles (Refer to pages 66-67)

• Putting names on titles (Refer to pages 67-68)

• Setting or clearing chapter markers (Refer to

pages 69-70)

• Setting pictures for thumbnails (Refer to pages

70-71)

• Setting titles to protect (Refer to pages 72-73)

Editing playlists

You can create a playlist from original titles, so that

you can edit as you prefer without losing original

titles.

The following items you can edit with a playlist.

• Deleting titles (Refer to page 74)

• Deleting parts of titles (Refer to pages 75-76)

• Putting names on titles (Refer to pages 76-77)

• Setting or clearing chapter markers (Refer to

pages 78-79)

• Setting pictures for thumbnails (Refer to pages

79-80)

• Adding titles to a playlist (Refer to page 81)

• Deleting a playlist (Refer to page 82)

r ......................................................................................................]

• Original titles once edited will not remain as recorded originally.When you want to leave the original as |

• it is, edit the playlist as you prefer. (Refer to pages 74-82) J

Editing

Deletin_ titles

You can delete titles which you

do not need anymore.

Be sure to know that the titles

once deleted cannot be brought

back to the disc.

When the last title in the title list

in Video mode is deleted, the disc

space to record will be increased.

First: !_

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Press SETUP button. Select

"DISC" using 4/I_ buttons,

then press ENTER button.

DISC menu will appear.

e_l )oeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select a desired title using •/

•/4/I_ buttons, then press

ENTER button.

Edit menu will appear.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Select "Title Delete" using •

/•buttons, then press

ENTER button.

Option window will appear.

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Titlelist will appear.

Screen:

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select "Yes" using <1 /I_ but-

tons, then press ENTER but-

ton.

Title will be deleted.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Editing

Puttin_ names on titles

You can put title names on the

titles and change the names from

this menu.

The names you put on the titles

will be displayed on a titlelist.

First: I

elalalalalalalalalalalalalalalalalao

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

Select "Edit Title Name"

using •/•buttons, then

press ENTER button.

A window for entering a title

name will appear.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

To enter atitle name, follow

the steps of "Guide to edit

title name" on this page.

character set

DiSpLAy VCR DVD PAUSE

lmlmlmlmlmlmlmlmlmlmlmlmlmlmlmlmo

Select "Edit" using •/•but-

tons, then press ENTER button.

Titlelist will appear.

Screen:

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Select a desired title using •/

•/_1 /I_ buttons, then press

ENTER button.

Edit menu will appear.

area for entering title names

When you finish entering a title

name, press ENTER button.

[Guide to edit title name ]

[Step I]: Select a desired character set using A/T

t buttons, then press

ENTER button.

[Step2]: Press Number buttons following by the list

below.

_.0_ <space> <space> 0 <space>

!"#$%

&'()*

@[]^

L{I}

_2_ ABC abc 2

_3_ DEF def 3

_ GHI ghi 4

_ JKL jk] 5

<_ MNO mno 6

_ PQRS pqrs 7

_8_ TUV tuv 8

_9_ WXYZ wxyz 9

*Press _1_ button, character set will be changed

to the " _!? " mode automatically.

• To delete letters, press CLEAR/C-RESET button

repeatedly. Holding CLEAR/C-CRESET button

to delete all letters.

• To go on to the next entering area for letters,

press _ button.

• You can enter up to 30 letters.

<( Editing

eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeo

Select "Yes" using <1 /I_ but-

tons, then press ENTER but-

ton.

The name you entered will be

activated for the title.

momomomomomomomomomomomomomomomoo

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

_ ..... 0................©Q

,@/: ABO DEF

QQQ(_

GHI JKL MNO

OQQ

PQRS TUV WXYZ VIDEOTrV

QOQ_

SPACE SLOW

O Q

DL_PLAY VCR DVD PAUSE

G D

RECMORITOR _.I_

OQ_QI

_ENU£_ST.............. "

O0@@D

CLEARIC_SET ZOOM SKIP SKIP

_OQO

S_}R CM SKIP

-6

Editing

Settin_ or clearin_ chapter markers

You can put chapter markers in

each title. Once a chapter is

marked, you can use it for the

chapter search feature.

You can set chapter markers at a

specified time you selected for

titles with more than S minutes.

First __ ! _/_iiiii_,

oemememememememememememememememememo

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

,lelelelelelelelelelelelelelelelele,

Select "Chapter Mark" using

•/• buttons, then press

ENTER button.

Option window will appear.

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Titlelist will appear.

Screen:

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

Select a desired time using •

/•buttons, then press

ENTER button.

Option window will appear.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Select a desired title using •/

•/_1 /I_ buttons, then press

ENTER button.

Edit menu will appear.

ooooooooooooooooooooooooooooooooo

Select "Yes" using _1 /I_ but-

tons, then press ENTER but-

ton.

A chapter marker will be added.

lolololololololololololololololoo

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Note

oeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

• You cannot select a time for

putting markers beyond a

length of a title.

• A chapter marker may be

delayed according to the

recording content.

Editing

Deleting titles

When a title is deleted from an

original list inVR mode, the disc

space to record will be increased.

Be advised that the titles once

deleted cannot be brought back

to the disc.

First:

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Press SETUP button. Select

"DISC" using 4/I_ buttons,

then press ENTER button.

DISC menu will appear.

elelelelelelelelelelelelelelelele

Select a desired title using •/

•/4/I_ buttons, then press

ENTER button.

Original menu will appear.

lllllllllllllllllllllllllllllllle

Select "Title Delete" using •

/•buttons, then press

ENTER button.

Option window will appear.

llelelelelelelelelelelelelelelelee

Select "Edit" using •/•but-

tons, then press ENTER button.

Original/PlayList menu will appear.

Screen:

Original

lllllllllllllllllllllllllllllllle

Select "Yes" using 41 /I_ but-

tons, then press ENTER but-

ton.

Title will be deleted.

elelelelelelelelelelelelelelelelelee

Select "Original" using 4 /I_

buttons, then press ENTER

button.

Original list will appear.

lllllllllllllllllllllllllllllllle

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu. 65

Editing

Deleting parts of titles

You can delete part of a title, the

disc space to record will be

increased.

Be advised that the parts once

deleted cannot be brought back

to the disc.

First: I

eeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeao

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

Select a desired title using •/

•/_1 /I_ buttons, then press

ENTER button.

Original menu will appear.

ooooooooooooooooooooooooooooooooo

Select "Scene Delete" using

•/•buttons, then press

ENTER button.

Option window will appear.

oO000000000000000000000000000000000o

Select "Edit" using •/•but-

tons, then press ENTER button.

Original/PlayList menu will appear.

Screen:

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Select "Original" using _1 /I_

buttons, then press ENTER

button.

Original list will appear.

lolololololololololololololololo,

Press ENTER button to

decide a start point, then

press ENTER button to

decide an end point.

Acursor will move to "Preview."

You can check a preview.

<Preview> Start point End point

Before

editing

Edited

Editing )

Select "Delete" using •/•

buttons, then press ENTER

button.

Option window will appear.

Disc > Edit > Odginal

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Select "Yes" using _1 /I_ but-

tons, then press ENTER but-

ton.

Part of a title will be deleted.

ememememememememememememememememo

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Putting names on titles

You can put title names on the

titles and change the names from

this menu

The names you put on the titles

will be displayed on a titlelist

First:

oseseseseseseseseseseseseseseseseseo

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoo

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

Original

OPEN,CLOSE

REO SPEED AUDIO .

0 ¢_o...... @

Oil JKL MNO

@@@

PQRS TUV WXYZ VIDEO_V

SPACE SLOW

Q @

DISPLAy VCR DVD PAUSE

c@D

0 O _01@

%_" cMSKiP

.............,,..........• You cannot select Scene |

Delete when the number of |

chapter markers in the original I

ABC DEF

JKL MNO

_> G) C.i)

PQRS TUV WXYZ VIDEOIV

SPACE SLOW

DISPLAy VCR DVD _usE

=_=© @ @

Editing

Select "Original" using <1 /I_

buttons, then press ENTER

button.

Original list will appear.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Select a desired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Original menu will appear.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiit

Select "Edit Title Name"

using •/•buttons, then

press ENTER button.

A window for entering a title

name will appear.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

To enter a title name, follow

the steps of "Guide to edit

title name" on this page.

character set

area for entering title names

When you finish entering a title

name, press ENTER button.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii.

Select "Yes" using <1 /I_ but-

tons, then press ENTER but-

ton.

The name you entered will be

activated for the title.

IiIiIiIiIiIiIiIiIiIiIiIiIiIiIiIiO

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

rGuide to edit title name ]

[Step I]: Select a desired character set using A/W

buttons, then press

ENTER button.

[Step2]: Press Number buttons following by the list

below.

QO_ <space> <space> 0 <space>

!"#$%

&'()*

q_) , <=>,+"l:;

@[]^

_{I}

Q2_ ABC abc 2

_'3_ DEF def 3

Q4_ GHI ghi 4

Qs_ JKL jkl 5

_ MNO mno 6

_7_ PQRS pqrs 7

_8_ TUV tuv 8

_9_ WXYZ wxyz 9

Press _1_ button, character set will be changed

to the " @!,_ " mode automatically.

• To delete letters, press CLEAR/C-RESET button

repeatedly. Holding CLEAR/C-CRESET button

to delete all letters.

• To go on to the next entering area for letters,

press Q_ button.

• You can enter up to 30 letters.

Editing

Settin_ or clearin_ chapter markers

You can put chapter markers in

each title. Once a chapter is

marked, you can use it for the

chapter search feature.

You can put a chapter marker

anywhere you want.

When the number of chapter

markers in the original list comes

to 999 in total, you cannot add

any more chapter markers.

First: !_

Press SETUP button. Select

"DISC" using <1/I_ buttons,

then press ENTER button.

DISC menu will appear.

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

llllllllllllllllllllllllllllllllo

Select a desired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Original menu will appear.

OIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIo

Select "Chapter Hark" using

•/•buttons, then press

ENTER button.

Option window will appear.

Original

Select "Original" using <1 /I_

buttons, then press ENTER

button.

Original list will appear.

llllllllllllllllllllllllllllllllo

Select "Add" or "Delete"

using •/•buttons, then

press ENTER button.

Option window will appear.

<Add>:

Editing

<Delete>:

•You cannot delete the first

chapter marker of each title.

lllllllllllllllllllllllllllllllle

Select "Yes" using </• but-

tons, then press ENTER button.

A chapter marker will be added.

<Add>:

The chapter marker which you

selected will be deleted.

<Delete>:

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIle

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

FrEe SPEE DOFE_ LOSE

,@/: ABC DEP

PQRS TUV WXYZ VIDEO_V

SPACE SLOW

D_pLAy VCR OVO PAUSE

C!?_@O

OOCO@

CLtt/C-IESfT ZOOM SKIP SKIP

--7

Settin 8 pictures for thumbnails

You can set a picture to each title for

a thumbnail. It helpsyou to remem-

ber the contents of the title you are

playing.The beginning picture has

been selected as the default.

First:

Jemememememeaeaeaeaeaeaeaeaeaeaeaea J

Press SETUP button. Select

"DISC" using <1/I_ buttons,

then press ENTER button.

DISC menu will appear.

eeeeleleleleeeleleleleeeleleleleeell

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

M_ ..... o..............oQ

,@11 ABC DEP

PQRS TUV WXYZ VIDEO_fV

@)@@_

SPACE SLOW

D_S_¥ VCR DW PAUS_

CtI_t_ES_ ZO0_ S_IP SKIP

_0_

• .........................]

• If a selected picture for a /

thumbnail is deleted by delet- /

ing a part of a title, a default /

• picture will be selected. J

<_ Editing

Select "Original" using <1 /I_

buttons, then press ENTER

button.

Original list will appear.

OIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOo

Select a desired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Original menu will appear.

OIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIo

Select "Yes" using <1 /I_ but-

tons, then press ENTER but-

ton.

A picture for thumbnail will be

set.

111111111111111111111111111111111

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

£ECSpEED OPE_OLOSE

,@I: ABC DEF

Q O Q ,_X

PORS TUV WXYZ VIDEO_V

QOQ_

SPACE SLOW

0 Q

DBPLAY VCR DVD PAUSE

REClOT£ SETUP TIMERPR_

MENeLBTTOPMENU RETURN

CLEN/C_[SET zoom SKIP SKIP

_00Q

s_NR C# SKIP

-3

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIQ

Select "Index Picture Set"

using •/•buttons, then

press ENTER button.

Option window will appear.

Editing _>

Settin_ titles to protect

To prevent accidental editing or

erasing the titles, you can protect

them from the original menu.

First:

elllllllllllllllllllllllllllllllllle

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

llllllllllllllllllllllllllllllllo

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

llllllllllllllllllllllllllllllllo

Select adesired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Original menu will appear.

llllllllllllllllllllllllllllllllo

Select "Protect OFF -) ON"

using •/•buttons, then

press ENTER button.

Option window will appear.

llllllllllllllllllllllllllllllllo

Select "Yes" using <1 /• but-

tons, then press ENTER button.

AUDIO OFEN_LOSE

REC SPEED

<*>o@

.@/: ABC DEP

q)@@_

PQRS TUV WXYZ VIDEO/TV

CO @ CO _)

SPACE SLOW

c@ Q

D_pLAy VCR OVO PAUSE

¢L_ARIGRESETZOOM SKIP SKIP

c_DOQO

-I

tllllllllllllllllllllllllllllllllllo

Select "Original" using <1 /I_

buttons, then press ENTER

button.

Original list will appear.

llllllllllllllllllllllllllllllllo

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

To protect awhole disc

(DVD-RWVR mode Only):

Select "Disc Protect" from Disc

menu, then select "Yes".

<_ Editing

Releasin_ titles from protectin_

)

You are allowed to release the

titles protecting feature once pro-

tected.

First:

oeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeo

Press SETUP button. Select

"DISC" using _1 !_ buttons,

then press ENTER button.

DISC menu will appear.

lelelelelelelelelelelelelelelelel

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

OIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIo

Select a desired title using •/

•/_II /I_ buttons, then press

ENTER button.

Original menu will appear.

o5111111111111111111111111111111111o

Select "Protect ON -) OFF"

using •/•buttons, then

press ENTER button.

Option window will appear.

REC SPEED OPEN/CLOSE

,@/: ABC DEF

PQRS TUV WXYZ VIDEO_V

SPACE SLOW

O Q

DL_PLAY VCR DVD PAUSE

c@D

,£T_®®

5o 2

Original

elelelelelelelelelelelelelelelelo

Select "Yes" using _II /I_ but-

tons, then press ENTER but-

ton.

ollleleleleleleleleleleleleleleleleo

Select "Original" using _II /I_

buttons, then press ENTER

button.

Original list will appear.

11111111111111111111111111111111,

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Editing _>

Deletin_ titles

InVR mode, even when a title is

deleted from a Playlist,the original

title will remain in an Original list.

The disc space to record will not

be increased.

First: I

eemememememememememememememememememe

Press SETUP button. Select

"DISC" using <1/I_ buttons,

then press ENTER button.

DISC menu will appear.

lllllllllllllllllllllllllllllllle

Select "Edit" using •/•but-

tons, then press ENTER button.

Original/PlayList menu will appear.

Screen:

eelelelelelelelelelelelelelelelelele

Select a desired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Playlist menu will appear.

llllllllllllllllllllllllllllllllo

Select "Title Delete" using •

/•buttons, then press

ENTER button.

Option window will appear.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiio

Select "Yes" using <1 /• but-

tons, then press ENTER button.

Title will be deleted.

AUDIO OFEN_LOSE

REC SPEED

<*>o@

.@/: ABC DEP

q)@@_

PQRS TUV WXYZ VIDEO/TV

CO @ CO _)

SPACE SLOW

¢@ Q

D_pLAy VCR OVO PAUSE

¢L_ARIC-RESETZOOM SKIP SKIP

c_DOQO

-1

olllllllllllllllllllllllllllllllllle

Select "PlayList" using <1 /I_

buttons, then press ENTER

button.

Playlist will appear.

elllllllllllllllllllllllllllllllllle

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Editing

Deletin_ parts of titles

You can delete part of a title.

Even when a title is deleted from

the playlist, the original title will

remain.

The disc space to record will not

be increased.

First:

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Press SETUP button. Select

"DISC" using 4/I_ buttons,

then press ENTER button.

DISC menu will appear.

_ll ooeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Select "Edit" using •/• but-

tons, then press ENTER button.

Original/PlayList menu will appear.

Screen:

Original

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Select "PlayList" using 4 /I_

buttons, then press ENTER

button.

Playlist will appear.

_ylist

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select a desired title using •/

•/4/I_ buttons, then press

ENTER button.

Playlist menu will appear.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Select "Scene Delete" using

•/•buttons, then press

ENTER button.

Option window will appear.

REC _pE£D OPE_CLOSE

,@/: ABC DEF

Q _ Q ,gX

PQRS TUV WXYZ VIDEOffV

CO 0 GP _

SPACE SLOW

0 0

DISPLAY VCR DVO PAUSE

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Press ENTER button to

decide a start point, then

press ENTER button to

decide an end point.

Acursor will move to "Preview".

You can check apreview.

<Preview> Start point End point

Before

editing

Edited

Editing _>

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoo

Select "Delete" using •/•

buttons, then press ENTER

button.

Option window will appear.

Part of a title will be deleted.

oeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeo

After writing to disc is com-

.................................... pÁeted± press SETUP button

8 to exit DISC menu.

Select "Yes" using 4 /I_ but-

tons, then press ENTER but-

ton.

Putting names on titles

You can put title names on the

titles and change the names from

this menu.

The names you put on the titles

will be displayed on a titlelist.

First: Ii

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Press SETUP button. Select

"DISC" using 4/I_ buttons,

then press ENTER button.

DISC menu will appear.

Original/PlayList menu will appear.

Screen:

Original

leeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeo

Select "PlayList" using 4 /I_

buttons, then press ENTER

button.

Playlist will appear.

,_1; ABC DEP

MNO _

QOQ

PORS TUV WXYZ VIDE0rrV

OQQ_

SPACE SLOW

O Q

D_Sp_y VCR DVD _USE

_ TI_C

_0_O

%_" cMSKiP

.............:,"..........]

• You cannot select Scene |

Delete when the number of |

chapter markers in the original I

or playlist is more than 900. J

_ ..... 0......

........oG

,@/: ABC DEP

@Q@

PQRS TUV WXYZ VIDEO,TV

OQC>_

SPACE SLOW

Q Q

DL$pLAy VCR DVD PAUSE

¢LEARIO-RESETZOOM SKIP SKIP

_000

-1

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Select "Edit" using •/•but-

tons, then press ENTER button.

<( Editing )

tleleleleleleleleleleleleleleleleleo

Select a desired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Playlist menu will appear.

lolololololololololololololololoo

Select "Edit Title Name"

using •/•buttons, then

press ENTER button.

A window for entering a title

name will appear.

Select "Yes" using <1 /I_ but-

tons, then press ENTER but-

ton.

The name you entered will be

activated for the title.

111111111111111111111111111111111

After writing to disc is com-

pleted, press SETUP to exit

DISC menu.

[Guide to edit title name ]

[Step I]: Select a desired character set using A/V

t buttons,then press

ENTER button.

[Step2]: Press Number buttons following by the list

below.

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIQ

To enter a title name, follow

the steps of "Guide to edit

title name" on this page.

character set

area for entering title names

When you finish entering a title

name, press ENTER button.

_0_ <space> <space> 0 <space>

!"#$%

_ +,-./:;

<=>._

@[]^

:41}

_2_ ABC abc 2

_3_ DEF def 3

GHi ghi 4

JKL jkl 5

_ MNO mno 6

_7_ PQRS pqrs 7

_8_ TUV tuv 8

_9_ WXYZ wxyz 9

Press _1_ button, character set will be changed

to the" @!_ " mode automatically.

• To delete letters, press CLEAR/C-RESET button

repeatedly. Holding CLEAR!C-CRESET button

to delete all letters.

• To go on to the next entering area for letters,

press _button.

• You can enter up to 30 letters.

Editing

Settin_ or clearin_ chapter markers

You can put chapter markers in

each title. Once a chapter is

marked, you can use it for the

chapter search feature.

You can put a chapter marker

anywhere you want.

When the number of chapter

markers in the playlist comes to

999 in total, you cannot add any 4

more chapter markers. Select a desired title using •/

First: f

! • /_1 /I_ buttons, then press

.................................... ENTER button.

1 Playlist menu will appear.

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

IOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Select "Chapter Mark" using

•/•buttons, then press

.................................... ENTER button.

__ Option window will appear.

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

AUDIO OFE_LOSE

REC SPEED

<*>o@

,@/; ABC DEP

q?@@_

PQRS TUV WXYZ VIDEOTTV

SPACE SLOW

c@ Q

D_pLAy VCR DVD PAUSE

Ct_t/_RESETZOOM SKIP SKIP

_DOQO

-1

Select "PlayList" using _1 /I_

buttons, then press ENTER

button.

Playlist will appear.

Editing )

<Delete>:

•You cannot delete the first

chapter of each title.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Select "Yes" using </•but-

tons, then press ENTER button.

A chapter marker will be added.

<Add>:

The chapter marker which you

selected will be deleted.

<Delete>:

ememememememememememememememememt

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

REC_pEED 0PE_CL0SE

,@I: ABC DEF

PORS TUV WXYZ VIDEO_V

CO CO G) _

SPACE SLOW

@ Q

DBPLAY VCR DVD PAUSE

00@@

CLEARICa_IETZOOM SKIP SKIP

=llliR CMSKIP

--7

Settin_ pictures for thumbnails

You can set a picture to each title

for a thumbnail. It helps you to

remember the contents of the

title you are playing.The begin-

ning picture has been selected as

the default.

First: !

eaemeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaee

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeel

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/Pla),List menu will appear.

Screen:

AUDIO OpENICL0$E

R£¢ SPEED

,@/: ABC DEF

PORS TUV WXYZ VIDEO_V

......._®_ 1

•_.o.:e.........................l

thumbnail is deleted by delet-|

ing a part of a title, a default |

..e.beseec.. Ii!!!tl

<_ Editing _>

Select "PlayList" using <1 /I_

buttons, then press ENTER

button.

Playlistwill appear.

olOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOo

Select a desired title using •/

•/<1 /I_ buttons, then press

ENTER button.

Playlist menu will appear.

oOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOII

Select "Yes" using <1 /I_ but-

tons, then press ENTER but-

ton.

A picture for thumbnail will be

set.

11111111111111111111111111111111,

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

AUDIO OFEN_LOSE

REC SPEED

<*>o@

.@/: ABC DEP

q)@@_

PaRS TUV WXYZ VIDEO_V

CO @ CO _)

SPACE SLOW

c@ Q

D_pLAy VCR DVD PAUSE

¢L_ARIC-RESETZOOM SKIP SKIP

c_DOQO

--3

llllllllllllllllllllllllllllllllt

Select "Index Picture Set"

using •/•buttons, then

press ENTER button.

Option window will appear.

Editing

Addin_ titles to a Playlist

You can add or delete a title in

the playlist as you prefer.

You can add titles to a Playlist up

to 99.

First:

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Press SETUP button. Select

"DISC" using 4/I_ buttons,

then press ENTER button.

DISC menu will appear.

oeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select "Add New Title" using

•/•/4/I_ buttons, then

press ENTER button.

Original list will appear.

list > Add New Title

e51eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select a desired title using •/

•/4/I_ buttons, then press

ENTER button.

Original

Select "PlayList" using 4 /I_

buttons, then press ENTER

button.

Playlist will appear.

_ylist

o61eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

To delete a title from Playlist,

refer to "Deleting titles" on page

74.

To delete a Playlist, refer to

"Deleting a Playlist" on page 82.

Editing

Deletin 8a Playlist

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

A Playlist can be deleted if no 4

longer needed. Select "Delete Playlist" using

First: •/•/_1 /I_ buttons, then

press ENTER button.

"i .................................. Option window will appear.

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

Select "Yes" using _1 /I_ but-

tons, then press ENTER but-

ton.

"2"................................. A Playlistwill be erased.

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Original/PlayList menu will appear.

Screen:

AUDIO 0FE_L0$E

REC SPEED

<*>o@

,@/; ABC DEF

q)@@_

PaRS TUV WXYZ VIDEO/IV

CO @ CO _)

SPACE SLOW

c@ Q

D_P_Y VCR DVD PAUSE

Ct_t/_RESETZOOM SKIP SKIP

c_DOQO

--1

ooooooooooooooooooooooooooooooooo

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

Select "PlayList" using _1 /I_

buttons, then press ENTER

button.

Playlist will appear.

Note 1

I Deleting a Playlist will not

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOe

| increase the available record-

, ing time on disc.

Editing

Deletin_ titles

)

You can delete titles which you

do not need, however the disc

space to record on the disc will

not be changed.

Be sure to know that the titles

once deleted cannot be brought

back to the disc.

First: I

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Press SETUP button. Select

"DISC" using 4/I_ buttons,

then press ENTER button.

DISC menu will appear.

You cannot select "Chapter Marl<".

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

Select "Title Delete" using •

/•buttons, then press

ENTER button.

Option window will appear.

Disc > Edit

£ECSpEED 0PE_0L0$E

,@I: ABC DEF

Q _ Q ,gX

PQRS TUV WXYZ VDEO_V

_P C_> GP _

SPACE SLOW

O Q

DBPLAY VCR DVD PAUSE

5o 2

Select "Edit" using •/•but-

tons, then press ENTER but-

ton.

Titlelist will appear.

Screen:

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Select "Yes" using 4 /I_ but-

tons, then press ENTER but-

ton.

Title will be deleted.

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoee

Select a desired title using •/

•/4/I_ buttons, then press

ENTER button.

Edit menu will appear.

eoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

Editing

Puttin_ names on titles

You can put names on the titles

and change the names from this

menu.

The names you put on the titles

will be displayed on a titlelist.

First: I

elalalalalalalalalalalalalalalalalao

Press SETUP button. Select

"DISC" using _1/I_ buttons,

then press ENTER button.

DISC menu will appear.

elelelelelelelelelelelelelelelelo

Select "Edit" using •/•but-

tons, then press ENTER button.

Titlelist will appear.

Screen:

oooooooooooooooooooooooooooooooooooo

Select a desired title using •/

•/_1 /I_ buttons, then press

ENTER button.

Edit menu will appear.

You cannot select "Chapter Marl<".

oOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOI

Select "Edit Title Name"

using •/•buttons, then

press ENTER button.

Awindow for entering a title

name will appear.

IOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOo

To enter atitle name, follow

the steps of "Guide to edit

title name" on this page.

character set

area for entering title names

When you finish entering a title

name, press ENTER button.

ololololololololololololololololo

Select "Yes" using _1 /I_ but-

tons, then press ENTER but-

ton.

olololololololololololololololol,

After writing to disc is com-

pleted, press SETUP button

to exit DISC menu.

7--1

rGuide to edit title name ]

[Step I]: Select a desired character set using &/V

t buttons, then press

ENTER button.

[Step2]: Press Number buttons following by the list

below.

_.0_ <space> <space> 0 <space>

!"#$%

&'()*

<=>?

@[]^

_{I}

_2_ ABC abc 2

_3_ DEF def 3

_D GHI ghi 4

_5_ JKL jk] 5

<_ MNO mno 6

_7_ PQRS pqrs 7

_8_ TUV tuv 8

_9_ WXYZ wxyz 9

*Press _1_ button, character set will be changed

to the " @!._ " mode automatically.

• To delete letters, press CLEAR/C-RESET button

repeatedly. Holding CLEAR/C-CRESET button

to delete all letters.

• To go on to the next entering area for letters,

press _ button.

• You can enter up to 30 letters.

Changing the SETUP menu

The following table is the contents which you can set and the default settings.

Refer to the following table for useful operation.

SETUP menu

I.Language setting

Pages 86-87

2.Display setting

Pages 88-89

3.Audio setting

Pages 90-91

4.Parental setting

il_ Pages 92-93

Items (highlight is the default)

Disc Menu Language

Contents

Set the language for disc menu.

Audio Language Set the language for audio.

Subtitle Language Set the language for subtitle.

OSD Background

Transparency

OSD Background

Color

OSD Language

Screen Saver

_i_i_:_:_:_i!_i_ii_i_i!_ii_ii_iiiiii_iiiiiiiiiiiiiiiiiiiiiiiii!i!!_!_i!!i!!i!i!i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_JJ_!_!!!!!!!JJiiiiiiSetthebackgroundtransparencyofOSD

_'_'_ ................................................iiiii i_screen.

ii_ii_ii_ii_i#!'i!_i!_;!_21i_,_,i!_!_!_!_iiiiiiiiiiiiiiiiiiiiiiiii#_!#_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_iiiiiiiii_ii_i!_!#_i#_i#_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_#i!_!!_!i_!i_!i_!i_!_!_!_i_ii_ii

] ;: SettheOSDscreonco,or.

I (Green), 2 (Blue), 3 (Red)

End!is _........................ Set the language for OSD

(On Screen Display).

Set the time to work the screen saver on

the screen.

Digital Out

Dynamic Range

Control

Fast Forward with

Audio

Set whether the sound recorded in 96kHz

will be down sampled in 48kHz.

Set the type of sound signal which outputs

from the digital audio output jack.

Compressing the range of sound volume.

Outputting the sound during play in fast

forward.

Parental Loci<

(Change password)

:_[[ .............................

Set the parental level of your DVD discs.

Set and change the password.

f_.o.:._................................l

1"'_°°chang°th°s°tt'ng'nS_mup/ I_ii_I

I menu, the information of contents /

| stays on even when the power is |

sw, h d li!!!tll

<_ Changing the SETUP menu _>

I Press STOP button if you

eooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooee

Press SETUP button to display SETUPIDISC menu.

SETUPIDISC menu will appear.

are playing a disc.

eeeooeoeeeeooeoeeeeooeoeeeeooeoeeeeooeoeeeeooeoeeeeooeoeeeeooeoeee

Select "SETUP" using 41 /I_ buttons, then press

ENTER button.

SETUP menu will appear.

5--2

oooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeo

Select "Playback" using •/•/41 /I_ buttons, then press

ENTER button.

Option window will appear.

eooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooee

Select a desired item using •/•buttons, then press

ENTER button.

Note

eeeooeeooeeooeeooeeooeeooeeooee

•Only the languages supported

by the disc can be selected.

• Audio Language setting may

not be available to some

discs.

• You can change or switch off

the subtitles on a DVD disc

also from the disc menu if it

is available.

Changing the SETUP menu

Disc Menu Language (Default : English)

Set the language for Disc Menu.

• Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

Audio Language (Default : Original)

Set the Audio language.

•Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

Subtitle Language (Default : OFF)

Set the subtitle language.

•Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

I If"Other" is selected, press 4-digit code using number buttons. I

age • When you finish entering

the code, press ENTER

button. Refer to the lan-

guage code table on page

101.

Press SETUP button to exit SETUP menu.

<_ Changing the SETUP menu _>

I Press STOP button if you I

euoeloeoeuoeloeoeuoeloeoeuoeloeoeuoeloeoeuoeloeoeuoeloeoeuoeloeoee

Press SETUP button to display SETUPIDISC menu.

SETUPIDISC menu will appear.

are playing a disc.

lmotoatolmotoatolmotoatolmotoatolmotoatolmotoatolmotoatolmotoao

Select "SETUP" using _1 /I_ buttons, then press

ENTER button.

SETUP menu will appear.

--2

ooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeooooeooeoooo

Select "Display" using •/•/_1 /I_ buttons, then press

ENTER button.

Option window will appear.

eoooolooeoooolooeoooolooeoooolooeoooolooeoooolooeoooolooeoooolt

Select a desired item using •/•buttons, then press

ENTER button.

Changing the SETUP menu

OSD Background Transparency (Default : 35%)

Set the background transparency of OSD screen.

You can choose one among 0% through 100%.

• Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

OSD Background Color (Default : I Green)

Set the OSD screen color.

You can choose one among I(Green), 2(Blue), and 3(Red).

•Select asetting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

OSD Language (Default : English)

Set the language for OSD.

•Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

Screen Saver (Default : I 0 minutes)

Set the time to work the screen saver function on the screen.

•Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

<_ Changing the SETUP menu _>

Choose the appropriate Audio settings for your equipment as

it will only affect DVD discs during playback.

I Press you are playing a

STOP button if disc.

ellllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllo

Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

olOllellllOllellllOllellllOllellllOllellllOllellllOllellllOllelllo

Select "SETUP" using _1 /I_ buttons, then press

ENTER button.

SETUP menu will appear.

--2

tlellellolellellolellellolellellolellellolellellolellellolellelloo

Select "Playback" using •/•/_1 /I_ buttons, then press

ENTER button.

Option window will appear.

llllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllt

Select a desired item using •/•buttons, then press

ENTER button.

.........................1

•Dynamic Range Control func-/

tion is available only on the /

discs which are recorded in /

the Dolby Digital format. ;

Changing the SETUP menu

Digital Out

Set the digital audio output.

• Select a setting using •/•

buttons, then press ENTER

button.

Option window will appear.

Proceed to steps A or B.

Settings for Dolby Digital (Default'Stream) I

•Select a setting using •/•buttons, then press ENTER button.

Your setting will be activated.

PCM : Convert the Dolby Digital into PCM(2 channel).

When your amplifier/decorder is NOT compatible with Dolby Digital,

set to "PCM".

Stream : Outputs a Dolby Digital signals.

Stream ,,When your amplifier/decorder is compatible with Dolby Digital, set to

Stream .

_1 Settings for PCM (Default :Auto)

•Select a setting using •/•buttons, then •Note ....................

yoPress ENTER button.

ur setting will be activated. When playing disc with

Auto

48kHz

96kHz

Dynamic Range Control

(Default : ON)

: Select "Auto" usually.

: If your amplifier/decoder is NOT com-

patible with 96kHz PCM, select "48kHz".

96kHz sound will be output in 48kHz.

: If your amplifier/decoder is compatible

with 96kHz PCM, select"96kHz". 96kHz

sound will be output.

Set to ON to compress the range between soft and loud sounds.

•If you select "Auto", the

sound will be clown sam-

pled at 48kHz.

• If you select "96kHz", no

digital sound will be out-

put. Select "Auto", so

that outputting 48kHz

digital sound.

•Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

Fast Forward with Audio (Default :OFF)

Set to ON to output the sound during playback in fast forward of x2.

•Select a setting using •/•

buttons, then press ENTER

button.

Your setting will be activated.

Press SETUP button to exit SETUP menu.

<_ Changing the SETUP menu _>

Some DVD-Video discs feature a Parental Loci< level. Playback

will stop if the ratings exceed the levels you set, it will require

you to enter a password before the disc will playback.This fea-

ture prevents your children from viewing inappropriate materi-

als.

I Press STOP button if you are playing a disc.

Ilollellllollellllollellllollellllollellllollellllollellllollellll

Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

llllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllo

Select "SETUP" using _1 /I_ buttons, then press

ENTER button.

SETUP menu will appear.

RE€SPEED_ oAUDIOO_E

--2

ololleloelolleloelolleloelolleloelolleloelolleloelolleloelolleloeo

Select "Playback" using •/•/_1 /I_ buttons, then press

ENTER button.

Option window will appear.

lllllllllllllllllllllllllllllllllllllllllllllllllllllllellllllo

Select "Parental Lock" using •/•buttons, then press

ENTER button.

Note

not be available to some

discs.

•With some DVDs, it may be

difficult to find if they are

compatible with parental loci<.

Be sure to check if the

parental lock function oper-

ates in the way that you have

set.

• Record the password in case

yOU forget it.

Changing the SETUP menu

Parental Lock (Default :All)

Set the Parental Loci< level.

• Change the parental level

using •/• buttons, then

press ENTER button.

Option window will appear.

Proceed to steps A or B.

1_ A password has not been set yet

•Select "Yes" using _1 /I_

buttons, then enter a new

password using Number

buttons.

Your setting will be activated.

•If you select "No", proceed

to Step 5.

_1 _ A password has been set already

•Enter the current password

using Number buttons.

•If you select "No", proceed

to Step 5.

Yes

II Change the password

•Select "Yes" using _1 /I_

buttons, then enter a new

password using Number

buttons.

Your setting will be activated.

i i!

Press SETUP button to exit SETUP menu.

•Note

ton to erase numbers entered

incorrectly.

• When you forget the pass-

word or you want to clear all

settings in Parental lock, enter

4,7,3,7 using Number buttons

in option window. Password

will be cleared and parental

levels will be set to All.

VCR functions )>

ee,e,e,e,e,e,e,e,e,eJeJeJeJeJeJeJeJe

Press POWER button on the

remote control or the front

panel of the unit.

When you are playing a tape, turn

theTV on and be sure to select

the input to which the unit is con-

nected.

Press:

eeleleeeleleleleeeleleleleeelelelele

Insert a prerecorded tape,

then press PLAY I_ button to

begin playback.

eelelelelelelelelelelelelelelelelele

During playback, press

PAUSE I I button.

Playback will pause and sound will

be muted.

lellllellllellllellllellllelllleo

Press PLAY I_ button to

resume play.

_.eleleleeeleleleleeeleleleleeelelee

Press STOP •button to stop

playback.

.lllellllellllellllellllellllellle

Press STOP/EJECT • _ but-

ton on the front panel of the

unit to eject the tape.

1_1

.@/: ABC

MNO

@PORS _ @_WXYZVIDEO_V

SPACE SLOW

Q Q

DiSPLAy _ DVD PAUSE

Ci_ Go_DC_

)G D

tEC/OTa SETUP TIMEtP_G.

Note

leeeeeeeeeeeeeeeeeeeeeeeeeeeeee

•When a tape without record

tab is inserted, the unit will

start playback automatically.

• Tracking will be automatically

adjusted upon playback.To

adjust the tracking manually,

press the CHANNEL A/V

buttons on the front panel of

the unit or CHA/CHV but-

tons on the remote control.

Recording

Before recording, make sure:

• The desired channel is selected

by pressing Number buttons on

the remote control or CHAN-

NEL A/V buttons on the front

panel of the unit.

• There is a tape with a record tab

in the unit.

• The desired recording speed is

selected in SP (standard play) or

SLP (super long play) mode by

pressing REC SPEED button on

the remote control.

Recording speed:

• Stereo or SAP is selected.

First:

eleleeeleleleleeeleleleleeelelelelee

Press REC/OTR button to

begin the recording.

To temporarily stop recording or

to resume it, press PAUSE I I but-

ton.After the unit has been in

Pause mode for 5 minutes, it will

stop automatically to protect the

tape and the video head from

damage.

eeeeleleleleeeleleleleeeleleleleeelo

Press STOP button when the

_ wxYz VlDEorrv

SPACE SLOW

-1

Note

I•ee••ee••ee••ee••ee••ee••ee••e

• To view one channel while

recording another

I) While you are recording on

the unit, pressVIDEO/TV but-

ton.

2) At the cable box or satel-

lite box, select the channel

you want to view.

Ifyou have connected the unit to

a cable box or satellite box, refer

to "Connection to a Cable Box

or Satellite Box" section on page

14.

• If OTR is finished inVCR during

playbackor REC mode in DVD,the

VCR will be in STOP mode andthe

DVD keepsthe current mode.

VCR functions

One-touch timer recordin_

)

This feature allows you to set the

recording lengthsimply by pressing

REC/OTR button on the remote

control or the front panel of the unit.

First:

ollllllllllllllllllllllllllllllllllt

During normal recording,

press REC/OTR button to

begin one-touch timer

recording.

When one-touch timer recording

is finished, the unit will turn off

automatically.

To cancel the one-touch timer

recording within the specified

time, press STOP •button. m

AUDIO OPEWCL_E

RECSPEED

,@I: ABC DEF

@@@

@PORS G @_wxYzVIDE_

SPACE SLOW

Q Q

DBPLAY VCR DVD MUSE

Cip C@ C@ G_

REC_m SETUP TIMERPROG.

R£CMORITOR £NT£R

OQG_Q

IENILBT TOPIEtU RfTUtt

OOCD@

CLEARIC-R_B_TZOOM SKIP SKIP

You can select a fixed recording _ O (El) O

time by pressing the REC/OTR _ _p

button repeatedly.

Index search

REC_PEED

An index marl< will be assigned at

the beginning of each recordings

you mal<e.You may skip to a specif-

ic marked point by following the

steps below.

First:

tiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiit

Press SEARCH MODE button

so that the index search

menu appears.

tllllllllllllllllllllllllllllllllllt

•3111111111111111111111111111111111J 2

Enter the number of record-

ings you wish to skip using

Number buttons with in 30

seconds.

Press I_1_/_1_1 buttons to

start index search.

If you want to go in the forward

direction, press I_1_ button.

If you want to go in the reverse

direction, press _1_1 button.

After index search, theVCR will

play the tape automatically.

INDEX SEARCH

s• .........................1

• Every time a tape is recorded, I

an index marl< is written on |

• the tape. J

VCR functions

Time search

This feature allows you to go to a

specific point on a tape by entering

the exact amount of time you wish

to skip in order to reach the

point.

First:

lelelelelelelelelelelelelelelelelell

Press SEARCH MODE button

TIME SEARCH

repeatedly so that the Time direction, press I_1_ button.

search menu appears. If you want to go in the reverse

.................................... direction, press _qP41button.

2 After time search,the unit will play

the tape automatically.

Enter your desired time to

skip using Number buttons

with in 30 seconds.

elllllllllllllllllllllllllllllllllll

Press I_1_/_< buttons to

start time search.

If you want to go in the forward

R;_D AUDIOc_ @OPEN/CLO$

IEC/OT£ SETUP TI_ER_C_

RECMON_OR ENTER

C> <Z><_ @

MENL_LBTTOPMENU _ETURN

O0_@

CL_/C-_[SET ZOOM SKiP SKiP

'_ 0 @ <D

•Note

eaeeoaeeoaeeoaeeoaeeoaeeoaeeoae

•These functions are not avail-

able during recording.

• Press STOP button to stop the

search.

• If the endof the tape is reached

during a Search,this unit will cancel

the searchand rewind the tape.

i! iilFirst:i

To cue or review picture during playback (Picture Search):

PressI_1_/_1_1 buttons during playback.

Press it again and the unit will search in super high speed. (in the SLP

mode only)

To freeze the picture on TV screen during playback (Still mode):

Press PAUSE I I button. Each time you press the button, the picture will

be forwarded by one frame.

If the picture begins to vibrate vertically during the still mode, stabilize

the picture by pressing the CHANNEL A/V or CHA/CHV buttons.

If the picture is distorted or rolling vertically, adjust the vertical hold

control on your TV, if equipped.

Counter Reset:

Press CLEAR/C-RESET button.

To playback in slow motion:

Press SLOW II_ button during playback or the still mode.

If the noise bars appear on the TV screen, you can reduce it by pressing

CHANNEL A/T or CHA/CHT buttons.

When you playback a tape recorded in Hi-Fi stereo:

Press AUDIO button on the remote control to select Hi-Fi or MONO

for playback sound mode.

• If you have connected a stereo TV to this unit, select "Hi-Fi".

• If you have connected a monaural TV to this unit, select"MONO".

Note

oeoe•eoe•eoe•eoe•eoe•eoe•eoe•ee

• Still/Slow/Pause mode will be

automatically cancelled after 5

minutes to prevent damage to

the tape and the video head.

• To return to playback from

the Picture Search/Still/Slow

mode, press PLAY button.

\Your Selection Hi-Fi MONO

T_ L-channel R-channel

non Hi-Fi tapes Monaural Monaural MonaLira[

Hi-Fi tapes

recorded in L R L+R

Hi-Fi stereo

Hi-Fi tapes

recorded main Main audio Main audio Main audio

audio program program program program

HFFi tapes Second audio Second audio Second audio

recorded second

audio program program program program

Others

Before requesting service for this unit, check the table below for a possible cause of the problem you are

experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and

restore proper operation.

Power

Picture

Sound

The power does not turn on. •Check that the AC power cord is connected securely.

There is no picture. • Re-connect the connecting cord securely.

• The connecting cords are damaged.

• The Setup Display appears. Press RETURN _J button to turn

off the display.

• Check the connection to yourTV (page 13).

• Check the RF output channel when you view aTV program

using RF connection.

• Switch the input selector on your TV (such as to "LINEI ") so

that the signal from this unit appears on theTV screen.

Picture noise appears.

TV program reception does not fill the

screen.

TV program pictures are distorted.

• The disc is dirty or flawed.

• Head cleaning forVCR may be necessary.

Refer to "AUTO HEAD CLEANING".

• If the picture output signal from the unit passes through yourVCR

to get to yourTV, or if you are connected to a combination

TV/VIDEO player, the copy-protection signal applied to some DVD

programs could affect picture quality. If you still experience this

problem even when you connect the unit directly to yourTV, try

connecting the unit to your TV's S-VIDEO input.

• Adjust tracking control for better picture by pressing

CHANNEL (A/v) buttons on this unit or CH (A/v)

buttons while you are playing a video tape.

• Try to set the channels with "Auto Preset" in SETUP menu

(page 18).

• Select a channel of anyTV program using the CH _ /v buttons.

• PressVIDEO/TV button if necessary.

• AdjustTV antenna.

• Adjust the picture (see theTV's instruction manual).

• Place the unit and TV farther apart.

• Place theTV and any bunched antenna cables farther apart.

TV channels cannot be changed.

The playback picture orTV program from

the equipment connected through the

unit is distorted.

• Switch the input to TV.

• Connect the antenna cable correctly (page 13).

• If the playback picture output from a DVD player, VCR, or tuner

goes through the unit before reaching your TV, the copy-

protection signal applied to some programs could affect picture

quality. Disconnect the playback equipment in question and

connect it directly to your TV.

There is no sound. • The disc is dirty or flawed.

• Re-connect all connections securely.

• The connecting cord is damaged.

• Check the connections to the amplifier input.

• The input source setting on the amplifier is incorrect.

• The unit is in pause mode or in Slow-motion Play mode.

• The unit is in fast forward or fast reverse mode.

• If the audio signal does not come through the DIGITAL OUT

(COAXIAL) jack, check the Audio Setup settings (pages 90-91 ).

Sound is noisy. • The disc is dirty or flawed.

• When playing a DTS-CD, noise may come from the speakers.

This unit is not compatible with DTS-CD.

No DTS sound is output • This unit is not compatible with DTS sound.

Others

Playback

The disc does not play.

The disc does not start playback from the

beginning.

The unit starts playing from the disc

automatically.

Some functions such as Stop, Search, or

Slow-motion Play cannot be performed.

The language for the sound track cannot

be changed.

• No disc is inserted.

• A blank disc is inserted.

• No cassette tape is inserted.

• The disc is upside down. Insert the disc with the labeled side facing up.

• The disc is not correctly inserted.

• The unit cannot play certain discs (such as a CD-ROM) (page

43).

• The region code on the DVDVIDEO does not match the unit

(page 43).

• Moisture has condensed inside the unit. Remove the disc and

leave the unit turned on for about half an hour until the

moisture evaporates (page 4).

• If the disc was recorded on another recorder, the unit cannot

play the disc if it was not finalized (page 41).

• Resume play was activated (page 48). Press STOP • button

twice.

• You have inserted a disc whoseTitle menu or DVD menu

automatically appears on the-IV screen when it is first insert.

• The DVDVIDEO features an auto playback function.

• Depending on the disc,you may not be able to do some of the

operations above. See the instruction manual supplied with the disc.

• Multilingual tracks are not recorded on the DVDVIDEO,

DVD-R or DVD-RW being played.

• The DVDVIDEO prohibits the changing of the language for the

sound track.

• Try changing the language using the DVDVIDEO's menu.

The subtitle language cannot be changed

or turned off.

The angles cannot be changed.

• Multilingual subtitle are not recorded on the DVDVIDEO.

• The DVDVIDEO prohibits changing of the subtitles.

• Try changing the subtitle using the DVDVIDEO's menu.

• Multi-angles are not recorded on the DVDVIDEO being played.

• You are trying to change the angles when _ icon does not

appear on theTV screen (page 58).

• The DVDVIDEO prohibits changing angles.

• Try changing the angle using the DVDVIDEO's menu.

Recording/Timer recording/Editing

The channel cannot be changed from the

channel you are recording.

Recording does not start immediately

after you press REC/OTR button.

• Set theTV's input to "TV."

• An unused DVD-R or DVD-RW was inserted. It takes a while

for the unit to automatically format a DVD-RW.

• Make sure the tape has a safety tab when you record to a

cassette tape. If needed, cover the hole with cellophane tape.

Nothing was recorded even though you

set the timer setting correctly.

•There was a power failure during recording.

• The units internal clock stopped due to a power failure that

lasted for more than 30 seconds.

Reset the clock (pages 22-23).

• Disconnect the AC power cord from the AC outlet, and

connect it again.

• The program contains copy protection signals that restricts copying.

• The timer setting overlapped with another setting that was set

later or has priority.

Recording does not stop immediately • It will take a few seconds for the unit to input disc data before

after you press STOP • button, recording can stop.

Timer recording is not complete or did • The timer setting overlapped with another setting that was set

not start from the beginning, later or has priority (page 36).

• Disc space was not enough.

Timer recording is impossible. • Make sure l_J indicator appears on the front display of this unit. If not,

press POWER button.

Others

Remote control

The remote does not function.

Others

• Batteries are weak.

• There are obstacles between the remote and the unit.

•The remote is far from the unit.

•There are no batteries in the remote.

•Turn on the unit.

•The remote is not pointed at the remote sensor on the unit.

•Press the DVD orVCR button, whichever you need.Then, try again.

• Check if a cassette tape is in this unit.

The unit does not operate properly. • When static electricity, etc., causes the unit to operate

abnormally, unplug the unit and then plug it in again.

The disc tray does not open when you

press OPEN/CLOSE _ button.

• It may take a few seconds for the disc tray to open after you

have recorded or edited a disc.

• This is because the unit is adding disc data to the disc.

IDiscError I

-- Please eject the disc. -- Unplayable disc is inserted

in the unit.

Playback feature may not be

available on this Disc.

Insert the standardized disc which

bear the marks on page 43.

IRegion Error I

-- Please eject the disc. --

Playback is not authorized in your

region.

Playback is not authorized

in the region of the DVD-Video

disc which you inserted in the unit.

Insert the DVD-Video disc with

region codes I orALL.

IParental Loci< On I

-- Please eject the disc. --

The current selected parental level

Prohibits playback.

The current selected parental

level in the SETUP Menu

prohibits playback.

Check the "Parental Loci<" setting

(pages 92-93).

IRecording Error I

This program is not allowed

to be recorded.

The recording function encountered You cannot record copy prohibited

the copy prohibited program, programs.

IRecording Error I

This program is not

recordable inVideo mode.

You are trying to record the copy-

once program onto the DVD-RW

disc in Video mode.

Set "DVD-RW Recording Format"

to "VR mode" (page 28).

IRecording Error I

Can not record on this disc.

You are trying to record onto the

disc which is unrecordable, or the

disc status is unable to record.

Insert the recordable disc, and

ensure the disc status is satisfied

with recording (pages 26-42).

IRecording Error I

This program is not allowed to

be recorded on this disc.

You are trying to record the copy-

once program onto the DVD-RW

disc which is not compatible with

CPRM.

Insert the DVD-RW disc

(vet. I. I compatible with CPRM).

IRecording Error I

This disc is protected and not

recordable.

You are trying to record on to the

protected disc which is set in the

Disc Setting Menu.

Release the disc protect setting

in the Disc Setting menu (page 42).

Others

You can watch the TV programs with the tuner of the

unit. (Usually channel 3 or 4 of the TV is available for

the RF converter setting.) Be sure to connect the

unit to a TV using the RF cable. Refer to page 13.

oe=O®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®

Select channel 3 on yourTV.

+ Be sure that the unit is in DVD mode.

o®=®®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®O®O®®®

PressVIDEO/TV button on the remote con-

trol.

+ If noise appears, change the RF output channel of

the unit to CH 4 by pressingVIDEO/TV button for

3 seconds.The RF output channel will alternates

between CH3 and CH4 as follows.

for more than

3 seconds

RECSpEED AUDIO OPEN/CLOSE

,+,: _0@

ABe

mmo

PORS TUV WXYZ VBDEO_V

q_ 0 Q C-'_

SPACE SLOW

[3SpLAy VOR DVD PAUSE

_EC]OTR SETUP TIMERNO

RECmONrrOR ENTER

ME_L_T TOP+[_U _[TU_

(DO(i)@

--2

i3 seconds

(RFON) CH4

3 seconds

(RFON) CH3

V3 seconds

(RF ON) CH4

V3 seconds

+ Changing the RF output channel is available only

when the unit is in DVD mode.

100

Others

(Alan) Oromo 6159

Abkhazian 4748

Afar 4747

Afrikaans 4752

Albanian 6563

Amharic 4759

Arabic 4764

Armenian 5471

Assamese 4765

Aymara 477 I

Azerbaijani 4772

Bashkir 4847

Basque 5167

Bengali;Bangla 4860

Bhutani 5072

Bihari 4854

Bislama 4855

Breton 4864

Bulgarian 4853

Burmese 5971

Byelorussian 4851

Cambodian 5759

Catalan 4947

Chinese 7254

Corsican 4961

Croatian 5464

Czech 4965

Danish 5047

Dutch 6058

English 5160

Esperanto 5161

Estonian 5166

Faroese 5261

Fiji 5256

Finnish 5255

French 5264

Frisian 5271

Galician 5358

Georgian 5747

German 505 I

Greel< 5158

Greenlandic 5758

Guarani 5360

Gujarati 5367

Hausa 5447

Hebrew 5569

Hindi 5455 Russian 6467

Hungarian 5467 Samoan 6559

Icelandic 5565 Sangho 6553

Indonesian 5560 Sanskrit 6547

Interlingua 5547 Scots Gaelic 5350

Interlingue 5551 Serbian 6564

Inupiak 5557 Serbo-Croatian 6554

Irish 5347 Sesotho 6566

Italian 5566 Setswana 6660

Japanese 5647 Shona 6560

Javanese 5669 Sindhi 6550

Kannada 5760 Singhalese 6555

Kashmiri 5765 Siswat 6565

Kazakh 5757 Slovak 6557

Kinyarwanda 6469 Slovenian 6558

Kirghiz 5771 Somali 6561

Kirundi 6460 Spanish 5165

Korean 5761 Sundanese 6567

Kurdish 5767 Swahili 6569

Laothian 5861 Swedish 6568

Latin 5847 Tagalog 6658

Latvian; Lettish 5868 Tajik 6653

Lingala 5860 Tamil 6647

Lithuanian 5866 Tatar 6666

Macedonian 5957 Telugu 665 I

Malagasy 5953 Thai 6654

Malay 5965 Tibetan 486 I

Malayalam 5958 Tigrinya 6655

Maltese 5966 Tonga 666 I

Maori 5955 Tsonga 6665

Marathi 5964 Turldsh 6664

Moldavian 5961 Turkmen 6657

Mongolian 5960 Twi 6669

Nauru 6047 Ukrainian 6757

Nepali 6051 Urdu 6764

Norwegian 6061 Uzbel< 6772

Occitan 6149 Vietnamese 6855

Oriya 6164 Volapuk 6861

Panjabi 6247 Welsh 497 I

Pashto; Pushto 6265 Wolof 6961

Persian 5247 Xhosa 7054

Polish 6258 Yiddish 5655

Portuguese 6266 Yoruba 7161

Quechua 6367 Zulu 7267

Rhaeto-Romance 6459

Romanian 6461

Others

Analog audio

An electrical signal that directly

represents sound. Compare this

to digital audio which can be an

electrical signal,but is an indirect

representation of sound. See also

Digital audio.

Aspect ratio

The width of a TV screen relative

to its height. Conventional TVs are

4:3 (in other words, the screen is

almost square); wiclescreen models

are 16:9 (the screen is almost

twice as wide as it is high).

Chapter

Just as a book is split up into sev-

eral chapters, a title on a DVD

disc is usually divided into chap-

ters. See also Title.

Component video output

Each signalof luminance(Y) and

component(PB/CB, PR/CR) is inde-

pendent to output so that you can

experience picture color as it is.

CPRM

(Content Protection for

Recordable Media)

CPRM is acopy protection sys-

tem with scramble system regard-

ingthe recording of "copy-once"

broadcast programs (e.g. some

satellite broadcasts).

Digital audio

An indirect representation of

sound by numbers. During record-

ing,the sound is measured at dis-

crete intervals (44, 100 times a

second for CD audio) by an ana-

log-to-digital converter, generating

a stream of numbers. On playback,

a digital-to-analog converter gen-

erates an analog signal based on

these numbers. See also Sampling

frequency and Analog audio.

Dolby Digital

The system to compress digital

sound developed by Dolby

Laboratories. It offers you sound

of stereo(2ch) or multi-channel

audio (up to 5.1ch).

MP3 (MPEG Audio Layer 3)

MP3 is a method of compressing

files.You can copy MP3 files on

CD-R/RW discs from the comput-

er and play the files on this unit.

Finalize

To make DVD discs, which have

done recording, possible to play in

DVD players.With this unit, it is

possible to finalize DVD-R/DVD-

RW discs.

PCM

(Pulse Code Modulation)

The most common system of

encoding digital audio, found on

CDs and DAT. Excellent quality,

but requires a lot of data com-

pared to formats such as Dolby

Digital and MPEG audio. For com-

patibility with digital audio

recorders (CD, MD and DAT) and

AV amplifiers with digital inputs,

this unit can convert Dolby Digital

and MPEG audio to PCM. See also

Digital audio.

Playlist

From this list you can play con-

tents of a disc as your desired

order or in sequence.Also it is

allowed to search a specific scene

directly.

Regions code

Regions associate discs and play-

ers with particular areas of the

world.This unit will only play discs

that have compatible region

codes.You can find the region

code of your unit by looking on

the rear panel. Some discs are

compatible with more than one

region (or all regions).

Sampling frequency

The rate which sound is measured

byaspecified interval to turn into

digital audio data.The numbers of

sampling in one second defines as

sampling frequency.The higher the

rate, the better the sound quality

as possible as it is.

SAP

(Secondary Audio Program)

Sub-audio channel which is deliv-

ered separately from main-audio

channel.This audio channel is used

as an alternate in bilingual broad-

casting.

S-Video output

It delivers independently each sig-

nal of color(C) and luminance(Y)

to TV as video signals, so that

higher-quality picture will be

gained.

Title (DVD only)

Acollection of chapters on DVD

disc. See also chapter.

Trac k

Audio CDs use tracks to divide

up the content of a disc.The DVD

equivalent is called a chapter. See

also Chapter.

102

Others

[_1

System

VCR video heads

Power requirements

Power consumption

Weight

Dimensions (width x height x depth)

Operating temperature

Operating humidity

TV format

DVD-Video, DVD-R/RW, Audio CD,Video Cassette Tape

Four heads

AC 120V, 60 Hz

37 W (standby: 4.3 W)

9.5 Ibs ( 4.3 kg )

17 I/8" x 3 15/16" x 10 I/4" (435 x 100x 261 mm)

41F° to 104F° (5°C to 40°C)

5% to 85% (no condensation)

NTSC

/[!1TI_/1

Receivable channels

VHF 2-13ch

UHF 14-69ch

CATV C I-C 125ch

RF Converter Built-inVHF converter

Converter output VHF channel 3 or 4

Note:

The specifications and design of this product are subject to change without notice.

Espafiol

Estas instrucciones le ayudar_n a entender f_cilmente c6mo grabar discos DVD•

Nota:

Aseg_rese que las pilas est_n en el mando a distancia y que ha conectado correctamente esta unidad y el TV.

.....

Hay varias tipos de discos DVD grabables a su

elecci6n• Elija el tipo seg_n "Tipos de disco DVD"

en esta p_gina•

Este grabador de DVD puede grabar en los sigu-

ientes tipos de disco•

R RW

R4.7

Por ejemplo, cuando desea grabar repetidamente

en el mismo disco o cuando desea editar el disco

despu6s de grabar, seleccione el disco de tipo

regrabable DVD- RW.

Cuando desea guardar grabaciones sin alterarlos,

un DVD no regrabable DVD-R puede ser m_s

conveniente•

Paso2:Cologu.e.u.n..d!.s.co..enb n.co..

Para

encender

d.°.. P..v..°...........................................

• _'_ : M_s adecuado _r :Puede utilizar "_ :Algunas funciones son limitadas -- : No puede utilizar

Grabar programas de TV _ _ _-_

Volver a uUlizar borrando partes no deseadas _'_ _

Editar las grabaciones _ _:_

Editar/grabar de equipos conectados "_'_ _:_: "_"_

Copiar discos para distribuci6n _:_1 "_'_r'_ "_'_'_

Reproducir en otto equipo de DVD _._l _ _

Grabaci6n

_Regrabable? Si Si No

Puede crear capitulos a intervalos fijos (auto.) Si Si Si

Puede crear capitulos donde desee (manual) Si No No

Puede grabar im_genes de tamafio 16:9 Si Si Si

Puede grabar un programa de Copia-una-vez Si No No

Edici6n

Puede hacer funciones de edici6n b_isica Si Si No

Puedehacer fundones de edid6n avanzadas(edici6n de lista a reproducir) S[ No No

I El DVD-RW (modoVR) s61o puede reproducirse Nota:

en equipos de DV compatibles conVR. Para m_s de_alles sobre las funciones anteriores y las

limimciones implici_as, lea las explicaciones en este manual.

Formato del disco

_eeee_eeeeeeeeee_eeeeeeeeeeee,

Coloque el disco en el

grabador. HaDel formato del

disco clel menO SETUP,exis-

ten los formatos de video

(modo cleVideo) o de

grabaci6n de video (modo

VR) seg_in el tipo de disco

colocado. Esto es necesario

para preparar el disco para

grabaci6n.Vea los detalles en

las p_iginas28-30.

104

Espafiol )

Paso 3:Seleccione la

velocidad de

.......... n......

Para seleccionar el

modo DVD

Para selecdonar la

veloddad de grabaddn

Paso 4: Seleccione

el canal

deseado

leeoeeeeem Jleeeoeeeeem Jleeeoe i

Puede seleccionar el dtulo que desea reproducir de un ment_ indicado y empiece

a reproducir inmediatamente. Las grabaciones pueden verse f_cilmente en un

disco, el procedimiento es simple ya que

s61o tiene que elegir el dtulo en un capi-

tulo de la pantalla del men0.

_.Qu& son titulos ycapitulos?

La grabaciones del disco DVD se divi-

den generalmente en titulos. Los titulos

pueden subdividirse en capitulos.

Inicio de grab. Paradalinicio Parada grab.

iTitulol i iTitulo 2 i

, Pi _i

[Capitulo I]Capitulo 2]Capitulo 3! [ Capitulo I! Capitu_ 21

.S..u..se.r.e.n..c.i.a...2.-..E.d!.t.e..e/...d.i.s..c.o.g.r.a..b..a..d.9......................

La edici6n de discos puede ser muy f_cil y el grabador de DVD ofrece conve-

nientes funciones de edici6n posibles s61o con los DVD-R/RW.

Puede editar Io siguiente de la lista de titulos.

• Poniendo nombres en titulos

•Seleccionando imggenes para indices (rnodoVR)

•Seleccionando/borrando marcadores de capitulos

•Borrando partes de titulos (modo VR)

Original y Playlist (modoVR)

Puede editar lasgrabaciones en la lista a reproducir sin cambiar lasgrabaciones

originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco.

_Qu_ significa "Original" o"Playlist"?

o largo de este manual encontrar_ Original yPlaylist que se refieren a las

grabaciones reales y la versi6n editada.

•La grabaci6n Original se refiere a la grabaci6n real en el disco.

• El Playlist se refiere a la versi6n editada del disco; c6mo se va a reproducir

la versi6n Original.

Paso 6: Pare la

............. n.

105

il'i_i!i_iiii!il!ii

!i_ili);iiiii,l

iii/;'ziii!

Espafiol

o,m,m,m,m,m,m,m,m,m,aeaeaeaeaeaeaeao

Presione el bot6n POWER en

el mando a distancia o el

panel frontal de la unidad.

Cuando reproduzca una cinta,

conecte el TV y asegQrese de

seleccionar la entrada donde se

conecta la unidad.

Presione: !

eaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeao

Coloque una cinta pregraba-

day presione el bot6n PLAY

I_ para empezar la reproduc-

ci6n.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Durante la reproducci6n, pre-

sione el bot6n PAUSE II.

Se har_ una pausa de reproduc-

ci6n y se silenciar_ el sonido.

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeo

Presione el bot6n PLAY I_

para continuar la reproduc-

ci6n.

*Selelelelelelelelelelelelelelelelee

Presione el bot6n STOP •

para detener la reproducci6n.

eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeol

Presione el bot6n

STOP/EJECT • A en el panel

frontal de la unidad para

expulsar la cinta.

1_1

*@/: ABC

MNO

@@@

@PQRS _ @_WXYZVIDE0ffV

SPACE SLOW

Q Q

_i_DISPLAY C_ ___ _'_DVD PAUSE

REC/0Ta SETUp TlUERP_&

RECMONITOR ENTER

OQDq_@

Nota

sin la lengiJeta de grabaci6n, la

unidad empezar_ a reproducir

autom_ticamente.

• El seguimiento se ajustar_

autom_ticamente para la

reproducci6n. Para ajustar

manualmente el seguimiento,

presione los botones CHAN-

NEL A/T en el panel frontal

de la unidad o los botones

CHA/CHV en el mando a

distancia.

106

Espafiol

Grabaci6n

Antes de grabar, asegLirese de que:

•Se seleccion6 el canal cleseado

presionando los botones hum@i-

cos en el manclo a distancia o

botones CHANNEL A/T en el

panel frontal de la unidad.

• Hay una cinta con la lengiJeta

para grabaci6n intacta en la

unidad.

• Se seleccion6 la velociclad de

grabaci6n cleseada en SP (repro-

ducci6n est_ndar) o SLP (repro-

ducci6n de super larga duraci6n)

presionando el bot6n REC

SPEED en el mando a distancia.

Velocidad de grabaci6n:

• Se selecciona Est6reo o SAR

Primer•:

eooooooooooooooooooooooooooooooooooe

Presione el bot6n REC/OTR

para empezar la grabaci6n.

Para detener temporalmente la

grabaci6n o continuarla, presione

el bot6n PAUSE I I. Despu_s de

que la unidad haya estaclo en el

moclo de pausa durante 5 minu-

tos, se detendr_ autom_ticamente

para proteger al cinta y el cabezal

de video contra cambios.

lllllllllllllllllllllllllllllllle

Presione el bot6n STOP

cuando se complete la

grabaci6n.

Grabaci6n con temporizador de un toque

Esta funcibn permite seleccionar

la Iongitud de la grabacibn simple-

mente presionando el bot6n

REC/OTR en el mando a distancia

o en el panel frontal de la unidad.

Primer•:

eo•o•o•o•o•o•o•o•o•o•o•o•o•o•o•o•oo.

Durante la grabaci6n normal,

presione el bot6n REC/OTR

para empezar la grabaci6n

con temporizador de un

toque.

Puede seleccionar un tiempo de

grabacibn determinado presionan-

do repetidamente el botbn

REC/OTR.

Cuanclo termina la grabaci6n con

temporizaclor de un toque, la

unidad se desconectar_ autom_ti-

camente.

Para cancelarla grabaci6n con

temporizaclor de un toque clentro

del tiempo especificado,presione

el bot6n STOPi.

PORS _ __WXYZWDEO_

SPACE SLOW

D_PLAY VCR DVD MUSE

REC_ SETUP TIMERPROG.

_ECMONITOR ENTER

•Nota

:Far'; ""

graba en otro

I) Mientras est_ grabando en

la unidacl, presione el botbn

VIDEO/OTR.

2) En la caja de cable ocaja

de sat_lite, seleccione el canal

que desea ver.

Si se conect6 la uniclad a una

caja de cable o caja de sat61ite

consulte la secci6n de

"Conexi6n a una caja de cable

o caja de sat61ite" en la p_gina

14.

• Si se termina el OTR en la

videograbaclora durante el

modo de reproclucci6n o REC

en DVD, la videograbaclora

estar_ en el moclo STOP y la

DVD se mantiene en el modo

actual.

PQRS _ _ _WXYZ VIDEO_

SPACE SLOW

D_PLAY VCR DVD MUSE

® (@ @ (_@

_Ee_m SETUP TIM_RPRO_.

_C_O_TOR _NT_

_ENU_BTTOP_E_U R_TUR_

00@@

c_E_c._ ZOOM SKiP S_P

_ cMs_lP

107

LiMiTED WARRANTY

FUNAI CORP. will repair this Emerson product, free of charge in the USA in the event of defect in mate-

rials or workmanship as follows:

DURATION:

PARTS:

LABOR:

FUNAI CORR will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are

excluded from this warranty.

FUNAI CORR will provide the labor without charge for a period of ninety (90) days from

the date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE

RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER

WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This Emerson Limited warranty

does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal

use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alter-

ations or product not supplied by FUNAI CORR, or damage which results from accident, misuse, abuse,

mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as

hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts

of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT

REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR

MODELS.

FUNAI CORR AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY

THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART

OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRE-

SENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED

SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHO-

RIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORR

ATTENTION:

FUNAI CORR RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT

PRIOR NOTICE.

To locate your nearest Emerson Authorized Service Center or for general service procedure,

please call 1-800-605-8457 or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-605-8457

http:l/www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in China 0VMN04201 /E9400UD _--k-k-k

Emerson EWR20V4 User Manual DVD/VCR Manuals And Guides L0903086

EMERSON DVD/VCR Combo Manual L0903086 EMERSON DVD/VCR Combo Owner's Manual, EMERSON DVD/VCR Combo installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation