Emerson 67D Series Pressure Reducing Regulators Data Sheet
2015-03-30
: Emerson Emerson-67D-Series-Pressure-Reducing-Regulators-Data-Sheet-681010 emerson-67d-series-pressure-reducing-regulators-data-sheet-681010 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 12
Bulletin 71.1:67D
D103152X012
April 2012
www. sherregulators.com
TYPE 67DF OR 67DFR FILTERED REGULATORTYPE 67D OR 67DR REGULATOR
67D Series Pressure Reducing Regulators
• Optional Smart Bleed™
Construction
• Optional Stainless
Steel Construction
• Compact and Light Weight
• No Air Loss
P1183 P1182
Figure 1. 67D Series Pressure Reducing Regulators
• Easy Maintenance
• Optional Integral Filter
• Optional Internal Relief Valve
• Rugged Construction
Bulletin 71.1:67D
2
Features
•
Compact—The 67D Series regulators are
engineered for outstanding performance in a
compact, lightweight package.
• Pilot Supply Regulator—Improves the accuracy
of two-path control regulators by reducing inlet
sensitivity caused by uctuating inlet pressures.
• Pressure Loading Regulator—Provides accuracy and
improved performance in dirty steam service by
eliminating the need for a pilot regulator.
• Sour Gas Service Capability—NACE International MR0175
and MR0103 compliant construction available.
• Optional Stainless Steel Construction—The
Types 67DS, 67DSR, 67DFS, and 67DFSR
provide high resistance to corrosion, which is especially
benecial for offshore applications.
• Full Usable Capacity—Fisher® regulators are
laboratory tested. 100% of the published capacities
can be used with condence.
• Internal Relief—The Types 67DR, 67DSR, 67DFR,
and 67DFSR have an internal relief valve with a soft seat
for reliable shutoff with no discernible leakage. These
regulators are recommended for conserving plant air.
• Smart Bleed™—Opens to exhaust downstream
pressure when inlet pressure drops below outlet
pressure. Recommended for dead-end service.
• Integral Filter—The Types 67DF, 67DFR, 67DFS,
and 67DFSR have an integral lter ensuring clean
downstream air supply.
• Ease of Maintenance—No special tools are
required to perform maintenance, and all maintenance
can be performed with the regulator in the line. Filter
elements are easily replaced.
• Rugged Construction—The 67D Series regulators
are engineered for longer service life with minimal
maintenance requirements.
• Dual Second Outlets—Body side outlets for
pressure gauge or other uses.
• Corrosion Resistant Fasteners—Bolting and
adjusting screw are double zinc-chromated for
enhanced corrosion resistance. Optional stainless
steel bolting and adjusting screw are also available.
Introduction
The 67D Series regulators are typically used to deliver constant reduced pressure of gaseous uids to pilot-operated
controllers and other pneumatic instrumentation. As shown in the Available Congurations table, an assortment of regulators
is available to meet diverse ow requirements.
Bulletin 71.1:67D
3
1. The pressure/temperature limits in this Bulletin and any applicable standard or code limitation should not be exceeded.
2. Silicone (VMQ) is not compatible with hydrocarbon gas.
3. Product complies with the material requirements of NACE International MR0175 or MR0103. Environmental limits may apply.
4. Do not use in high aromatic hydrocarbon service.
Specications
Available Congurations
Type 67D: Direct-operated regulator with
aluminum body and without internal relief
Type 67DR: Aluminum body with internal relief
Type 67DS: Stainless steel body without
internal relief
Type 67DSR: Stainless steel body with internal relief
Type 67DF: Aluminum body with lter and without
internal relief
Type 67DFR: Aluminum body with lter and
internal relief
Type 67DFS: Stainless steel body with lter and without
internal relief
Type 67DFSR: Stainless steel body with lter and
internal relief
See also Table 1
Body Size, Inlet and Outlet Connection Style
1/2 NPT
Construction Materials
See Table 3
Maximum Inlet Pressure (Body Rating)(1)
All ltered models: 250 psig / 17.2 bar
All unltered models: 400 psig / 27.6 bar
Outlet Pressure Ranges
See Table 2
Maximum Emergency Outlet Pressure(1)
150 psi / 10.3 bar over outlet pressure setting up to a
maximum of 250 psi / 17.2 bar
Flow Capacities
See Table 4 and Capacity Information section
Wide-Open Flow Coefcients
Main Valve: Cg: 45.24; Cv: 1.33; C1: 35.02;
I
nternal Relief Valve: Cg: 1.45; Cv: 0.045; C1: 32.8
IEC Sizing Coefcients
Xt: 0.75
Types 67DR, 67DSR, 67DFR, and 67DFSR Internal
Relief Performance
Low capacity for minor seat leakage only, other
overpressure protection must be provided if inlet
pressure can exceed the maximum pressure rating
of downstream equipment or exceeds maximum
outlet pressure rating of the regulator.
Approximate Weights
Types 67D and 67DR: 1.2 pound / 0.5 kg
Types 67DF and 67DFR: 2.0 pounds / 0.9 kg
Types 67DS and 67DSR: 2.8 pounds / 1.2 kg
Types 67DFS and 67DFSR: 4.6 pounds / 2.1 kg
Smart Bleed™ Check Valve Setpoint
6 psi / 0.41 bar differential
Pressure Registration
Internal
Spring Case Vent Location
Aligned with inlet standard, other positions optional
Drain Valve Location
Aligned in the center of the dripwell
Temperature Capabilities(1)
With Nitrile (NBR)
Standard Bolting: -20 to 180°F / -29 to 82°C
Stainless Steel Bolting: -40 to 180°F / -40 to 82°C
With Fluorocarbon (FKM):
Polyethylene Filter(4) (Standard):
0 to 180°F / -18 to 82°C
Polyvinylidene (PVDF), Stainless Steel,
or Glass Filter (Optional):
0 to 300°F / -18 to 149°C
With Silicone (VMQ)(2) diaphragm, Low Temperature
Nitrile (NBR) O-rings, and Low Temperature
bolting: -60 to 180°F / -51 to 82°C
With Gauges: -40 to 180°F / -40 to 82°C
With Automatic drain: 40 to 175°F / 4 to 79°C
Types 67DF, 67DFR, 67DFS, and 67DFSR Filter Capabilities
Micron Rating:
Polyethylene Filter(4) (Standard): 5 microns
Glass Fiber Filter (Optional): 5 microns
PVDF Filter (Optional): 40 microns
Stainless Steel Filter (Optional): 40 microns
Options
All Types
• Handwheel adjusting screw
• NACE International MR0175 or MR0103(3) construction
• Panel mount (includes spring case with 1/4 NPT
vent, handwheel, and panel mounting nut)
• Closing cap (available on spring case with
1/4 NPT vent)
• Fluorocarbon (FKM) elastomers for high
temperatures and/or corrosive chemicals
• Silicone (VMQ) elastomers for cold temperatures
• Fixed Bleed Restriction
• Triple scale outlet pressure gauge (brass or
stainless steel)
• Stainless steel stem and valve plug
• Pipe plug in second outlet
Types 67DFR and 67DFSR only
• Smart Bleed internal check valve
Types 67DF, 67DFR, 67DFS, and 67DFSR
• Stainless steel drain valve
Bulletin 71.1:67D
4
MATERIAL TYPES
67D and 67DR 67DF and 67DFR 67DS and 67DSR 67DFS and 67DFSR
BODY AND
SPRING CASE Aluminum (ASTM B85/Alloy 380) CF8M/CF3M Stainless steel
SPRING RETAINER Aluminum Zinc-plated steel 316L Stainless steel
UPPER SPRING SEAT Zinc-plated steel 316 Stainless steel
DIAPHRAGM PLATE Chromate conversion coated Aluminum
CONTROL SPRING Plated steel or Inconel® (NACE) Inconel®
VALVE STEM
Brass, Aluminum, or Stainless steel 316L Stainless steel
VALVE PLUG
VALVE SPRING Stainless steel or Inconel® (NACE)
DIAPHRAGM
AND O-RINGS Nitrile (NBR), Fluorocarbon (FKM), Low Temp Nitrile (NBR), or Silicone (VMQ)(1)
SOFT SEAT AND GASKETS Nitrile (NBR) or Fluorocarbon (FKM)
BOLTING AND
ADJUSTING SCREW Zinc-plated steel or Stainless steel
HANDWHEEL Zinc-plated steel Zinc-plated steel or Stainless steel
FILTER RETAINER - - - - 316 Stainless steel - - - - 316 Stainless steel
FILTER ELEMENT - - - - Plastic, Glass ber,
or Stainless steel - - - - Plastic, Glass ber or
Stainless steel
DRAIN VALVE - - - - Brass or
18-8 Stainless steel - - - - 316 Stainless steel or
18-8 Stainless steel
DRIPWELL - - - - Aluminum
(ASTM B85/Alloy 380) - - - - CF8M/CF3M Stainless steel
1. Silicone (VMQ) diaphragm is only available with internal relief (Types 67DR, 67DSR, 67DFR, and 67DFSR).
Table 3. Construction Materials
Table 2. Outlet Pressure Ranges and Control Spring Data
TYPES OUTLET PRESSURE RANGES CONTROL SPRING DATA
Part Number Material Color Code Wire Diameter Free Length
psig bar Inches mm Inches mm
67D, 67DR,
67DF, and 67DFR
0 to 20
0 to 35
0 to 60
0 to 125
0 to 1.4
0 to 2.4
0 to 4.1
0 to 8.6
GE07809T012
T14059T0012
T14058T0012
T14060T0012
Music Wire
Green stripe
Silver
Blue stripe
Red stripe
0.135
0.156
0.170
0.207
3.43
3.96
4.32
5.26
1.43
1.43
1.43
1.43
36.2
36.2
36.2
36.2
0 to 35
0 to 60
0 to 125
0 to 2.4
0 to 4.1
0 to 8.6
T14113T0012
T14114T0012
T14115T0012
Inconel®
Silver stripe
Blue
Red
0.156
0.172
0.207
3.96
4.37
5.26
1.43
1.43
1.43
36.2
36.2
36.2
67DS, 67DSR,
67DFS, and 67DFSR
0 to 20
0 to 35
0 to 60
0 to 125
0 to 150
0 to 1.4
0 to 2.4
0 to 4.1
0 to 8.6
0 to 10.3
10C1729X012
T14113T0012
T14114T0012
T14115T0012
10C1730X012
Inconel®
Green
Silver stripe
Blue
Red
Black
0.135
0.156
0.172
0.207
0.250
3.43
3.96
4.37
5.26
6.35
1.50
1.43
1.43
1.43
1.77
38.1
36.2
36.2
36.2
44.9
TYPE
CONSTRUCTION FEATURES OPTIONAL FEATURES BODY MATERIAL
With Internal
Relief With Filter
Smart BleedTM
Internal Check
Valve Airset
Drain Valve External
Fixed Bleed Aluminum Stainless Steel
67D X
67DR X X X
67DS X
67DSR X X X
67DF X X X
67DFR X X X X X X
67DFS X X X
67DFSR X X X X X X
Table 1. Available Congurations
Inconel® is a mark owned by Special Metals Corporation.
Bulletin 71.1:67D
5
Principle of Operation (Figure 2)
Downstream pressure is registered internally on the lower side of
the diaphragm. When the downstream pressure is at or above
the set pressure, the valve plug is held against the ori ce and
there is no ow through the regulator. When demand increases,
downstream pressure drops slightly allowing the spring to
extend, moving the stem down and the valve plug away from the
ori ce. This allows ow through the regulator.
Internal Relief
(Types 67DR, 67DSR, 67DFR, and 67DFSR)
If for some reason, outside of normal operating conditions,
the downstream pressure exceeds the setpoint of the
regulator, the force created by the downstream pressure
will lift the diaphragm until the diaphragm is lifted off the
relief seat. This allows ow through the token relief. The
relief valve on the Type 67DR, 67DSR, 67DFR, or 67DFSR
is an elastomer plug that prevents leakage of air from
the downstream to atmosphere during normal operation,
thereby conserving plant air.
Smart Bleed™ Airset
In some cases, it is desired to exhaust downstream pressure
if inlet pressure is lost or drops below the setpoint of the
regulator. For example, if the regulator is installed on
equipment that at times has no ow demand but is expected
to back ow on loss of inlet pressure. The Type 67DFR or
67DFSR can be ordered with the Smart Bleed option which
includes an internal check valve for this application. During
operation, if inlet pressure is lost, or decreases below the
setpoint of the regulator, the downstream pressure will back
ow upstream through the regulator and check valve. This
option eliminates the need for a xed bleed downstream of
the regulator, thereby conserving plant air.
Note
During normal operation the check valve’s metal
to metal seat allows limited ow through the
regulator from the inlet to outlet, even when
there is no downstream demand. To prevent
downstream pressure buildup, the Smart Bleed
option is only avilable with the internal relief
version of the 67 Series.
Installation
The 67D Series regulators may be installed in any position.
Spring case vents must be protected against the entrance
of rain, snow, debris, or any other foreign material that might
plug the vent openings. The inlet connection is marked “In”
and the main outlet connection is marked “Out”. If a pressure
gauge is not installed in one of the two secondary outlet
connections, plug the unused connections. See Figures 4
and 5 for dimensions.
Emerson Process Management Regulator Technologies,
Inc. provides an instruction manual with every regulator
shipped. Refer to this for complete installation, operation and
maintenance instructions. Included is a complete listing of
individual parts and recommended spare parts.
Figure 2. 67D Series Operational Schematics
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
M1153 M1154
TYPE 67DR OR 67DSR TYPE 67DFR OR 67DFSR
TYPE 67D OR 67DS TYPE 67DF OR 67DFS
Type XXXX
MXXXX
Month Year Type XXXX
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
INTERMEDIATE PRESSURE
PILOT SUPPLY PRESSURE
LOADING PRESSURE
SMART BLEED™ OPTION FOR
TYPE 67DFR OR 67DFSR
Bulletin 71.1:67D
6
Note
The 67D Series regulators may be sized for 100%
ow using capacities as shown in Table 4. It is
not necessary to reduce published capacities.
To determine the equivalent capacities for other gases,
multiply the table capacity by the following appropriate
conversion factor: 1.29 for 0.6 specic gravity natural gas,
0.810 for propane, 0.707 for butane, or 1.018 for nitrogen.
For gases of other specic gravities, divide the table
capacities by the square root of the appropriate specic
gravity. To nd wide-open ow capacities for relief sizing at
any inlet pressure, perform one of the following procedures.
Then, if necessary, convert using the factors provided above.
For critical pressure drops (absolute outlet pressure equal
to or less than one-half of absolute inlet pressure), use the
following formula:
Q = (P1)(Cg)
For pressure drops lower than critical (absolute outlet
pressure greater than one-half of absolute inlet pressure),
use the following formula:
QCgP1SIN
=520
GT
3417
C1
)
)
P
P1
DEG
where,
Q = gas ow rate, SCFH
P1 =
absolute inlet pressure, psia (P
1
gauge + 14.7)
Cg = gas sizing coefcient
G = specic gravity of the gas
T = absolute temperature of gas at inlet, °Rankine
C1 = ow coefcient (Cg ÷ Cv)
P = pressure drop across the regulator, psi
Then, if capacity is desired in normal cubic meters per hour
(at 0°C and 1.01325 bar), multiply SCFH by 0.0268.
NACE Universal Compliance
Optional materials are available for applications handling sour
gases. These constructions comply with the recommendations
of NACE International sour service standards.
The manufacturing processes and materials used by
Regulator Technologies assure that all products specied
for sour gas service comply with the chemical, physical, and
metallurgical requirements of NACE MR0175 and/or NACE
MR0103. Customers have the responsibility to specify
correct materials. Environmental limitations may apply and
shall be determined by the user.
Overpressure Protection
The 67D Series regulators have maximum outlet pressure
ratings that are lower than their maximum inlet pressure
ratings. A pressure-relieving or pressure-limiting device is
needed if inlet pressure can exceed the maximum outlet
pressure rating.
Types 67DR, 67DSR, 67DFR, and 67DFSR regulators have
a low capacity internal relief valve for minor seat
leakage only.
Other overpressure protection must be
provided if the maximum
inlet pressure can exceed the maximum pressure rating of the
downstream equipment or exceeds maximum outlet pressure
rating of the Type 67DR, 67DSR, 67DFR, or 67DFSR regulator.
Overpressuring any portion of a regulator or associated
equipment may cause leakage, parts damage, or personal
injury due to bursting of pressure-containing parts or
explosion of accumulated gas. Regulator operation within
ratings does not preclude the possibility of damage from
external sources or from debris in the pipeline. A regulator
should be inspected for damage periodically and after any
overpressure condition.
Refer to the Capacity Information section and the Wide-
Open Flow Coefcients for Relief Valve Sizing in the
Specications section on page 3 to determine the required
relief valve capacity.
Capacity Information
Table 4 shows the air regulating capacities of the
67D Series regulators at selected inlet pressures and
outlet pressure settings. Flows are shown in SCFH (at
60°F and 14.7 psia) and in Nm3/h (at 0°C and 1.01325 bar)
of air.
Figure 3. 67D Series Vent Positions
GE31784
POSITION 1 (ALIGNED WITH INLET) (STANDARD)
POSITION 3
POSITION 2POSITION 4
Bulletin 71.1:67D
7
OUTLET PRESSURE
RANGE, SPRING PART
NUMBER AND
COLOR CODE
OUTLET
PRESSURE
INLET
PRESSURE
CAPACITIES IN SCFH / Nm3/h OF AIR
Types 67D, 67DR, 67DS, and 67DSR Types 67DF, 67DFR, 67DFS, and 67DFSR
psig bar psig bar
5% Droop 10% Droop 20% Droop 5% Droop 10% Droop 20% Droop
SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h
0 to 20 psig / 0 to 1.4 bar
GE07809T012
(Green Stripe)
10C1729X012
(Green)
5 0.34
25
50
75
100
150
200
250
400(1)
1.7
3.4
5.2
6.9
10.3
13.8
17.2
27.6
320
740
1000
750
850
240
290
370
8.6
19.8
26.8
20.1
22.8
6.4
7.8
9.9
530
1100
2700
3600
3200
810
460
590
14.2
29.5
72.4
96.5
85.8
21.7
12.3
15.8
950
2200
3200
4100
6100
6300
6300
2700
25.5
59.0
85.8
110
163
169
169
72.4
320
400
460
590
780
940
1000
- - - -
8.6
10.7
12.3
15.8
20.9
25.2
26.8
- - - -
400
540
850
2800
1700
1700
1800
- - - -
10.7
14.5
22.8
75.0
45.6
45.6
48.2
- - - -
600
1100
2600
2900
3900
2200
2200
- - - -
16.1
29.5
69.7
77.7
105
59.0
59.0
- - - -
10 0.69
25
50
75
100
150
200
250
400(1)
1.7
3.4
5.2
6.9
10.3
13.8
17.2
27.6
450
1100
2600
3900
3400
1200
850
470
12.1
29.5
69.7
104
91.1
32.2
22.8
12.6
790
1900
3200
4400
6600
7800
8000
3400
21.2
50.9
85.8
118
177
209
214
91.1
1100
2700
3900
5100
7400
7800
8000
4700
29.5
72.4
105
137
198
209
214
126
390
600
870
1100
2200
1900
2000
- - - -
10.5
16.1
23.3
29.5
59.0
50.9
53.6
- - - -
570
750
2100
3300
3200
2300
2400
- - - -
15.3
20.1
56.3
88.4
85.8
61.6
64.3
- - - -
830
1700
3100
3900
4800
4900
3300
- - - -
22.2
45.6
83.1
105
129
131
88.4
- - - -
20 1.4
50
75
100
150
200
250
400(1)
3.4
5.2
6.9
10.3
13.8
17.2
27.6
1500
2600
4500
6700
9000
11,200
5500
40.2
69.7
121
180
241
300
147
2100
3500
4900
7200
9400
11,200
6100
56.3
93.8
131
193
252
300
163
2600
3800
5100
7600
10,000
11,200
9100
69.7
102
137
204
268
300
244
870
1600
3600
4000
3300
2900
- - - -
23.3
42.9
96.5
107
88.4
77.7
- - - -
1500
2600
4300
6600
4700
5100
- - - -
40.2
69.7
115
177
126
137
- - - -
2100
3400
4600
6600
6900
7100
- - - -
56.3
91.1
123
177
185
190
- - - -
0 to 35 psig / 1 to 2.4 bar
T14059T0012 (Silver)
T14113T0012
(Silver Stripe)
15 1.0
25
50
75
100
150
200
250
400(1)
1.7
3.4
5.2
6.9
10.3
13.8
17.2
27.6
480
860
1200
2000
5000
1000
500
820
12.9
23.0
32.2
53.6
134
26.8
13.4
22.0
760
1500
2700
3900
5900
7600
8900
6400
20.4
40.2
72.4
104
158
204
239
172
1000
2200
3700
4800
7200
8800
9200
7400
26.8
59.0
99.2
129
193
236
247
198
360
720
870
1100
3400
2600
2700
- - - -
9.7
19.3
23.3
29.5
91.1
69.7
72.4
- - - -
520
1300
2100
3700
5700
4100
3300
- - - -
14.0
34.8
56.3
99.2
153
110
88.4
- - - -
800
2100
3500
4400
6400
5900
6000
- - - -
21.4
56.3
93.8
118
172
158
161
- - - -
20 1.4
25
50
75
100
150
200
250
400(1)
1.7
3.4
5.2
6.9
10.3
13.8
17.2
27.6
370
770
1100
1800
6200
2900
4900
830
9.9
20.6
29.5
48.2
166
77.7
131
22.2
570
1200
2600
4500
7000
7500
11,000
8300
15.3
32.2
69.7
121
188
201
295
222
810
1900
3800
5200
7500
7800
11,000
8300
21.7
50.9
102
139
201
209
295
222
420
880
1100
1800
3900
5600
4400
- - - -
11.3
23.6
29.5
48.2
104
150
118
- - - -
570
1500
2400
3800
6600
8700
8800
- - - -
15.3
40.2
64.3
102
177
233
236
- - - -
940
2300
3900
4800
7000
8700
8800
- - - -
25.2
61.6
105
129
188
233
236
- - - -
35 2.4
50
75
100
150
200
250
400(1)
3.4
5.2
6.9
10.3
13.8
17.2
27.6
1000
2000
2900
6700
9000
11,100
7600
26.8
53.6
77.7
180
241
297
204
1700
3200
4500
7100
9500
11,900
9300
45.6
85.8
121
190
255
319
249
2200
3700
5100
7600
9900
12,500
12,800
59.0
99.2
137
204
265
335
343
840
1500
2000
6300
8800
6000
- - - -
22.5
40.2
53.6
169
236
161
- - - -
1300
2500
3900
6800
9000
10,000
- - - -
34.8
67.0
104
182
241
268
- - - -
2000
3300
4700
7000
9000
10,000
- - - -
53.6
88.4
126
188
241
268
- - - -
1. Inlet pressures above 250 psig / 17.2 bar with a maximum of 400 psig / 27.6 bar are only available on unltered models (Types 67D, 67DR, 67DS, and 67DSR).
Table 4. 67D Series Flow Capacities
- continued -
Bulletin 71.1:67D
8
Ordering Information
When ordering, complete the Ordering Guide on pages 11
and 12. Refer to the Specications section on page 3.
Review the description to the right of each specication and
the information in each referenced table or gure. Specify
your choice whenever a selection is offered.
Table 4. 67D Series Flow Capacities (continued)
OUTLET PRESSURE
RANGE, SPRING PART
NUMBER AND COLOR
CODE
OUTLET
PRESSURE
INLET
PRESSURE
CAPACITIES IN SCFH / Nm3/h OF AIR
Types 67D, 67DR, 67DS, and 67DSR Types 67DF, 67DFR, 67DFS, and 67DFSR
psig bar psig bar
5% Droop 10% Droop 20% Droop 5% Droop 10% Droop 20% Droop
SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h
0 to 60 psig /
0 to 4.1 bar
T14058T0012 (Blue Stripe)
T14114T0012 (Blue)
35 2.4
50
75
100
150
200
250
400(1)
3.4
5.2
6.9
10.3
13.8
17.2
27.6
850
1400
1900
6600
9200
11,200
1100
22.8
37.5
50.9
177
247
300
29.5
1400
2500
4100
7100
9600
11,500
11,900
37.5
67.0
110
190
257
308
319
2100
3600
5100
7600
10,200
11,500
11,900
53.6
96.5
137
204
273
308
319
690
1000
1600
3100
7200
9500
- - - -
18.5
26.8
42.9
83.1
193
255
- - - -
1100
1900
2700
5600
8400
9500
- - - -
29.5
50.9
72.4
150
225
255
- - - -
1800
2900
4300
6600
8900
9500
- - - -
48.2
77.7
115
177
239
255
- - - -
60 4.1
75
100
150
200
250
400(1)
5.2
6.9
10.3
13.8
17.2
27.6
1200
2100
4300
9200
11,900
4000
32.2
56.3
115
247
319
107
2200
3600
6900
9700
12,400
18,000
59.0
96.5
185
260
332
482
3000
4600
7600
10,200
12,800
18,000
80.4
123
204
273
343
482
920
1500
2600
4300
9500
- - - -
24.7
40.2
69.7
115
255
- - - -
1600
2500
5200
8300
10,600
- - - -
42.9
67.0
139
222
284
- - - -
2600
4000
6600
8800
11,100
- - - -
69.7
107
177
236
297
- - - -
0 to 125 psig /
0 to 8.6 bar
T14060T0012 (Red Stripe)
T14115T0012 (Red)
60 4.1
75
100
135
150
200
250
400(1)
5.2
6.9
9.3
10.3
13.8
17.2
27.6
690
1000
1500
1700
2500
5600
3500
18.5
26.8
40.2
45.6
67.0
150
93.8
1200
1900
3000
3500
6000
8100
17,900
32.2
50.9
80.4
93.8
161
217
480
2000
3000
4600
5300
7700
9300
17,900
53.6
80.4
123
142
206
249
480
670
1000
1300
1400
1800
2400
- - - -
18.0
26.8
34.8
37.5
48.2
64.3
- - - -
1100
1800
2500
2800
4100
6600
- - - -
29.5
48.2
67.0
75.0
110
177
- - - -
2000
2900
4300
5200
7600
10,200
- - - -
53.6
77.7
115
139
204
273
- - - -
80 5.5
100
135
150
200
250
400(1)
6.9
9.3
10.3
13.8
17.2
27.6
1000
1600
1900
2900
4200
3700
26.8
42.9
50.9
77.7
113
99.2
1700
3000
3700
6000
10,200
19,900
45.6
80.4
99.2
161
273
533
2900
4600
5400
7700
12,200
10,400
77.7
123
145
206
327
279
960
1500
1700
2200
2900
- - - -
25.7
40.2
45.6
59.0
77.7
- - - -
1700
2800
3100
4800
7100
- - - -
45.6
75.0
83.1
129
190
- - - -
3000
4600
5300
8000
10,600
- - - -
80.4
123
142
214
284
- - - -
125 8.6
135
150
200
250
400(1)
9.3
10.3
13.8
17.2
27.6
1500
2100
3800
5800
6800
40.2
56.3
102
155
182
2500
3200
5600
7800
19,400
67.0
85.8
150
209
520
3500
4300
6700
9000
20,900
93.8
115
180
241
560
1600
1800
2900
4100
- - - -
42.9
48.2
77.7
110
- - - -
2700
3200
5200
7800
- - - -
72.4
85.8
139
209
- - - -
4400
5200
8000
10,400
- - - -
118
139
214
279
- - - -
0 to 150 psig /
0 to 10.3 bar(2)
10C1730X012 (Black)
110 7.6
150
200
250
400(1)
10.3
13.8
17.2
27.6
1900
2700
3400
4200
50.9
72.4
91.1
113
3300
4800
6200
11,300
88.4
129
166
303
5500
8300
10,500
19,100
147
222
281
512
2000
2600
3400
- - - -
53.6
69.7
91.1
- - - -
3400
4800
6000
- - - -
91.1
129
161
- - - -
5600
8000
10,400
- - - -
150
214
279
- - - -
135 9.3
150
200
250
400(1)
10.3
13.8
17.2
27.6
1800
3000
3900
6400
48.2
80.4
105
172
3300
5400
6700
13,300
88.4
145
180
356
5600
8300
10,700
19,300
150
222
287
517
1800
2800
3700
- - - -
48.2
75.0
99.2
- - - -
3200
5100
6600
- - - -
85.8
137
177
- - - -
5500
8200
11,000
- - - -
147
220
295
- - - -
150 10.3
200
250
400(1)
13.8
17.2
27.6
2900
4000
6400
77.7
107
172
5200
7400
13,900
139
198
373
8300
11,000
19,700
222
295
528
2900
4100
- - - -
77.7
110
- - - -
5200
7300
- - - -
139
196
- - - -
8200
11,000
- - - -
220
295
- - - -
1. Inlet pressures above 250 psig / 17.2 bar with a maximum of 400 psig / 27.6 bar are only available on unltered models (Types 67D, 67DR, 67DS, and 67DSR).
2. Available for Types 67DS, 67DSR, 67DFS, and 67DFSR only.
Bulletin 71.1:67D
9
Figure 4. Types 67D, 67DR, 67DS, and 67DSR Dimensions
TYPES
DIMENSIONS
A B C D EF G
Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm
67D and 67DR 2.35 60 3.66 93 4.54 115 2.98 76 1.49 38 2.75 70 0.63 16
67DS and 67DSR 5.12 130
INCHES /
mm
STANDARD DIMENSIONS FOR GAUGE OPTION STANDARD DIMENSIONS
C
D
E
B MAX
A
SIDE OUTLET
1/4 NPT
OPTIONAL
GAUGE
SIDE OUTLET
1/4 NPT
OUTLET
CONNECTION
1/2 NPT
INLET CONNECTION
1/2 NPT
GG01138
F
G
VENT
B
A
C
D
E
SIDE OUTLET
1/4 NPT
1.33 /
34
OPTIONAL
GAUGE
SIDE OUTLET
1/4 NPT
VENT
1/4 NPT
OUTLET CONNECTION
1/2 NPT
INLET CONNECTION
1/2 NPT
CLOSING CAP
F
G
GG01145
1.44 /
37
TYPE 67DS OR 67DSR
TYPE 67D OR 67DR
OUTLET PRESSURE
RANGE, SPRING PART
NUMBER AND COLOR
CODE
OUTLET
PRESSURE
INLET
PRESSURE
CAPACITIES IN SCFH / Nm3/h OF AIR
Types 67D, 67DR, 67DS, and 67DSR Types 67DF, 67DFR, 67DFS, and 67DFSR
psig bar psig bar
5% Droop 10% Droop 20% Droop 5% Droop 10% Droop 20% Droop
SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h
0 to 60 psig /
0 to 4.1 bar
T14058T0012 (Blue Stripe)
T14114T0012 (Blue)
35 2.4
50
75
100
150
200
250
400(1)
3.4
5.2
6.9
10.3
13.8
17.2
27.6
850
1400
1900
6600
9200
11,200
1100
22.8
37.5
50.9
177
247
300
29.5
1400
2500
4100
7100
9600
11,500
11,900
37.5
67.0
110
190
257
308
319
2100
3600
5100
7600
10,200
11,500
11,900
53.6
96.5
137
204
273
308
319
690
1000
1600
3100
7200
9500
- - - -
18.5
26.8
42.9
83.1
193
255
- - - -
1100
1900
2700
5600
8400
9500
- - - -
29.5
50.9
72.4
150
225
255
- - - -
1800
2900
4300
6600
8900
9500
- - - -
48.2
77.7
115
177
239
255
- - - -
60 4.1
75
100
150
200
250
400(1)
5.2
6.9
10.3
13.8
17.2
27.6
1200
2100
4300
9200
11,900
4000
32.2
56.3
115
247
319
107
2200
3600
6900
9700
12,400
18,000
59.0
96.5
185
260
332
482
3000
4600
7600
10,200
12,800
18,000
80.4
123
204
273
343
482
920
1500
2600
4300
9500
- - - -
24.7
40.2
69.7
115
255
- - - -
1600
2500
5200
8300
10,600
- - - -
42.9
67.0
139
222
284
- - - -
2600
4000
6600
8800
11,100
- - - -
69.7
107
177
236
297
- - - -
0 to 125 psig /
0 to 8.6 bar
T14060T0012 (Red Stripe)
T14115T0012 (Red)
60 4.1
75
100
135
150
200
250
400(1)
5.2
6.9
9.3
10.3
13.8
17.2
27.6
690
1000
1500
1700
2500
5600
3500
18.5
26.8
40.2
45.6
67.0
150
93.8
1200
1900
3000
3500
6000
8100
17,900
32.2
50.9
80.4
93.8
161
217
480
2000
3000
4600
5300
7700
9300
17,900
53.6
80.4
123
142
206
249
480
670
1000
1300
1400
1800
2400
- - - -
18.0
26.8
34.8
37.5
48.2
64.3
- - - -
1100
1800
2500
2800
4100
6600
- - - -
29.5
48.2
67.0
75.0
110
177
- - - -
2000
2900
4300
5200
7600
10,200
- - - -
53.6
77.7
115
139
204
273
- - - -
80 5.5
100
135
150
200
250
400(1)
6.9
9.3
10.3
13.8
17.2
27.6
1000
1600
1900
2900
4200
3700
26.8
42.9
50.9
77.7
113
99.2
1700
3000
3700
6000
10,200
19,900
45.6
80.4
99.2
161
273
533
2900
4600
5400
7700
12,200
10,400
77.7
123
145
206
327
279
960
1500
1700
2200
2900
- - - -
25.7
40.2
45.6
59.0
77.7
- - - -
1700
2800
3100
4800
7100
- - - -
45.6
75.0
83.1
129
190
- - - -
3000
4600
5300
8000
10,600
- - - -
80.4
123
142
214
284
- - - -
125 8.6
135
150
200
250
400(1)
9.3
10.3
13.8
17.2
27.6
1500
2100
3800
5800
6800
40.2
56.3
102
155
182
2500
3200
5600
7800
19,400
67.0
85.8
150
209
520
3500
4300
6700
9000
20,900
93.8
115
180
241
560
1600
1800
2900
4100
- - - -
42.9
48.2
77.7
110
- - - -
2700
3200
5200
7800
- - - -
72.4
85.8
139
209
- - - -
4400
5200
8000
10,400
- - - -
118
139
214
279
- - - -
0 to 150 psig /
0 to 10.3 bar(2)
10C1730X012 (Black)
110 7.6
150
200
250
400(1)
10.3
13.8
17.2
27.6
1900
2700
3400
4200
50.9
72.4
91.1
113
3300
4800
6200
11,300
88.4
129
166
303
5500
8300
10,500
19,100
147
222
281
512
2000
2600
3400
- - - -
53.6
69.7
91.1
- - - -
3400
4800
6000
- - - -
91.1
129
161
- - - -
5600
8000
10,400
- - - -
150
214
279
- - - -
135 9.3
150
200
250
400(1)
10.3
13.8
17.2
27.6
1800
3000
3900
6400
48.2
80.4
105
172
3300
5400
6700
13,300
88.4
145
180
356
5600
8300
10,700
19,300
150
222
287
517
1800
2800
3700
- - - -
48.2
75.0
99.2
- - - -
3200
5100
6600
- - - -
85.8
137
177
- - - -
5500
8200
11,000
- - - -
147
220
295
- - - -
150 10.3
200
250
400(1)
13.8
17.2
27.6
2900
4000
6400
77.7
107
172
5200
7400
13,900
139
198
373
8300
11,000
19,700
222
295
528
2900
4100
- - - -
77.7
110
- - - -
5200
7300
- - - -
139
196
- - - -
8200
11,000
- - - -
220
295
- - - -
1. Inlet pressures above 250 psig / 17.2 bar with a maximum of 400 psig / 27.6 bar are only available on unltered models (Types 67D, 67DR, 67DS, and 67DSR).
2. Available for Types 67DS, 67DSR, 67DFS, and 67DFSR only.
Table 5. Types 67D, 67DR, 67DS, and 67DSR Dimensions
Bulletin 71.1:67D
10
Figure 5. Types 67DF, 67DFR, 67DFS, and 67DFSR Dimensions
TYPES
DIMENSIONS
A B C D EF G H I
Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm
67DF and 67DFR 5.93 151 3.66 93 4.54 115 2.98 76 1.49 38 2.88 73 0.63 16 0.69 18 2.25 57
67DFS and 67DFSR 6.27 159 5.12 130
SIDE OUTLET
1/4 NPT
SIDE OUTLET
1/4 NPT
VENT
B MAX
A
D
C
E
OPTIONAL
GAUGE
OUTLET CONNECTION
1/2 NPT
MOUNTING HOLES
FOR 5/16 / 7.9
DIAMETER BOLTS
I
2.92 / 74
H
INLET CONNECTION
1/2 NPT
F
G
INCHES /
mm
GG01139
C
D
E
B
A
SIDE OUTLET
1/4 NPT
OPTIONAL
GAUGE
1.33 /
34
VENT
1/4 NPT
SIDE OUTLET
1/4 NPT
INLET CONNECTION
1/2 NPT
OUTLET CONNECTION
1/2 NPT
MOUNTING HOLES
FOR 5/16 / 7.9
DIAMETER BOLTS
H
I
CLOSING CAP
G
F
GG01135
STANDARD DIMENSIONS FOR GAUGE OPTION STANDARD DIMENSIONS
TYPE 67DF OR 67DFR
TYPE 67DFS OR 67DFSR
Table 6. Types 67DF, 67DFR, 67DFS, and 67DFSR Dimensions
Bulletin 71.1:67D
11
Ordering Guide
Type (Select One)
67D (aluminum without internal relief)***
67DR (aluminum with internal relief)***
67DS (stainless steel without
internal relief)***
67DSR (stainless steel with internal relief)***
67DF (aluminum with lter and without
internal relief)***
67DFR (aluminum with lter and
internal relief)***
67DFS (stainless steel with lter and without
internal relief)***
67DFSR (stainless steel with lter and
internal relief)***
Quantity (Specify)
Spring Case Style (Select One)
Drilled hole vent (Types 67D, 67DR, 67DF, and
67DFR standard)***
1/4 NPT vent (Types 67DS, 67DSR, 67DFS,
and 67DFSR standard)***
Single hole panel mount***
Adjusting Screw (Select One)
Square head (Types 67D, 67DR, 67DF,
67DFR standard)***
Square head with closing cap (Types 67DS,
67DSR, 67DFS, and 67DFSR standard)***
Handwheel***
Outlet Pressure Range (Select One)
0 to 20 psig / 0 to 1.4 bar***
0 to 35 psig / 0 to 2.4 bar***
0 to 60 psig / 0 to 4.1 bar***
0 to 125 psig / 0 to 8.6 bar***
0 to 150 psig / 0 to 10.3 bar (Types 67DS, 67DSR,
67DFS, and 67DFSR only)***
Diaphragm, O-Rings, and Valve Seat Plug (Select One)
Nitrile (NBR) (standard)***
Fluorocarbon (FKM)**
Silicone (VMQ) diaphragm, Low Temperature
Nitrile (NBR) O-rings, and Nitrile (NBR) valve seat*
Filter Material (Select One)
Polyethylene (5 microns) (standard)***
Glass (5 microns)***
Polyvinylidene (PVDF) (40 microns)***
Stainless steel (40 microns)***
Drain Valve (Select One)
Brass (Types 67DF and 67DFR standard)***
Stainless steel (Types 67DFS and
67DFSR standard)***
Automatic Drain with Nitrile (NBR) elastomers***
Automatic Drain with Fluorocarbon (FKM) elastomers**
Spring Case Vent Location (Select One)
Position 1 - Aligned with inlet (standard)***
Position 2
Position 3
Position 4
External Fixed Bleed for Type 67DR, 67DSR, 67DFR, or
67DFSR (Optional)
Yes**
Smart Bleed™ Internal Check Valve Airset
(Optional - Types 67DFR and 67DFSR only)
Yes**
Second Outlet (Select One)
Open (Types 67D, 67DR, 67DF, and
67DFR standard)***
Plugged with pipe plug (Types 67DS, 67DSR,
67DFS, and 67DFSR standard)***
Pressure Gauge (see below)
Triple Scale Pressure Gauge (Optional)
Brass Gauge or Stainless Steel Gauge
0 to 30 psig / 0 to 0.2 MPa / 0 to 2.1 bar***
0 to 60 psig / 0 to 0.4 MPa / 0 to 4.1 bar***
0 to 160 psig / 0 to 1.1 MPa / 0 to 11.0 bar***
TYPES
DIMENSIONS
A B C D EF G H I
Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm
67DF and 67DFR 5.93 151 3.66 93 4.54 115 2.98 76 1.49 38 2.88 73 0.63 16 0.69 18 2.25 57
67DFS and 67DFSR 6.27 159 5.12 130
- continued -
Bulletin 71.1:67D
©Emerson Process Management Regulator Technologies, Inc., 2009, 2012; All Rights Reserved
The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher is a mark owned by Fisher Controls International LLC,
a business of Emerson Process Management.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specications of such
products at any time without notice.
Emerson Process Management does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Emerson
Process Management product remains solely with the purchaser.
Industrial Regulators
Emerson Process Management
Regulator Technologies, Inc.
USA - Headquarters
McKinney, Texas 75069-1872, USA
Tel: +1 800 558 5853
Outside U.S. +1 972 548 3574
Asia-Pacic
Shanghai 201206, China
Tel: +86 21 2892 9000
Europe
Bologna 40013, Italy
Tel: +39 051 419 0611
Middle East and Africa
Dubai, United Arab Emirates
Tel: +971 4811 8100
Natural Gas Technologies
Emerson Process Management
Regulator Technologies, Inc.
USA - Headquarters
McKinney, Texas 75069-1872, USA
Tel: +1 800 558 5853
Outside U.S. +1 972 548 3574
Asia-Pacic
Singapore 128461, Singapore
Tel: +65 6770 8337
Europe
Bologna 40013, Italy
Tel: +39 051 419 0611
Gallardon 28320, France
Tel: +33 2 37 33 47 00
TESCOM
Emerson Process Management
Tescom Corporation
USA - Headquarters
Elk River, Minnesota 55330-2445, USA
Tels: +1 763 241 3238
+1 800 447 1250
Europe
Selmsdorf 23923, Germany
Tel: +49 38823 31 287
Asia-Pacic
Shanghai 201206, China
Tel: +86 21 2892 9499
For further information visit www.fisherregulators.com
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
* Special Order, Constructed from Non-Stocked Parts.
Consult Your local Sales Ofce for Availability.
Availability of the product being ordered is determined by the component
with the longest shipping time for the requested construction.
Specication Worksheet
Application (Please designate units):
Specic Use
Line Size
Gas Type and Specic Gravity
Gas Temperature
Does the Application Require Overpressure Protection?
Yes No If yes, which is preferred:
Relief Valve Monitor Regulator
Shut-off Device
Is overpressure protection equipment selection assistance
desired?
Pressure (Please designate units):
Maximum Inlet Pressure (P1max)
Minimum Inlet Pressure (P1min)
Downstream Pressure Setting(s) (P2)
Maximum Flow (Qmax)
Performance Required:
Accuracy Requirements?
Need for Extremely Fast Response?
Other Requirements:
Ordering Guide (continued)
NACE International MR0175 Construction (Optional)(1)
Yes (not available with gauge)**
NACE International MR0103 Construction (Optional)
Yes (not available with gauge)**
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match
this order.
1. Product complies with the material requirements of NACE International MR0175.
Environmental limits may apply.
