Emerson 100 Kw Lpc100 Load Bank Brochures And Data Sheets
2015-03-30
: Emerson Emerson-100-Kw-Lpc100-Load-Bank-Brochures-And-Data-Sheets-680330 emerson-100-kw-lpc100-load-bank-brochures-and-data-sheets-680330 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Avtron LPC100 Ultra-Compact, Portable Load Bank - 100 KW Testing Your Emergency Standby Generator with a Load Bank Means Reliability When it Matters Most. Key Features • Large Load Capacity - up to 100 KW at 240/480 V and 80 KW at 208 V • Rated for Continuous Operation • Ultra-Compact, Portable, Easy to Transport and Operate • Lightweight Aluminized Steel Enclosure - only 78 lbs. [35.5 kg] • Load Cables and Hard Shell Travel Case are included The Avtron LPC100 Load Bank is a portable, self-contained AC resistive load bank designed for indoor use. The Avtron LPC100 load bank is the standard in ultra-compact, portable load banks! The load bank provides up to 100 KW resistive load at 480 VAC or 240 VAC, 3 phase, 60 Hz. This versatile load bank weighs only 78 lbs. [35.5 kg], is lightweight and ultra-compact. The load bank is also rated for continuous operation, unlike most competitive units. The LPC100 load bank features horizontal air discharge to provide a low profile design. Fullyrated, quick-connect load terminals and simple operation allow the load bank to be set up and operated by a single technician, saving valuable time in the field. The load bank controls and cooling fans are powered by any standard 120 VAC, single phase wall outlet with detachable line cord provided. An integral control panel is provided for load bank operation and includes the necessary controls and status indicators. The load bank also includes the Avtron Advanced Digital Monitoring System (ADMS)™ as a standard feature. The ADMS meter provides faceplate digital display of Volts, Amps, Frequency, and KW. Data Logging Software (included at no additional cost) allows Real Time Data Acquisition and trending of all meter parameters from your Laptop PC or PDA. An Infrared/USB interface cable is included for “Plug and Play” convenience. • Convenient Operator Controls with Digital Metering and Data Logging Software included Superior Avtron quality combined with simple operation and maintenance will provide years of trouble free service. Avtron’s extensive line of Load Bank and Industrial Resistor Products are solid performers used throughout the world. For total technical support or additional information, please contact Avtron at (216) 573-7600 or LBsales@Emerson.com. Quality System Certified to ISO 9001 LPC100 100 KW UltraCompact, Portable Avtron Load Bank with transport case. Avtron LPC100 Ultra-Compact, Portable Load Bank - 100 KW Specifications subject to change without notice. Control Power The load bank requires control power of 120 VAC, single phase, 60 Hz (line cord provided). Controls Load Capacity Ratings: (3 phase, 60 Hz) Available Load Step Resolution: 12.5 KW Rated KW Rated Voltage 100 480 or 240 The operator control panel includes a MASTER LOAD ON-OFF switch, individual load step ONOFF industrial toggle switches, a CONTROL POWER ON-OFF switch, and a LOAD VOLTAGE selector switch. Load Bank Weight (approx.) Load Bank: 78 lbs. [35.5 kg] Case: 37 lbs. [17 kg] Cables: 25 lbs. [11 kg] Load Bank, Case, & Cables: 140 lbs. [63.5 kg] Cooling The resistive elements are air-cooled by eight high velocity muffin fans. 10.25 [260.00] RETRACTABLE HANDLE EXTENSION 15.50 [393.00] Load Cables The load bank includes a 10' [3048] cable set with fully-rated, quick-connect load terminals. Travel Case 31.75 [806.00] The load bank comes standard with a hardshelf protective travel case on casters with a telescoping handle. TWIST DRAW LATCHES Digital Metering Avtron Advanced Digital Monitoring System (ADMS)™ is provided for display of Volts, Amps, Frequency, and KW. ADMS™ also includes Data Logging Software at no additional cost. WHEELS 26.25 [666.00] 1.50 [38.00] 10.98 [278.00] Safety Features 21.33 [541.00] 1.38 [35.00] The LPC100 load bank features multiplearray overtemperature protection and wrong voltage detection circuitry. Load Bus is short circuit protected by main line fuses (one for each phase). REFER TO OWNERS MANUAL FOR SINGLE PHASE LOAD CONNECTION AND METERING INSTRUCTIONS THIS END UP DO NOT TILT KW LOAD STEPS CAUTION WARNING 23.75 [603.00] AVTRON B15896 WARNING: LOAD CABLES MUST BE INSTALLED AND LOCKED IN PLACE PRIOR TO CONNECTION TO GENERATOR OR POWER SOURCE A B GND AIR EXHAUST SIDE LOAD CONNECTION CONNECTORS C WARNING: WHEN OPERATING SINGLE PHASE, PROTECTIVE PLUG MUST BE INSTALLED IN PHASE C AIRFLOW CONTROL POWER CONNECTOR AIR INTAKE SIDE All dimensions are in inches [millimeters]. Emerson Network Power Avtron • 6255 Halle Drive, Cleveland, Ohio 44125, U.S.A. 216-573-7600 • FAX: 216-573-5953 • LBsales@Emerson.com EmersonNetworkPower.com/loadbank Emerson. Consider it Solved and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. All the other marks are the property of their respective owners. Communicator EXT™ is a trademark of Electro Industries/GaugeTech. ADMS™ is a trademark of Avtron. Specifications subject to change without notice. ©2015 Emerson Network Power Bulletin 440• Rev. D
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Create Date : 2015:03:11 15:42:21-04:00 Metadata Date : 2015:03:11 15:42:35-04:00 Modify Date : 2015:03:11 15:42:35-04:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:959c4f47-0bf9-40a7-be8a-baa9c63600d7 Original Document ID : xmp.did:F97F117407206811A7BA92A099A48037 Document ID : xmp.id:124620BC26C8E4118965945E1FA32B33 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:59B3AC9B26C8E4118965945E1FA32B33 Derived From Document ID : xmp.did:DC5996E21A94E3118760AF48E2A3E196 Derived From Original Document ID: xmp.did:F97F117407206811A7BA92A099A48037 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2015:03:11 15:42:21-04:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools